Amateur Telescope Makers (ATM) Archive for FEB04 - by thread

• Author Index

• [ATM] (no subject), Wolfgang Rohr
  • [ATM] Cloudy Nights, Jack Schmidling
    • [ATM] Cloudy Nights, Thomas
      • [ATM] Cloudy Nights, Charles Mitchard
  • <Possible follow-up(s)>
  • [ATM] (no subject), William Lee
  • [ATM] (no subject), Gil Gagne
• [ATM] 2 Tube Truss, Samuel DiRocco
• [ATM] 4.5" Truss Dob, Torquil MacCorkle, III
  • [ATM] 4.5" Truss Dob, Stuart Hutchins
    • [ATM] 4.5" Truss Dob, Torquil MacCorkle, III
      • [ATM] 4.5" Truss Dob, Stuart Hutchins
      • [ATM] 4.5" Truss Dob, Torquil MacCorkle, III
      • [ATM] 4.5" Truss Dob, Thomas
      • [ATM] 4.5" Truss Dob, Stuart Hutchins
  • [ATM] 4.5" Truss Dob, Gary Seronik
  • <Possible follow-up(s)>
  • Fwd: [ATM] 4.5" Truss Dob, Matthew L. Brown
• [ATM] 81-point PLOP cell design, Jeff Anderson-Lee
• [ATM] 96% Silica, lance clarke
  • [ATM] 96% Silica, Ken Hunter
  • [ATM] 96% Silica, Stan Truitt
  • <Possible follow-up(s)>
  • [ATM] 96% Silica, mdholm@telerama.com
  • [ATM] 96% Silica, lance clarke
• [ATM] [Fwd: Mounting article]], Dan Croskrey
• [ATM] A new Foucault analysis program, Mark Holm
• [ATM] AAUUUHHGGG!!!!!! what the &*^% is that?, c f
  • [ATM] AAUUUHHGGG!!!!!! what the &*^% is that?, Ross Sackett
  • <Possible follow-up(s)>
  • Fwd: Re: [ATM] AAUUUHHGGG!!!!!! what the &*^% is that?, Matthew L. Brown
  • [ATM] AAUUUHHGGG!!!!!! what the &*^% is that?, Royston_Jeremy@emc.com
• [ATM] Aligning Ronchi screens, Hugues.Laroche@ses-astra.com
  • [ATM] Aligning Ronchi screens, Bob May
• [ATM] ATM: FringeXP comparison -Phase shifting, Vladimir Galogaza
• [ATM] ATM: Source for UPSing Collodion USP, Shankland, CDR-Paul
  • [ATM] ATM: Source for UPSing Collodion USP, Ken Hunter
• [ATM] ATM: Thoughts about mirror cell design from a stubbornRTV-head, Bruce Sayre
  • [ATM] ATM: Thoughts about mirror cell design from a stubbornRTV-head, Michael Lindner
    • [ATM] ATM: Thoughts about mirror cell design from astubbornRTV-head, Mel Bartels
• [ATM] automated testing helps cure low edge zone, Jeff Anderson-Lee
• [ATM] Back of my blank, Shane LaPierre
  • [ATM] Back of my blank, Peter
  • [ATM] Back of my blank, Jerry B. Hillman
  • <Possible follow-up(s)>
  • FW: [ATM] Back of my blank, mlbrown@everstrive.com
  • [ATM] Back of my blank, david.a.stevens@gm.com
    • [ATM] Back of my blank, Shane LaPierre
• [ATM] binocular views, Charles Mitchard
  • [ATM] binocular views, Ross Sackett
    • [ATM] Re: binocular views, fabio@voreas.com
• [ATM] Black black (and butterflies), David Nicholls
  • [ATM] Black black (and butterflies), Vladimir Galogaza
    • [ATM] Black black (and butterflies), Peter
• [ATM] Bob May?, Bernard Maugoust
  • [ATM] Bob May?, Jim Miller
• [ATM] Cassegrain Baffles, Scott Rychnovsky
  • [ATM] Cassegrain Baffles, Jeff Anderson-Lee
  • [ATM] Cassegrain Baffles, Daniel Fundo
  • [ATM] Cassegrain Baffles, Aart Olsen
  • <Possible follow-up(s)>
  • [ATM] Cassegrain Baffles, J&S
• [ATM] Cell design and collimation stress, Joe
  • [ATM] Cell design and collimation stress, Mel Bartels
• [ATM] Clarifying the Sharpie Test, Peter
  • [ATM] Clarifying the Sharpie Test, Ken Hunter
  • <Possible follow-up(s)>
  • [ATM] Clarifying the Sharpie Test, Chris Plicht
    • [ATM] Clarifying the Sharpie Test, Kevin Whitefire
      • [ATM] Clarifying the Sharpie Test, Bob May
• [ATM] Classical Cassegrain Design Tradeoff Help Needed, Kevin Whitefire
  • <Possible follow-up(s)>
  • [ATM] Classical Cassegrain Design Tradeoff Help Needed, Kevin Whitefire
• [ATM] Cleaning mirrors, Bill Kelley
  • [ATM] Cleaning mirrors, James Lerch
• [ATM] cloudy nites III, Ina Ron Lippard Renaissance Reproductions
• [ATM] Collapsible Dobsonian, Clive
  • [ATM] Collapsible Dobsonian, Peter
  • [ATM] Collapsible Dobsonian, Richard Klappal
  • <Possible follow-up(s)>
  • [ATM] Collapsible Dobsonian, Clive
• [ATM] Conic Constant, Ray@J-Engineering.com
  • [ATM] Conic Constant, Bill Marriott
    • [ATM] Conic Constant, Mike Spooner
    • [ATM] Conic Constant, Mel Bartels
  • [ATM] Conic Constant, Bob May
  • <Possible follow-up(s)>
  • [ATM] Conic Constant, Mark Holm
• [ATM] Conical Mirrors, Peter
  • [ATM] Conical Mirrors, Scott Rychnovsky
  • [ATM] Conical Mirrors, Doug Williams
    • [ATM] Conical Mirrors - central bolts?, Mark Cowan
• [ATM] Cu3Sn Progress, Anthony Stillman
  • [ATM] Cu3Sn Progress, Guy Brandenburg
• [ATM] Dall-Kirkham Coma Reduction?, John Spero
