Amateur Telescope Makers (ATM) Archive for DEC98 - by author

• Thread Index

• Re: ATM Filling truss tubes
  • From: Aart Olsen <aart@uiuc.edu>
• Re: ATM I need the Dakin Diagonal Offset Calculation Correction
  • From: Aart Olsen <aart@uiuc.edu>
• ATM demise ??
  • From: Adams <adams@rmci.net>
• Re: ATM Demise of S&T
  • From: Adams <adams@rmci.net>
• ATM RE Mirror testing
  • From: Adams <adams@rmci.net>
• ATM Archive
  • From: Adams <adams@rmci.net>
• ATM Dob Clutch
  • From: akelly <akelly@ghg.net>
• ATM Re: atm-digest V1 #1436
  • From: Al Kelly <akelly@ghg.net>
• ATM secondary advice
  • From: "alderlie" <alderliesten.atelier@worldonline.nl>
• ATM Filling truss tubes
  • From: "alderlie" <alderliesten.atelier@worldonline.nl>
• ATM Compact Dobson
  • From: "alderlie" <alderliesten.atelier@worldonline.nl>
• ATM NEW 30 INCH FROM 1 INCH PLATE GLASS !
  • From: "alderlie" <alderliesten.atelier@worldonline.nl>
• ATM Stroke Question
  • From: "alderlie" <alderliesten.atelier@worldonline.nl>
• Re: ATM TDE Mask
  • From: Andrew.Martyn@dao.defence.gov.au
• ATM List Archives updated for November 1998
  • From: "Andy Steere" <andy@www.system.missouri.edu>
• Re: ATM Mirror weights
  • From: Andy Wallace <andywallace@home.com>
• Re: ATM Mirror weights
  • From: Andy Wallace <andywallace@home.com>
• Re: ATM Atomic clock stuff...
  • From: Andy Wallace <andywallace@home.com>
• Re: ATM Atomic clock stuff...
  • From: Andy Wallace <andywallace@home.com>
• Re: ATM Global Positioning System
  • From: Andy Wallace <andywallace@home.com>
• Re: ATMJ help
  • From: Andy Wallace <andywallace@home.com>
• ATM Focuser recommendation
  • From: angel@erys.com.pe (Angel Moyano)
• ATM Re: Focuser Suggestions (feathertouch)
  • From: angel@erys.com.pe (Angel Moyano)
• ATM Focuser recommendation (JMI)
  • From: angel@erys.com.pe (Angel Moyano)
• Re: ATM First project ( (NOT even a) Bit off too much? )
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM First project ( (NOT even a) Bit off too much? )
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM HOME BREW GPS FREQ STD
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM drilling glass
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Light and Colour
  • From: Anthony Stillman <atmer@flash.net>
• Ideal paints (was More experimental ATM)
  • From: Anthony Stillman <atmer@flash.net>
• Ideal paints (was More experimental ATM)
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Re: CeO vs. Rouge
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM new 30" from 1" thick plate glass
  • From: Anthony Stillman <atmer@flash.net>
• ATM Ideal Paint
  • From: Anthony Stillman <atmer@flash.net>
• ATM Gilding
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATMJ help
  • From: Anthony Stillman <atmer@flash.net>
• Re: A new ATM web page
  • From: Anthony Stillman <atmer@flash.net>
• ATM I just recieved a new Byers gear
  • From: "Antonio de Ugarte Postigo" <ugarte@mad.servicom.es>
• RE: ATM I just recieved a new Byers gear
  • From: "Antonio de Ugarte Postigo" <ugarte@mad.servicom.es>
• RE: ATM I just recieved a new Byers gear
  • From: "Antonio de Ugarte Postigo" <ugarte@mad.servicom.es>
• RE: RE[2]: ATM I just recieved a new Byers gear
  • From: "Antonio de Ugarte Postigo" <ugarte@mad.servicom.es>
• RE: ATM I just recieved a new Byers gear
  • From: "Antonio de Ugarte Postigo" <ugarte@mad.servicom.es>
• RE: ATM I just recieved a new Byers gear
  • From: "Antonio de Ugarte Postigo" <ugarte@mad.servicom.es>
• ATM Drive Corrector (need plans)
  • From: "Antonio de Ugarte Postigo" <ugarte@mad.servicom.es>
• RE: Astrographs (Was ATM Demise)
  • From: "Antonio de Ugarte Postigo" <ugarte@mad.servicom.es>
• Re: ATM near disaster
  • From: Ari <Ari@birmingham-us.crosswinds.net>
• Re: ATM Making eyepieces
  • From: Ari <Ari@birmingham-us.crosswinds.net>
• Re: ATM NEW 30 INCH FROM 1 INCH PLATE GLASS !
