Amateur Telescope Makers (ATM) Archive for DEC99 - by author
- ATM newbie questions
- From: "1000m" <1000m@netzero.net>
- ATM dumb spider question
- From: "1000m" <1000m@netzero.net>
- Re: ATM OT/ turning balls on a lathe
- From: P Landless <plandless@yahoo.com.au>
- ATM strain in coated mirrors
- From: "A R" <ruuddawgg@hotmail.com>
- ATM Focusing Motor Digital Readout
- From: Adam Perkins <scopeguru@yahoo.com>
- ATM Spider vanes (4 or 3?)
- From: Adam Perkins <scopeguru@yahoo.com>
- ATM Donations to Iran
- From: Adam Perkins <scopeguru@yahoo.com>
- Re: ATM Irrigation Tube Irregularities?
- From: Adams <adams@rmci.net>
- ATM newt. focuser baffel
- From: Adams <adams@rmci.net>
- ATM NEWT
- From: Adrien Bordage <bordagea@nbnet.nb.ca>
- ATM NEWT
- From: Adrien Bordage <bordagea@nbnet.nb.ca>
- SEC: UNCLASSIFIED. RE: ATM Finder Mounting
- From: afmartyn@raaf.defence.gov.au
- SEC: UNCLASSIFIED. RE: ATM Focusing Motor Digital Readout
- From: afmartyn@raaf.defence.gov.au
- SEC: UNCLASSIFIED. RE: ATM Finder Mounting
- From: afmartyn@raaf.defence.gov.au
- SEC: UNCLASSIFIED. RE: ATM Finder Mounting
- From: afmartyn@raaf.defence.gov.au
- SEC: UNCLASSIFIED. RE: ATM Spider vanes (4 or 3?)
- From: afmartyn@raaf.defence.gov.au
- ATM Laser Collimation /Focuser Question
- From: "Al Klayton" <aklayton@pcisys.net>
- Re: ATM Laser Collimation /Focuser Question
- From: "Al Klayton" <aklayton@pcisys.net>
- ATM Laser Collimation/Focuser Question -- Update: JMI Mini 3 Focuser Problem Solved!
- From: "Al Klayton" <aklayton@pcisys.net>
- ATM Finished Primary Mirror
- From: "Alden Peterson" <petersonah@boone.net>
- ATM Protecting coated mirror.
- From: Andrew Grisdale <roadwarrior@techieguy.com>
- ATM Barn door/Scotch/Haig mount timing idea
- From: Andrew Grisdale <roadwarrior@techieguy.com>
- ATM Alternative tools?
- From: Andrew Grisdale <roadwarrior@techieguy.com>
- Re: ATM Alternative tools?
- From: Andrew Grisdale <roadwarrior@techieguy.com>
- Re: ATM Protecting coated mirror.
- From: Andrew Grisdale <roadwarrior@techieguy.com>
- Re: ATM Alternative tools?
- From: Andrew Grisdale <roadwarrior@techieguy.com>
- Re: ATM reflector coatings
- From: Andrew Grisdale <roadwarrior@techieguy.com>
- Re: ATM 35MM- Camera
- From: Andrew Grisdale <roadwarrior@techieguy.com>
- Re: Re ATM Electric Morors
- From: Andrew Grisdale <roadwarrior@techieguy.com>
- Re: ATM Powering a PC from a 12v battery
- From: Andrew Grisdale <roadwarrior@techieguy.com>
- Re: Re ATM Electric Morors
- From: Andrew Grisdale <roadwarrior@techieguy.com>
- ATM Binocular collimation? part OT
- From: Andrew Grisdale <roadwarrior@techieguy.com>
- Re: ATM F3 primary ARGHHHHHHHHHHH!
- From: Andrew Lin <alin@qualcomm.com>
- Re: ATM Barlow + Extension Tube = ?
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Manual/motorized combination dobs
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Suprax - Low expansion Glass?
- From: "angel caparros" <acapa@hotmail.com>
- ATM Firts light of 10" f6 Newton
- From: "angel caparros" <acapa@hotmail.com>
- Re: ATM Ready for a refractor.
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Ready for a refractor.
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Subdiameter pitch lap
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Re: Glass Balls
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Chamfer rear of mirror?
- From: Anthony Stillman <atmer@flash.net>
- RE: ATM Re: Newton's Telescope
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Making Tile tool
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Robert M. Edmund interview: Slightly off-topic
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Ahh ! Crack in mirror. Please advise
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Grinding a 16 inch plate
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Grinding a 16 inch plate
- From: Anthony Stillman <atmer@flash.net>
- ATM list spam (OT)
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Donations to Iran
- From: Anthony Stillman <atmer@flash.net>
- ATM 16" polishing out
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Alt. Tool
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM: Measuring pinhole diameter.
- From: Anthony Stillman <atmer@flash.net>
- RE: ATM Source of truss tubes in the UK
- From: anthony.n.butler@bt.com
- RE: ATM Polishing/figuring advice for a newbie please?
- From: anthony.n.butler@bt.com
- RE: ATM Polishing/figuring advice for a newbie please?
- From: anthony.n.butler@bt.com
- RE: ATM re: screeching
- From: anthony.n.butler@bt.com
- RE: ATM Atm Re: 10" f5.6 polishing
- From: anthony.n.butler@bt.com
- Re: ATM LARGE ALUMINUM TUBES
- Re: ATM LARGE ALUMINUM TUBES
- Re: ATM The Ideal Camera
- Re: ATM 4 tubes truss structure questions...
- ATM ASM web page?
- From: Archer Sully <archer@meer.net>
- ATM Listen to yourself...
- From: Archer Sully <archer@meer.net>
- Re: ATM LARGE ALUMINUM TUBES
- From: Archer Sully <archer@meer.net>
- Re: ATMing in the February S&T
- Re: ATMing in the February S&T
- Re: ATM PC's and extreme cold, Vol. 2
- Re: ATM A Very Bad Day
- Re: ATM Glass Slumping Club
- ATM caustic calculations
- Re: ATM caustic calculations
- ATM Caustic test question.
- Re: ATM Grinding a 16 inch plate
- ATM caustic test questions
- ATM overcorrecting for coating
- ATM big drip pans, cheap
- ATM spectrum coating-has anyone used them
- Re: ATM big drip pans, cheap
- Re: ATM The Ideal Camera
- ATM off topic Hubble
- ATM Fw: Skybeam - Nonsense
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Newton's telescope
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Re: Newton's Telescope
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Orion Mount - Off Topic
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- ATM Re: Consider the SkyBeam Stopped!
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- ATM 4 tubes truss structure questions...
- From: "Benoit Schillings" <benoit@be.com>
- Re: ATM Olympus OM-1
- From: Bill Brady <wmbrady@olg.com>
- Re: ATM Ahh ! Crack in mirror. Please advise.
- From: Bill Brady <wmbrady@olg.com>
- ATM Collimation is driving me crazy!
- From: Bill Brady <wmbrady@olg.com>
- Re: ATM Collimation is driving me crazy!
- From: Bill Brady <wmbrady@olg.com>
- ATM Re: Fiberglass Tubing
- From: "Bill Cook" <atmj1@conceptsnet.com>
- Re: ATMJ #14
- From: "Bill Cook" <atmj1@conceptsnet.com>
- Re: New ATMJ Website
- From: "Bill Cook" <atmj1@conceptsnet.com>
- Re: ATM Removing Teflon Etch?
- From: "Bill Cotten" <billsas@worldnet.att.net>
- ATM Millennial Contributions (was Re: ATM Apologies a+b+c &Business)
- From: Bill Herbert <76114.50@compuserve.com>
- Re: ATMing in the February S&T
- From: Bill McHale <wmchal1@umbc.edu>
- Re: ATM MC3479/ECG1859 replace SAA1042
- From: Bill Milner <wdmilner@uswest.net>
- RE: ATM How to make a box
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- ATM Subdiameter pitch lap
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- ATM Subdiameter lap: first polishing session
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- ATM Unchannelled subdiameter lap works well
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- RE: ATM Robert M. Edmund interview: Slightly off-topic
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- ATM Astrophotography with dobs on an equatorial platform
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- Lens for finderscope (was RE: ATM Finder Mounting)
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- RE: Lens for finderscope (was RE: ATM Finder Mounting)
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- ATM From screeches to scratches
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- ATM Dew Heater for primary mirror
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- ATM Raised Edge?
- From: Bob Van Deusen <bobmsb@prairie.lakes.com>
- ATM Upper cage
- From: Bob Van Deusen <bobmsb@prairie.lakes.com>
- ATM aerial camera lens
- ATM Spider Diffraction vs. Vane Thickness
- Re: ATM Powering a PC from a 12v battery
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Old English Mount
- From: Brad Davy <bdavy@fred.net>
- Re: ATM PC's and extreme cold, Vol. 2
- From: Bradley Davy <bdavy@fred.net>
- ATM Re: More Refractor Madness (astigmatism)
- From: Bratislav Curcic <Bratislav.Curcic@ericsson.com.au>
- ATM Re: Millies-Lacroix analysis of non-paraboloidal surfaces
- From: Bratislav Curcic <Bratislav.Curcic@ericsson.com.au>
- ATM The ultimate scopes, TNs and Mak-Newtonians
- From: Bratislav Curcic <Bratislav.Curcic@ericsson.com.au>
- Re: ATM Spider vanes (4 or 3?)
- From: "Brent Russell" <brussel@global.co.za>
- ATM Friction roller gearbox ... it works!!