  • [ATM] Dall-Kirkham Coma Reduction?, Michael Peck
• [ATM] Determining Stepper Motor Size, Stanley A. Gorodenski
  • [ATM] Determining Stepper Motor Size, Frank
  • <Possible follow-up(s)>
  • Fwd: Re: [ATM] Determining Stepper Motor Size, Matthew L. Brown
    • [ATM] Re: ATMList Traffic, Daniel Fundo
      • [ATM] Re: ATMList Traffic, Art
• [ATM] Dew shield., Marco Miglionico
  • [ATM] Dew shield., Dale Eason
  • [ATM] Dew shield., Don Clement
  • [ATM] Dew shield., Bernard Maugoust
• [ATM] Diagonal Holder Design, Torquil MacCorkle, III
  • [ATM] Diagonal Holder Design, Ken Lowther
• [ATM] Digital Setting Circles, Torquil MacCorkle, III
  • [ATM] Digital Setting Circles, Gordon Tulloch
• [ATM] Dog Biscuit, Ray@J-Engineering.com
  • [ATM] Dog Biscuit, Dale Eason
  • [ATM] Dog Biscuit, Jerry
  • <Possible follow-up(s)>
  • [ATM] Dog Biscuit, Mark Holm
  • [ATM] Dog Biscuit, Jerry
    • [ATM] Dog Biscuit, Ray@J-Engineering.com
• [ATM] Don't Get Your Mirror in a Sling, Stuart Hutchins
  • [ATM] Don't Get Your Mirror in a Sling, Jeff Anderson-Lee
    • [ATM] Don't Get Your Mirror in a Sling, Stuart Hutchins
      • [ATM] Don't Get Your Mirror in a Sling, Robert Turner
      • [ATM] Don't Get Your Mirror in a Sling, Dale Eason
• [ATM] Doublet, Richard F.L.R. Snashall
  • [ATM] Doublet, Richard F.L.R. Snashall
    • [ATM] Doublet, Richard F.L.R. Snashall
• [ATM] Equatorial mount motors, Peter Pissias
  • [ATM] Equatorial mount motors, Renato Bonomini
  • [ATM] Equatorial mount motors, Kevin Whitefire
• [ATM] extreme raised edge, Matheus Jatkoske Lazo
  • [ATM] Spherometer, David Bevel
    • [ATM] Spherometer, Richard Ozer
      • [ATM] Spherometer, Daniel Fundo
    • [ATM] Spherometer, George Anderson
  • [ATM] extreme raised edge, Guy Brandenburg
  • [ATM] extreme raised edge, Bob May
  • [ATM] extreme raised edge, Jim Burrows
• [ATM] Eyepiece questions, Art
  • [ATM] Eyepiece questions, Bob May
• [ATM] Figuring an 8" F6. Please help, Scotto1234@aol.com
  • [ATM] Figuring an 8" F6. Please help, Jim Burrows
  • [ATM] Figuring an 8" F6. Please help, Jack Day
  • [ATM] Figuring an 8" F6. Please help, Bob May
  • [ATM] Figuring an 8" F6. Please help, Bradley Davy
  • <Possible follow-up(s)>
  • [ATM] Figuring an 8" F6. Please help, Scotto1234@aol.com
    • [ATM] Figuring an 8" F6. Please help, Vladimir Galogaza
    • [ATM] Figuring an 8" F6. Please help, Jim Burrows
  • [ATM] Figuring an 8" F6. Please help, Mark Holm
• [ATM] finishes and sky-rock, Ina Ron Lippard Renaissance Reproductions
  • [ATM] finishes and sky-rock, Ken Lowther
• [ATM] first figuring of my first mirror, what did I do wrong?, Scotto1234@aol.com
  • [ATM] first figuring of my first mirror, what did I do wrong?, Bob May
• [ATM] Flex / Potato Chip / Astigmatism question, Ian McKernan
  • [ATM] Flex / Potato Chip / Astigmatism question, Bill Kelley
• [ATM] Flexed paraboloid Mirrors - websites?, Shankland, CDR-Paul
  • [ATM] Flexed paraboloid Mirrors - websites?, Bill Kelley
• [ATM] Floppy Disk, was: New? Idea for mirror support, NGC704@aol.com
  • <Possible follow-up(s)>
  • [ATM] Floppy Disk, was: New? Idea for mirror support, mdholm@telerama.com
• [ATM] Foucault test errors due to source and knife edge separation, Royston_Jeremy@emc.com
  • [ATM] Foucault test errors due to source and knife edge separation, Bob May
  • Message not available
    • [ATM] Foucault test errors due to source and knife edge separation, Jim Burrows
• [ATM] Fw: Sixtests and P-V Error, Ulhas Deshpande
  • [ATM] Fw: Sixtests and P-V Error, Vladimir Galogaza
    • [ATM] Fw: Sixtests and P-V Error, Dale Eason
  • [ATM] Fw: Sixtests and P-V Error, Jim Burrows
• [ATM] Ghosting in a Refractor, Ian McKernan
  • [ATM] Ghosting in a Refractor, Kurt Clement
    • [ATM] Ghosting in a Refractor, Stuart Hutchins
• [ATM] Gregorian Secondary Size, Mark Graybill
• [ATM] Happy Groundhog's Day, Richard F.L.R. Snashall
• [ATM] How many zones, Jonathan Bishop
  • [ATM] How many zones, Alejandro Fernandez
  • [ATM] How many zones, Ken Lowther
  • [ATM] How many zones, Ken Lowther
  • [ATM] How many zones, Mark Cowan
  • [ATM] How many zones, Jim Burrows
  • <Possible follow-up(s)>
  • FW: Re: [ATM] How many zones, mlbrown@everstrive.com
  • [ATM] How many zones, Mark Holm
    • [ATM] How many zones, Jonathan Bishop
      • Message not available
      • [ATM] How many zones, Jonathan Bishop
  • [ATM] How many zones, Mark Holm
• [ATM] HTML, Joseph Goins
• [ATM] I think a TDE?, c f
  • <Possible follow-up(s)>
