Amateur Telescope Makers (ATM) Archive for FEB00 - by author
- ATM supplies, silences and frustration (long)
- From: " Gianluca Carinci" <g.carinci@tiscalinet.it>
- ATM NGW and optical glass supplies
- From: " Gianluca Carinci" <g.carinci@tiscalinet.it>
- ATM Airplane windows
- From: "A R" <ruuddawgg@hotmail.com>
- RE: ATM scope decision / question
- From: "A R" <ruuddawgg@hotmail.com>
- RE: ATM scope decision / question
- From: "A R" <ruuddawgg@hotmail.com>
- ATM Power supplies for Foucault Testers
- From: "A R" <ruuddawgg@hotmail.com>
- Re: ATM SEC: UNCLASSIFIED. Optical quality measurements
- From: "A R" <ruuddawgg@hotmail.com>
- ATM Oops here's the link
- From: "A R" <ruuddawgg@hotmail.com>
- Re: ATM Pre-ground F8 mirror
- From: "A R" <ruuddawgg@hotmail.com>
- UK ATM'ers - Source of Kydex
- From: Adam Stephens <adamstephens@altavista.net>
- ATM tune-up 17.5inch Dob
- From: Adam Stephens <adamstephens@altavista.net>
- ATM Can you Foucault test a coated mirror?
- From: Adam Stephens <adamstephens@altavista.net>
- ATM Ebony Star for UK
- From: Adam Stephens <adamstephens@altavista.net>
- ATM electron telescope ?
- From: Adams <adams@rmci.net>
- ATM SEC: UNCLASSIFIED. Mels Motor Drive
- From: afmartyn@raaf.defence.gov.au
- ATM SEC: UNCLASSIFIED. Best Roller Drive Material
- From: afmartyn@raaf.defence.gov.au
- ATM SEC: UNCLASSIFIED. Truss Bending Calculations
- From: afmartyn@raaf.defence.gov.au
- SEC: UNCLASSIFIED. RE: ATM equatorial mount
- From: afmartyn@raaf.defence.gov.au
- ATM SEC: UNCLASSIFIED. Optical quality measurements
- From: afmartyn@raaf.defence.gov.au
- ATM Servo Motor Control
- From: "albert menno schuitema" <alberts@amazed.nl>
- Re: ATM Down South Viewing
- From: Andres.Dandler.97@Alum.Dartmouth.ORG (Andres Dandler 97)
- Re: ATM Types Of Glass.
- From: andrew <alocky@geol.uwa.edu.au>
- ATM Starting a 17.5" blank.
- From: andrew <alocky@geol.uwa.edu.au>
- Re: ATM grinding powders
- From: andrew <alocky@geol.uwa.edu.au>
- ATM Looking for WWW
- From: "Andrew Opala" <andrew_opala@hotmail.com>
- RE: ATM Aluminum mirror progress & questions
- From: Andy Saulietis <iss@pvtnetworks.net>
- RE: ATM Re: Why is Pyrex Better?
- From: Andy Saulietis <iss@pvtnetworks.net>
- RE: ATM Airplane windows
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM possible fraud - be cautious
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Flat black paint
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Flat black paint
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Flat black paint
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Flat black paint
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Flat black paint
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Only two choices for mirror coatings? Maybe not..
- From: Andy Saulietis <iss@pvtnetworks.net>
- ATM: More Steppers...
- From: "angel caparros" <acapa@hotmail.com>
- Re: ATM Tempered Glass
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM tempered porthole glass/prices
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM 12" porthole
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM plaster/alcohol
- From: Anthony Stillman <atmer@flash.net>
- ATM Membrane Mirrors was (Is Zero CTE needed?)
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM electron telescope ?
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Re: slump club/update
- From: Anthony Stillman <atmer@flash.net>
- RE: ATM Re: slump club/update
- From: Anthony Stillman <atmer@flash.net>
- adaptive optics was (Re: ATM slightly off topic ?)
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM polishing temperatures
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM membrane mirror
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM SIXTESTS controversy - what's all this theory good for?
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Accuracy
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM cutting edge
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM NGW and optical glass supplies
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Off-Axis Maksutov: perfect planetary scope?
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Off-Axis Mak.-Cassegrain
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM PETZVAL LEN ASSEMBLIES
- From: Anthony Stillman <atmer@flash.net>
- ATM Interesting Links
- From: Anthony Stillman <atmer@flash.net>
- ATM Conrady
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM How to Prevent Astigmatism in Thin Mirror?
- From: Anthony Stillman <atmer@flash.net>
- ATM Shipping Glass
- From: Anthony Stillman <atmer@flash.net>
- ATM OSLO help
- From: Archer Sully <archer@meer.net>
- ATM Eyepiece information
- From: "Art Russell" <artrussell@mindspring.com>
- ATM Truss Tube Dobsonian Telescope
- From: "Ashley Hawkins" <ahawkins@zip.com.au>
- Re: ATM Carbon fiber truss tubes - sail board masts?
- ATM Re BVC
- Re: ATM Flat black paint
- ATM corrector lens
- ATM corrector lens
- Re: ATM India ink
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- ATM AR coating and wavelength
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- ATM Collimation and pointing accuracy
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- Re: ATM RE LED voltage
- Re: ATM Truss Bending Calculations (long)
- From: "Bell, Andrew" <AMB2@pge.com>
- re: ATM metal mirror history
- From: "Bell, Andrew" <AMB2@pge.com>
- ATM Stage for Caustic Test
- From: "Bennett, Thomas D" <thomas.d.bennett@lmco.com>
- FW: ATM Stage for Caustic Test
- From: "Bennett, Thomas D" <thomas.d.bennett@lmco.com>
- ATM Figuring Out Astimatism
- From: "Bennett, Thomas D" <thomas.d.bennett@lmco.com>
- Re: ATM Carbon fiber truss tube
- From: "Benoit Schillings" <benoit@be.com>
- Re: ATM Flat black paint
- From: "Benoit Schillings" <benoit@be.com>
- ATM truss tube connectors question
- From: "Benoit Schillings" <benoit@be.com>
- ATM Re: Keep it Simple?
- From: "Bill Cook" <atmj1@conceptsnet.com>
- Re: ATM Carbon fiber truss tubes - ski poles?
- From: "Bill Cotten" <billsas@worldnet.att.net>
- Re: ATM India ink
- From: "Bill Cotten" <billsas@worldnet.att.net>
- Re: ATM CHAT
- From: "Bill Cotten" <billsas@worldnet.att.net>
- ATM Wondering about those kit grinding tool ridges.....