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM Aligner software
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Full Moon Madness
- From: Brian Nestel <blast@aloha.net>
- Re: ATM NEWT
- From: Brian Nestel <blast@aloha.net>
- Re: ATM F3 primary ARGHHHHHHHHHHH!
- From: Brian Nestel <blast@aloha.net>
- Re: ATM darkness inside an OTA
- From: Brian Nestel <blast@aloha.net>
- ATM Seattle area: stop the SkyBeam
- From: Bruce Weertman <brucew@noperiod.com>
- ATM Oblate Spheriod question
- From: Bruce Weertman <brucew@noperiod.com>
- Re: ATM Oblate Spheriod question
- From: Bruce Weertman <brucew@noperiod.com>
- Re: ATM Spider vanes (4 or 3?) (Two replies in one)
- From: "Bryan Greer" <bgreer@fpi-protostar.com>
- Re: ATM Spider vanes (4 or 3? ) Brightness of spikes vs vane thickness
- From: "Bryan Greer" <bgreer@fpi-protostar.com>
- Re: ATM dumb spider question
- From: "Bryan Greer" <bgreer@fpi-protostar.com>
- Re: ATM Spider Diffraction
- From: "Bryan Greer" <bgreer@fpi-protostar.com>
- Re: ATM Raised Edge?
- ATM Polishing/Figuring LE Glass
- ATM Diammond Core Drills/Who wants them...
- ATM Re: Strain in commercial Pyrex
- RE: ATM Source of Truss Tubes in the UK
- From: Callum Potter <CallumP@selectst.com>
- Re: ATM Suprax - Low expansion Glass?
- From: Cary Chleborad <bennu@ns.net>
- Re: ATM NEW GRIND METHOD WORKS!
- From: Cary Chleborad <bennu@ns.net>
- Re: ATM How to make a box
- From: Charles Broward <broward@coastal.ufl.edu>
- ATM Dob mount motion
- From: "Chris Cook" <turfa@hutch.com.au>
- No Subject
- From: "Chris Mansfield" <atmvega@hotmail.com>
- ATM First Light
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- FW: ATM newbie questions
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- Re: ATM Newton's telescope
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- Re: ATM 35MM- Camera
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- Re: ATM Finder Mounting
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- Re: ATMing in the February S&T
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- Re: ATMing in the February S&T
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- Re: ATM Spider vanes (4 or 3?)
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- Re: ATM Spider vanes (4 or 3? )Brightness of spikes vs vane thickness
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- Re: ATM 3 or 4 vane spider
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- Re: ATM Spider vanes - circular
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- Re: ATM Spider vanes - circular
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- ATM Spider diffraction - spike intensity & length
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- ATM Spider Diffraction
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- Re: ATM Spider Diffraction
- From: "Christopher J.R. Lord" <chrislord@brayebrook.demon.co.uk>
- Re: ATM dumb spider question
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM strain in commercial pyrex resulting in unexpected astigmatism
- From: "Chuck Gulker" <cgulker@columbus.rr.com>
- ATM Re: atm-digest V1 #1908
- From: Clint Bach <clintbach@earthlink.net>
- ATM Source of Truss Tubes in the UK
- From: Colin Harris <COLINHARRIS4@compuserve.com>
- ATM Suprax - Low Expansion Glass
- From: Colin Harris <COLINHARRIS4@compuserve.com>
- ATM Manual/motorized combination dobs
- From: Colin Harris <COLINHARRIS4@compuserve.com>
- [Fwd: ATM 35MM- Camera]
- From: Craig Utter <utter@channel1.com>
- ATM Plaster Tool Cast-at-last!!
- From: Craig Utter <utter@channel1.com>
- Re: ATM Finder Mounting
- From: Craig Utter <utter@channel1.com>
- ATM field size
- From: Curtis MacDonald <deepsky@union-tel.com>
- ATM cassegrain spider and mirror cell
- From: Curtis MacDonald <deepsky@union-tel.com>
- ATM LARGE ALUMINUM TUBES
- From: Curtis MacDonald <deepsky@union-tel.com>
- ATM Mime-Version: 1.0
- From: Curtis MacDonald <deepsky@union-tel.com>
- ATM Al tubes: end rolling and wall thickness
- From: Curtis MacDonald <deepsky@union-tel.com>
- ATM manufacture of tool
- From: "cylert" <cylert@newsguy.com>
- ATM determining focal ratio to grind
- From: "cylert" <cylert@newsguy.com>
- ATM Mel's Dob Driver Circut - TIP120 options
- From: Damian Kruger <djkruger@mpx.com.au>
- ATM New project: AA-SPIT
- From: Dan Cassaro <dcass@mediaone.net>
- ATM KZFS type optical glass for sale
- From: Dan Cassaro <dcass@mediaone.net>
- ATM KZFS Glass for sale - SOLD OUT
- From: Dan Cassaro <dcass@mediaone.net>
- ATM Re: The Ideal Camera
- From: Dan Cassaro <dcass@mediaone.net>
- ATM: An old-fashion singlet refractor project,Part1
- From: Dan Chaffee <dchaffee@gvi.net>
- ATM: An old-fashion singlet refractor project, Part 2
- From: Dan Chaffee <dchaffee@gvi.net>
- ATM Re: An old-fashion singlet refractor project, Part 2
- From: Dan Chaffee <dchaffee@gvi.net>
- Re:ATM 8" achromat (another update)
- From: Dan Chaffee <dchaffee@gvi.net>
- ATM Leo Scanlon 1903-1999
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM newbie w/questions
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM newbie w/questions
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM How to make a box
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM In the beginning - In The Barrel
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Re: An old-fashion singlet refractor project, Part 2
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM 35MM- Camera
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM re: screeching
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM [Fwd: warm clothes, pro astronomers
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Spider Diffraction vs. Vane Thickness
- From: Daniel Fundo <fundo@bellsouth.net>
- ATM Foucault test fixture drawings
- From: "Dave Bevel" <davebevel@mindspring.com>
- Re: ATM Image analysis for CCD testers
- From: "Dave Bevel" <davebevel@mindspring.com>
- Re: ATM Coma Correctors and figuring
- From: "Dave Pitou" <dpitou@ix.netcom.com>
- Re: ATM Need some information on the use of Carbon Fibre for Dobsonian upper tube assembly
- From: "Dave Pitou" <dpitou@ix.netcom.com>
- Re: ATM Fw: mirror segments
- From: "Dave Pitou" <dpitou@ix.netcom.com>
- Re: ATM Using Baader Solar filter material
- From: Dave Smith <smithers@ucla.edu>
- ATM star testing with low power?
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM In the beginning... there was my first 6" blank.
- From: Dave Sopchak <das@po.cwru.edu>
- ATM stripping coatings- safety
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Robert M. Edmund interview: Slightly off-topic
- From: Dave Sopchak <das@po.cwru.edu>
- ATM foucault drawings
- From: davebevel@mindspring.com
- Re: ATM Spider vanes (4 or 3?)
- From: David and Sherry Trahan <strahan@umd5.umd.edu>
- Re: ATM In the beginning... there was my first 6" blank.
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM RE: Little Mirror Man.
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: Re: ATM RE: Little Mirror Man.
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM inside the secondary cage
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM LARGE ALUMINUM TUBES
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Robert M. Edmund interview: Slightly off-topic
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM F3 primary ARGHHHHHHHHHHH!
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- ATM Re: Low eyepiece height
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATMing in the February S&T
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- ATM Re: Strain in commercial Pyrex
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM omikron and TDE
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Ronchi Test
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Alt. Tool
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Polishing Begins
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- ATM Ready for a refractor
- From: Dean Ketelsen <ketelsen@as.arizona.edu>
- Re: ATM Focusing Motor Digital Readout
- From: Del Stanton <sd20@earthlink.net>
- Re: ATM Re: Fiberglass Tubing
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Making Tile tool
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Wierd mirror mistakes
- From: Dennis Rech <dennisrech@home.com>
- ATM Important SAA1042 information
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM MC3479/ECG1859 replace SAA1042
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Powering a PC from a 12v battery
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Robert M. Edmund interview: Slightly off-topic
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Amplifier for photodiodes
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM The Ideal Camera
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM The Ideal Camera
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM info on linux/BSD telescope programming
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM porthole glass source
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM PC's and extreme cold, Vol. 2
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- RE: ATM OT/ turning balls on a lathe
- From: Don Clement <dclement@Little-ft.com>
- RE: ATM Re: Glass Balls
- From: Don Clement <dclement@littlefeet-inc.com>
- Re: ATM Binocular Chair
- From: Donovan Buck <donovan@bravoz.com>
- ATM Foucalt testing
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM Foucalt testing
- From: Donovan Buck <donovan@bravoz.com>
- ATM re: atm-digest V1 #1896
- From: "Doug Arion" <ariond1@carthage.edu>
- ATM reflector coatings
- From: doug kniffen <dk@usmo.com>
- Re: ATM darkness inside an OTA
- From: doug kniffen <dk@usmo.com>
- ATM 3 or 4 vane spider
- From: doug kniffen <dk@usmo.com>
- Re: ATM Collimation is driving me crazy!
- From: doug kniffen <dk@usmo.com>
- Re: ATM 3 or 4 vane spider
- From: doug kniffen <dk@usmo.com>
- Re: ATM Collimation is driving me crazy!
- From: doug kniffen <dk@usmo.com>
- Re: SV: ATM Collimation is driving me crazy!
- From: doug kniffen <dk@usmo.com>
- ATM Mary Christmas!