  • [ATM] I think a TDE?, gfbranden@earthlink.net
• [ATM] If it's in a supremely stiff cell, that does not twist,why would a thin mirror sag?, artbianconi@blast.net
  • [ATM] If it's in a supremely stiff cell, that does not twist,why would a thin mirror sag?, Jeff Anderson-Lee
    • [ATM] If it's in a supremely stiff cell, that does not twist,why would a thin mirror sag?, Richard Klappal
      • [ATM] If it's in a supremely stiff cell, that does not twist, whywould a thin mirror sag?, Jeff Anderson-Lee
    • [ATM] If it's in a supremely stiff cell, that does not twist,why would a thin mirror sag?, artbianconi@blast.net
      • [ATM] If it's in a supremely stiff cell, that does not twist,why would a thin mirror sag?, Jeff Anderson-Lee
      • [ATM] Re: If it's in a supremely stiff cell, that does not twist,why would a thin mirror sag?, Steve Houlihan
  • [ATM] If it's in a supremely stiff cell, that does not twist,why would a thin mirror sag?, Bob May
  • <Possible follow-up(s)>
  • [ATM] If it's in a supremely stiff cell, that does not twist,why would a thin mirror sag?, Good, Donald
    • [ATM] If it's in a supremely stiff cell, that does not twist,why would a thin mirror sag?, artbianconi@blast.net
      • [ATM] If it's in a supremely stiff cell, that does not twist,why would a thin mirror sag?, Richard Klappal
      • [ATM] If it's in a supremely stiff cell, that does not twist, why would a thin mirror sag?, George Anderson
  • [ATM] If it's in a supremely stiff cell, that does not twist,why would a thin mirror sag?, Good, Donald
    • [ATM] If it's in a supremely stiff cell, that does not twist,why would a thin mirror sag?, artbianconi@blast.net
• [ATM] IGNORE... Internal list test, Ken Lowther
• [ATM] Interferometer Construction Details, Don
  • Message not available
    • [ATM] Interferometer Construction Details, Don
      • [ATM] Parting is such sweet sorrow NOT!, Don Clement
  • Message not available
    • [ATM] Interferometer Construction Details, Don
• [ATM] Ion Assisted Mirror Coating, Ray@J-Engineering.com
  • [ATM] Ion Assisted Mirror Coating, Jerry
• [ATM] literarture on ronchi testing, Jeff Anderson-Lee
  • [ATM] literarture on ronchi testing, Jim Girard
• [ATM] looking for, Ina Ron Lippard Renaissance Reproductions
  • [ATM] looking for, Michael Lindner
• [ATM] Machine polishing simulator, looking for help, James Lerch
  • [ATM] Machine polishing simulator, looking for help, Michael Lindner
  • [ATM] Re: [atm_free] Machine polishing simulator, looking for help, Woodchuck
  • [ATM] Machine polishing simulator, looking for help, Tom Stokes
  • <Possible follow-up(s)>
  • [ATM] Machine polishing simulator, looking for help, martin.cibulski@degussa.com
    • [ATM] Machine polishing simulator, looking for help, Woodchuck
      • [ATM] Machine polishing simulator, looking for help, Martin Cibulski
      • [ATM] Machine polishing simulator, looking for help, Scott Rychnovsky
      • [M-O-M] [ATM] Machine polishing simulator, looking for help, Woodchuck
      • [ATM] Machine polishing simulator, looking for help, James Lerch
      • [ATM] Machine polishing simulator, looking for help, Martin Cibulski
      • [ATM] Machine polishing simulator, looking for help, Michael Lindner
• [ATM] Mirror cell design - diagram wanted, Tom Krajci
• [ATM] Mirror cell snake oil?, tkrajci@san.osd.mil
• [ATM] Mirror cells - some professional literature and ideas foramateurs, Tom Krajci
  • [ATM] Mirror cells - some professional literature and ideas foramateurs, Michael Lindner
  • [ATM] Mirror cells - some professional literature and ideasforamateurs, Stuart Hutchins
  • <Possible follow-up(s)>
  • [ATM] Mirror cells - some professional literature and ideas foramateurs, Tom Krajci
• [ATM] mirror coating, Art
  • [ATM] mirror coating, Thomas
  • [ATM] mirror coating, Art
  • <Possible follow-up(s)>
  • FW: Re: [ATM] mirror coating, mlbrown@everstrive.com
  • [ATM] mirror coating, Art
    • [ATM] mirror coating, Richard Ozer
• [ATM] Mirror Coating Recommendations, Anyone?, Jay Kirkland
  • <Possible follow-up(s)>
  • [ATM] Mirror Coating Recommendations, Anyone?, Art
    • [ATM] Mirror Coating Recommendations, Anyone?, Bob May
  • FW: RE: [ATM] Mirror Coating Recommendations, Anyone?, mlbrown@everstrive.com
  • [ATM] Mirror Coating Recommendations, Anyone?, Gil Gagne
  • [ATM] Mirror Coating Recommendations, Anyone?, Michael Lindner
  • [ATM] Mirror Coating Recommendations, Anyone?, NGC704@aol.com