- From: Bill Gillespie <bgillespie@pcrs.net>
- ATM Aluminizing Chambers ?
- From: Bill Gillespie <bgillespie@pcrs.net>
- ATM NEWBIE - Confused on Proper Strokes .... Help?? : )
- From: Bill Gillespie <bgillespie@pcrs.net>
- ATM Newbie Novice Confusion ?? Proper Grinding Strokes/Method ?? HELP! ; )
- From: Bill Gillespie <bgillespie@pcrs.net>
- ATM Collective medium blank cost comparisons #001 :Newport vs. BVC, 11 - 14 inch.
- From: Bill Gillespie <bgillespie@pcrs.net>
- Re: ATM Collective medium blank cost comparisons #001 :Newport vs. BVC, 11 - 14 inch.
- From: Bill Gillespie <bgillespie@pcrs.net>
- ATM Medium mirror blank costs #2 :Willman-Bell and 3/4 plate glass.
- From: Bill Gillespie <bgillespie@pcrs.net>
- Re: ATM Telescope/Optics Workshop
- From: Bill Gillespie <bgillespie@pcrs.net>
- Re: ATM Testing Optical Glass for Quality
- From: Bill McHale <wmchal1@umbc.edu>
- ATM Figuring with unchanelled subdiameter lap
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- ATM New Diagonal mirror
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- RE: ATM Telescope-making in Africa
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- ATM Please...help me (again...)
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- RE: ATM Please...help me (again...)
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- RE: ATM Mirror
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- RE: ATM Please...help me (again...)
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- RE: ATM Figuring is Cruel and Unusual Punishment
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- RE: ATM Please...help me (again...)
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- RE: ATM Pease help-stubborn TUE (This one is long)
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- RE: ATM reusing glass tool
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- ATM OT: Organizing a star party
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- ATM Trick to help correcting the right zone in figuring
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- RE: ATM Plaster tool pitch lap questions
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- RE: ATM Bevelling after figuring - scratches?
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- ATM Star Testing
- From: Bob Van Deusen <bobmsb@prairie.lakes.com>
- ATM RE: Star Testing
- From: Bob Van Deusen <bobmsb@prairie.lakes.com>
- Re: ATM Quieting my noisy steppers...
- From: Bradley Davy <bdavy@fred.net>
- Re: ATM Please...help me (again...)
- From: Bradley Davy <bdavy@fred.net>
- ATM Parts for sale
- From: Brant Katkansky <bmk@pobox.com>
- Re: ATM Parts for sale
- From: Brant Katkansky <bmk@pobox.com>
- ATM Re: APO's
- From: Bratislav Curcic <Bratislav.Curcic@ericsson.com.au>
- ATM Re Optical quality measurements
- From: Bratislav Curcic <Bratislav.Curcic@ericsson.com.au>
- ATM Beginners question about altitude trunion surface
- From: brauch <a.brauch@okay.net>
- Re: ATM Carbon fiber truss tubes - sail board masts?
- From: "Brent Russell" <brussel@global.co.za>
- ATM Quieting my noisy steppers...
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM Glass Plate Cutting
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM making my own tool
- From: Brett Schaerer <schaerb@ava.bcc.orst.edu>
- Re: ATM 10 in Dob vignetting
- From: Brett Schaerer <schaerb@ava.bcc.orst.edu>
- Re: ATM tempered glass
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Tempered Porthole Glass
- From: Brian Nestel <blast@aloha.net>
- Re: ATM electron telescope ?
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Amature Aluminizing pictures.
- From: Brian Nestel <blast@aloha.net>
- Re: ATM ccd Camerea Modification
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Will-Bell
- From: Brian Nestel <blast@aloha.net>
- Re: ATM LED voltage
- From: Brian Nestel <blast@aloha.net>
- Re: ATM chat
- From: Brian Nestel <blast@aloha.net>
- ATM spam abuse message
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Units of Measurement
- From: Brian Nestel <blast@aloha.net>
- ATM Pre-ground F8 mirror
- From: brien <briend@home.com>
- Re: ATM Telescope-making in Africa
- From: Bruce Schupler <schupler@erols.com>
- ATM silvering
- ATM Ceravolo Inteferometer.
- From: Cary Chleborad <bennu@ns.net>
- Re: ATM Ronchi test - light source - the ultimate source
- From: Cary Chleborad <bennu@ns.net>
- ATM Ceravolo Interfometer club
- From: Cary Chleborad <bennu@ns.net>
- Re: ATM metal mirror history
- From: Cary Chleborad <bennu@ns.net>
- Re: ATM SEC: UNCLASSIFIED. Best Roller Drive Material
- From: Cary Chleborad <bennu@ns.net>
- ATM-charts wanted
- From: Charles Broward <afn43753@afn.org>
- Re:ATM-Charts wanted
- From: Charles Broward <afn43753@afn.org>
- Re: Translation: ATM Serial link of 1200 meters!
- From: Charles Broward <afn43753@afn.org>
- Re: ATM LED voltage
- From: "Charles O'Donnell" <kozmickid@mindspring.com>
- ATM: Tale of two mirrors
- From: "Charles O'Donnell" <kozmickid@mindspring.com>
- Re: ATM Dave
- From: "Charles Taylor" <Chucktaylor3@Integrityol.Com>
- ATM Mirror cleaning Ect.
- From: "Chris Mansfield" <atmvega@hotmail.com>
- Re: ATM electron telescope ?
