Re: ATM Ahh ! Crack in mirror. Please advise.

["Jon B. Cooper" <jbcooper@gte.net>]

I (jbcooper@gte.net) did not write the following.  Please edit
carefully.

Jon Cooper

Ventura CA


ESBear49@aol.com wrote:
> 
> In a message dated 12/20/99 1:14:51 PM Eastern Standard Time,
> jbcooper@gte.net writes:
> 
> <<  Either grind it out as Roger says, or diamond drill
>  > a small hole at the end, the former preferred but the latter ok. >>
> 
>     I would have to go with grinding the crack out if at all possible. The
> stress caused by the diamond drill "might" cause the crack to run farther.
> While drilling past the edge of the crack is probably a surer way to stop the
> crack from growing, IMHO it's not worth the risk.
> 
> Regards, Ernie
> 
> ESBear@AOL.COM
> 41N 25'41"
> 73W 10'54"