  • [ATM] Mirror Coating Recommendations, Anyone?, Mark Holm
    • [ATM] Mirror Coating Recommendations, Anyone?, Jim Girard
      • [ATM] Mirror Coating Recommendations, Anyone?, Tom Lakovic
  • [ATM] Mirror Coating Recommendations, Anyone?, Dan Croskrey
• [ATM] Mirror edge won't budge, Art
• [ATM] Mirror Regrind., Marco Miglionico
  • [ATM] Mirror Regrind., Jim Burrows
  • [ATM] Mirror Regrind., Bob May
  • <Possible follow-up(s)>
  • [ATM] Mirror Regrind., Hugues.Laroche@ses-astra.com
    • [ATM] Mirror Regrind., Scott Ewart
• [ATM] Mirror Support for EQ or Fork Mounted Scopes, Steve Houlihan
  • <Possible follow-up(s)>
  • [ATM] Mirror Support for EQ or Fork Mounted Scopes, Thomas A Simmons
• [ATM] My Glass is here., Thomas
• [ATM] NEW LIST--Old Names, New names, Russell Jocoy
  • [ATM] NEW LIST--Old Names, New names, Michael Lindner
  • [ATM] NEW LIST--Old Names, New names, Art
  • [ATM] NEW LIST--Old Names, New names, Bob May
    • [ATM] NEW LIST--Old Names, New names, Tom Moulton
      • [ATM] NEW LIST--Old Names, New names, Mike Warne
    • [ATM] NEW LIST--Old Names, New names, Ken Lowther
    • [ATM] NEW LIST--Old Names, New names, Thomas A. Moulton
      • [ATM] NEW LIST--Old Names, New names, Bob May
    • [ATM] NEW LIST--Old Names, New names, Tom Moulton
  • <Possible follow-up(s)>
  • [ATM] NEW LIST--Old Names, New names, Fisher, Nick
    • [ATM] NEW LIST--Old Names, New names, Jim Girard
      • [ATM] NEW LIST--Old Names, New names, Raphaël Guinamard
      • [ATM] NEW LIST--Old Names, New names, Guy Brandenburg
  • [ATM] NEW LIST--Old Names, New names, Chris Plicht
• [ATM] New? Idea for mirror support, Doug Williams
  • [ATM] New? Idea for mirror support, Ken Lowther
    • [ATM] New? Idea for mirror support, Doug Williams
      • [ATM] New? Idea for mirror support, Ken Lowther
      • [ATM] New? Idea for mirror support, Joe
      • [ATM] New? Idea for mirror support, Ken Lowther
  • [ATM] New? Idea for mirror support, Andy Saulietis
    • [ATM] New? Idea for mirror support, Steve Houlihan
  • <Possible follow-up(s)>
  • [ATM] New? Idea for mirror support, Gil Gagne
  • [ATM] New? Idea for mirror support, NGC704@aol.com
  • [ATM] New? Idea for mirror support, tkrajci@san.osd.mil
  • [ATM] New? Idea for mirror support, artbianconi@blast.net
• [ATM] Newly joined and bouncing, Ken Lowther
• [ATM] Note from Dave Harbour, Ron Gafron
• [ATM] off topic - disposing of this atm stuff, Jerry B. Hillman
• [ATM] Old ATM Archives, Michael Lindner
  • [ATM] Old ATM Archives, Rick Maillet
    • [ATM] Old ATM Archives, Michael Lindner
      • [ATM] Old ATM Archives, Ken Lowther
• [ATM] on/off topic?, luth-astro@earthlink.net
  • [ATM] on/off topic?, Ken Lowther
  • [ATM] on/off topic?, Art
  • [ATM] on/off topic?, Bob May
• [ATM] Optical Flat, polaraligned
• [ATM] OT plywood, Ina Ron Lippard Renaissance Reproductions
  • [ATM] OT plywood, George Anderson
    • [ATM] Second Thoughts on Mirror Support, Steve Houlihan
      • [ATM] Second Thoughts on Mirror Support, Don D'Egidio
      • [ATM] Second Thoughts on Mirror Support, Dale Eason
      • [ATM] Second Thoughts on Mirror Support, Don D'Egidio
      • [ATM] Second Thoughts on Mirror Support, Dale Eason
      • [ATM] Second Thoughts on Mirror Support, Don D'Egidio
      • [ATM] Foucault blind to astigmatism?, Bill Kelley
      • [ATM] Foucault blind to astigmatism?, Dale Eason
      • [ATM] Foucault blind to astigmatism?, Jim Burrows
      • [ATM] Foucault blind to astigmatism?, Vladimir Galogaza
      • [ATM] Foucault blind to astigmatism?, James Lerch
      • [ATM] Foucault blind to astigmatism?, Vladimir Galogaza
      • [ATM] Second Thoughts on Mirror Support, mbyorick
      • [ATM] Second Thoughts on Mirror Support, Stuart Hutchins
      • [ATM] Second Thoughts on Mirror Support, Stuart Hutchins
• [ATM] pitch channels, B. Bainbridge
• [ATM] Pitch channels, how deep?, Ken Hunter
• [ATM] plywood question, Andy Saulietis
  • <Possible follow-up(s)>
  • [ATM] plywood question, Aart Olsen
  • [ATM] plywood question, Stuart Hutchins
• [ATM] Primary Mirror Scrach, Peter Pissias
  • [ATM] Primary Mirror Scrach, Michael Lindner
  • [ATM] Primary Mirror Scrach, Art
    • [ATM] Primary Mirror Scrach, Peter Pissias
  • [ATM] Theories on what causes TDE, Guy Brandenburg
    • [ATM] Theories on what causes TDE, Ken Hunter
    • [ATM] Theories on what causes TDE, Vladimir Galogaza
      • [ATM] Theories on what causes TDE, Ken Hunter
      • [ATM] Theories on what causes TDE, Peter
