Amateur Telescope Makers (ATM) Archive for FEB01 - by author
- Re: ATM PLOP Mirror Cell Results for a 24"
- From: "Frédéric Géa" <geaf@unionfinancieredefrance.fr>
- Re: ATM 20 inch mirror
- From: "Frédéric Géa" <geaf@unionfinancieredefrance.fr>
- ATM paramythioti telescope
- From: Nik Cain <nikcain@yahoo.co.uk>
- Re: ATM Light pollution filters
- From: "Albert Highe" <ahighe@ix.netcom.com>
- ATM Barco Lenses
- From: Alec Muffett <alecm@crypto.dircon.co.uk>
- ATM 16'' f/0.5
- From: "Alexander Urban" <alexander.urban@gmx.de>
- ATM Re: 16" f/0.5
- From: "Alexander Urban" <alexander.urban@gmx.de>
- ATM Refiguring soft, wet refractor objective pairs
- From: "Andrew Schott" <aschott@digital.net>
- ATM Need help with Telescope question
- From: "Andrew Wan" <awan@bwr.eastlink.ca>
- ATM Thanks for the help
- From: "Andrew Wan" <awan@bwr.eastlink.ca>
- ATM CCD Question
- From: "Andrew Wan" <awan@bwr.eastlink.ca>
- Re: ATM in a pickle
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Equatorial platforms
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Off topic question
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Equatorial platforms
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM New erecting mirror system
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Home made large, low-profile ball-bearings?
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Question: need comments on DK cass design
- Re: ATM Home made large, low-profile ball-bearings?
- From: "Arjan te Marvelde (ELN)" <Arjan.te.Marvelde@eln.ericsson.se>
- ATM Aluminum Mirrors
- From: "Art Teel" <artt@intergrafix.net>
- ATM ST-6 CCD
- From: Assaf Berwald <meshoamam@yahoo.com>
- ATM Astro Archive update
- From: Astro Archive Administrator <astro-archive@inside.net>
- Re: ATM Secondary Obstruction: A Real-Life Experience
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: Re:ATM Eye Surgery +
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM S&T Folded Refractor
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- ATM Re: Now the next step..........
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Edmund Mirrors
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Viruses harmless in digest
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Alternative Sources for 1/20 Wave Flats
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Refractors Of Unusual Sizes
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- RE: ATM Sticky dot
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Refiguring soft, wet refractor objective pairs
- From: Barry Keeney <barryk@chaoscon.com>
- ATM SBIG ST-6 ccd's
- From: Barry Keeney <barryk@chaoscon.com>
- ATM Mirror Boxes vs. Mirror Frames
- From: "Bell, Andrew" <AMB2@pge.com>
- ATM Tracking the ISS
- From: "Bell, Andrew" <AMB2@pge.com>
- ATM Thin Mirror First Lesson Learned
- From: "Bennett, Thomas D" <thomas.d.bennett@lmco.com>
- Re: ATM Boundary layer (was plate glass)
- From: Bill Byrd <web01@flash.net>
- Re: ATM accuracy in spherometer
- From: Bill Marriott <btk@pacbell.net>
- Re: ATM 2 Flat questions
- From: Bill Marriott <btk@pacbell.net>
- ATM Re: Cutting Zerodour pt 2
- From: Bill Marriott <btk@pacbell.net>
- Re: ATM Looking for clear class with anti-reflective coating
- From: Bill Marriott <btk@pacbell.net>
- ATM Large Polisher/Grinder Available
- From: Bill Marriott <btk@pacbell.net>
- Re: ATM scope.exe and control
- From: "Bill Prewitt" <bprewitt@neo.rr.com>
- Re: ATM Kydex
- From: "Bill Prewitt" <bprewitt@neo.rr.com>
- Re: ATM PCB cad?
- From: "Bill Prewitt" <bprewitt@neo.rr.com>
- Re: ATM Computer Alt/Az control - clarification
- From: "Bill Prewitt" <bprewitt@neo.rr.com>
- Re: ATM Any recommended mirror aluminisers in Oz?....
- From: "Bill Thornley" <bill_thornley@hotmail.com>
- Re: ATM Any recommended mirror aluminisers in Oz?....
- From: "Bill Thornley" <bill_thornley@hotmail.com>
- Re: ATM Inverse Ronchi Screens
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Pyrex for a lens?
- From: "Bob May" <bobmay@nethere.com>
- ATM Re: [QCUIAG] Hydrogen Alpha
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Roughing the 12.5
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Ronchi Screens: a new twist?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Re: HELP!
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM : Drawbacks to using sand for grinding?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM CB245 First Light Success - thanks for the help
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM What size lap?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Dall-Kirkham update
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM CB245
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Dall-Kirkham update
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Anastigmatic and coma correction in unobstructed reflectors
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Dall-Kirkham update
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM - Dental Stone Tools and Lap Foundations
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Elevator bolts used in mirror cells
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Inexpencive equipment for moving things with motors
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM - Dental Stone Tools and Lap Foundations
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM S&T Folded Refractor
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Anastigmatic and coma correction in unobstructed reflectors
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Re: Anastigmatic and coma correction in unobstructed reflectors
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM S&T Folded Refractor
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM S&T Folded Refractor
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM The Sacred Archives ..oppinion
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM G-sum program: That doesn't work
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM S&T Folded Refractor
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM The Sacred Archives ..oppinion
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Finished 80 grit I think?....
- From: "Bob May" <bobmay@nethere.com>
- Re: Was "RE: ATM Finished 80 grit I think?...." Now the next step..........
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Oscillating Peltier Supply (CB245)
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Wedge in a DK secondary
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Finished 80 grit I think?....
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Html
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Oscillating Peltier Supply (CB245)
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Wedge in a DK secondary
- From: "Bob May" <bobmay@nethere.com>
- Re: Was "RE: ATM Finished 80 grit I think?...." Now the next step..........
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Home made large, low-profile ball-bearings?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Adding an Autoguider to an Equatorial Platform (and thanks)
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Filter bumping into light path
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM FW: [RASCALS] Square Optics
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Finished 80 grit I think?....
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM 20 inch mirror
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Alternative Sources for 1/20 Wave Flats
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Finished 80 grit I think?....
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Home made large, low-profile ball-bearings?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Mirror Test & Questions
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM 20 inch mirror
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM accuracy in spherometer
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Finished 80 grit I think?....
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Finished 80 grit I think?....
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Refractors Of Unusual Sizes
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Refractors Of Unusual Sizes
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM making my focal length longer...
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM making my focal length longer...
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Pollishing
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Spectrohelioscope
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM lead counter weight casting
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM PCB software
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM PCB software
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM RE: Sodium Lighting and Fringes from Ground Surfaces
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM What size to cut for my next project...