- From: Dragan Miladinovic <dragmila@EUnet.yu>
- RE: ATM Source of truss tubes in the UK
- From: "Dunk B." <Dunk@MyOdyssey.Freeserve.co.uk>
- Re: ATM PC's and extreme cold, Vol. 2
- From: "Dunk B." <Dunk@MyOdyssey.Freeserve.co.uk>
- Re: ATM newbie w/questions
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM newbie questions
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Upper cage
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM "collimating" diagonals
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Making Tile tool
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Making Tile tool
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM 35MM- Camera
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Star Test??
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Powering a PC from a 12v battery
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Powering a PC from a 12v battery
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Powering a PC from a 12v battery
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Powering a PC from a 12v battery
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Ahh ! Crack in mirror. Please advise.
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Foucalt testing
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Foucalt testing
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Barlow + Extension Tube = ?
- From: Dwight Elvey <elvey@hal.com>
- Re: SV: ATM Foucalt testing
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Spider vanes (4 or 3? ) Brightness of spikes vs vane thickness
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Collimation is driving me crazy!
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Image analysis for CCD testers
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Foucalt testing
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM What quality of flat do I need :--
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM How to make a box
- From: Ed Falk <Ed.Falk@Eng.Sun.COM>
- ATM polishing temperature question.
- From: Ed Stevens <ed@trillium-hollow.org>
- Re: ATM A new discovery - a Brassiere Scope
- From: Edwin Spector <ems@lucent.com>
- ATM: Measuring pinhole diameter.
- From: Eli Vandevoorde <elivv@efn.org>
- Re: ATM: Measuring pinhole diameter.
- From: Eli Vandevoorde <elivv@efn.org>
- ATM Aligner software
- From: "Erik Green" <erik@strategixid.com>
- Re: ATM OT/ turning balls on a lathe
- ATM: stripping coatings
- Re: ATM Looking for mirror vendors
- Re: ATM Ahh ! Crack in mirror. Please advise.
- Re: ATM oil slick on mirror
- Re: ATM ZEMAX 9.0 has Foucault knife edge testing option
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM ZEMAX 9.0 has Foucault knife edge testing option
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Low wind load baffle, & etc
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM ZEMAX 9.0 has Foucault knife edge testing option
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Cylindrical lens/mirror for KE test? Not without a diffuser!
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.CA>
- Re: ATM Cylindrical source exceptions
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM caustic test questions
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Foucalt testing
- From: Everett Cairns <ecairns@McMail.CIS.McMaster.CA>
- Re: ATM Question about making a Schmidt camera
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Question about making a Schmidt camera
- From: Everett Cairns <ecairns@mcmail.cis.mcmaster.ca>
- Re: ATM Foucalt testing
- From: Everett Cairns <ecairns@mcmail.cis.McMaster.CA>
- ATM Ultra-Light Dob Design Questions
- From: "EXT-Lewis, John R" <John.Lewis4@PSS.Boeing.com>
- ATM Astrosital
- From: "Fabio Falchi" <falchifa@tin.it>
- ATM RE: Little Mirror Man.
- From: "Fearon, Gary" <gary.fearon@wapl.com.au>
- ATM Y2K Beta Report from Australia
- Re: ATM Posting...
- From: "Frank" <thewards@mindspring.com>
- Re: ATM omikron and TDE
- From: "frank" <thewards@mindspring.com>
- Re: ATM Ready for a refractor.
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM Ready for a refractor
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM Scope pictures
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM Scope pictures, lower bandwidth
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM Upper cage
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM Upper cage
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM "collimating" diagonals
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM Upper cage
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM another collimation finding
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM star testing with low power?
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM Star Test??
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM OT: 35MM- Camera
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM OT: Consider the SkyBeam Stopped!
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM PC's and extreme cold, Vol. 2
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM newbie w/questions
- From: "Frank Ward" <thewards@mindspring.com>
- Re: Re ATM A new Discovery - a Brassiere Scope
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Polishing Info - Cerium Oxide, Zirconium Oxide, Submicron Aluminum Oxide - Astrosital.
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Handcrafted Eyepieces
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM How to make a box
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM How to make a box
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM sope
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM How to make a box
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM newbie questions
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM newbie questions
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Polishing
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM In the beginning... there was my first 6" blank.
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM OT/ turning balls on a lathe
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Re: Fiberglass Tubing
- From: "Frank Ward" <thewards@mindspring.com>
- ATM cylendrical K.E.
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Pyrex is o.k. stuff
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Re: stripping coatings
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Re: Newton's Telescope
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Alternative tools?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Alternative tools?
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Little Mirror Man.
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM reflector coatings
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Tool made...
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Initial collimation
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Listen to yourself...
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM - Help finding materials for cassegrain project.??
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Robert M. Edmund interview: Slightly off-topic
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM mak-newt advice
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM The Ideal Camera
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Removing large amounts of glass
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM NEW GRIND METHOD WORKS!
- From: "Frank Ward" <thewards@mindspring.com>
- Re: [Re: ATM NEW GRIND METHOD WORKS!]
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Finder Mounting
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM reply on forward
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATMing in the February S&T
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Screeching while you polish
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Finder Mounting
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Old English Mount
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM tde-tip
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM tde-tip
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM tde-tip
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM omikron and TDE
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Ronchi Test
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Ronchi Test
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM From screeches to scratches
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Observer and extreme cold, Vol. 3
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Collimation is driving me crazy!
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Spider vanes (4 or 3? )Brightness of spikes vs vane thickness
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Mirror shadows
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Wierd mirror mistakes
- From: "Frank Ward" <thewards@mindspring.com>
- Fw: ATM Wierd mirror mistakes
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Grinding Resumed, Cont'd
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM A Very Bad Day
- From: "Frank Ward" <thewards@mindspring.com>
- ATM Mirrors
- From: "Frank Ward" <thewards@mindspring.com>
- Re: ATM Low wind load baffle, & etc
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM spider design
- From: Gary Heiner <glheiner@pacbell.net>
- ATM Chamfer rear of mirror?
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Using Baader Solar filter material
- From: Gary Heiner <glheiner@pacbell.net>
- ATM Chamfer, er, I mean bevel, on blank rear
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Chamfer, er, I mean bevel, on blank rear
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Powering a PC from a 12v battery
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Pyrex is o.k. stuff
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM oven door glass.
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Making Tile tool
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Making Tile tool
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM mak-newt advice
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM The Ideal Camera
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Ahh ! Crack in mirror. Please advise.
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Removing large amounts of glass
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Ahh ! Crack in mirror. Please advise.
- From: Gary Heiner <glheiner@pacbell.net>
- ATM Kitchen Inteferometry- done & up
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Kitchen Inteferometry- done & up
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Kitchen Inteferometry- done & up
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM PC's and extreme cold, Vol. 2
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Spider Diffraction
- From: Gary Heiner <glheiner@pacbell.net>
- Re: ATM Coma Correctors and figuring
- From: "Gary McKenzie" <garymck@ozemail.com.au>
- Re: ATM Suppliers of abrasives
- From: Gary Seronik <gseronik@netway.com>
- ATMing in the February S&T
- From: Gary Seronik <gseronik@netway.com>
- Re: Re ATM Altitude Bearings
- From: Gary Seronik <gseronik@netway.com>
- Re: ATMing in the February S&T
- From: Gary Seronik <gseronik@netway.com>
- ATM Thanks to all
- From: George Anderson <georgea@CAM.ORG>
- ATM OT: Light streak in the sky
- From: George Anderson <georgea@CAM.ORG>
- ATM Binocular Chair
- From: "George F. Pierce" <pierce@rice.edu>
- ATM 12.5" Primary For Sale
- From: "George F. Pierce" <pierce@rice.edu>
- Re: ATM Powering a PC from a 12v battery
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM In the beginning... there was my first 6" blank.
- From: gstacy@premierweb.net (GilbertStacy)
- Re: ATM Barlow + Extension Tube = ?
- From: "Greg Babcock" <gregb@iccom.com>
- Re: ATM - Help finding materials for cassegrain project.??
- RE: ATM LARGE ALUMINUM TUBES
- RE: ATM Buying BK-7
- ATM Orlando Fl. surplus houses
- ATM Re: Ritchey-Chretiens
- ATM front-surface mirrors
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM In the beginning... there was my first 6" blank.
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM Vignetting
- From: Guy de Nooij <G.deNooij@students.geog.uu.nl>
- Re: ATM newbie questions
- From: Harold Suiter <suiterhr@digitalexp.com>
- ATM Need some information on the use of Carbon Fibre for Dobsonian upper tube assembly
- From: "Harry Kambanis" <kambanis@compulink.gr>
- ATM Re: Low eyepiece height
- Re: ATM Re: Portland porthole.
- From: "Howard Banich" <hbanich@teleport.com>
- Re: Re ATM Truss Tubes
- From: Hugues_Laroche@ses-astra.com
- ATM Technical data of the SAA1042
- From: Hugues_Laroche@ses-astra.com
- ATM OK: Technical data of the SAA1042
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Glass Slumping Club
- From: Hugues_Laroche@ses-astra.com
- ATM French (and others?) abrasives
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Unchannelled subdiameter lap works well
- From: Hugues_Laroche@ses-astra.com
- Re: ATM F3 primary ARGHHHHHHHHHHH!