    • [ATM] Theories on what causes TDE, Jerry
      • [ATM] Theories on what causes TDE, Bob May
      • [ATM] Theories on what causes TDE, Jerry
  • [ATM] Primary Mirror Scrach, Bob May
• [ATM] Pyrex vs Plate, Robert Turner
  • [ATM] Pyrex vs Plate, Bob May
  • [ATM] Pyrex vs Plate, Ken Lowther
• [ATM] Question on my lap for 8" F6, Scotto1234@aol.com
  • [ATM] Question on my lap for 8" F6, Jerry
• [ATM] Quirky idea, Royston_Jeremy@emc.com
  • [ATM] Quirky idea, Grey Coyote
  • <Possible follow-up(s)>
  • [ATM] Quirky idea, Tom Krajci
  • [ATM] Quirky idea, Thomas A Simmons
• [ATM] Quoting in list messages, Mark Holm
• [ATM] Re: [atm_free] Sleekfest 2004, Bob May
  • [ATM] Re: [atm_free] Sleekfest 2004, Ray@J-Engineering.com
    • [ATM] Re: [atm_free] Sleekfest 2004, Jerry
• [ATM] Re: ATM Digest, Vol 2, Issue 12, artbianconi@blast.net
• [ATM] Re: ATM Digest, Vol 2, Issue 15, artbianconi@blast.net
  • [ATM] Re: ATM Digest, Vol 2, Issue 15, Jerry
• [ATM] Re: ATM Digest, Vol 2, Issue 19, Mark Holm
• [ATM] RE: ATM Digest, Vol 2, Issue 22, Art
• [ATM] RE: ATM Digest, Vol 2, Issue 36, Orion105
  • [ATM] RE: ATM Digest, Vol 2, Issue 36, Richard Klappal
    • [ATM] RE: ATM Digest, Vol 2, Issue 36, Ken Lowther
    • [ATM] RE: ATM Digest, Vol 2, Issue 36, Guy Brandenburg
      • [ATM] Working with plate glass - the figure changes like the weather, Guy Brandenburg
      • [ATM] Working with plate glass - the figure changes like theweather, buck childers
      • [ATM] Working with plate glass - the figure changes like theweather, Mark Cowan
      • [ATM] RE: ATM Digest, Vol 2, Issue 36, David M. Bourgeois
      • [ATM] RE: ATM Digest, Vol 2, Issue 36, George Anderson
      • [ATM] RE: ATM Digest, Vol 2, Issue 36, Richard Klappal
  • <Possible follow-up(s)>
  • [ATM] RE: ATM Digest, Vol 2, Issue 36, Mark Holm
• [ATM] RE: ATM Grit Sequence for 8" Mirror, mdholm@telerama.com
• [ATM] RE: ATM Laser Pointer, Shankland, CDR-Paul
  • [ATM] RE: ATM Laser Pointer, Raphaël Guinamard
• [ATM] RE: ATM mirror cell design- testing, Russell Jocoy
  • <Possible follow-up(s)>
  • [ATM] RE: ATM mirror cell design- testing, Mutalib Abdallah
• [ATM] Re: ATMList Traffic, Shankland, CDR-Paul
  • [ATM] Re: ATMList Traffic, Ken Lowther
  • [ATM] Re: ATMList Traffic, Michael Lindner
  • <Possible follow-up(s)>
  • [ATM] Re: ATMList Traffic, David_A._Stevens%GM@gm.com
• [ATM] RE: Flex / Potato Chip / Astigmatism question, Tom Krajci
• [ATM] Re: future biprop oxidizers? \ Re: [AR] Monopropellantresearch, Thomas
• [ATM] Re: Mirror cells - some professional literature and ideas, Clive Milne
• [ATM] Re: Mirror cells - some professional literature and ideas foramateurs, Tom Krajci
• [ATM] Re: Mirror cells - some professional literature and ideasforamateurs, Steve Houlihan
• [ATM] re: mirror support, Ellen Mackenzie
• [ATM] RE: New 25" Box Coater, Russell Jocoy
  • [ATM] Quirky idea, Grey Coyote
    • [ATM] Quirky idea, George Anderson
      • [ATM] Quirky idea, Dale Eason
      • [ATM] Quirky idea, Richard Ozer
      • [ATM] Quirky idea, georgea@cam.org
      • [ATM] Quirky idea, Grey Coyote
      • [ATM] Quirky idea, Mark Graybill
      • [ATM] Quirky idea, Grey Coyote
      • [ATM] Quirky idea, Dale Eason
      • [ATM] Quirky idea, Vladimir Galogaza
      • [ATM] Quirky idea, Grey Coyote
      • [ATM] Quirky idea, Michael Lindner
      • [ATM] Quirky idea, Vladimir Galogaza
      • [ATM] Quirky idea, George Anderson
      • [ATM] Quirky idea, jroweapp@postoffice.swbell.net
      • [ATM] Quirky idea, jroweapp@postoffice.swbell.net
      • [ATM] Quirky idea, jroweapp@postoffice.swbell.net
• [ATM] RE: New list, Salt Shakers, Stereo Vision, Russell Jocoy
  • [ATM] Pitch Laps, buck childers
    • [ATM] Pitch Laps, Ken Lowther
    • [ATM] Pitch Laps, Mark Cowan
    • [ATM] Pitch Laps, Bob May
      • [ATM] Pitch Laps, buck childers
      • [ATM] Pitch Laps, Ken Lowther
• [ATM] RE: Orion Mirrors and Quality, Russell Jocoy
  • [ATM] RE: Orion Mirrors and Quality, Grey Coyote
• [ATM] Re: RTV Considered Harmful, Frank Henriquez
  • [ATM] Re: RTV Considered Harmful, Michael Lindner
  • <Possible follow-up(s)>
  • [ATM] Re: RTV Considered Harmful, Bruce Sayre
• [ATM] RE: Second Thoughts on Mirror Support, Tom Krajci
  • <Possible follow-up(s)>
  • [ATM] Re: Second Thoughts on Mirror Support, tkrajci@san.osd.mil
    • [ATM] Re: Second Thoughts on Mirror Support, Don D'Egidio
  • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