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM The Clarks and their Refractors
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM accuracy in spherometer
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Looking for clear class with anti-reflective coating
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM 16" f/0.5
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM 16" spherical long-focus mirrors
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM 16" spherical long-focus mirrors
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM fiber optics cable?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Large Polisher/Grinder Available
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Slumping question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM trepaning tool speed
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Zynolyte, Wrinkle finish
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM fiber optics cable?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM silvering update
- From: "Bob May" <bobmay@nethere.com>
- Re: Re:ATM fiber optics cable?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM RE: PVC Piping
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Electric focusser
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM How to Grind Identical Mirrors?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM paramythioti telescope
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM RE: PVC Piping
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM How to Grind Identical Mirrors?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Boundary layer (was plate glass)
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Date: Tue, 27 Feb 2001 15:40:22 -0500
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Worms feeding Worms
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Date: Tue, 27 Feb 2001 15:40:22 -0500
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM another, unrelated question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM How to Grind Identical Mirrors?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM - Dental Stone Tools and Lap Foundations
- From: Brad Davy <bdavy@fred.net>
- Re: ATM PLASTER TILE TOOLS
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Ronchi Screens: a new twist?
- From: "Brian M. Parks" <bmparks@facstaff.wisc.edu>
- Re: ATM The Sacred Archives ..oppinion
- From: "Brian M. Parks" <bmparks@facstaff.wisc.edu>
- ATM a suggestion
- From: "Brian M. Parks" <bmparks@facstaff.wisc.edu>
- Re: ATM Viruses harmless in digest
- From: "Brian M. Parks" <bmparks@facstaff.wisc.edu>
- Re: ATM Here you have, ;o)
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Viruses harmless in digest
- From: Brian Nestel <blast@aloha.net>
- Re: ATM CCD Question
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Computer Alt/Az control - clarification
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Computer Alt/Az control - clarification
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Computer Alt/Az control - clarification
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Mt. Piños
- From: Brian Nestel <blast@aloha.net>
- ATM Mirror Test & Questions
- From: brian_webb2@non.agilent.com
- ATM Preliminary 22" reflector design
- From: "Bruce Sayre" <sayre@foothill.net>
- ATM Final 22" reflector design
- From: "Bruce Sayre" <sayre@foothill.net>
- RE: ATM Final 22" reflector design
- From: "Bruce Sayre" <sayre@foothill.net>
- Re: ATM Boundary layer (was plate glass)
- From: "Bryan Greer" <bgreer@fpi-protostar.com>
- ATM Mirror box clearance
- From: "ca.harris" <ca.harris@ntlworld.com>
- ATM LaserGrid Source
- From: Charles Broward <broward@afn.org>
- ATM glueing mirrors
- From: CHARLES GARCIA <starryn@usa.net>
- ATM grits
- From: Charles Mitchard <mitchard@ultra.net.au>
- ATM re- the archives, and binocular viewers
- From: Charles Mitchard <mitchard@ultra.net.au>
- ATM First Light
- From: Chris Mansfield <atmvega@yahoo.com>
- Re: ATM SiO Overcoating
- From: Chris Nogal <cnogal@home.com>
- ATM Electric focusser
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- Re: ATM Alternative Sources for 1/20 Wave Flats
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Equatorial platforms
- From: Chuck Shaw <cshaw@ghg.net>
- Re: ATM Equatorial platforms
- From: Chuck Shaw <cshaw@ghg.net>
- ATM accuracy in spherometer
- From: "Chuck Taylor" <chucktaylor3@integrityol.com>
- ATM Boundary layer (was plate glass)
- From: "Chuck Taylor" <chucktaylor3@qwest.net>
- ATM Rebuilding a DS16
- From: Clive Milne <milnecd@yahoo.com>
- ATM Rebuilding a DS 16
- From: Clive Milne <milnecd@yahoo.com>
- ATM Re- Bruce's 22" design
- From: Clive Milne <milnecd@yahoo.com>
- ATM Reducing truss pole weight (Was,- Bruce's 22" design)
- From: Clive Milne <milnecd@yahoo.com>
- ATM Forces & Truss geometry
- From: Clive Milne <milnecd@yahoo.com>
- ATM 16" f0.5 Spherical mirror
- From: Clive Milne <milnecd@yahoo.com>
- ATM 20" bino' update
- From: Clive Milne <milnecd@yahoo.com>
- ATM European Optical Coatings
- From: Clive Milne <milnecd@yahoo.com>
- ATM Platform motors
- From: Consultants Refra-Tech <rebetez@loginnovation.com>
- ATM Re: Pitted mirror coating
- From: Consultants Refra-Tech <rebetez@loginnovation.com>
- ATM Sodium lighting
- From: Consultants Refra-Tech <rebetez@loginnovation.com>
- ATM W-stroke for a thin mirror
- From: Consultants Refra-Tech <rebetez@loginnovation.com>
- ATM Equatorial platforms
- From: Curt Wittenberg <curtw@scripps.edu>
- ATM Here you have,;o) <---" Warning the title of this is a virus"
- From: "D. Ray East" <dr.east@usa.net>
- ATM Warning !!! VIRUS "A Virtual Card for You". "An Internet Flower For You"
- From: "D. Ray East" <dr.east@usa.net>
- Re: ATM Hydraulic cement, was Dental Stone Tools
- From: "Dale Campbell" <campbeld@abs-lcms.com>
- ATM Elevator bolts used in mirror cells
- From: "Dale Campbell" <campbeld@abs-lcms.com>
- ATM First Light - First Scope
- From: "Dan Rosenberg" <dan@rosenberg2000.com>
- ATM Newby question
- From: "Daniel Assmann" <d.assmann@planet.nl>
- ATM : Drawbacks to using sand for grinding?
- From: "Daniel Assmann" <d.assmann@planet.nl>
- ATM metal mirror
- From: "Daniel Assmann" <d.assmann@planet.nl>
- Re: ATM What size lap?
- From: Daniel Fundo <fundo@bellsouth.net>
- ATM OT - 3 Bedroom House???
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Date: Tue, 13 Feb 2001 11:05:34 -0500
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM New erecting mirror system
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Viruses harmless in digest
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM paramythioti telescope
- From: Daniel Fundo <fundo@bellsouth.net>
- ATM Diagonal size, distances from main mirror to final focus
- From: Daniel Kahraman <ishtar66@primus.ca>
- ATM Kydex
- From: Daniel Kahraman <ishtar66@primus.ca>
- Re: ATM Sodium lighting
- From: Daniel Kahraman <ishtar66@primus.ca>
- Re: ATM Equatorial platforms
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM Plate glass for Oz?