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- Re: ATM focuser/eyepiece holders
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- FW: ATM Re: Tube Balance
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- Re: ATM Re: Tube Balance-Equatorial Telescopes
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- Re: ATM Re: Tube Balance-Equatorial Telescopes
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- ATM Repeatable truss tube accuracy
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM Re: Tube Balance
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM Tube Balance
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM Tube Balance
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATMing in the April Sky & Telescope
- From: Chuck Shaw <cshaw@ghg.net>
- Re: ATMing in the April Sky & Telescope
- From: Chuck Shaw <cshaw@ghg.net>
- ATM mirror-quality
- From: "Cord-H.Scholz" <scholz@privat.kkf.net>
- Re: ATM mirror-quality
- From: "Cord-H.Scholz" <scholz@privat.kkf.net>
- ATM Polishing my 200mm mirror (OK, 197mm ;-)
- From: "Craig Perritt" <3GI@dwaf-ntl.kzntl.gov.za>
- ATM Defects and mirror polishing
- From: "Craig Perritt" <3GI@dwaf-ntl.kzntl.gov.za>
- Re: ATM OT: Picture Developing
- From: Craig Utter <utter@channel1.com>
- Re: ATM eyepiece lenses
- From: Craig Utter <utter@channel1.com>
- Re: ATM never claimed to be
- From: Craig Utter <utter@channel1.com>
- ATM Observatory Dome Control
- From: Curtis MacDonald <deepsky@union-tel.com>
- Re: ATM Observatory Designs
- From: Curtis MacDonald <deepsky@union-tel.com>
- Re: ATM Observatory Designs
- From: Curtis MacDonald <deepsky@union-tel.com>
- ATM RA drive and stepper
- From: Curtis MacDonald <deepsky@union-tel.com>
- ATM Aeroquest drives
- From: Curtis MacDonald <deepsky@union-tel.com>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Curtis MacDonald <deepsky@union-tel.com>
- Re: ATM Revised SIXTESTS validation page
- From: "Dagley" <dagley@micron.net>
- ATM Secondary Cage Truss Pole Clamps
- From: "Dagley" <dagley@micron.net>
- Re: ATM Secondary Cage Truss Pole Clamps
- From: "Dagley" <dagley@micron.net>
- Re: ATM Secondary Cage Truss Pole Clamps
- From: "Dagley" <dagley@micron.net>
- ATM Silvering, Aluminizing
- From: Dale <aetheria@concentric.net>
- RE: ATM misc comments from list owner--attachments
- From: Damian Kruger <djkruger@mpx.com.au>
- Re: ATM #$%$#@#$%$! I DROPPED IT!!!
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Carbon fiber truss tubes
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Accuracy
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Accuracy
- From: Dan Cassaro <dcass@mediaone.net>
- Re: Subject: Re: ATM Accuracy
- From: Dan Cassaro <dcass@mediaone.net>
- ATM Cassegrain secondary movement
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Accuracy
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM older DS16 mount
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Convertible Telescope
- From: Dan Cassaro <dcass@mediaone.net>
- ATM Diamond generating cups
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Off-Axis Mak.-Cassegrain
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM possible fraud - be cautious
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM possible fraud - be cautious
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Modifying a 6" f/12 refractor
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Modifying a 6" f/12 refractor
- From: Dan Cassaro <dcass@mediaone.net>
- ATM A 100% Sharpie Test?
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM A 100% Sharpie Test?
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM A 100% Sharpie Test?
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Re: Why is Pyrex Better?
- From: Dan Chaffee <dchaffee@gvi.net>
- Re: ATM eyepiece lenses
- From: Dan Chaffee <dchaffee@gvi.net>
- RE: ATM Re: Why is Pyrex Better?
- From: Dan Chaffee <dchaffee@gvi.net>
- Re: ATM Why Slump?
- From: Dan Chaffee <dchaffee@gvi.net>
- RE: ATM scope decision / question
- From: Dan Chaffee <dchaffee@gvi.net>
- Re: ATM Gallileo's scope replic question
- From: Dan Chaffee <dchaffee@gvi.net>
- RE: ATM scope decision / question
- From: Dan Chaffee <dchaffee@gvi.net>
- Re: ATM Dew tracks on the mirror and when to clean
- From: Dan Chaffee <dchaffee@gvi.net>
- Re: ATM scope decision / question
- From: Dan Chaffee <dchaffee@gvi.net>
- Re: ATM overcorrection question
- From: Dan Chaffee <dchaffee@gvi.net>
- Re: ATM Carbon fiber truss tubes - ski poles?
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Using copper as an OTA
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM eyepiece lenses
- From: Daniel Fundo <fundo@bellsouth.net>
- Re:ATM "HARDWARE"!> > groundbreaking TRS-80 computer. Costing a mere TWO THOUSAND DOLLARS, these> > machines could display two (count'em!) colors, divide a twelve-digit number> > in ten minutes flat, and only weighed about FIFTY POUNDS. Good old days.
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Re: 14.5 inch slumped!
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM grit sizes
- From: Daniel Fundo <fundo@bellsouth.net>
- ATM Cast 24" tool today for 40" bvc blank
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM Further...re: 24" tool
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM Side with tool at 0.70r zone
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM [Fwd: Side with tool at 0.70r zone]
- From: Daniel Kahraman <ishtar66@speedline.ca>
- Re: ATM Zoned Out
- From: "Dave Bevel" <davebevel@mindspring.com>
- Re: ATM Carbon fiber truss tubes - sail board masts?
- From: "Dave Bevel" <davebevel@mindspring.com>
- Re: ATM Carbon fiber truss tubes
- From: "Dave Bevel" <davebevel@mindspring.com>
- ATM New focuser design
- From: "Dave Bevel" <davebevel@mindspring.com>
- Re: ATM Interferometry and Telescopes booklet
- From: "Dave Bevel" <davebevel@mindspring.com>
- Re: ATM off topic: collimation eyepiece recommendation
- From: "Dave Bevel" <davebevel@mindspring.com>
- ATM Outlookexpress crasher
- From: "Dave Bevel" <davebevel@mindspring.com>
- ATM Outlookexpress crasher
- From: "Dave Bevel" <davebevel@mindspring.com>
- Re: ATM Outlookexpress crasher
- From: "Dave Bevel" <davebevel@mindspring.com>
- Re: ATM Fun with Dental Stone
- From: "Dave Bevel" <davebevel@mindspring.com>
- Re: ATM #$%$#@#$%$! I DROPPED IT!!!
- From: Dave Gault <daveg@tpg.com.au>
- ATM Milwaukee/Chicago ... Foucault Help
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM Making a Large Apo
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM Making a Large Apo
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM Starting a 17.5" blank
- From: Dave Gault <daveg@tpg.com.au>
- ATM Aluminising in Australia (was ATM Amature Aluminizing pictures
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM Truss Tube Dobsonian Telescope
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM in search of glass still
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM Scratches during polishing
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM Scratches during polishing
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Dave Gault <daveg@tpg.com.au>
- ATM incomplete atm-digest V1 #2018
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM tube info
- From: "Dave Pitou" <dpitou@ix.netcom.com>
- Re: ATM off topic: collimation eyepiece recommendation
- From: Dave Smith <smithers@ucla.edu>
- ATM $10 laser collimator--read on...and on...
- From: Dave Smith <smithers@ucla.edu>
- RE: ATM Amature Aluminizing pictures.
- From: Dave Smith <smithers@ucla.edu>
- ATM cutting alum. plate w/ a hole saw
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM possible fraud - be cautious
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Dave Smith <smithers@ucla.edu>
- Re:ATM Was: prices Now: trepanning/cutting glass
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM Was: prices Now: trepanning/cutting glass
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM Re: Why is Pyrex Better?