- From: Hugues_Laroche@ses-astra.com
- Re: ATM re: screeching
- From: Hugues_Laroche@ses-astra.com
- RE: ATM re: screeching
- From: Hugues_Laroche@ses-astra.com
- Re: ATM OT/ turning balls on a lathe
- From: "Ian Timshel" <timshel@escape.ca>
- ATM The best mirror cells
- From: "J. Christopher Westland" <westland@ust.hk>
- ATM 35MM- Camera
- ATM Merry Christmas
- ATM Alt. Tool
- ATM TOOL
- ATM TOOL
- Re: ATMing in the February S&T
- From: "James E. Gort" <gort@sonetis.com>
- Re: ATM How to make a box
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM RE making wooden balls
- From: James P Crombie <jpcrombie@islandtelecom.com>
- re: ATM Need some information on the use of Carbon Fibre for Dobsonian upper tube assembly
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM Supplies Alert
- From: James P Crombie <jpcrombie@islandtelecom.com>
- RE: ATM Polishing/figuring advice for a newbie please?
- From: "James W. Burrows" <burrjaw@halcyon.com>
- RE: ATM Polishing/figuring advice for a newbie please?
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Millies-Lacroix analysis of non-paraboloidal surfaces
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Re: Millies-Lacroix analysis of non-paraboloidal surfaces
- From: "James W. Burrows" <burrjaw@halcyon.com>
- ATM Analysis of non-paraboloidal surfaces
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM caustic test questions
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: SV: ATM Foucalt testing
- From: "James W. Burrows" <burrjaw@halcyon.com>
- ATM Posting...
- From: kb7vdw@webtv.net (James Wall)
- ATM Tool...
- From: kb7vdw@webtv.net (James Wall)
- ATM Aluminum Oxide versus Carbide
- From: "Janik Zikovsky" <jzikovsky@hotmail.com>
- Re: ATM Aluminum Oxide versus Carbide
- From: "Janik Zikovsky" <jzikovsky@hotmail.com>
- ATM A Very Bad Day
- From: "Janik Zikovsky" <jzikovsky@hotmail.com>
- Re: ATM A Very Bad Day
- From: "Janik Zikovsky" <jzikovsky@hotmail.com>
- RE: ATM A Very Bad Day
- From: "Janik Zikovsky" <jzikovsky@hotmail.com>
- Re: ATM Linux raytracing software?
- From: "Janik Zikovsky" <jzikovsky@hotmail.com>
- Re: ATM "collimating" diagonals
- From: Jay LeBlanc <jaleblan@dakotacom.net>
- Re: ATM Binocular collimation? part OT
- From: Jay LeBlanc <jaleblan@dakotacom.net>
- Re: ATM PC's and extreme cold, Vol. 2
- From: Jay LeBlanc <jaleblan@dakotacom.net>
- ATM Ahh ! Crack in mirror. Please advise
- From: "Jean-Denis Bertron" <jd_bertron@hotmail.com>
- Re: ATM Re: Millies-Lacroix analysis of non-paraboloidal surfaces
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- ATM 3 blobs enough?
- From: Jeff <jeffr@phonetech.com>
- Re: ATM caustic calculations
- From: "Jeff Baldwin" <bald@gotnet.net>
- ATM pain
- From: "Jeff Baldwin" <bald@gotnet.net>
- ATM NEW GRIND METHOD WORKS!
- From: Jerremy Baterson <jdbaterson@usa.net>
- Re: [Re: ATM NEW GRIND METHOD WORKS!]
- From: Jerremy Baterson <jdbaterson@usa.net>
- ATM reply on forward
- From: Jerremy Baterson <jdbaterson@usa.net>
- ATM GENERIC ANSWERS TO QUERIES
- From: Jerremy Baterson <jdbaterson@usa.net>
- ATM Apologies a+b+c &Business
- From: Jerremy Baterson <jdbaterson@usa.net>
- ATM Polishing
- From: jdo348@earthlink.net (Jerry Dove)
- Re: ATM Subdiameter pitch lap
- From: jdo348@earthlink.net (Jerry Dove)
- Re: ATM Re: Mock dovetails
- From: jdo348@earthlink.net (Jerry Dove)
- Re: ATM Re: Mock dovetails
- From: jdo348@earthlink.net (Jerry Dove)
- Re: ATM Alternative tools?
- From: jdo348@earthlink.net (Jerry Dove)
- Re: ATM F3 primary ARGHHHHHHHHHHH!
- From: jdo348@earthlink.net (Jerry Dove)
- Re: ATM Grinding a 16 inch plate
- From: jdo348@earthlink.net (Jerry Dove)
- Re: ATM What quality of flat do I need :--
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM Polishing Info - Cerium Oxide, Zirconium Oxide, Submicron Aluminum Oxide - Astrosital.
- From: Jim Fitch <jf@arn.net>
- Re: ATM In the beginning... there was my first 6" blank.
- From: Jim Fitch <jf@arn.net>
- Re: ATM Little Mirror Man.
- From: Jim Fitch <jf@arn.net>
- Re: ATM strain in commercial pyrex resulting in unexpected astigmatism
- From: Jim Fitch <jf@arn.net>
- Re: ATM Finder Mounting
- From: Jim Fitch <jf@arn.net>
- Re: ATM Re: Strain in commercial Pyrex
- From: Jim Fitch <jf@arn.net>
- Re: ATM NEWT
- From: "Jim Fly" <flyj@iol-12.net>
- Re: ATM inside the secondary cage
- From: "Jim Fly" <flyj@iol-12.net>
- Re: ATM inside the secondary cage
- From: "Jim Fly" <flyj@iol-12.net>
- Re: ATM inside the secondary cage
- From: "Jim Fly" <flyj@iol-12.net>
- ATM Fw: mirror segments
- From: "Jim Fly" <flyj@iol-12.net>
- Re: ATM Ot - weird attachments?
- From: Jim McKay <james.mckay@yale.edu>
- Re: ATM Powering a PC from a 12v battery
- From: Jimmy La Fountain <lafountainj@sprintmail.com>
- ATM Hockey Pucks
- From: Jimmy La Fountain <lafountainj@sprintmail.com>
- RE:ATM Mirror Cleaning
- From: Jimmy La Fountain <lafountainj@sprintmail.com>
- ATM W32.NewApt.Worm
- From: Jimmy La Fountain <lafountainj@sprintmail.com>
- ATM Units (again!)
- From: Jmkasunich@ra.rockwell.com
- ATM Galaxy Quest!
- From: Joe Campbell <joe@esper.com>
- ATM Re: finished primary mirrors
- From: Joe Campbell <joe@esper.com>
- ATM mel's drive
- From: "johan" <johan@feronyl.com>
- ATM e-mail of Mel Bartels
- From: "johan" <johan@feronyl.com>
- ATM Fw: Undeliverable Mail
- From: "johan" <johan@feronyl.com>
- Re: ATM Old English Mount
- From: "John Anderson" <anderiii@mindspring.com>
- ATM sorry
- From: "John Anderson" <anderiii@mindspring.com>
- Re: ATM newbie w/questions
- From: John Dykins <dykins@sas.upenn.edu>
- Re: ATM diffusion pumps
- From: John Dykins <dykins@sas.upenn.edu>
- RE: ATM sope
- From: John Dykins <dykins@sas.upenn.edu>
- RE: ATM Re: Newton's Telescope
- From: John Dykins <dykins@sas.upenn.edu>
- Re: ATMing in the February S&T
- From: John Dykins <dykins@sas.upenn.edu>
- ATM Re: Turning Spheres
- From: "John Holland" <yojohn@vci.net>
- Re: ATM OT - weird messages - follow up
- From: "John Holland" <yojohn@vci.net>
- ATM Robert M. Edmund interview: Slightly off-topic
- From: "John Lynch" <john_p_lynch@hotmail.com>
- ATM Wrinkle finish paint
- From: "John Lynch" <john_p_lynch@hotmail.com>
- Re: ATM Mirror grinding resumed
- From: John Price <jmprice@cbvcp.com>
- ATM Removing Teflon Etch?
- From: John Veazey <veazey@ridgenet.net>
- Re: ATM NEWT
- From: John Veazey <veazey@ridgenet.net>
- Re: ATM Wierd mirror mistakes
- From: John Vogt <atmer@idt.net>
- Re: ATM newbie questions
- From: "Jon B. Cooper" <jbcooper@gte.net>
- Re: ATM Ahh ! Crack in mirror. Please advise.
- From: "Jon B. Cooper" <jbcooper@gte.net>
- RE: ATM Ahh ! Crack in mirror. Please advise.
- From: "Jon Cooper" <jbcooper@gte.net>
- ATM new web page
- From: "Jonathan P. Dietrich" <jpdietrich@flash1.flashmail.com>
- ATM Irrigation Tube Irregularities?
- From: Jonathan Tomshine <jshine@millcomm.com>
- ATM ZEMAX 9.0 has Foucault knife edge testing option
- From: "Jones, Michael I" <michael.i.jones@lmco.com>
- RE: ATM ZEMAX 9.0 has Foucault knife edge testing option
- From: "Jones, Michael I" <michael.i.jones@lmco.com>
- RE: ATM Ready for a refractor.
- From: "Jones, Michael I" <michael.i.jones@lmco.com>
- RE: ATM ZEMAX 9.0 has Foucault knife edge testing option
- From: "Jones, Michael I" <michael.i.jones@lmco.com>
- ATM Cylindrical lens/mirror for KE test? Not without a diffuser!
- From: "Jones, Michael I" <michael.i.jones@lmco.com>
- ATM Cylindrical source exceptions
- From: "Jones, Michael I" <michael.i.jones@lmco.com>
- ATM mirror segment
- From: Jose Albino <jalbino@way.com.ar>
- Re: ATM Binocular collimation? part OT
- From: "Joseph O'Neil" <joneil@multiboard.com>
- ATM Ot - weird attachments?