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM 12" mirror blank
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM Re: HELP!: Al and HCl
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM Appleply
- From: Dave Sopchak <dsopchak@mac.com>
- ATM Plate mirrors
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM Re: Plate mirrors,
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM Re: Plate Vs Pyrex
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM Re: Plate mirrors,
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM changes at Edmund Scientific
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM In Defense of Plate Glass
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM: Glueing Mirrors
- From: Dave Sopchak <dsopchak@mac.com>
- ATM 12" mirror blank
- From: "Dave Stevens" <dstevens@standardchange.com>
- ATM I cant receive mail
- From: "Dave Stevens" <dstevens@standardchange.com>
- ATM PLASTER TILE TOOLS
- From: "Dave Stevens" <dstevens@standardchange.com>
- ATM Date: Tue, 13 Feb 2001 11:05:34 -0500
- From: "Dave Stevens" <dstevens@standardchange.com>
- ATM Ronchi screens
- From: "Dave Stevens" <dstevens@standardchange.com>
- ATM Material for flats
- From: "Dave Stevens" <dstevens@standardchange.com>
- ATM Solar Scope
- From: "Dave Stevens" <dstevens@standardchange.com>
- FW: ATM Zonal Problems
- From: "David Schuh" <dschuh@attglobal.net>
- FW: ATM Zonal Problems
- From: "David Schuh" <dschuh@attglobal.net>
- ATM Html
- From: "David Schuh" <dschuh@attglobal.net>
- ATM Remedial Figuring
- From: "David Schuh" <dschuh@attglobal.net>
- ATM Remedial Figuring
- From: "David Schuh" <dschuh@attglobal.net>
- Re: ATM Re: HELP!
- From: David Smith <areopagus125@yahoo.com>
- Re: ATM 12" mirror blank
- From: David Smith <areopagus125@yahoo.com>
- Re: ATM Need help with Telescope question
- From: David Smith <areopagus125@yahoo.com>
- Re: ATM Date: Tue, 13 Feb 2001 11:05:34 -0500
- From: David Smith <areopagus125@yahoo.com>
- Re: ATM Re: Kydex
- From: David Smith <areopagus125@yahoo.com>
- Re: ATM New erecting mirror system
- From: David Smith <areopagus125@yahoo.com>
- Re: ATM New erecting mirror system
- From: David Smith <areopagus125@yahoo.com>
- Re: ATM New erecting mirror system
- From: David Smith <areopagus125@yahoo.com>
- Re: ATM making my focal length longer...
- From: David Smith <areopagus125@yahoo.com>
- Re: ATM making my focal length longer...
- From: David Smith <areopagus125@yahoo.com>
- Re: ATM SiO Overcoating
- From: David Smith <areopagus125@yahoo.com>
- Re: ATM: Glueing Mirrors
- From: David Smith <areopagus125@yahoo.com>
- ATM Polishing update on my 1st mirror.
- From: "Day, Jack" <jday@clinitech.net>
- RE: ATM Re: HELP!
- From: "Day, Jack" <jday@clinitech.net>
- ATM What size to cut for my next project...
- From: "Day, Jack" <jday@clinitech.net>
- :ATM at the Grand Canyon Star Party
- From: Dean Ketelsen <ketelsen@as.arizona.edu>
- Re: ATM Sticky dot
- From: "DeBusk" <talkalot@intplsrv.net>
- Re: ATM accuracy in spherometer
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Alternative Sources for 1/20 Wave Flats
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM How to Grind Identical Mirrors?
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM How to Grind Identical Mirrors?
- From: Dennis Rech <dennisrech@home.com>
- ATM Don't open AnnaKournikova.jpg it's a virus!!!
- From: "Dennis Sakva" <findep3@gc.dnepr.energy.gov.ua>
- ATM Slightly off topic
- From: Derek Maskell <skyman@globalnet.co.uk>
- ATM Re Dance of the Planets
- From: Derek Maskell <skyman@globalnet.co.uk>
- ATM trepaning tool speed
- From: "designsdavis" <designsdavis@home.com>
- ATM was grit monger
- From: "designsdavis" <designsdavis@home.com>
- ATM waineo machine
- From: "designsdavis" <designsdavis@home.com>
- Re: ATM Off topic question
- Re: ATM a quest for balance
- Re: ATM Rebuilding a DS16
- Re: ATM Re: Plywood Ball Bearings
- Re: ATM Applied Optics 1974 articles
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM another idea
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Ronchi screens and SASE
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM focal length
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM grits
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- re: ATM another idea
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Re: HELP!: Al and HCl
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM focal lenght
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Off topic question
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Newby question
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Off topic question
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Barnesite - radioactivity
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Star Testing
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM hogging a cored F/5 to F/4 - Suicide?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Barnesite - radioactivity
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Oscillating Peltier Supply (CB245)
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM virus hacker jailed already
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Alternative Sources for 1/20 Wave Flats
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- RE: ATM Alternative Sources for 1/20 Wave Flats
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- RE: ATM Alternative Sources for 1/20 Wave Flats
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Alternative Sources for 1/20 Wave Flats
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM 2 Flat questions
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Worms will feed worms
- From: "Don Clement" <clement@san.rr.com>
- ATM Moglice
- From: don clement <donald_clement@yahoo.com>
- Re: ATM Off-Topic Posts + Archives
- From: don clement <donald_clement@yahoo.com>
- Re: ATM Home made large, low-profile ball-bearings?
- From: don clement <donald_clement@yahoo.com>
- ATM Activities in/around San Jose
- From: Don Halter <dhalter@ghg.net>
- ATM Ronchi screens
- From: Donald Nuckols <donnux@earthlink.net>
- ATM More info on my Ronchi screens
- From: Donald Nuckols <donnux@earthlink.net>
- ATM Ronchi screens and SASE
- From: Donald Nuckols <donnux@earthlink.net>
- Re: ATM The Sacred Archives ..oppinion
- From: Donald Nuckols <donnux@earthlink.net>
- ATM Re: Boundary layer (was plate glass)
- From: Doug & Mikki Hudgins <hudginsclan@mindspring.com>
- RE: ATM tripod mounting of Cannon IS Bino's
- From: Doug Tanaka <dtanaka@seanet.com>
- RE: ATM Mirror Boxes vs. Mirror Frames
- From: Doug Tanaka <dtanaka@seanet.com>
- RE: ATM The Sacred Archives ..oppinion
- From: Doug Tanaka <dtanaka@seanet.com>
- RE: ATM Poured tool release agents? Arrggh...