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Grinding the Back
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM How to Prevent Astigmatism in Thin Mirror?
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM How to Prevent Astigmatism in Thin Mirror?
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Glass
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Glass
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Tempered Glass
- From: davebevel@mindspring.com
- Re: ATM Rebuild of Meade DS16 mount
- From: David and Sherry Trahan <strahan@umd5.umd.edu>
- ATM Only two choices for mirror coatings? Maybe not..
- From: "David Halliday" <dhalliday@tectrol.com>
- Re: ATM Definition of a Research Grade Telescope?
- From: "David J. File" <davefile@usa.net>
- ATM Down South Viewing
- From: "David J. File" <davefile@usa.net>
- RE: ATM Down South Viewing
- From: "David J. File" <davefile@usa.net>
- Re: ATM Types Of Glass.
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Tall Pier for tall observatory - need ideas
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Computerized test update
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Pease help-stubborn TUE
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM LED voltage
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Diagonal coverage of cone
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM: My Cass'a'grin Project : DESPARATE
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- ATM Newbie Questions about materials for first telescope
- From: "david s. terrell" <n8yid@infinet.com>
- ATM Re: Newbie Questions about materials for first telescope
- From: "david s. terrell" <n8yid@infinet.com>
- ATM Quality of Big Lenses at Low Prices?
- From: David Sleeter <sleete19@idt.net>
- ATM 2" crayford pipe
- From: David Smith <smithers@ucla.edu>
- ATM endring on a truss tube dob
- From: David Smith <smithers@ucla.edu>
- ATM Basic Foucault calculation question (longish)
- From: David Smith <smithers@ucla.edu>
- Re: ATM Basic Foucault calculation question (longish)
- From: David Smith <smithers@ucla.edu>
- Re: ATM Basic Foucault calculation question (longish)
- From: David Smith <smithers@ucla.edu>
- Re: ATM Just glue the mirror to the mount!
- From: David Smith <smithers@ucla.edu>
- Re: ATM re LED voltage
- From: David Smith <smithers@ucla.edu>
- Re: ATM That outer inch in hogging
- From: David Smith <smithers@ucla.edu>
- Re: ATM MOSFET Blues
- From: "Dean Franks" <dean@worlddigital.com>
- ATM Is Zero CTE needed?
- From: Dean Ketelsen <ketelsen@as.arizona.edu>
- Re: ATM Homemade electronic focuser plans?
- From: deepsky <deepsky@usmo.com>
- Re: ATM Aluminum mirror progress & questions
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM Telescope-making in Africa
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM Telescope-making in Africa
- From: Del Stanton <sd20@earthlink.net>
- ATM Re:
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM Stepper motor querry
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM Stepper motor querry
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM Gallileo's scope replic question
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM LED voltage/amperage
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM LED voltage/amperage
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM LED voltage/amperage
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM Telescope-making in Africa
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Computerized Foucault testing - too many shades of grey?
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Re: Why is Pyrex Better?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Crudely Annealed Glass
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Re: Why is Pyrex Better?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- RE: ATM Re: Why is Pyrex Better?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- RE: ATM Re: Why is Pyrex Better?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- RE: ATM Re: Why is Pyrex Better?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Re: Why is Pyrex Better?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- RE: ATM Re: Why is Pyrex Better?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Definition of a Research Grade Telescope?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM metal mirror history
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM New CCD Camera Kit
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Spectra-Physics Lasers available.
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM LED voltage
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM LED voltage
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM LED voltage/amperage
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM chat
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM CHAT
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM - ATM ites in CA and OR
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- RE: ATM Stage for Caustic Test
- From: Don Clement <dclement@littlefeet-inc.com>
- RE: ATM Using copper as an OTA
- From: Don Clement <dclement@littlefeet-inc.com>
- RE: ATM Aluminum mirror progress & questions
- From: Don Clement <dclement@littlefeet-inc.com>
- RE: ATM New focuser design
- From: Don Clement <dclement@littlefeet-inc.com>
- RE: ATM Helical Crayford
- From: Don Clement <dclement@littlefeet-inc.com>
- RE: ATM Truss Bending Calculations (long)
- From: Don Clement <dclement@littlefeet-inc.com>
- RE: ATM Truss Bending Calculations
- From: Don Clement <dclement@littlefeet-inc.com>
- RE: ATM tune-up 17.5inch Dob
- From: Don Clement <dclement@littlefeet-inc.com>
- ATM Is Zero CTE needed?
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Is Zero CTE needed?
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Is Zero CTE needed?
- From: Donald Clement <clement@inetworld.net>
- Re: ATM 2" crayford pipe
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Re: Helical Crayford
- From: Donald Clement <clement@inetworld.net>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Donald Clement <clement@inetworld.net>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Observatory Designs.
- From: "Donn Starkey" <starkey@fwi.com>
- RE: ATM Carbon fiber truss tubes - sail board masts?
- From: Donovan Buck <donovan@bravoz.com>
- ATM Airplane windows
- From: "Doug Bodie" <dbodie@telus.net>
- No Subject
- From: "Doug Hair" <loug1@prodigy.net>
- No Subject
- From: "Doug Hair" <loug1@prodigy.net>
- Fw: ATM
- From: "Doug Hair" <loug1@prodigy.net>
- Re: ATM Down South Viewing
- From: "Doug Hair" <loug1@prodigy.net>
- ATM making my own tool
- From: "Doug Hair" <loug1@prodigy.net>
- ATM the ? about wieght
- From: "Doug Hair" <loug1@prodigy.net>
- ATM a brainstorm tell me what you think
- From: "Doug Hair" <loug1@prodigy.net>
- ATM in search of glass still
- From: "Doug Hair" <loug1@prodigy.net>
- ATM thanks for the insight on the tool i should use
- From: "Doug Hair" <loug1@prodigy.net>
- RE: ATM tubes
- From: "Doug Hair" <loug1@prodigy.net>
- ATM BVC glass
- From: "Doug Hair" <loug1@prodigy.net>
- Re: ATM BVC glass
- From: "Doug Hair" <loug1@prodigy.net>
- Re: ATM BVC glass
- From: "Doug Hair" <loug1@prodigy.net>
- ATM time to order
- From: "Doug Hair" <loug1@prodigy.net>
- Re: ATM time to order
- From: "Doug Hair" <loug1@prodigy.net>
- Re: ATM cutting alum. plate w/ a hole saw
- From: "Doug Hair" <loug1@prodigy.net>
- ATM Dave
- From: "Doug Hair" <loug1@prodigy.net>
- Re: ATM Dave
- From: "Doug Hair" <loug1@prodigy.net>
- ATM never claimed to be
- From: "Doug Hair" <loug1@prodigy.net>
- Re: ATM cutting alum. plate w/ a hole saw
- From: "Doug Hair" <loug1@prodigy.net>
- ATM tube info
- From: "Doug Hair" <loug1@prodigy.net>
- ATM tube end rings
- From: "Doug Hair" <loug1@prodigy.net>
- ATM chat
- From: "Doug Hair" <loug1@prodigy.net>
- Re: ATM CHAT
- From: "Doug Hair" <loug1@prodigy.net>
- Re: ATM Equatorial mount
- From: "Doug Hair" <loug1@prodigy.net>
- Re: ATM fork mount
- From: "Doug Hair" <loug1@prodigy.net>
- RE: ATM Carbon fiber truss tubes - sail board masts?