  • [ATM] Re: Second Thoughts on Mirror Support, Tom Krajci
    • [ATM] Re: Second Thoughts on Mirror Support, Don D'Egidio
  • [ATM] Re: Second Thoughts on Mirror Support, Tom Krajci
    • [ATM] Re: Second Thoughts on Mirror Support, Andy Saulietis
      • [ATM] Re: Second Thoughts on Mirror Support, Peter
      • [ATM] Re: Second Thoughts on Mirror Support, Don D'Egidio
      • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
      • [ATM] Re: Second Thoughts on Mirror Support, Doug Williams
      • [ATM] Re: Second Thoughts on Mirror Support, Jim Burrows
    • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
      • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
      • [ATM] Re: Second Thoughts on Mirror Support, Jean-Guy Moreau
      • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
      • [ATM] Re: Second Thoughts on Mirror Support, Michael Lindner
      • [ATM] e-mail addresses, Jerry B. Hillman
      • [ATM] e-mail addresses, Michael Lindner
      • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
      • [ATM] Re: Second Thoughts on Mirror Support, Peter
      • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
      • [ATM] Re: Second Thoughts on Mirror Support, Michael Lindner
      • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
  • [ATM] Re: Second Thoughts on Mirror Support, Mark Holm
    • [ATM] Re: Second Thoughts on Mirror Support, Michael Lindner
      • [ATM] Re: Second Thoughts on Mirror Support, Mark Holm
    • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
      • [ATM] Re: Second Thoughts on Mirror Support, Stuart Hutchins
      • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
      • [ATM] Re: Second Thoughts on Mirror Support, Stuart Hutchins
      • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
      • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
      • [ATM] Re: Second Thoughts on Mirror Support, George Anderson
      • [ATM] Re: Second Thoughts on Mirror Support, Dale Eason
      • [ATM] Re: Second Thoughts on Mirror Support, Don D'Egidio
      • [ATM] Re: Second Thoughts on Mirror Support, Don D'Egidio
      • [ATM] Re: Second Thoughts on Mirror Support, Stuart Hutchins
      • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
      • [ATM] Re: Second Thoughts on Mirror Support, Peter
      • [ATM] Re: Second Thoughts on Mirror Support, Don D'Egidio
      • [ATM] Re: Second Thoughts on Mirror Support, Peter
      • [ATM] Re: Second Thoughts on Mirror Support, Ken Hunter
      • [ATM] Re: Second Thoughts on Mirror Support, Jean-Guy Moreau
      • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
      • [ATM] Re: Second Thoughts on Mirror Support, Steve Houlihan
      • [ATM] Re: Second Thoughts on Mirror Support, Stuart Hutchins
      • [ATM] Re: Second Thoughts on Mirror Support, Aart Olsen
      • [ATM] Re: Second Thoughts on Mirror Support, Michael Lindner
      • [ATM] Re: Second Thoughts on Mirror Support, Stuart Hutchins
      • [ATM] Re: Second Thoughts on Mirror Support, Steve Houlihan
      • [ATM] Re: Second Thoughts on Mirror Support, Ken Hunter
      • [ATM] Re: Second Thoughts on Mirror Support, Steve Houlihan
      • [ATM] Re: Second Thoughts on Mirror Support, Ken Lowther
      • [ATM] Re: Second Thoughts on Mirror Support, gjnelson@absamail.co.za
      • [ATM] Re: Second Thoughts on Mirror Support, Charles Mitchard
      • [ATM] Re: Second Thoughts on Mirror Support, Stuart Hutchins
      • [ATM] Searching the archive., Lawrence D. Lopez
      • [ATM] Searching the archive., Lawrence D. Lopez
      • [ATM] Searching the archive., Michael Lindner
      • [ATM] Searching the archive., Ken Lowther
      • [ATM] Re: Second Thoughts on Mirror Support, Mark Holm
  • Fwd: Re: [ATM] Re: Second Thoughts on Mirror Support, Matthew L. Brown
  • [ATM] Re: Second Thoughts on Mirror Support, Tom Krajci
    • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
      • [ATM] Re: Second Thoughts on Mirror Support, Peter
  • [ATM] Re: Second Thoughts on Mirror Support, Good, Donald
    • [ATM] Re: Second Thoughts on Mirror Support, Stuart Hutchins
  • [ATM] Re: Second Thoughts on Mirror Support, Jarvis Krumbein
    • [ATM] Re: Second Thoughts on Mirror Support, Jeff Anderson-Lee
  • [ATM] Re: Second Thoughts on Mirror Support, Emery Greg
    • [ATM] Re: Second Thoughts on Mirror Support, B. Bainbridge
      • [ATM] Re: Second Thoughts on Mirror Support, Greg Emery