- From: Doug Tanaka <dtanaka@seanet.com>
- ATM Zonal Problems
- From: "Duncan Radbourne" <duncan.radbourne@tesco.net>
- ATM Pollishing
- From: "Duncan Radbourne" <duncan.radbourne@tesco.net>
- re: ATM another idea
- From: "Dunk B." <dunk@mad.scientist.com>
- Re: ATM The Sacred Archives ..oppinion
- From: "Dunk B." <dunk@mad.scientist.com>
- ATM Missing Digests
- From: "Dunk B." <dunk@mad.scientist.com>
- Re: ATM Ronchi Screens: a new twist?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Gold Flats
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Star Testing
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Dob mount questions
- From: "Ed Erbeck Jr." <ed@crazyedoptical.com>
- Re: ATM Mirror Boxes vs. Mirror Frames
- From: Ed Taychert <elt@irony.com>
- Re: ATM Appleply
- From: Ed Taychert <elt@irony.com>
- ATM Re: Grinding stand
- From: Edmund Stevens <ehs@teleport.com>
- Re: ATM Sodium lighting
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- ATM Central hole or turned edge ?
- From: "Francis Milsom" <fmilsom@lineone.net>
- Re: ATM Microstepping with Real-Time Interrupts
- From: Frank Henriquez <frank@ucla.edu>
- Re: ATM PCB cad?
- From: Frank Henriquez <frank@ucla.edu>
- ATM Re: Plate mirrors
- From: Frank Henriquez <frank@ucla.edu>
- Re: ATM Hydraulic cement, was Dental Stone Tools
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM e-mail addresses
- From: "Frank Ward" <thewards@mindspring.com>
- ATM DK_Cass was testing secondary
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Shief
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM 22"
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM focal length
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Re: 10 inch f/5.5
- From: "Frank Ward" <thewards@mindspring.com>
- Re: Re:ATM Refiguring soft,wet objective pairs
- From: "Frank Ward" <thewards@mindspring.com>
- Re: Re:ATM DK figuring Question
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Mirror Boxes vs. Mirror Frames
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Newby question
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Anastigmatic Schiefspiefler
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM cass-collamination and star test
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Equatorial platforms
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Dall-Kirkham update
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM The Sacred Archives ..oppinion
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM The Sacred Archives ..oppinion
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Finished 80 grit I think?....
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Date: Tue, 13 Feb 2001 11:05:34 -0500
- From: "Frank Ward" <thewards@mindspring.com>
- ATM mistakes
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM polishing-help
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Viruses harmless in digest
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Finished 80 grit I think?....
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Remedial Figuring
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM roughing the 12.5
- From: "Frank Ward" <thewards@mindspring.com>
- ATM mirror correction
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Alternative Sources for 1/20 Wave Flats
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Home made large, low-profile ball-bearings?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM CCD Question
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM making my focal length longer...
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM making my focal length longer...
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Pollishing
- From: "Frank Ward" <thewards@mindspring.com>
- ATM cutting zerodure
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Re: Plate Vs Pyrex
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM fiber optics cable?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM 16" spherical long-focus mirrors
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Sky Eye 6" Reflector
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM In Defense of Plate Glass
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Boundary layer (was plate glass)
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM paramythioti telescope
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM astimatism in 20 inch scope
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Sticky dot
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM A little challenge. Thanks.
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Barnesite - radioactivity
- From: Gareth James Martin <g.j.martin@durham.ac.uk>
- ATM:PLEASE READ THIS!
- From: Gareth James Martin <g.j.martin@durham.ac.uk>
- Re: ATM S&T Folded Refractor
- From: Gary Seronik <gseronik@netway.com>
- Re: ATM ST Folded Refractor
- From: Gary Seronik <gseronik@netway.com>
- Re: ATM ST Folded Refractor
- From: Gary Seronik <gseronik@netway.com>
- Re: ATM Alternative Sources for 1/20 Wave Flats
- From: Gary Seronik <gseronik@netway.com>
- Re: ATM Alternative Sources for 1/20 Wave Flats
- From: Gary Seronik <gseronik@netway.com>
- RE: ATM In Defense of Plate Glass
- From: Gary Seronik <gseronik@netway.com>
- Re: ATM Boundary layer (was plate glass)
- From: Gary Seronik <gseronik@netway.com>
- ATM test
- From: Gary Wolanski <gary_wolanski@telus.net>
- ATM test
- From: Gary Wolanski <gary_wolanski@telus.net>
- Re: ATM - Dental Stone Tools and Lap Foundations
- From: George Anderson <georgea@CAM.ORG>
- Re: ATM The Sacred Archives ..oppinion
- From: George Anderson <georgea@CAM.ORG>
- Re: ATM Sticky dot
- From: George Anderson <georgea@CAM.ORG>
- Re: ATM The coninuing saga...
- From: George Anderson <georgea@CAM.ORG>
- Re: ATM Barnesite - radioactivity
- From: Glen Youman <gleny@starstream.net>
- ATM Appleply
- From: "Glenn Ward" <gward1@home.com>
- Re: ATM Final 22" reflector design
- From: "Greg Babcock" <gregb@iccom.com>
- ATM lens design
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM alaska question
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM 16" spherical long-focus mirrors
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM 16" spherical long-focus mirrors
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Sticky dot
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Artifact or Salvage - Astro-Compass MKII
- RE: ATM Mounting an 80mmST as a finder
- From: "Hans Winkelaar" <hans.winkelaar@12move.nl>
- ATM RE: PVC Piping
- From: "Hans Winkelaar" <hans.winkelaar@12move.nl>
- Re: ATM 22"
- From: "Harold" <adams@rmci.net>
- Re: ATM S&T Folded Refractor
- From: "Harold" <adams@rmci.net>
- Re: ATM ST Folded Refractor
- From: Harold Suiter <suiterhr@digitalexp.com>
- Re: ATM ST Folded Refractor
- From: Harold Suiter <suiterhr@digitalexp.com>
- Re: ATM polishing-help
- From: "Helen & Gus O'Donnell" <kozmickid@knology.net>
- ATM Question: need comments on DK cass design
- From: "Herbert Gerald Kasler" <h.kasler@worldnet.att.net>
- ATM Question: Parcorr corrector on a DK scope
- From: "Herbert Gerald Kasler" <h.kasler@worldnet.att.net>
- ATM two-diagonal newtonian instead of DK
- From: "Herbert Gerald Kasler" <h.kasler@worldnet.att.net>
- ATM another, unrelated question
- From: "Herbert Gerald Kasler" <h.kasler@worldnet.att.net>
- Re: ATM another, unrelated question
- From: "Herbert Gerald Kasler" <h.kasler@worldnet.att.net>
- Re: ATM Equatorial platforms
- From: "Howard Banich" <hbanich@teleport.com>
- ATM Barnesite - radioactivity
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- ATM Barnesite/CeO radiation
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- Re: ATM Design of Apochromatic Doublet
- From: Hugues_Laroche@ses-astra.com
- No Subject
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Tracking the Space Station?