- From: "Joseph O'Neil" <joneil@multiboard.com>
- ATM OT - weird messages - follow up
- From: "Joseph O'Neil" <joneil@multiboard.com>
- Re: Re ATM Altitude Bearings
- From: "Joseph O'Neil" <joneil@multiboard.com>
- ATM darkness inside an OTA
- From: "Joseph O'Neil" <joneil@multiboard.com>
- Re: ATM Wierd mirror mistakes
- From: jroweapp@swbell.net
- Re: ATM Spider diffraction - spike intensity & length
- From: jroweapp@swbell.net
- ATM Sky search light precedent
- From: jherrero@videotron.ca (Juan Herrero)
- Re: ATM Sky search light precedent
- From: jherrero@videotron.ca (Juan Herrero)
- ATM Great improvement to AltAz in latest upgrade !
- From: jherrero@videotron.ca (Juan Herrero)
- ATM A super accurate way to measure microsteps
- From: jherrero@videotron.ca (Juan Herrero)
- ATM Super unit conversion program !
- From: jherrero@videotron.ca (Juan Herrero)
- Re: ATM PC's and extreme cold, Vol. 2
- From: jherrero@videotron.ca (Juan Herrero)
- ATM Observer and extreme cold, Vol. 3
- From: jherrero@videotron.ca (Juan Herrero)
- ATM Question about making a Schmidt camera
- From: kai <u861713@oz.nthu.edu.tw>
- Re: ATM In the beginning... there was my first 6" blank.
- From: Ken Hunter <atm_ken_hunter@yahoo.com>
- Re: ATM Technical data of the SAA1042
- From: Ken Hunter <atm_ken_hunter@yahoo.com>
- Fwd: Re: ATM Technical data of the SAA1042
- From: Ken Hunter <atm_ken_hunter@yahoo.com>
- ATM Full Moon Madness
- From: Ken Hunter <atm_ken_hunter@yahoo.com>
- RE: ATM Powering a PC from a 12v battery
- From: Ken Hunter <atm_ken_hunter@yahoo.com>
- Fwd: Re: ATM Powering a PC from a 12v battery
- From: Ken Hunter <atm_ken_hunter@yahoo.com>
- Re: ATMing in the February S&T
- From: Ken Hunter <atm_ken_hunter@yahoo.com>
- Re: ATM 4 tubes truss structure questions...
- From: Ken Hunter <atm_ken_hunter@yahoo.com>
- Re: ATM 4 tubes truss structure questions...
- From: Ken Hunter <atm_ken_hunter@yahoo.com>
- Re: ATM Making Tile tool
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Tool made...
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Initial collimation
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Powering a PC from a 12v battery
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM oven door glass.
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Powering a PC from a 12v battery
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: SV: ATM Millies-Lacroix analysis of non-paraboloidal surfaces
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Powering a PC from a 12v battery
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM F3 primary ARGHHHHHHHHHHH!
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM NEW GRIND METHOD WORKS!
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Ahh ! Crack in mirror. Please advise.
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Ronchi Test
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM PC's and extreme cold, Vol. 2
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM PC's and extreme cold, Vol. 2
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM From screeches to scratches
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Collimation is driving me crazy!
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Finished Primary Mirror
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Collimation is driving me crazy!
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Alt. Tool
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Wierd mirror mistakes
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM 10 inch f5.6 Polishing
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM sagitta clarification
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Grinding Resumed, Cont'd
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM A Very Bad Day
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM TOOL
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM Polishing Begins
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM polishing temperature question.
- From: Ken Lowther <lowther@worldnet.att.net>
- ATM url's neeced
- From: Ken Lowther <lowther@worldnet.att.net>
- Re: ATM oil slick on mirror
- From: Ken Lowther <lowther@worldnet.att.net>
- ATM Oiled,autocollimated achromats
- From: "Klaas Honders" <k.honders@worldonline.nl>
- ATM immersion oil
- From: "Klaas Honders" <k.honders@worldonline.nl>
- ATM tde-tip
- From: "Klaas Honders" <k.honders@worldonline.nl>
- Re: ATM tde-tip
- From: "Klaas Honders" <k.honders@worldonline.nl>
- ATM omikron
- From: "Klaas Honders" <k.honders@worldonline.nl>
- ATM TDE
- From: "Klaas Honders" <k.honders@worldonline.nl>
- ATM Glass Slumping Club
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM OT/ turning balls on a lathe
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM reflector coatings
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM Telescope/Optics Workshop March 2000
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM focusing/aerial image/ideal camera
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM Mak/Newts, classes
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM aerial camera lens
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM ?
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM WANTED: GRINDING TOOL AND GRIT
- From: lbblair1@yahoo.com (Larry Blair)
- RE: ATM OT/ turning balls on a lathe
- From: "Launie, Kenneth J" <LAUNIEK@POLAROID.COM>
- RE: ATM Newton's first Newt
- From: "Launie, Kenneth J" <LAUNIEK@POLAROID.COM>
- ATM Barlow + Extension Tube = ?
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Barlow? : Is my thinking correct?
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Linux raytracing software?
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM Chamfer, er, I mean bevel, on blank rear
- From: les <lesh@frii.com>
- Re: ATM RE: Making "Balls"
- From: lesh <lesh@frii.com>
- Re: ATM Suppliers of abrasives
- From: lesh <lesh@frii.com>
- Re: ATM Making Tile tool
- From: lesh <lesh@frii.com>
- Re: ATM Powering a PC from a 12v battery
- From: lesh <lesh@frii.com>
- Re: ATM F3 primary ARGHHHHHHHHHHH!
- From: lesh <lesh@frii.com>
- Re: ATM Re: Consider the SkyBeam Stopped!
- From: "Loren A. Busch" <LBusch@ix.netcom.com>
- DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
- From: Mail System Internal Data <MAILER-DAEMON@system.umsystem.edu>
- ATM What quality of flat do I need :--
- From: Malcolm <malcolm@homebrewer.freeisp.co.uk>
- Re: ATM What quality of flat do I need :--
- From: Malcolm <malcolm@homebrewer.freeisp.co.uk>
- Re: ATM Recent Experiences in Glass Pushing
- From: Malcolm Macdonald <toliman@wave.co.nz>
- RE: ATM inside the secondary cage
- From: "Malyj, George" <gjmalyj@ucdavis.edu>
- ATM OT:Bigger isn't always better ...
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- Re: ATM need a barlow lens?
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- Re: ATM inside the secondary cage
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- Re: ATM Irrigation Tube Irregularities?
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- Re: ATMing in the February S&T
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- Re: ATMing in the February S&T
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- ATM Cassegrain calculator - JavaScripted version
- ATM Cassegrain calculator
- ATM Re: Newton's Telescope
- From: "Matt Tarlach" <matttarlach@jps.net>
- ATM Al tubes: end rolling and wall thickness; was: Irrigation Tube Irregularities?
- From: "Matt Tarlach" <matttarlach@jps.net>
- Re: ATM Ronchi Test
- Re: ATM
- Re: ATM field size
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Important SAA1042 information
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM MC3479/ECG1859 replace SAA1042
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Mel's Dob Driver Circut - TIP120 options
- From: Mel Bartels <mbartels@efn.org>
- ATM ? about interpreting thickness
- From: Mel Bartels <mbartels@efn.org>
- ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [Chip <ebainesNOSPAM@worldnet.att.net>]]
- From: Mel Bartels <mbartels@efn.org>
- Re: SV: ATM Millies-Lacroix analysis of non-paraboloidal surfaces
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Millies-Lacroix analysis of non-paraboloidal surfaces
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM newt. focuser baffel
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM F3 primary ARGHHHHHHHHHHH!
- From: Mel Bartels <mbartels@efn.org>
- ATM new contributed software
- From: Mel Bartels <mbartels@efn.org>
- ATM strain in commercial pyrex resulting in unexpected astigmatism
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM What does strain look like, anyway?
- From: Mel Bartels <mbartels@efn.org>
- ATM msg from list owner
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM GENERIC ANSWERS TO QUERIES
- From: Mel Bartels <mbartels@efn.org>
- ATM Re: OT - weird messages - follow up
- From: mel bartels <mbartels@efn.org>
- Re: ATM Screeching while you polish
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Apologies a+b+c &Business
- From: mel bartels <mbartels@efn.org>
- Re: ATMing in the February S&T
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Old English Mount
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Donations to Iran
- From: Mel Bartels <mbartels@efn.org>
- ATM welcome to atm list
- From: Mel Bartels <mbartels@efn.org>
- ATM welcome to atm list
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM PC's and extreme cold, Vol. 2
- From: Mel Bartels <mbartels@efn.org>
- ATM [Fwd: warm clothes, pro astronomers
- From: Mel Bartels <mbartels@efn.org>
- ATM [Fwd: BOUNCE atm@shore.net: 3 4 spider vanes
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Spider vanes (4 or 3? ) Brightness of spikes vs vane thickness
- From: mel bartels <mbartels@efn.org>
- Re: ATM Aluminum Oxide versus Carbide
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM 10 inch f5.6 Polishing
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM sagitta clarification
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Spider diffraction - spike intensity & length
- From: Mel Bartels <mbartels@efn.org>
- ATM Re:
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Spider Diffraction
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Friction roller gearbox ... it works!!
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM A Very Bad Day
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM A Very Bad Day
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM FIND..PLATE GLASS,thx MIKE
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM FIND..PLATE GLASS,thx MIKE
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Polishing Info - Cerium Oxide, Zirconium Oxide, SubmicronAluminum Oxide - Astrosital.
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM newbie w/questions
- From: Michael Lindner <mikel@att.net>
- ATM How to make a box
- From: Michael Lindner <mikel@att.net>
- Re: ATM Seattle area: stop the SkyBeam
- From: Michael Lindner <mikel@att.net>
- Re: ATM newbie questions
- From: Michael Lindner <mikel@att.net>
- Re: ATM In the beginning... there was my first 6" blank.
