[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] 6-point cell?

To: "me" <polaris@gsinet.net>, <atm@atmlist.net>
Subject: Re: [ATM] 6-point cell?
From: "Ken Reid" <ken_reid@telus.net>
Date: Thu, 10 Feb 2005 13:07:09 -0800
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <000e01c50f09$52ec7e40$6501a8c0@grownups>
Sender: atm-bounces@atmlist.net

----- Original Message ----- 
From: "me" <polaris@gsinet.net>
To: <atm@atmlist.net>
Sent: Wednesday, February 09, 2005 4:41 PM
Subject: [ATM] 6-point cell?

Hi,
 I've got a 10" f/6 1.6" thick mirror which I am making a cell for. I am
planning a 6-point cell, using RTV.
________________snip______

I cut an equilateral triangle from 3/8" Alum. and pressed 12mm. bearings
into Al flatbar. How you incorporate edge support is the clincher. Same
mirror.

cheers,
KR
P.S.  Sonotube is for concrete...

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] 6-point cell?
  - From: "me" <polaris@gsinet.net>

Prev by Author: Re: Fwd: [ATM] Open Question Concerning Pitch Laps
Next by Author: Re: [ATM] Forced Ventilation / Whic way does the wind go?
Prev by thread: Re: [ATM] 6-point cell?
Next by thread: RE: [ATM] 6-point cell?
Index(es):
- Author
- Thread