- From: Hugues_Laroche@ses-astra.com
- ATM Minimalist dobs and the "sling"
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Re: IT'S 88 ALRIGHT.] + another question
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Finished 80 grit I think?....
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Finished 80 grit I think?....
- From: Hugues_Laroche@ses-astra.com
- ATM Home made large, low-profile ball-bearings?
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Home made large, low-profile ball-bearings?
- From: Hugues_Laroche@ses-astra.com
- RE: ATM Finished 80 grit I think?....
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Poured tool release agents? Arrggh...
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Poured tool release agents? Arrggh...
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Re- Bruce's 22" design
- From: Hugues_Laroche@ses-astra.com
- ATM another idea
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM re: another idea
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM a quest for balance
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM neat stuff!
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM doing the work
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM in respect of books
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM server problems
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM still here
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM more bearings you can make
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM I'm back
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- ATM more ideas
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- ATM grit monger
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- ATM X-treme mirrors
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
- Re: ATM another, unrelated question
- From: Jack Reynolds <rods@netdirect.net>
- Re: ATM another idea
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Data dump site, was ATM Inverse Ronchi Screens
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM amateur activities in the Bay Area this week
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM focal lenght
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM Hydraulic cement, was Dental Stone Tools
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM - Dental Stone Tools and Lap Foundations
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM "Houston, we have glass blanks!!!"
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Trepanning Grit, Was Re: ATM The Sacred Archives ..oppinion
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM glass
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM lead counter weight casting
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- ATM How to Grind Identical Mirrors?
- From: "James Lerch" <jlerch1@tampabay.rr.com>
- Re: ATM lead counter weight casting
- From: "James O'Malley" <omalleyj@eclipse.net>
- Re: ATM What size lap?
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Remedial Figuring
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM 16" spherical long-focus mirrors
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Question re: Interpreting Tex Results
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM RE: PVC Piping
- From: Jan Bentz <jbentz@inreach.com>
- Re: ATM Equatorial platforms
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM PLOP Mirror Cell Results for a 24"
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- ATM first (day)light
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- ATM first light 20"
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- ATM 20 inch mirror
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- Re: ATM 20 inch mirror
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- Re: ATM 20 inch mirror
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- Re: ATM 20 inch mirror
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- Re: ATM Boundary layer (was plate glass)
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- ATM 20 inch article
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- ATM astimatism in 20 inch scope
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- Re: ATM astimatism in 20 inch scope
- From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
- ATM Re: atm-digest V1 #2485, "Magnin mirrors", was "another, unrelated question?
- From: Jarvis Krumbein <jkoptic@juno.com>
- Re: ATM annealing
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- Re: ATM 22"
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM Kydex
- From: "Jeff Baldwin" <bald@gotnet.net>
- ATM Re: atm-digest V1 #2464
- From: Jeff Morgan <jeffmorgan@mindspring.com>
- Re: ATM Re: IT'S 88 ALRIGHT.
- From: Jeremy Batterson <jdbaterson@usa.net>
- Re: ATM Re: IT'S 88 ALRIGHT.]
- From: Jeremy Batterson <jdbaterson@usa.net>
- ATM Off-Topic Posts + Archives
- From: Jeremy Batterson <jdbaterson@usa.net>
- ATM - Dental Stone Tools and Lap Foundations
- From: Jeremy Batterson <jdbaterson@usa.net>
- Re: ATM - Dental Stone Tools and Lap Foundations
- From: Jeremy Batterson <jdbaterson@usa.net>
- Re: ATM The Sacred Archives ..oppinion
- From: Jeremy Batterson <jdbaterson@usa.net>
- Re: ATM The Sacred Archives ..oppinion
- From: Jeremy Batterson <jdbaterson@usa.net>
- Re: ATM The Sacred Archives ..oppinion
- From: Jeremy Batterson <jdbaterson@usa.net>
- Re: ATM Light pollution filters
- From: Jeremy Batterson <jdbaterson@usa.net>
- Re: ATM another, unrelated question
- From: Jeremy Batterson <jdbaterson@usa.net>
- Re: ATM another idea
- From: jldove@home.com (Jerry)
- Re: ATM glass
- From: jldove@home.com (Jerry)
- Re: ATM What size to cut for my next project...
- From: jldove@home.com (Jerry)
- ATM Clark and his type of lenses
- From: "Jim" <lockin@gte.net>
- ATM Re: Dance of the Planets
- From: "Jim and Sue Sapp" <jsstars@worldnet.att.net>
- ATM Which tool works the best?
- From: Jim Hulliberger <musicman@tucker-usa.com>
- Re: ATM Which tool works the best?
- From: Jim Hulliberger <musicman@tucker-usa.com>
- ATM STK site
- From: Jimmy La Fountain <lafountainj@earthlink.net>
- ATM STK web site
- From: Jimmy La Fountain <lafountainj@earthlink.net>
- Re: Mobsby Null Test, was Re: ATM YARGQ
- ATM Equatorial platforms
- From: Joe Curran <jcurran@asymtek.com>
- ATM Date: Fri, 23 Feb 2001 16:54:42 -0500
- From: "Joe Iannandrea" <joei@canadiangasket.com>
- ATM Re:
- From: "Joe Iannandrea" <joei@canadiangasket.com>
- ATM Re: PVC Piping
- From: "Joe Iannandrea" <joei@canadiangasket.com>
- ATM Date: Tue, 27 Feb 2001 15:40:22 -0500
- From: "Joe Iannandrea" <joei@canadiangasket.com>
- ATM Slumpers & Fuseers {sp?}
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Archives
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM The Sacred Archives ..oppinion
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM Web page editor needed
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM 16" spherical long-focus mirrors
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM focal length
- From: "john" <jp@premier1.net>
- ATM focal lenght
- From: "john" <jp@premier1.net>
- ATM help-polishing
- From: "john" <jp@premier1.net>
- ATM polishing-help
- From: "john" <jp@premier1.net>
- Re: ATM Equatorial platforms
- From: John.D.Gallagher@Hitchcock.ORG (John D. Gallagher)
- Re: ATM CB245 First Light Success - thanks for the help
- From: John Hutto <jdhutto@yahoo.com>
- ATM Finished 80 grit I think?....
- From: "John Murray" <onslow@austarnet.com.au>
- RE: ATM Finished 80 grit I think?....
- From: "John Murray" <onslow@austarnet.com.au>
- RE: ATM Finished 80 grit I think?....
- From: "John Murray" <onslow@austarnet.com.au>
- Was "RE: ATM Finished 80 grit I think?...." Now the next step..........
