Re: ATM Polishing 8" and not sure whats up..

[David McCarter <mccarterd@claven.fanshawec.on.ca>]

>J Davis wrote:
>> During rotation of the
>> strokes it seems to pull harder at some tangents but I have been
>> unable to tell if it always at the same place on the mirror or the
>> lap.

>       What you are describing sounds like normal cranky lap behavior. Warm
>the lap up with a heat lamp (or soak it in warm water), press, and try
>again.

I would add that maybe the use of a mesh between the lap and mirror to
microfacit the lap would reduce the tendency to grab, while increasing the
polishing action.

Dave