      • [ATM] Re: Second Thoughts on Mirror Support, Stuart Hutchins
      • [ATM] Re: Second Thoughts on Mirror Support, Mel Bartels
    • [ATM] Re: Second Thoughts on Mirror Support, Gary Seronik
• [ATM] Re: Second Thoughts on Mirror Support (Art Bianconi), tkrajci@san.osd.mil
• [ATM] RE: TDE, Russell Jocoy
• [ATM] Re: Warping plywood, nfnik-atmlist@yahoo.com
• [ATM] Re:New email address, Harry Kearns
• [ATM] Refractor performance, Lock,Tony [Dartmouth]
• [ATM] Refractor perscription, Thomas
  • [ATM] Refractor perscription, Richard F.L.R. Snashall
    • [ATM] Refractor perscription, Thomas
      • [ATM] Refractor perscription, Richard F.L.R. Snashall
      • [ATM] Refractor perscription, Thomas
      • [ATM] Refractor perscription, Richard F.L.R. Snashall
• [ATM] ronchi shots, c f
  • [ATM] ronchi shots, Bill Kelley
  • [ATM] ronchi shots, Dale Eason
  • [ATM] ronchi shots, Mark Cowan
  • <Possible follow-up(s)>
  • [ATM] ronchi shots, c f
• [ATM] Rough grinding 8" Mirror spreading the curve..., Satish K. Pagare
  • [ATM] Rough grinding 8" Mirror spreading the curve..., Bob May
  • <Possible follow-up(s)>
  • [ATM] Rough grinding 8" Mirror spreading the curve..., Hugues.Laroche@ses-astra.com
• [ATM] RTV, You Will Comply, Stuart Hutchins
  • [ATM] Re: RTV, You Will Comply, Jeff Anderson-Lee
    • [ATM] Re: RTV, You Will Comply, Stuart Hutchins
    • [ATM] Re: RTV, You Will Comply, Jeff Anderson-Lee
      • [ATM] Re: RTV, You Will Comply, Steve Houlihan
      • [ATM] Re: RTV, You Will Comply, Jeff Anderson-Lee
• [ATM] Schmidt Corrector Thickness, Alfredo Rainho Neves
  • [ATM] Schmidt Corrector Thickness, Bob May
    • [ATM] Schmidt Corrector Thickness, Dominic-Luc Webb
  • [ATM] Schmidt Corrector Thickness, Michael Lindner
  • <Possible follow-up(s)>
  • [ATM] Schmidt Corrector Thickness, Aplanatic@aol.com
    • [ATM] Schmidt Corrector Thickness, Bob May
• [ATM] Second Thoughts on Mirror Support, Mark Holm
  • [ATM] Second Thoughts on Mirror Support, Stuart Hutchins
    • [ATM] Second Thoughts on Mirror Support, Don D'Egidio
    • [ATM] Second Thoughts on Mirror Support, Jeff Anderson-Lee
    • [ATM] Second Thoughts on Mirror Support, Jeff Anderson-Lee
    • [ATM] Second Thoughts on Mirror Support, Mark Holm
      • [ATM] Second Thoughts on Mirror Support, Stuart Hutchins
      • [ATM] Second Thoughts on Mirror Support, Jeff Anderson-Lee
      • [ATM] Re: Second Thoughts on Mirror Support, Steve Houlihan
      • [ATM] Re: Second Thoughts on Mirror Support, Michael Lindner
      • [ATM] Re: Second Thoughts on Mirror Support, Steve Houlihan
      • [ATM] Re: Second Thoughts on Mirror Support, Michael Lindner
      • [ATM] Re: Second Thoughts on Mirror Support, Don D'Egidio
      • [ATM] Re: Second Thoughts on Mirror Support, Stuart Hutchins
      • [ATM] Re: Second Thoughts on Mirror Support, Mel Bartels
      • RTV Considered Harmful (was [ATM] Re: Second Thoughts on MirrorSupport), Michael Lindner
      • RTV Considered Harmful (was [ATM] Re: Second Thoughts on MirrorSupport), Mel Bartels
      • RTV Considered Harmful (was [ATM] Re: Second Thoughts onMirrorSupport), James Lerch
      • RTV Considered Harmful (was [ATM] Re: Second ThoughtsonMirrorSupport), Stuart Hutchins
• [ATM] server test ignore, Ken Lowther
• [ATM] shop tip, Ina Ron Lippard Renaissance Reproductions
  • [ATM] shop tip, Bob May
    • [ATM] shop tip, Ken Lowther
      • [ATM] OT: To Ken Lowther, N. Foldager
      • [ATM] shop tip, Bob May
  • [ATM] shop tip, Marco Miglionico
    • [ATM] shop tip, Bob May
      • [ATM] shop tip, Keith Taylor
      • [ATM] shop tip, Ellen Mackenzie
      • [ATM] shop tip, George Anderson
  • <Possible follow-up(s)>
  • [ATM] shop tip, c f
    • [ATM] shop tip, Ellen Mackenzie
• [ATM] Specs on Orion mirrors, Torquil MacCorkle, III
  • [ATM] Specs on Orion mirrors, Torquil MacCorkle, III
    • [ATM] Specs on Orion mirrors, Jerry B. Hillman
    • [ATM] Specs on Orion mirrors, Anthony Stillman
      • [ATM] Specs on Orion mirrors, Doug Williams
      • [ATM] Specs on Orion mirrors, Jack Schmidling
• [ATM] Stupid Fine Grinding Question, Peter
  • [ATM] Stupid Fine Grinding Question, Bob May
  • <Possible follow-up(s)>
  • [ATM] Stupid Fine Grinding Question, Bob May
• [ATM] test - ignore, Matt Considine
• [ATM] The S-Mirror, a New Fad?, Stuart Hutchins
  • [ATM] The S-Mirror, a New Fad?, Jim Miller
• [ATM] Thinking while parabolizing, Jonathan Bishop
  • [ATM] Thinking while parabolizing, Bob May