- From: "John Murray" <onslow@austarnet.com.au>
- RE: Was "RE: ATM Finished 80 grit I think?...." Now the next step..........
- From: "John Murray" <onslow@austarnet.com.au>
- RE: ATM Finished 80 grit I think?....
- From: "John Murray" <onslow@austarnet.com.au>
- RE: ATM Finished 80 grit I think?....
- From: "John Murray" <onslow@austarnet.com.au>
- RE: ATM Finished 80 grit I think?....
- From: "John Murray" <onslow@austarnet.com.au>
- RE: ATM Finished 80 grit I think?....
- From: "John Murray" <onslow@austarnet.com.au>
- RE: ATM Finished 80 grit I think?....
- From: "John Murray" <onslow@austarnet.com.au>
- RE: ATM Finished 80 grit I think?....
- From: "John Murray" <onslow@austarnet.com.au>
- ATM Any recommended mirror aluminisers in Oz?....
- From: "John Murray" <onslow@austarnet.com.au>
- RE: ATM Finished 80 grit I think?....
- From: "John Murray" <onslow@austarnet.com.au>
- RE: ATM Any recommended mirror aluminizers in Oz?....
- From: "John Murray" <onslow@austarnet.com.au>
- ATM Tracking the Space Station?
- From: "John Sherman" <shermj@netzero.net>
- Re: ATM 22"
- From: "John Sherman" <shermj@netzero.net>
- Re: ATM Forces & Truss geometry
- From: "John Sherman" <shermj@netzero.net>
- ATM Polishing Bare Aluminum
- From: "Jon Cooper" <jbcooper@gte.net>
- ATM Dob mount questions
- From: "Jordan" <jfeder1@netzero.net>
- ATM tripod mounting of Cannon IS Bino's
- From: Joseph Johnston <usc@sover.net>
- ATM JMI DRO controler
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Boundary layer (was plate glass)
- From: Joseph Johnston <usc@sover.net>
- Re: ATM SiO Overcoating
- From: jroweapp@swbell.net
- Re: ATM SiO Overcoating
- From: jroweapp@swbell.net
- Re: ATM Rebuilding a DS16
- From: "Juan Herrero" <jherrero@videotron.ca>
- Re: ATM alaska question
- From: "Juan Herrero" <jherrero@videotron.ca>
- ATM Computer Alt/Az control
- From: Justin Kelly <iustus@home.com>
- Re: ATM Computer Alt/Az control - clarification
- From: Justin Kelly <iustus@home.com>
- Re: ATM Computer Alt/Az control - clarification
- From: Justin Kelly <iustus@home.com>
- ATM Oskar Knab
- From: Karl E Lewis <kal1971@juno.com>
- ATM Secondary Obstruction: A Real-Life Experience
- From: Karl E Lewis <kal1971@juno.com>
- ATM Central Obstruction and Unobstructed Alternatives
- From: Karl E Lewis <kal1971@juno.com>
- ATM 2" Eyeguard
- From: Karl E Lewis <kal1971@juno.com>
- ATM S&T Folded Refractor
- From: Karl E Lewis <kal1971@juno.com>
- ATM Gold Flats
- From: Karl E Lewis <kal1971@juno.com>
- ATM A Webpage
- From: Karl E Lewis <kal1971@juno.com>
- ATM Alternative Sources for 1/20 Wave Flats
- From: Karl E Lewis <kal1971@juno.com>
- Re: ATM Alternative Sources for 1/20 Wave Flats
- From: Karl E Lewis <kal1971@juno.com>
- Re: ATM Alternative Sources for 1/20 Wave Flats
- From: Karl E Lewis <kal1971@juno.com>
- ATM SiO Overcoating
- From: Karl E Lewis <kal1971@juno.com>
- Re: ATM changes at Edmund Scientific
- From: Karl E Lewis <kal1971@juno.com>
- ATM: PVC Piping
- From: "Keith A. Latulippe" <k.latulippe@worldnet.att.net>
- ATM Paramythioti
- From: "Keith A. Latulippe" <k.latulippe@worldnet.att.net>
- Re: ATM Hyperbola or TDE w/hole?
- From: Ken <lowther@att.net>
- Re: ATM grits
- From: Ken <lowther@att.net>
- Re: ATM Slightly off topic
- From: Ken <lowther@att.net>
- Re: ATM Correction-PitchLapQuestion
- From: Ken <lowther@att.net>
- Re: ATM Off topic question
- From: Ken <lowther@att.net>
- Re: ATM What size lap?
- From: Ken <lowther@att.net>
- Re: ATM PLOP Mirror Cell Results for a 24"
- From: Ken <lowther@att.net>
- Re: ATM Newby question
- From: Ken <lowther@att.net>
- Re: ATM What size lap?
- From: Ken <lowther@att.net>
- Re: ATM Dall-Kirkham update
- From: Ken <lowther@att.net>
- Re: ATM Off-Topic Posts + Archives
- From: Ken <lowther@att.net>
- Re: ATM What size lap?
- From: Ken <lowther@att.net>
- Re: ATM scope.exe and control
- From: Ken <lowther@att.net>
- ATM Dew Heater Board Layout
- From: Ken <lowther@att.net>
- Re: ATM Zonal Problems
- From: Ken <lowther@att.net>
- Re: ATM 20 inch mirror
- From: Ken <lowther@att.net>
- ATM Collimation page added
- From: Ken <lowther@att.net>
- ATM Web page editor needed
- From: Ken <lowther@att.net>
- Re: ATM Any recommended mirror aluminizers in Oz?....
- From: Ken <lowther@att.net>
- Re: ATM PCB cad?
- From: Ken <lowther@att.net>
- Re: ATM PCB cad?
- From: Ken <lowther@att.net>
- Re: ATM What size to cut for my next project...
- From: Ken <lowther@att.net>
- Re: ATM silvering update
- From: Ken <lowther@att.net>
- Re: ATM In Defense of Plate Glass
- From: Ken <lowther@att.net>
- Re: ATM Question re: Interpreting Tex Results
- From: Ken <lowther@att.net>
- Re: ATM another, unrelated question
- From: Ken <lowther@att.net>
- RE: ATM Mirror Boxes vs. Mirror Frames
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM What size lap?
- From: "Ken Bertapelle" <kenb@cqg.com>
- ATM Question re: lights, shadows
- From: "Ken Bertapelle" <kenb@cqg.com>
- ATM RE: PVC Piping
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM Date: Tue, 27 Feb 2001 15:40:22 -0500
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM Sticky dot
- From: "Ken Bertapelle" <kenb@cqg.com>
- ATM Question re: Interpreting Tex Results
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM Dob mount questions
- From: "Ken Bertapelle" <kenb@cqg.com>
- Re: ATM "Houston, we have glass blanks!!!"
