Re: ATM Ahh ! Crack in mirror. Please advise.

[ESBear49@aol.com]

In a message dated 12/20/99 1:14:51 PM Eastern Standard Time, 
jbcooper@gte.net writes:

<<  Either grind it out as Roger says, or diamond drill
 > a small hole at the end, the former preferred but the latter ok. >>

    I would have to go with grinding the crack out if at all possible. The 
stress caused by the diamond drill "might" cause the crack to run farther. 
While drilling past the edge of the crack is probably a surer way to stop the 
crack from growing, IMHO it's not worth the risk.

Regards, Ernie

ESBear@AOL.COM
41N 25'41"
73W 10'54"