- From: Michael Lindner <mikel@att.net>
- ATM Using Baader Solar filter material
- From: Michael Lindner <mikel@att.net>
- Re: ATM - Help finding materials for cassegrain project.??
- From: Michael Lindner <mikel@att.net>
- Re: ATM clearskies.org
- From: Michael Lindner <mikel@att.net>
- Re: ATM Re: Millies-Lacroix analysis of non-paraboloidal surfaces
- From: Michael Lindner <mikel@att.net>
- Re: ATM info on linux/BSD telescope programming
- From: Michael Lindner <mikel@att.net>
- Re: ATM Thread pitch of eyepiece.
- From: Michael Lindner <mikel@att.net>
- Re: ATM Re: Low eyepiece height
- From: Michael Lindner <mikel@att.net>
- Re: ATM dumb spider question
- From: Michael Lindner <mikel@att.net>
- Re: ATM Millies-Lacroix analysis of non-paraboloidal surfaces
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM mak-newt advice
- From: Michael Peck <mpeck1@ix.netcom.com>
- ATM Mime-Version: 1.0
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Analysis of non-paraboloidal surfaces
- From: Michael Peck <mpeck1@ix.netcom.com>
- ATM Re: Foucault testing
- From: Michael Peck <mpeck1@ix.netcom.com>
- ATM A semi-automated Foucault test
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Tri-Sheifspigler
- From: Michael Peck <mpeck1@ix.netcom.com>
- ATM Orion Skyview Deluxe Eq. Mount
- From: "Michael Pendley" <mycall@sandia.gov>
- Re: ATM Polishing Info - Cerium Oxide, Zirconium Oxide, Submicron Aluminum Oxide - Astrosital.
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM sope
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Re: Newton's Telescope
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM: stripping coatings
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM: stripping coatings
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Alternative tools?
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Initial collimation
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Robert M. Edmund interview: Slightly off-topic
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Making tool
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Re: Consider the SkyBeam Stopped!
- From: Mike Coslo <mjc5@psu.edu>
- ATM Removing large amounts of glass
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Removing large amounts of glass
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM NEW GRIND METHOD WORKS!
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM NEW GRIND METHOD WORKS!
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Power Inverters - Recommendations/Issues
- From: Mike Coslo <mjc5@psu.edu>
- Re: Re ATM Altitude Bearings
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATMing in the February S&T
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATMing in the February S&T
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATMing in the February S&T
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM dumb spider question
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM TOOL
- From: Mike Coslo <mjc5@psu.edu>
- ATM In the beginning... there was my first 6" blank.
- From: "Mike Krauss" <mike@pctestlab.com>
- RE: ATM Powering a PC from a 12v battery
- From: "Mike Krauss" <mike@pctestlab.com>
- ATM RE: How to make a box
- From: Mike Reed <mreed@eai.com>
- Re: ATM Newtonian vs Unobstructed Newtonian
- From: Mike Reed <mreed@eai.com>
- ATM Star Test??
- From: "Mountaineer Aviation Ltd" <bdolha@uniserve.com>
- ATM Newtonian vs Unobstructed Newtonian
- From: "Mountaineer Aviation Ltd" <bdolha@uniserve.com>
- young ATM project
- From: mrphil <pmeuse@capecod.net>
- Re: ATM 35MM- Camera
- Re: Lens for finderscope (was RE: ATM Finder Mounting)
- Re: ATM Suprax - Low expansion Glass?
- From: nicholas@kinabalu.freeserve.co.uk
- Re: ATM Laser Collimation /Focuser Question
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM "collimating" diagonals
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM ? post
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM spider design
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Cylindrical lens/mirror for KE test? Not without a diffuser!
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Initial collimation
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Vignetting
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Cylindrical source exceptions
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Millies-Lacroix analysis of non-paraboloidal surfaces
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Millies-Lacroix analysis of non-paraboloidal surfaces
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM newt. focuser baffel
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATMing in the February S&T
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Finder Mounting
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Finder Mounting
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Foucalt testing
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Foucalt testing
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Spider vanes (4 or 3?)
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Foucalt testing
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Collimation is driving me crazy!
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Collimation is driving me crazy!
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Collimation is driving me crazy! ERRATUM
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Spider vanes (4 or 3? )Brightness of spikes vs vane thickness
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM brownie camera and a telescope...
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM What quality of flat do I need :--
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Spider Diffraction
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- ATM - Help finding materials for cassegrain project.??
- From: "Noesgaard,Ken" <Ken.Noesgaard@siemens.ca>
- Re: SV: ATM Millies-Lacroix analysis of non-paraboloidal surfaces
- From: "Noesgaard,Ken" <Ken.Noesgaard@siemens.ca>
- RE: ATM Finder Mounting
- From: "Owen, David S, GRWMK" <dowen0@att.com>
- Re: ATM Donations to Iran
- From: owl1 <owl1@mail.ptd.net>
- Re: ATM Units (again!)
- From: Paul Cousoulis <paulcsouls@worldnet.att.net>
- ATM Finder Mounting
- From: Paul Cousoulis <paulcsouls@worldnet.att.net>
- Re: ATM Finder Mounting
- From: Paul Cousoulis <paulcsouls@worldnet.att.net>
- Re: ATM Finder Mounting
- From: Paul Cousoulis <paulcsouls@worldnet.att.net>
- Re: ATM Finder Mounting
- From: Paul Cousoulis <paulcsouls@worldnet.att.net>
- Re: ATM Finder Mounting
- From: Paul Cousoulis <paulcsouls@worldnet.att.net>
- RE: ATM newbie w/questions
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM How to make a box
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM How to make a box
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM Need some information on the use of Carbon Fibre for Dobsonian upper tube assembly
- From: Paul LeFevre <paull@lucasarts.com>
- ATM Re: atm-digest V1 #1898
- ATM Olympus OM-1
- ATM Re: atm-digest V1 #1917
- Re: ATM Astrosital
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM newbie w/questions
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Suprax - Low Expansion Glass
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Source of Truss Tubes in the UK
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM OT/ turning balls on a lathe
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM OT/ turning balls on a lathe
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Technical data of the SAA1042
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Newbie Grinding Stand
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- ATM Re: Mock dovetails
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Binocular viewer from a kit - initial impressions
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Alternative tools?
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Alternative tools?
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM 35MM- Camera
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Chamfer, er, I mean bevel, on blank rear
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM - Help finding materials for cassegrain project.??
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM LARGE ALUMINUM TUBES
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Grinding / Polishing Supplies
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Units (again!)
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM The Ideal Camera
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM RE: loaf o' glass
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Powering a PC from a 12v battery
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Powering a PC from a 12v battery
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM The Ideal Camera
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM NEW GRIND METHOD WORKS!
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Focusing Motor Digital Readout
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM list spam (OT)
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Apologies a+b+c &Business
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM From screeches to scratches
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Mirror grinding resumed
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Wrinkle finish paint
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Wierd mirror mistakes
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- ATM: sources for goodies
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Dew Heater for primary mirror
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Linux raytracing software?
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM linix raytrace was: url's neeced
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- RE: ATM How to make a box
- From: "Peter Dean" <peter.dean@cableol.co.uk>
- Re: ATM LARGE ALUMINUM TUBES
- From: notpete@scn.org (Peter Hirtle)
- Re: ATM Newtonian vs Unobstructed Newtonian
- From: notpete@scn.org (Peter Hirtle)
- Re: ATM overcorrecting for coating
- From: notpete@scn.org (Peter Hirtle)
- RE: ATM Ready for a refractor.
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- ATM Re: designing a refractor
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- ATM Re: An old-fashion singlet refractor project, Part 2
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- ATM VAT was Newton's Telescope
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM ? about interpreting thickness
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM Cylindrical source exceptions
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- ATM Re: Ball/plate analysis
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATMing in the February S&T
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re ATM Truss Tubes
- From: "Peter Jones" <pmjco@email.msn.com>
- Re ATM A new Discovery - a Brassiere Scope
- From: "Peter Jones" <pmjco@email.msn.com>
- Re ATM Truss Tubes in UK
- From: "Peter Jones" <pmjco@email.msn.com>
- Re ATM Electric Morors
- From: "Peter Jones" <pmjco@email.msn.com>
- Re ATM Altitude Bearings
- From: "Peter Jones" <pmjco@email.msn.com>
- Re: Re ATM Altitude Bearings
- From: "Peter Jones" <pmjco@email.msn.com>
- ATM Suprax - Low expansion Glass?
- From: "Philip Lardner" <philip_lardner@connect.ie>
- RE: ATM Suprax - Low expansion Glass?
- From: "Philip Lardner" <philip_lardner@connect.ie>
- ATM Powering a PC from a 12v battery
- From: "Philip Lardner" <philip_lardner@connect.ie>
- RE: ATM Powering a PC from a 12v battery
- From: "Philip Lardner" <philip_lardner@connect.ie>
- ATM Old English Mount
- From: "Phillip Smith" <hapchap@bigpond.com>
- Re: ATM List, Old English Mount
- From: "Phillip Smith" <hapchap@bigpond.com>
- Re: ATM Re: Millies-Lacroix analysis of non-paraboloidal surfaces
- From: "R. Torsten Clay" <torsten@mephisto.physics.uiuc.edu>
- ATM strain in commercial pyrex
- From: dosc@CSWNET.COM (Raymond A. Desmarais Jr.)
- ATM What does strain look like, anyway?