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Zonal Problems
- From: "Ken Hunter" <kb7h@onemain.com>
- ATM Flats... how to make
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Star Testing
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: Grinding stand Was "RE: ATM Finished 80 grit I think?...." Now the next step..........
- From: "Ken Hunter" <kb7h@onemain.com>
- ATM ULTRA FLAT BLACK
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM Computer Alt/Az control - clarification
- From: "Ken Hunter" <kb7h@onemain.com>
- Re: ATM How to Grind Identical Mirrors?
- From: "Ken Hunter" <kb7h@onemain.com>
- Re:ATM Eye Surgery (Was ATM Refiguring soft,wet objective pairs)
- From: Ken Hunter <kb7h@onemain.com>
- Re:ATM Eye Surgery (Was ATM Refiguring soft,wet objective pairs)
- From: Ken Hunter <kb7h@onemain.com>
- ATM re: first light
- From: Kenneth Scharf <scharkalvin@yahoo.com>
- Re: ATM glass
- From: Kenneth Scharf <scharkalvin@yahoo.com>
- ATM casting lead
- From: Kenneth Scharf <scharkalvin@yahoo.com>
- ATM 16" spherical long-focus mirrors
- From: Kenneth Scharf <scharkalvin@yahoo.com>
- Re: ATM 16" spherical long-focus mirrors
- From: Kenneth Scharf <scharkalvin@yahoo.com>
- ATM pvc tubes
- From: Kenneth Scharf <scharkalvin@yahoo.com>
- RE: ATM Alternative Sources for 1/20 Wave Flats
- From: "Kestly, J David" <jdkestl@sandia.gov>
- Re: ATM focal lenght
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Re: HELP!: Al and HCl
- From: Kevin M Whitefire <kwhitefire@juno.com>
- ATM Anastigmatic and coma correction in unobstructed reflectors
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM What size lap?
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Dall-Kirkham update
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM 45.7cm f/6 -> f/4.x?
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Anastigmatic and coma correction in unobstructed reflectors
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM - Dental Stone Tools and Lap Foundations; blow, suck?
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Finished 80 grit I think?....
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Re: Plywood Ball Bearings
- From: Kevin M Whitefire <kwhitefire@juno.com>
- ATM Refractors Of Unusual Sizes
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Web page editor needed
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Coatings and Disposal
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM What size to cut for my next project...
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM lens design
- From: "Klaas Honders" <k.honders@worldonline.nl>
- Re: ATM 16" spherical long-focus mirrors
- From: "Klaas Honders" <k.honders@worldonline.nl>
- ATM Polishing stuff
- From: "Klaas Honders" <k.honders@worldonline.nl>
- Re: ATM In Defense of Plate Glass
- From: "Klaas Honders" <k.honders@worldonline.nl>
- ATM Telescope Optics Workshop
- Re: ATM Refractors Of Unusual Sizes
- Re: ATM What size to cut for my next project...
- ATM re-examining molds for slumping
- Re: ATM Slumping question
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM 16" spherical long-focus mirrors
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM Equatorial platforms
- From: Larry Arnold <larry19@home.com>
- Re: ATM The Sacred Archives ..oppinion
- From: "Larry Kruzan" <larry@kruzan.com>
- Re: ATM The Sacred Archives ..oppinion
- From: "Larry Kruzan" <larry@kruzan.com>
- ATM PVC Piping
- From: "Larry Kruzan" <larry@kruzan.com>
- Re: ATM RE: PVC Piping
- From: "Larry Kruzan" <larry@kruzan.com>
- Re: ATM Electric focusser
- From: "Larry Kruzan" <larry@kruzan.com>
- Re: ATM RE: PVC Piping
- From: "Larry Kruzan" <larry@kruzan.com>
- Re: ATM another, unrelated question
- From: "Launie, Kenneth J" <LAUNIEK@polaroid.com>
- Re: ATM Diagonal size, distances from main mirror to final focus
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Slumping question
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM PCB software
- From: les <les@hildenbrandt.com>
- Re: ATM 45.7cm f/6 -> f/4.x?
- From: Lew Cook <lcoo@yahoo.com>
- ATM Radioactivity - CeO
- From: Lew Cook <lcoo@yahoo.com>
- Re: ATM: good photo of anodized surface
- Re: ATM The Sacred Archives ..oppinion
- Re: ATM The Sacred Archives ..oppinion
- ATM 2 Flat questions
- Re: ATM Matsumoto's binocular telescope
- From: lindbergs1 <lindbergs1@home.com>
- ATM Schupmann - Daley
- From: "Lock,Tony [Dartmouth]" <Tony.Lock@EC.GC.CA>
- RE: ATM Artifact or Salvage - Astro-Compass MKII
- From: "Loren A. Busch" <lbusch@ix.netcom.com>
- DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
- From: Mail System Internal Data <MAILER-DAEMON@system.umsystem.edu>
- Re: ATM Shief
- From: Mal J MacDonald <malmac2@juno.com>
- Re: ATM Equatorial platforms - motors
- From: Mal J MacDonald <malmac2@juno.com>
- Re: ATM Re: Kydex
- From: Mal J MacDonald <malmac2@juno.com>
- Re: ATM accuracy in spherometer
- From: Mal J MacDonald <malmac2@juno.com>
- Re: ATM Which tool works the best?
- From: Mal J MacDonald <malmac2@juno.com>
- ATM Do it yourself Water Cutter?
- From: "Malcolm Kynoch" <malcolm@aztec-net.com>
- RE: ATM Equatorial platforms - motors
- From: Malcolm Macdonald <toliman@wave.co.nz>
- Re: ATM Equatorial platforms - motors
- From: Malcolm Macdonald <toliman@wave.co.nz>
- Re: ATM Home made large, low-profile ball-bearings?
- From: Malcolm Macdonald <toliman@wave.co.nz>
- Re: ATM Home made large, low-profile ball-bearings?
- From: Malcolm Macdonald <toliman@wave.co.nz>
- Re: ATM Poured tool release agents? Arrggh...
- From: Malcolm Macdonald <toliman@wave.co.nz>
- ATM Digest to HTML converter, Also e-mail header language question.
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM Re: HELP!
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM Re: HELP!