- From: doug kniffen <dk@usmo.com>
- ATM older DS16 mount
- From: doug kniffen <dk@usmo.com>
- Re: ATM Stage for Caustic Test
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM tempered porthole glass/prices
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM tempered porthole glass/prices
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM electron telescope ?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM : My Cass'a'grin Project : Polishing
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Accuracy
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Barlow how too?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Computerized Foucault testing
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Barlow how too?
- From: Dwight Elvey <elvey@hal.com>
- Re: Subject: Re: ATM Accuracy
- From: Dwight Elvey <elvey@hal.com>
- Re: Subject: Re: ATM Accuracy
- From: Dwight Elvey <elvey@hal.com>
- RE[2]: ATM grinding powders
- From: Dwight Elvey <elvey@hal.com>
- ATM Wire test
- From: Dwight Elvey <elvey@hal.com>
- RE[3]: ATM grinding powders
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM grinding powders
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM mirror NOT ready attn: Frank
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM mirror NOT ready attn: Frank
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM eyepiece lenses
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Amature Aluminizing pictures.
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Amature Aluminizing pictures.
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Altitude Bearing Location
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Lick 3-meter Re-Aluminizing
- From: Dwight Elvey <elvey@hal.com>
- ATM projects
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM a brainstorm tell me what you think
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM reusing glass tool
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Stepper motor querry
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Stepper motor querry
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Stepper motor querry
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Mirror testing Help
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM 4.25" Reflector Eyepieces
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Stepper motor querry
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Defects and mirror polishing
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Newbie Novice Confusion ?? Proper Grinding Strokes/Method ?? HELP! ; )
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM ot: aluminising chambers..piezo restive sensors?
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM LED voltage/amperage
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM re LED voltage
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM re LED voltage
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM LED voltage/amperage
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM overcorrection question
- From: Dwight Elvey <elvey@hal.com>
- Re: FW: ATM Re: Tube Balance
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Tube Balance
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Fun with Dental Stone
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM MOSFET Blues
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM MOSFET Blues
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Re: Tube Balance-Equatorial Telescopes
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM tune-up 17.5inch Dob
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM tune-up 17.5inch Dob
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Re: Tube Balance-Equatorial Telescopes
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM precision dial
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Secondary Mount
- From: Dwight Elvey <elvey@hal.com>
- ATM equatorial mount
- From: "Ebruster, Thomas" <Ebruster.T@bku.battenfeld.com>
- ATM How to Prevent Astigmatism in Thin Mirror?
- From: "Ed Heiny" <edheiny@npwt.net>
- ATM Need design/plans for Cheshire eyepiece
- From: Ed Stevens <ed@trillium-hollow.org>
- ATM overcorrection question
- From: Eric Uthus <uthus@badlands.nodak.edu>
- Re: ATM Outlookexpress crasher
- From: "eugene merges" <maxwebhead@mindspring.com>
- Re: ATM Is Zero CTE needed?
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM SIXTESTS controversy - what's all this theory good for?
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Stepper motor querry
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM PETZVAL LEN ASSEMBLIES
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Stepper motor querry
- From: Everett Cairns <ecairns@mcmail.cis.McMaster.CA>
- RE: ATM atm software [OT]
- From: "Fansler, David" <DFANSLER@AutoCyte.com>
- ATM Aluminum mirror progress & questions
- From: Frank Henriquez <frank@ucla.edu>
- Re: ATM slightly off topic ?
- From: Frank Henriquez <frank@ucla.edu>
- Re: ATM ccd Camerea Modification
- From: Frank Henriquez <frank@ucla.edu>
- ATM re: LED voltage
- From: Frank Henriquez <frank@ucla.edu>
- Re: ATM Serial link of 1200 meters!
- From: Frank Henriquez <frank@ucla.edu>
- Re: ATM Telescope-making in Africa
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM Bevelling after figuring - scratches?
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM Equipment at the Winter Star Party
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Trusses (more or less)
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Please...help me (again...)
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Re: Why is Pyrex Better?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM first test
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Amature Aluminizing pictures.
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Definition of a Research Grade Telescope?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Basic Foucault calculation question (longish)
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM metal mirror history
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM OT: WIN a 9.5mm eyepiece - the @stro contest for feb-mar 2000
- From: "Frank Ward" <thewards@mindspring.com>
- ATM List rules
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM India ink
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Off-Axis Mak.-Cassegrain
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM scope decision / question
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Scratches during polishing
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM possible fraud - be cautious
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Dave
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Mirror cleaning Ect.
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM cutting alum. plate w/ a hole saw
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Just glue the mirror to the mount!
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Diagonal coverage of cone
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Just glue the mirror to the mount!
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Sphere?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM overcorrection question
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM overcorrection question
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Outlookexpress crasher
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Modifying a 6" f/12 refractor
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATMing in the April Sky & Telescope
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM multiple mirror scopes.....
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM grit sizes
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM tube info
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Flouro test
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Can you Foucault test a coated mirror?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Equatorial mount
- From: "Frank Ward" <thewards@mindspring.com>
- Re: Re: ATM Turned Edge?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Flat black paint
- From: G J Martin <G.J.Martin@durham.ac.uk>
- ATM Observatory Designs.
- From: "G.J.Martin" <G.J.Martin@durham.ac.uk>
- Re: ATM Observatory Designs
- From: "G.J.Martin" <G.J.Martin@durham.ac.uk>
- ATM: Off Topic - Hall Effect and Aurorae.
- From: "G.J.Martin" <G.J.Martin@durham.ac.uk>
- Re: ATM Amature Aluminizing pictures.