- Re: ATM OT/ turning balls on a lathe
- From: Reed Alan Spaulding <shellac@together.net>
- ATM Newton's telescope
- From: Reed Alan Spaulding <shellac@together.net>
- Re: ATM OT/ turning balls on a lathe
- From: Reed Alan Spaulding <shellac@together.net>
- ATM Initial collimation
- From: Reed Alan Spaulding <shellac@together.net>
- ATM F3 primary ARGHHHHHHHHHHH!
- From: Reed Alan Spaulding <shellac@together.net>
- ATM Idea: How to make a precurved steel tool
- From: Reed Alan Spaulding <shellac@together.net>
- ATM Tri-Sheifspigler
- From: Reed Alan Spaulding <shellac@together.net>
- Re: ATM Vignetting
- From: Regis Krug <regis_krug@mentorg.com>
- Re: ATM newbie w/questions
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Recent Experiences in Glass Pushing
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM More Refractor Madness (astigmatism)
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Polishing Begins
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- ATM Quickcam for interferometers?
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- ATM Re: Newton's Telescope
- From: Richard Ozer <rozer@ois-online.com>
- RE: ATM Re: Newton's Telescope
- From: Richard Ozer <rozer@ois-online.com>
- RE: ATM LARGE ALUMINUM TUBES
- From: Richard Ozer <rozer@ois-online.com>
- RE: ATM Irrigation Tube Irregularities?
- From: Richard Ozer <rozer@ois-online.com>
- RE: ATM Al tubes: end rolling and wall thickness; was: Irrigation Tube Irregularities?
- From: Richard Ozer <rozer@ois-online.com>
- RE: ATM Collimation is driving me crazy!
- From: Richard Ozer <rozer@ois-online.com>
- ATM Cross Hairs for Sale
- From: Richard Schwartz <richas@idt.net>
- ATM Top 10
- From: Richard Schwartz <richas@idt.net>
- ATM Newbie Grinding Stand
- From: Richard Schwartz <richas@idt.net>
- ATM Focal Length?
- From: Richard Schwartz <richas@idt.net>
- ATM The Ideal Camera
- From: Richard Schwartz <richas@idt.net>
- Re: ATM ? about interpreting thickness
- From: Rick Scott <rmscott@home.com>
- ATM WANTED: GRINDING TOOL AND GRIT
- From: "Rob Simmons" <biofish@cdc.net>
- ATM Re: atm-digest V1 #1896
- From: "Rob Simmons" <biofish@cdc.net>
- ATM need a barlow lens?
- From: "Rob Simmons" <biofish@cdc.net>
- ATM Grinding a 16 inch plate
- From: "Rob Simmons" <biofish@cdc.net>
- ATM what a way to bring in the holidays.
- From: "Rob Simmons" <biofish@cdc.net>
- Re: ATM what a way to bring in the holidays.
- From: "Rob Simmons" <biofish@cdc.net>
- My christmas wishlist for ATM
- From: "Rob Simmons" <biofish@cdc.net>
- Re: ATM Ronchi Test
- From: "Rob Simmons" <biofish@cdc.net>
- Re: ATM Re: Low eyepiece height
- From: Rob Teeter <webuser@thecore.com>
- Re: ATM Oblate Spheriod question
- From: "robert allen" <rallen@iland.net>
- ATM Grinding / Polishing Supplies
- From: Robert Norgard <rnorgard@gci.net>
- ATM Mirror grinding resumed
- From: Robert Norgard <rnorgard@gci.net>
- ATM Grinding Resumed, Cont'd
- From: Robert Norgard <rnorgard@gci.net>
- ATM Polishing Begins
- From: Robert Norgard <rnorgard@gci.net>
- Re: ATM Upper cage
- From: "Roger A. Phillips" <mailman@localline.com>
- ATM Recent Experiences in Glass Pushing
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Newton's first Newt
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Re: atm-digest V1 #1897
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Pyrex is o.k. stuff
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM 8" achromat (another update)
- From: Roger Ceragioli <rogerc@dakotacom.net>
- Re:ATM 8" achromat (another update)
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Oil Spacing an Objective (long post)
- From: Roger Ceragioli <rogerc@dakotacom.net>
- Re: ATM Oil Spacing an Objective (long post)
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM More Refractor Madness (astigmatism)
- From: Roger Ceragioli <rogerc@dakotacom.net>
- Re: ATM More Refractor Madness (astigmatism)
- From: Roger Ceragioli <rogerc@dakotacom.net>
- Re: ATM Oil Spacing an Objective (long post)
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Buying BK-7
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Re: atm-digest V1 #1906
- From: Roger Ceragioli <rogerc@dakotacom.net>
- RE: ATM Buying BK-7
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM RE: loaf o' glass
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM RE: loaf o' glass
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Ritchey-Chretiens
- From: Roger Ceragioli <rogerc@dakotacom.net>
- RE: ATM strain in commercial pyrex
- From: Roger Ceragioli <rogerc@dakotacom.net>
- Re: ATM Ahh ! Crack in mirror. Please advise.
- From: Roger Ceragioli <rogerc@dakotacom.net>
- re: ATM OT - weird messages - follow up
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM re: screeching
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM RE: A Polishing Machine Built for Two?
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM An Edmund "Flat"
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM A Beral Coating
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Re: atm-digest V1 #1905
- From: "Roger Davis" <batsc@netspace.net.au>
- Re: ATM 35MM- Camera
- From: Roger Groom <rog@omen.com.au>
- Re: ATM Ready for a refractor.
- From: Roger West <westr@mail.nsuok.edu>
- Re: ATM Ready for a refractor.
- From: Roger West <westr@mail.nsuok.edu>
- Re: ATM Newton's telescope
- From: "Ron Dyvig" <rondyv@gwtc.net>
- Re: ATM Re: Newton's Telescope
- From: "Ron Dyvig" <rondyv@gwtc.net>
- Re: ATM Re: Newton's Telescope
- From: "Ron Dyvig" <rondyv@gwtc.net>
- Re: ATM Re: Newton's Telescope
- From: "Ron Dyvig" <rondyv@gwtc.net>
- Re: ATM Re: Newton's Telescope
- From: "Ron Dyvig" <rondyv@gwtc.net>
- ATM clearskies.org
- From: Ron Forrester <rjf@zero-ping.com>
- Re: ATM Laser Collimation /Focuser Question
- From: "Ron Newman" <ronaldn@ptd.net>
- AW: ATM conversion: Ra & Dec to alt/az
- From: "Royston, Jeremy" <jroyston@europe.dg.com>
- ATM Amplifier for photodiodes
- From: "Royston, Jeremy" <jroyston@europe.dg.com>
- AW: ATM mak-newt advice
- From: "Royston, Jeremy" <jroyston@europe.dg.com>
- ATM 10 inch f5.6 Polishing
- From: Ryan Hess <atmryan@excite.com>
- Re: ATM A Very Bad Day
- From: Ryan Hess <atmryan@excite.com>
- ATM I'm polishing... again
- From: Ryan Hess <atmryan@excite.com>
- Re: ATM polishing temperature question.
- From: Ryan Hess <atmryan@excite.com>
- ATM Ready for a refractor.
- From: "Sam Michael" <samm@idcomm.com>
- ATM Polishing Info - Cerium Oxide, Zirconium Oxide, Submicron Aluminum Oxide - Astrosital.
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM Astrosital Polishing
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM Mel's ronchi program
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM OT/ turning balls on a lathe
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM OT/ turning balls on a lathe
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM Suppliers of abrasives
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM: stripping coatings
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM Powering a PC from a 12v battery
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM Powering a PC from a 12v battery
- From: "Sam Michael" <samm@idcomm.com>
- ATM Thread pitch of eyepiece.
- From: "Sam Michael" <samm@idcomm.com>
- ATM 16" mirror
- From: "Sam Orawski" <orawski@lara.on.ca>
- ATM re :donations to Iran
- From: "Sam Orawski" <orawski@lara.on.ca>
- Re: ATM Wierd mirror mistakes
- From: "Sam Orawski" <orawski@lara.on.ca>
- Re: ATM Wierd mirror mistakes
- From: "Sam Orawski" <orawski@lara.on.ca>
- Re: ATM 10 inch f5.6 Polishing
- From: "Sam Orawski" <orawski@lara.on.ca>
- ATM Atm Re: 10" f5.6 polishing
- From: "Sam Orawski" <orawski@lara.on.ca>
- ATM Pitch imprint
- From: "Sam Orawski" <orawski@lara.on.ca>
- Re: ATM Dob mount motion
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Binocular viewer from a kit - initial impressions / Home MadeBino-viewer?