- From: "Mark D. Holm" <mdholm@telerama.com>
- ATM Re: Kydex
- From: "Mark D. Holm" <mdholm@telerama.com>
- ATM Viruses harmless in digest
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM Oscillating Peltier Supply (CB245)
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM Anastigmatic and coma correction in unobstructed reflectors
- From: "Mark VandeWettering" <markv@pixar.com>
- Re: ATM 16" spherical long-focus mirrors
- From: "Mark VandeWettering" <markv@pixar.com>
- Re:ATM Refiguring soft,wet objective pairs
- From: "Martti Koskimo" <martti.koskimo@kolumbus.fi>
- Re:ATM DK figuring Question
- From: "Martti Koskimo" <martti.koskimo@kolumbus.fi>
- Re:ATM PLOP Mirror Cell Results for a 24"
- From: "Martti Koskimo" <martti.koskimo@kolumbus.fi>
- Re: ATM PLASTER TILE TOOLS
- From: "Martti Koskimo" <martti.koskimo@kolumbus.fi>
- ATM RE:Cutting Zerodur pt 2
- From: "Martti Koskimo" <martti.koskimo@kolumbus.fi>
- RE: ATM Electric focusser
- From: "Martyn, Andrew" <martyn@rlmsystems.com.au>
- Re: ATM Viruses harmless in digest
- ATM FW: [RASCALS] Square Optics
- From: "McHatten, Shawn" <Shawn.McHatten@aliant.ca>
- RE: ATM Alternative Sources for 1/20 Wave Flats
- From: "McHatten, Shawn" <Shawn.McHatten@aliant.ca>
- ATM quality of 1st time mirror
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM scope.exe and control
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Archives?
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Final 22" reflector design
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM In Defense of Plate Glass
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Re: Boundary layer (was plate glass)
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM Tracking the Space Station?
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM roughing my 12.5 stnd
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Secondary Obstruction: A Real-Life Experience
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM focal length
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM 22"
- From: Mel Bartels <mbartels@efn.org>
- ATM amateur activities in the Bay Area this week
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Remedial Figuring
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Re- Bruce's 22" design
- From: Mel Bartels <mbartels@efn.org>
- plate glass source for ATM community
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Forces & Truss geometry
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Boundary layer (was plate glass)
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM astimatism in 20 inch scope
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Question re: Interpreting Tex Results
- From: Mel Bartels <mbartels@efn.org>
- ATM changes at Edmund Scientific
- From: "Michael D. Crawford" <crawford@goingware.com>
- Re: ATM S&T Folded Refractor
- From: "Michael D. Turner" <mike@lcl-imaging.com>
- Re: ATM S&T Folded Refractor
- From: "Michael D. Turner" <mike@lcl-imaging.com>
- Re: ATM Equatorial platforms
- From: astro.electronic@t-online.de (Michael Koch)
- ATM New erecting mirror system
- From: astro.electronic@t-online.de (Michael Koch)
- ATM New erecting mirror system
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM New erecting mirror system
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM Alternative Sources for 1/20 Wave Flats
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM Inverse Ronchi Screens
- From: Michael Lindner <mikell@optonline.net>
- ATM What size lap?
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM What size lap?
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Web page editor needed
- From: Michael Lindner <mikell@optonline.net>
- ATM Coatings and Disposal
- From: Michael Lindner <mikell@optonline.net>
- ATM Sticky dot
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Sticky dot
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Question re: Interpreting Tex Results
- From: Michael Lindner <mikell@optonline.net>
- ATM OK, now it's time to pour the tool
- From: Michael Lindner <mikell@optonline.net>
- ATM Thanks, the tool is poured
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Question re: Interpreting Tex Results
- From: Michael Lindner <mikell@optonline.net>
- ATM The coninuing saga...
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Dall-Kirkham update
- From: Michael Peck <mpeck1@ix.netcom.com>
- ATM Re: Anastigmatic and coma correction in unobstructed reflectors
- From: Michael Peck <mpeck1@ix.netcom.com>
- ATM Re: Anastigmatic and coma correction in unobstructed reflectors
- From: Michael Peck <mpeck1@ix.netcom.com>
- ATM Re: FW: [RASCALS] Square Optics
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM 16" spherical long-focus mirrors
- From: Michael Peck <mpeck1@ix.netcom.com>
- ATM Subject header goof
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM 16" f/0.5
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM - Dental Stone Tools and Lap Foundations
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM S&T Folded Refractor
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM Dob mount questions
- From: spooner@page.az.net (Michael Spooner)
- ATM PCB cad?
- From: "Mike" <lx50@videotron.ca>
- Re: ATM quality of 1st time mirror
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Re: HELP!
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Newby question
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM OT - 3 Bedroom House???
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM - Dental Stone Tools and Lap Foundations
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM The Sacred Archives ..oppinion
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM The Sacred Archives ..oppinion
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM The Sacred Archives ..oppinion
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM The Sacred Archives ..oppinion
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Filter bumping into light path
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Poured tool release agents? Arrggh...
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM I'm back
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM A little challenge.
- From: Mike Coslo <mjc5@psu.edu>
- RE: ATM Equatorial platforms - motors
- From: Mike Warne <mwarne@pihana.com>
- RE: ATM Electric focusser
- From: Mike Warne <mwarne@pihana.com>
- RE: ATM Date: Tue, 27 Feb 2001 15:40:22 -0500
- From: Mike Warne <mwarne@pihana.com>
- RE: ATM Dob mount questions
- From: Mike Warne <mwarne@pihana.com>
- RE: ATM Tracking the Space Station?
- From: "Mike Winner" <mwinner@cfl.rr.com>
- ATM Sky Eye 6" Reflector
- From: "Mike Winner" <mwinner@cfl.rr.com>
- Re: ATM Refiguring soft,wet objective pairs
- From: mjc5 <mjc5@psu.edu>
- Re: ATM The Sacred Archives ..oppinion
- From: mjc5 <mjc5@psu.edu>
- Re: ATM The Sacred Archives ..oppinion
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Aluminum Mirrors
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Polishing Bare Aluminum
- From: mjc5 <mjc5@psu.edu>
- Re: ATM polishing-help
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Viruses harmless in digest
- From: mjc5 <mjc5@psu.edu>
- Re: ATM lead counter weight casting
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Archives?
- From: mjc5 <mjc5@psu.edu>
- ATM Light pollution filters
- From: <mriehl@dellepro.com>
- Re: ATM Electric focusser
- From: <mriehl@dellepro.com>
- RE: ATM lead counter weight casting
- From: "Myers, Alan" <AMyers@IKON.com>
- Re: ATM Mirror Boxes vs. Mirror Frames
- Re: ATM Mounting an 80mmST as a finder
- Re: ATM Dob mount questions
- Re: ATM Newby question
- Re: ATM S&T Folded Refractor
- Re: ATM Equatorial platforms
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Equatorial platforms
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Mirror Boxes vs. Mirror Frames
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Re: IT'S 88 ALRIGHT.] + another question
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM PLOP Mirror Cell Results for a 24"
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Equatorial platforms
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Rebuilding a DS16
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM mistakes
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>