- From: "G.J.Martin" <G.J.Martin@durham.ac.uk>
- ATMing in the April Sky & Telescope
- From: Gary Seronik <gseronik@netway.com>
- Re: ATM LED voltage/amperage
- From: Gary Woods <gwoods@albany.net>
- Re: ATM spam abuse message
- From: Gary Woods <gwoods@albany.net>
- ATM Re: I dropped it, [safety hint]
- From: "Geoff Dudley" <gdudley@swin.edu.au>
- ATM MX-5 CCD camera, cutting an Al tube
- From: "Geoff Dudley" <gdudley@swin.edu.au>
- ATM MX5 CCD camera- cutting an Al tube
- From: "Geoff Dudley" <gdudley@swin.edu.au>
- ATM re LED voltage
- From: "Geon" <scnte1@gte.net>
- ATM re: LED voltage
- From: "Geon" <scnte1@gte.net>
- ATM re: LED voltage
- From: "Geon" <scnte1@gte.net>
- ATM re: 10 in DOB vignetting
- From: "geon" <scnte1@gte.net>
- ATM "mail" name change
- From: "geon" <scnte1@gte.net>
- ATM equatorial mount
- From: "geon" <scnte1@gte.net>
- ATM lapidary grit
- From: "geon" <scnte1@gte.net>
- ATM re: "mail" name change
- From: "geon" <scnte1@gte.net>
- ATM Re: mail name change
- From: "geon" <scnte1@gte.net>
- ATM Re: Outlookexpress crasher
- From: "geon" <scnte1@gte.net>
- ATM Outlook express crasher
- From: "geon" <scnte1@gte.net>
- ATM RE: magic glide and alt-az bearings
- From: "geon" <scnte1@gte.net>
- ATM RE misc comments from list owner-attachments
- From: "geon" <scnte1@gte.net>
- ATM RE Outlookexpress crasher
- From: "geon" <scnte1@gte.net>
- ATM Lapidary Grit update
- From: "geon" <scnte1@gte.net>
- ATM RE Tube Balance-Equatorial Telescopes
- From: "geon" <scnte1@gte.net>
- RE ATM Tube Balance-Equatorial Telescopes
- From: "geon" <scnte1@gte.net>
- ATM My Cass'a'grin Project: DESPERATE
- From: "geon" <scnte1@gte.net>
- ATM Pre-ground F8 mirror
- From: "geon" <scnte1@gte.net>
- ATM RE Tube Balance-Equatorial Telescope
- From: "geon" <scnte1@gte.net>
- ATM grinding\polishing strokes
- From: "geon" <scnte1@gte.net>
- ATM RE grinding\polishing strokes
- From: "geon" <scnte1@gte.net>
- ATM attn: J. Lalone
- From: "geon" <scnte1@gte.net>
- ATM precision dial
- From: "geon" <scnte1@gte.net>
- ATM RE My Cass-a-grin_mysterious post
- From: "geon" <scnte1@gte.net>
- ATM Secondary Mount
- From: "geon" <scnte1@gte.net>
- ATM RE: precision dial
- From: "geon" <scnte1@gte.net>
- ATM RE: precision dial
- From: "geon" <scnte1@gte.net>
- ATM RE: secondary mount
- From: "geon" <scnte1@gte.net>
- ATM RE: Spam Abuse
- From: "geon" <scnte1@gte.net>
- ATM RE: secondary mount
- From: "geon" <scnte1@gte.net>
- ATM RE: Truss Tube configuration for 8 inch f8
- From: "geon" <scnte1@gte.net>
- ATM binocular scope
- From: "geon" <scnte1@gte.net>
- ATM Close enough to the edge?
- From: George Anderson <georgea@CAM.ORG>
- ATM Is this test valid?
- From: George Anderson <georgea@CAM.ORG>
- Re: ATM LED voltage/amperage
- From: George Anderson <georgea@CAM.ORG>
- ATM Alternate polishing compound?
- From: George Anderson <georgea@CAM.ORG>
- ATM Binocular Chair
- From: "George F. Pierce" <pierce@rice.edu>
- ATM Stepper motors
- From: "George F. Pierce" <pierce@rice.edu>
- ATM Scratches during polishing
- From: "George L. Anderson" <georgea@cae.ca>
- ATM mirrors-second hand
- From: "George, Marple" <g.amos@geoamo39.free-online.co.uk>
- ATM focuser/eyepiece holders
- From: "George, Marple" <g.amos@geoamo39.free-online.co.uk>
- Re: ATM Carbon fiber truss tubes - sail board masts?
- From: gstacy@premierweb.net (GilbertStacy)
- Re: ATM Tempered Porthole Glass
- From: gstacy@premierweb.net (GilbertStacy)
- Re: ATM Tempered Glass
- From: gstacy@premierweb.net (GilbertStacy)
- ATM BVC experience
- From: Glen Bankston <microsys@alltel.net>
- ATM Modifying a 6" f/12 refractor
- From: "Glenn" <golson@pdq.net>
- ATM from "Lessons from Noah's Ark"
- From: "Glenn Thureson" <glennt@halcyon.com>
- Re: ATM Is Zero CTE needed?
- Re: ATM Is Zero CTE needed?
- ATM FYI-SITE Moving Sale
- Re: ATM cutting alum. plate w/ a hole saw
- Re: ATM Computerized test update
- From: grinding@mbox.com.au
- Re: ATM ccd Camerea Modification
- From: grinding@mbox.com.au
- Re: ATM ccd Camerea Modification
- From: grinding@mbox.com.au
- Re: ATM Aluminizing Chambers ?
- From: grinding@mbox.com.au
- Re: ATM LED voltage
- From: grinding@mbox.com.au
- Re: ATM re LED voltage
- From: grinding@mbox.com.au
- Re: ATM LED voltage/amperage
- From: grinding@mbox.com.au
- Re: ATM LED voltage/amperage
- From: grinding@mbox.com.au
- Re: ATM re: LED voltage
- From: grinding@mbox.com.au
- Re: ATM :My Cass'a'grin Projhect
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM Big Glass -- tested beautifully (long)
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM Telescope-making in Africa
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Sow's ears -- was ATM SIXTESTS controversy - a simulation
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Telescope-making in Africa
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM grinding powders
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM off topic: collimation eyepiece recommendation
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM atm software
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Down South Viewing
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Need to Backup...
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Re: Tube Balance
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Telescope/Optics Workshop
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Bevelling after figuring - scratches?
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM inches to mm
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM Interferometry and Telescopes booklet
- From: "Guy Toutant" <guy.toutant@cegep-sept-iles.qc.ca>
- Re: ATM Amature Aluminizing pictures.