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Robert M. Edmund interview: Slightly off-topic
- From: ScifiGuy <scifiguy@pacbell.net>
- ATM Re: Newton's Telescope
- From: scott.barrie@CIMtegration.COM (Scott Barrie)
- Re: ATM 35MM- Camera
- From: scott.barrie@CIMtegration.COM (Scott Barrie)
- Re: ATM 35MM- Camera
- From: scott.barrie@CIMtegration.COM (Scott Barrie)
- ATM newbie w/questions
- From: "Scott Neuman" <scott_neuman@hotmail.com>
- ATM Re: newbie w/questions
- From: "Scott Neuman" <scott_neuman@hotmail.com>
- ATM inside the secondary cage
- From: "Scott Neuman" <scott_neuman@hotmail.com>
- Re: ATM inside the secondary cage
- From: "Scott Neuman" <scott_neuman@hotmail.com>
- Re: ATM Robert M. Edmund interview: Slightly off-topic
- From: "Scott Neuman" <scott_neuman@hotmail.com>
- ATM N-2 gears up for first light
- From: "Scott Neuman" <scott_neuman@hotmail.com>
- Re: ATM Handcrafted Eyepieces
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- Re: ATM Powering a PC from a 12v battery
- From: Shawn Mitchell <smitchel@ap.stmarys.ca>
- ATM Date: Tue, 7 Dec 1999 15:48:44 -0500
- From: "Shope, Todd -Systems" <todd.shope@ssc.de.ittind.com>
- ATM ? post
- From: "Shope, Todd -Systems" <todd.shope@ssc.de.ittind.com>
- RE: ATM ? post
- From: "Shope, Todd -Systems" <todd.shope@ssc.de.ittind.com>
- ATM Looking for mirror vendors
- From: "Shope, Todd -Systems" <todd.shope@ssc.de.ittind.com>
- ATM RE: Making "Balls"
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM Image analysis for CCD testers
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM RE: Image analysis for CCD testers LINK
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM RE: Image analysis for CCD testers, LINK
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM RE: Image analysis for CCD testers
- From: "Sidor . Kurt" <KSidor@drc.com>
- Re: ATM PC's and extreme cold, Vol. 2
- From: "Simon Vrdoljak" <simon@syd.comcen.com.au>
- ATM J&B Weld!
- From: starlord@QNET.COM (Slc.Dennis Bishop)
- Re: RE: ATM sope
- From: starlord@QNET.COM (Slc.Dennis Bishop)
- ATM Tester?
- From: starlord@QNET.COM (Slc.Dennis Bishop)
- Re: ATM The Ideal Camera
- From: starlord@QNET.COM (Slc.Dennis Bishop)
- ATM [Astronomy-net] Response to "off-topic"
- From: starlord@QNET.COM (Slc.Dennis Bishop)
- ATM rebuilding
- From: starlord@QNET.COM (Slc.Dennis Bishop)
- ATM ?
- From: starlord@QNET.COM (Slc.Dennis Bishop)
- Re: ATM Focal Length?
- From: "sobe" <sobe@effectnet.com>
- Re: ATMing in the February S&T
- From: "sobe" <sobe@effectnet.com>
- ATM sagitta clarification
- From: "sobe" <sobe@effectnet.com>
- Re: ATM newbie w/questions
- From: "Stanley A. Gorodenski" <stanlep@gateway.net>
- RE: ATM Coma Correctors and figuring
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- RE: ATM How to make a box
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- RE: ATM Removing Teflon Etch?
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- RE: ATM sope
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- RE: RE: ATM sope
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- RE: RE: ATM sope
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- ATM Homemade Collimator Upgrade.
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- RE: ATM Laser Collimation /Focuser Question
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- RE: ATM RE: Little Mirror Man.
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- RE: ATM OT/ turning balls on a lathe
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- RE: ATM OT/ turning balls on a lathe
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- RE: ATM Newbie Grinding Stand
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- RE: ATM In the beginning - In The Barrel
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- RE: ATM ? post
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- ATM Polar alignment
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- RE: ATM Polar alignment
- From: "Steele, Kirk A" <SteeleKA@nafm.misawa.af.mil>
- Re: ATM Source of Truss Tubes in the UK
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Polar alignment
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Star Test??
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Oil Spacing an Objective (long post)
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM NEW GRIND METHOD WORKS!
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM tde-tip
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM tde-tip
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM omikron
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM TOOL
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- ATM Power Inverters - Recommendations/Issues
- From: "steve sc" <mbonfire@hotmail.com>
- Re: ATM How to make a box
- From: Steve Vegos <yovw@cdsnet.net>
- Re: ATM How to make a box
- From: Steve Vegos <yovw@cdsnet.net>
- Re: ATM Grinding a 16 inch plate
- From: Steve Vegos <yovw@cdsnet.net>
- Re: ATM Grinding a 16 inch plate
- From: Steve Vegos <yovw@cdsnet.net>
- ATM oven door glass.
- From: stm800@city-net.com
- ATM Inexpensive Focusing Motor
- From: t colbert <k3hx@juno.com>
- ATM Inexpensive focusing motor
- From: t colbert <k3hx@juno.com>
- ATM Inverters
- From: t colbert <k3hx@juno.com>
- ATM Inverters
- From: t colbert <k3hx@juno.com>
- Re: ATM Focusing Motor Digital Readout
- From: t colbert <k3hx@juno.com>
- ATM 1rpm 50lb capacity AC motor
- From: t colbert <k3hx@juno.com>
- ATM Darkest New Moon Ever?
- From: t colbert <k3hx@juno.com>
- ATM Using Baader Solar filter material
- From: tasimmons@west.raytheon.com
- ATM The Ideal Camera
- From: tasimmons@west.raytheon.com
- RE: ATMing in the February S&T
- From: tasimmons@west.raytheon.com
- Re: ATM newbie questions
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM re: atm-digest V1 #1896
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM 3 blobs enough?
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Binocular viewer from a kit - initial impressions
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Re: Newton's Telescope
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Re: Newton's Telescope
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Making Tile tool
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Vignetting
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM A super accurate way to measure microsteps
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Making Tile tool
- From: The Silent Observer <silent1@ix.netcom.com>
- ATM Re:
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM PC's and extreme cold, Vol. 2
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM TOOL
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM FIND..PLATE GLASS,thx MIKE
- From: The Silent Observer <silent1@ix.netcom.com>
- ATM FIND..PLATE GLASS,thx MIKE
- From: thewards@mindspring.com
- Re: ATM FIND..PLATE GLASS,thx MIKE
- From: thewards@mindspring.com
- ATM oil slick on mirror
- From: thewards@mindspring.com
- ATM Garage Sales
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- Re: ATM In the beginning... there was my first 6" blank.
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- ATM Making Tile tool
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- ATM Making tool
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- ATM Screeching while you polish
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- Re: ATM Screeching while you polish (But NOT figure... - go figure!!)
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- Re: ATM re: screeching
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- ATM Christmas
- From: Thomas M Van Pelt <tommyvp@juno.com>
- ATM brownie camera and a telescope...
- From: Thomas M Van Pelt <tommyvp@juno.com>
- Re: ATM brownie camera and a telescope...
- From: Thomas M Van Pelt <tommyvp@juno.com>
- Re: ATM brownie camera and a telescope...
- From: Thomas M Van Pelt <tommyvp@juno.com>
- Re: ATM brownie camera and a telescope...
- From: Thomas M Van Pelt <tommyvp@juno.com>
- ATM Welcome & Orientation For Newcomers
- From: "Thomas O'Hara, PhD" <thomasohara@yahoo.com>
- ATM Seeking Adaptive Optics Links
- From: "Thomas O'Hara, PhD" <thomasohara@yahoo.com>
- ATM Welcome and Orientation for Newcomers (Corrected)
- From: "Thomas O'Hara, PhD" <thomasohara@yahoo.com>
- ATM FIND..PLATE GLASS,thx MIKE
- From: "TIM" <stm800@city-net.com>
- ATM Millies-Lacroix analysis of non-paraboloidal surfaces
- From: Tim Poulsen <poulsen@netacc.net>
- ATM ML.XLS updated
- From: Tim Poulsen <poulsen@netacc.net>
- ATM mak-newt advice
- From: "Tim Rickard" <trickard58@hotmail.com>
- No Subject
- From: "Tim Rickard" <trickard58@hotmail.com>
- Re: ATM Using Baader Solar filter material
- From: <tofkas@uswest.net>
- ATM Molded worm gears - PEC performance
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Coma Correctors and figuring
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM conversion: Ra & Dec to alt/az
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM response needed
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Ready for a refractor.
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM How to make a box
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Coma Correctors and figuring
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM 3 blobs enough?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Binocular viewer from a kit - initial impressions
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Binocular viewer from a kit - initial impressions / Home Made Bino-viewer?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Need some information on the use of Carbon Fibre for Dobsonian upper tube assembly
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Great improvement to AltAz in latest upgrade !
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Millies-Lacroix analysis of non-paraboloidal surfaces
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM newt. focuser baffel
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM new contributed software
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM newt. focuser baffel
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Final Mars Lander image
- From: "Tom Glinos" <tg@utstat.toronto.edu>
- Re: ATM Old English Mount
- From: Tom Lum <toml@ccsi.com>
- Re: ATM inside the secondary cage
- From: "tony dunlap" <banjo2@Bright.net>
- ATM Re: ATM newbie w/questions
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM Ronchi Test
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- Re ATM from Screeces to Scratches
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM Suppliers of abrasives
- From: "Vaughn Smith" <vsmith@seanet.com>
- ATM Re: Glass Balls
- Re: ATM RE: Little Mirror Man.
- From: "Vero and Lisa Joseph" <joseph@interact.net.au>
- Re: ATM Viewing Platform
- From: "Vero and Lisa Joseph" <joseph@interact.net.au>
- Fw: ATM Little Mirror Man.
- From: "Vero and Lisa Joseph" <joseph@interact.net.au>
- Re: ATM conversion: Ra & Dec to alt/az
- ATM Alt-Azimuth Code LONG
- Re: ATM caustic calculations
- Re: ATM NEW GRIND METHOD WORKS!
- Re: ATM Screeching while you polish
- Re: ATM Old English Mount
- Re: ATM The Ideal Camera
- Re: ATM Spider vanes (4 or 3?)
- Re: ATM Aluminum Oxide versus Carbide
- ATM OT: Eye Pieces
- ATM Tool made...
- Re: ATM Tool made...
- Re: ATM Re: Strain in commercial Pyrex
- From: William Marriott <btk@pacbell.net>
Mail converted by MHonArc 2.1.0