[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] 6-point cell?

To: <atm@atmlist.net>
Subject: Re: [ATM] 6-point cell?
From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
Date: Thu, 10 Feb 2005 12:35:01 +0100
Cc: polaris@gsinet.net
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <HNEXFE10ujsclWXSZ3Z00021a14@hnexfe10.hetnet.nl>
Sender: atm-bounces@atmlist.net

Rob,

You will get away with three blobs, at 40-45% radius, resulting in appr.
2.5nm surface deformation.

Arjan

> I've got a 10" f/6 1.6" thick mirror which I am making a cell for. I am
planning a 6-point cell, using




_______________________________________________
ATM mailing list http://www.atmlist.net/

Prev by Author: Re: [ATM] asymptote to ambient
Next by Author: Re: [ATM] Cooling of a primary Mirror
Prev by thread: RE: [ATM] 6-point cell?
Next by thread: Re: [ATM] 6-point cell?
Index(es):
- Author
- Thread