- From: "Guy Toutant" <guy.toutant@cegep-sept-iles.qc.ca>
- ATM Revised SIXTESTS validation page
- From: Harold Suiter <suiterhr@digitalexp.com>
- ATM Query about video Foucault
- From: Harold Suiter <suiterhr@digitalexp.com>
- ATM Revised SIXTESTS validation page
- From: Harold Suiter <suiterhr@digitalexp.com>
- Re: ATM LED voltage/amperage
- From: Hendrik Hoeth <hoeth@heim8.tu-clausthal.de>
- Re: ATM LED voltage/amperage
- From: Hendrik Hoeth <hoeth@heim8.tu-clausthal.de>
- Re: ATM LED voltage/amperage
- From: Hendrik Hoeth <hoeth@heim8.tu-clausthal.de>
- Re: ATM Telescope/Optics Workshop
- From: Hendrik Hoeth <hoeth@heim8.tu-clausthal.de>
- Re: ATM LED voltage/amperage
- From: Hendrik Hoeth <hoeth@heim8.tu-clausthal.de>
- ATM Help with edge problems
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- ATM Pease help-stubborn TUE
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- ATM Bevelling after figuring - scratches?
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- RE: ATM Figuring with unchanelled subdiameter lap
- From: Hugues_Laroche@ses-astra.com
- Re: ATM New Diagonal mirror
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Close enough to the edge?
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Close enough to the edge? Oooops
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Ronchi test - light source
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Help!!!!
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Scratches during polishing
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Tube Balance
- From: Hugues_Laroche@ses-astra.com
- ATM Dob balancing spreadsheet
- From: Hugues_Laroche@ses-astra.com
- ATM Serial link of 1200 meters!
- From: Hugues_Laroche@ses-astra.com
- ATM - Truss Tube configuration for 8 inch f8
- From: "Ian Jones" <ijones@orbitresearch.co.uk>
- RE: ATM Using copper as an OTA
- From: "Ian Timshel" <timshel@escape.ca>
- Re: ATM Ceravolo Inteferometer.
- From: "Igor G. Rozivika" <aso@sbor.ru>
- ATM Focuser Parts Problem
- From: Ike Stewart <ikestewart@odin.beau.lib.la.us>
- Re: ATM CHAT
- From: Ike Stewart <ikestewart@odin.beau.lib.la.us>
- Re: ATM CHAT at esprit.net
- From: Ike Stewart <ikestewart@odin.beau.lib.la.us>
- Re: ATM MOSFET Blues
- From: Jack Brindle <jackb@ricochet.net>
- Re: ATM Serial link of 1200 meters!
- From: Jack Brindle <jackb@ricochet.net>
- ATM Using Megastar and NGC MAX
- From: "James F. Heilman" <jfheilman@mindspring.com>
- Re: ATM tube info
- From: "James O'Malley" <omalleyj@eclipse.net>
- ATM YA SIXTESTS update.
- From: "James W. Burrows" <burrjaw@halcyon.com>
- ATM SIXTESTS upgrade (again).
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM SIXTESTS upgrade (again).
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Please...help me (again...)
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Foucault testing vs wavelength
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM: My Cass'a'grin Project : DESPARATE
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Observatory Dome Control
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- Re: ATM Tall Pier for tall observatory - need ideas
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- RE: ATM Re: Why is Pyrex Better?
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- RE: ATM Re: Why is Pyrex Better?
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- RE: ATM Re: Why is Pyrex Better?
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- ATM Stepper motor querry
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- ATM SLO-SYN motor
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- ATM Using copper as an OTA
- From: Jeff Leonard <jlenord@uswest.net>
- ATM 4.25" Reflector Eyepieces
- From: Jeff Paterson <JPaterson@ExhibitWorks.com>
- ATM No Difference
- From: Jeff Paterson <JPaterson@ExhibitWorks.com>
- Re: ATM MOSFET Blues
- From: "Jeffery C. Hudson" <jhudson@inreach.com>
- ATM Sorry about my digital signature....
- From: "Jeffery C. Hudson" <jhudson@inreach.com>
- ATM Tempered Glass
- From: Jerremy Baterson <jdbaterson@usa.net>
- ATM Tempered Porthole Glass
- From: Jerremy Baterson <jdbaterson@usa.net>
- ATM Queer Topic Heading
- From: Jerremy Baterson <jdbaterson@usa.net>
- Re: ATM 12" porthole
- From: jdo348@earthlink.net (Jerry Dove)
- Re: ATM Equipment at the Winter Star Party
- From: jdo348@earthlink.net (Jerry Dove)
- ATM first test
- From: jdo348@earthlink.net (Jerry Dove)
- Re: ATM List rules
- From: jdo348@earthlink.net (Jerry Dove)
- Re: ATM Truss tube bicycle seat quick release clamps?
- From: jdo348@earthlink.net (Jerry Dove)
- Re: ATM truss tube connectors question
- From: jdo348@earthlink.net (Jerry Dove)
- Re: ATM Is Zero CTE needed?
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM Is Zero CTE needed?
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM Is Zero CTE needed?
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM Tempered Glass
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM Membrane Mirrors was (Is Zero CTE needed?)
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM Re: KzFSN-4: more glimmers of hope.
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM Re: Why is Pyrex Better?
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM Re: Why is Pyrex Better?
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM Re: Why is Pyrex Better?
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM Re: Why is Pyrex Better?
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM Re-aluminizing
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM A 100% Sharpie Test?
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM Equipment at the Winter Star Party
- From: "Jim & Sue Sapp" <stars@integrityonline.com>
- Re: ATM cutting alum. plate w/ a hole saw
- From: "Jim & Sue Sapp" <stars@integrityonline.com>
- Re: ATM never claimed to be
- From: Jim Fitch <jf@arn.net>
- ATM Schmidt-Newtonian
- From: "Jim Fly" <flyj@iol-12.net>
- Re: ATM mirrors-second hand
- From: "Jim Fly" <flyj@iol-12.net>
- ATM Inquiry: Astronomy Happenings in the SF Area
- From: Jim Patras <jpatras@alaska.net>
- Re:ATM cutting alum. plate w/ a hole saw
- From: Jimmy La Fountain <lafountainj@sprintmail.com>
- ATM truss tube connectors question
- From: Jmkasunich@ra.rockwell.com
- ATM I'm grinding again
- From: Joe Campbell <joe@esper.com>
- ATM: Candle holder mirror
- From: Joe Campbell <joe@esper.com>
- ATM Candle holder mirror progress
- From: Joe Campbell <joe@esper.com>
- ATM pictures update
- From: Joe Campbell <joe@esper.com>
- ATM candle holder mirror project
- From: Joe Campbell <joe@esper.com>
- ATM Salem optical?