• [ATM] Thoughts about mirror cell design from a stubborn RTV-head, Bruce Sayre
  • [ATM] Thoughts about mirror cell design from a stubborn RTV-head, Jeff Anderson-Lee
    • [ATM] Thoughts about mirror cell design from a stubborn RTV-head, Bruce Sayre
      • [ATM] Thoughts about mirror cell design from a stubborn RTV-head, Jeff Anderson-Lee
• [ATM] Tough as Tile, Quik-Tubes, Torquil MacCorkle, III
  • [ATM] Tough as Tile, Quik-Tubes, Ken Lowther
  • [ATM] Tough as Tile, Quik-Tubes, Michael Lindner
  • [ATM] Tough as Tile, Quik-Tubes, Daniel Fundo
• [ATM] Truss Tube In Progress, Samuel DiRocco
  • [ATM] Truss Tube In Progress, Peter
• [ATM] Tubing for Trusses, Kurt Clement
  • [ATM] Tubing for Trusses, Stuart Hutchins
    • Message not available
      • [ATM] Tubing for Trusses, Stuart Hutchins
      • [ATM] Tubing for Trusses, Kurt Clement
    • [ATM] Tubing for Trusses, Jonathan Bishop
• [ATM] viewing in stereo - a bit off topic, but interesting anyway, Guy Brandenburg
  • [ATM] viewing in stereo - a bit off topic, but interesting anyway, Stephen C. Koehler
    • [ATM] viewing in stereo - a bit off topic, but interesting anyway, Bob May
    • [ATM] viewing in stereo - a bit off topic, but interesting anyway, George Anderson
      • [ATM] viewing in stereo - a bit off topic, but interesting anyway, Richard Klappal
    • [ATM] viewing in stereo - a bit off topic, but interesting anyway, Jerry
  • <Possible follow-up(s)>
  • [ATM] viewing in stereo - a bit off topic, but interesting anyway, tkrajci@san.osd.mil
• [ATM] Webcam Hartmann, Jim Burrows
  • [ATM] Webcam Hartmann, Richard Ozer
  • [ATM] Webcam Hartmann, Vladimir Galogaza
  • [ATM] Webcam Hartmann, Mauritz Andersson
    • [ATM] Webcam Hartmann, Vladimir Galogaza
      • [ATM] Webcam Hartmann, Jim Burrows
• [ATM] what causes coma?, lance clarke
  • [ATM] what causes coma?, Michael Lindner
    • [ATM] what causes coma?, Nils Olof Carlin
  • <Possible follow-up(s)>
  • [ATM] what causes coma?, Hugues.Laroche@ses-astra.com
  • [ATM] what causes coma?, Good, Donald
  • [ATM] what causes coma?, Mark Holm
    • [ATM] what causes coma?, Woodchuck
      • [ATM] what causes coma?, Mel Bartels
    • [ATM] what causes coma?, Stuart Hutchins
  • [ATM] what causes coma?, Hugues.Laroche@ses-astra.com
    • [ATM] what causes coma?, Mark Holm
    • [ATM] what causes coma?, Jim Burrows
  • Fw: [ATM] what causes coma?, Stuart Hutchins
  • [ATM] what causes coma?, Good, Donald
    • [ATM] what causes coma?, Stuart Hutchins
  • [ATM] what causes coma?, Mutalib Abdallah
    • [ATM] what causes coma?, Bob May
  • [ATM] what causes coma?, Good, Donald
    • [ATM] what causes coma?, Michael Peck
  • [ATM] what causes coma?, Good, Donald
    • [ATM] what causes coma?, Michael Peck
  • [ATM] what causes coma?, lance clarke
    • [ATM] what causes coma?, Jim Burrows
  • [ATM] what causes coma?, Bob May
• [ATM] Where is Tony Abrams?, Bill Kelley
• [ATM] Where to get it done?, HalbertMusik@aol.com
  • <Possible follow-up(s)>
  • [ATM] Where to get it done?, Hugues.Laroche@ses-astra.com
• [ATM] Whiffle Tree mirror edge support help needed, Lawrence Sayre
  • [ATM] Whiffle Tree mirror edge support help needed, Mark Suchting
    • [ATM] Whiffle Tree mirror edge support help needed, Raphaël Guinamard
      • [ATM] Whiffle Tree mirror edge support help needed, Lawrence Sayre
      • [ATM] Whiffle Tree mirror edge support help needed, Raphaël Guinamard
      • [ATM] Whiffle Tree mirror edge support help needed, Vladimir Galogaza
      • [ATM] Whiffle Tree mirror edge support help needed, Ken Hunter
      • [ATM] Whiffle Tree mirror edge support help needed, Raphaël Guinamard
      • [ATM] Whiffle Tree mirror edge support help needed, Michael Lindner
      • [ATM] Whiffle Tree mirror edge support help needed, Stuart Hutchins
      • [ATM] Whiffle Tree mirror edge support help needed, Ken Hunter
    • [ATM] Whiffle Tree mirror edge support help needed, Lawrence Sayre
  • <Possible follow-up(s)>
  • [ATM] Whiffle Tree mirror edge support help needed, Tom Krajci
    • [ATM] Whiffle Tree mirror edge support help needed, Ric Rokosz
• [ATM] whiffletree, Ken Hunter
• [ATM] Working up a TDE and semi-figuring, Russell Jocoy
• [ATM] Working with plate glass - the figure changes like the, Mark Holm
• [ATM] Zeiss E-type lens, Matheus Jatkoske Lazo
• ATM List: Please read!, Michael Lindner
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA, Mail System Internal Data
• REMINDER ON BEHALF OF THE LIST OWNER, simeon ivanov