- From: Joe Campbell <joe@esper.com>
- Re: ATM Zoned Out
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM :My Cass'a'grin Projhect
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM Re: slump club/update
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Pitch
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM Computerized Foucault testing
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Foucault testing vs wavelength
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM Need to Backup...
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Secondary..
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM NEWBIE - Confused on Proper Strokes .... Help?? : )
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM Fluoro test
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Glass
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Re: Spam Abuse
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM Glass Plate Cutting
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Re: APO's
- From: Johan Vanbeselaere <jvb@digilife.be>
- ATM seeing
- From: Johan Vanbeselaere <jvb@digilife.be>
- Re: ATM Using copper as an OTA
- From: "John Anderson" <anderiii@mindspring.com>
- ATM Rebuild of Meade DS16 mount
- From: "John Anderson" <anderiii@mindspring.com>
- ATM Re: DS16 mount rebuild
- From: "John Anderson" <anderiii@mindspring.com>
- ATM Plaster tool pitch lap questions
- From: John.D.Gallagher@Hitchcock.ORG (John D. Gallagher)
- ATM Plaster tools for pitch laps -followup
- From: John.D.Gallagher@Hitchcock.ORG (John D. Gallagher)
- ATM New Ronchi Test Simulation Software Available
- From: "John D. Upton" <jdupton@texas.net>
- Re: ATM A 100% Sharpie Test?
- From: "John D. Upton" <upton@austin.ibm.com>
- ATM Updated Pics On Webpage
- From: "John Holland" <yojohn@vci.net>
- Re: ATM Accuracy
- From: "Jon B. Cooper" <jbcooper@gte.net>
- RE: ATM Tempered Porthole Glass
- From: "Jon Cooper" <jbcooper@gte.net>
- ATM webpage
- From: "Jonathan P. Dietrich" <jpdietrich@crosswinds.net>
- Re: ATM Quality of Big Lenses at Low Prices?
- From: "Joseph O'Neil" <joneil@multiboard.com>
- Re: ATM 4.25" Reflector Eyepieces
- From: "Joseph O'Neil" <joneil@multiboard.com>
- Re: ATM plaster/alcohol
- From: Juan Herrero <jherrero@videotron.ca>
- Re: ATM Tall Pier for tall observatory - need ideas
- From: Juan Herrero <jherrero@videotron.ca>
- Re: ATM RA drive and stepper
- From: Juan Herrero <jherrero@videotron.ca>
- Re: ATM Rebuild of Meade DS16 mount
- From: Juan Herrero <jherrero@videotron.ca>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Juan Herrero <jherrero@videotron.ca>
- ATM Cable extention lenght for for ccd camera ?
- From: Juan Herrero <jherrero@videotron.ca>
- ATM Meade primary mirrors for a home-made dob?
- From: "Keith Hogan" <hogankb@oh.verio.com>
- ATM [Fwd: Invitation to join atm-atlanta]
- From: Ken & Teresa Lilja <klilja@atl.mediaone.net>
- Re: ATM :My Cass'a'grin Projhect
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Stage for Caustic Test
- From: Ken Hunter <kb7h@ccaonline.com>
- RE: ATM Carbon fiber truss tubes - sail board masts?
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Using copper as an OTA
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM 12" porthole
- From: Ken Hunter <kb7h@ccaonline.com>
- ATM Re: Why is Pyrex Better?
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Re: Why is Pyrex Better?
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Aluminum mirror progress & questions
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM membrane mirror
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Ronchi test
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM SIXTESTS controversy - a simulation
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM SIXTESTS controversy - a simulation
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Ronchi test
- From: Ken Hunter <kb7h@ccaonline.com>
- ATM Accuracy
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Accuracy
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Accuracy
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Accuracy
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: [Fwd: Re: ATM Accuracy]
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: [Fwd: AW: ATM Accuracy]
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM mirror NOT ready attn: Frank
- From: Ken Hunter <kb7h@ccaonline.com>
- ATM spherometer spreadsheet
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM 6" final grind
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM eyepiece lenses
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Basic Foucault calc
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Revised SIXTESTS validation page
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Candle holder mirror progress
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Polishing my 200mm mirror (OK, 197mm ;-)
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Altitude Bearing Location
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Convertible Telescope
- From: Ken Hunter <kb7h@ccaonline.com>
- RE: ATM scope decision / question
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Scratches during polishing
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Ken Hunter <kb7h@ccaonline.com>
- RE: ATM scope decision / question
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM cutting alum. plate w/ a hole saw
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Diagonal coverage of cone
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM scope decision / question
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Sphere?
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM re:LED voltage
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM re LED voltage
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM re LED voltage
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM re LED voltage (correction to correction)
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM LED voltage/amperage
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM LED voltage/amperage
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM LED voltage
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM 10 in Dob vignetting
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Lapidary Grit update
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM How to Prevent Astigmatism in Thin Mirror?
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Lapidary Grit update
- From: Ken Hunter <kb7h@ccaonline.com>
- ATM Sharpie test
- From: Ken Hunter <kb7h@ccaonline.com>
- ATM Sharpie test, History of...
- From: Ken Hunter <kb7h@ccaonline.com>
- ATM CHAT
- From: Ken Hunter <kb7h@ccaonline.com>
- ATM CHAT
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM RE: My Cass'a'grin Project : DESPARATE
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM That outer inch in hogging
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM That outer inch in hogging
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Pre-ground F8 mirror
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM grinding\polishing strokes
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM [Fwd: Side with tool at 0.70r zone]
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Turned Edge?
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM precision dial
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Cdn. prices for glass and grit
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Sixtests controversy.
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM 12" porthole glass
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Figuring 6in F/8
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Re: Why is Pyrex Better?
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Re: Why is Pyrex Better?
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM SIXTESTS upgrade (again).
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Re: Why is Pyrex Better?
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Quality of Big Lenses at Low Prices?
- From: Ken Lowther <lowther@worldnet.att.net>
- ATM Computerized Foucault testing
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Computerized Foucault testing
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Ronchi test
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Computerized Foucault testing
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Computerized Foucault testing
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM SIXTESTS controversy - a simulation
- From: Ken Lowther <lowther@worldnet.att.net>
- ATM Newbies
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Accuracy
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM SIXTESTS controversy - what's all this theory good for?
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Computerized Foucault testing