  • From: Ari <Ari@birmingham-us.crosswinds.net>
• Re: ATM's demise
  • From: Ari <Ari@birmingham-us.crosswinds.net>
• ATM My first major mistake
  • From: Ari <Ari@birmingham-us.crosswinds.net>
• Re: ATM demise
  • From: Ari <Ari@birmingham-us.crosswinds.net>
• Re: ATM Compact Reflector Designing
  • From: Ari <Ari@birmingham-us.crosswinds.net>
• ATM Mirror weights
  • From: "Art Russell" <artrussell@mindspring.com>
• RE: ATM Mirror weights
  • From: "Art Russell" <artrussell@mindspring.com>
• RE: ATM Mirror weights
  • From: "Art Russell" <artrussell@mindspring.com>
• ATM Computerized Dob
  • From: "Art Russell" <artrussell@mindspring.com>
• ATM Politically Correct Season's Greetings, er..
  • From: "Art Russell" <artrussell@mindspring.com>
• ATM Re: atm-digest V1 #1407
  • From: Art Russell <artrussell@mindspring.com>
• ATM Important, very important
  • From: Asaf Shtull-Trauring <astropal@yahoo.com>
• ATM Conclusions
  • From: Asaf Shtull-Trauring <astropal@yahoo.com>
• ATM Lucky lucky
  • From: Asaf Shtull-Trauring <astropal@yahoo.com>
• ATM Youth Astronomy Olympiad- Request
  • From: Asaf Shtull-Trauring <astropal@yahoo.com>
• ATM Close but no cigar... Yet
  • From: Asaf Shtull-Trauring <astropal@yahoo.com>
• ATM New Spider Idea
  • From: Asaf Shtull-Trauring <astropal@yahoo.com>
• ATM Astrophysics Olympiad
  • From: Asaf Shtull-Trauring <astropal@yahoo.com>
• ATM Fwd: Online Telescope Article Website
  • From: Asaf Shtull-Trauring <astropal@yahoo.com>
• Re: more newbie ATM questions
  • From: Asaf Shtull-Trauring <astropal@yahoo.com>
• ATM News from Israel
  • From: Asaf Shtull-Trauring <astropal@yahoo.com>
• Re: ATM - Starry Messanger-- the final insult
  • From: astrojoe@erols.com
• Re: ATMJ #12
  • From: Atmj1@aol.com
• Re: ATMJ help
  • From: Atmj1@aol.com
• Re: ATMJ Help, again
  • From: Atmj1@aol.com
• Re: ATMJ Help
  • From: Atmj1@aol.com
• Re: ATM Demise
  • From: Atmj1@aol.com
• ATM Re: TM Reprints+
  • From: Atmj1@aol.com
• ATM Re: atm-digest V1 #1435
  • From: Atmj1@aol.com
• ATM Re: Apologies to Randall
  • From: Atmj1@aol.com
• ATM Re: Reprints of Everything
  • From: Atmj1@aol.com
• Re: ATM metric units
  • From: Atparke@aol.com
• Re: ATM's demise/ S&T
  • From: "banicki" <banicki@suninternet.com>
• Identifying IC chips - was ATM ccd cameras
  • From: "Bass, Bill" <bbass@LibertyCorp.com>
• RE: ATM Demise
  • From: "Bass, Bill" <bbass@LibertyCorp.com>
• ATM JMI focuser... problems...
  • From: "Benoit Schillings" <benoit@be.com>
• Re: ATM Very Thin Mirrors -- a Plan
  • From: "Benoit Schillings" <benoit@be.com>
• ATM:Wonderful source for filters...
  • From: "Benoit Schillings" <benoit@be.com>
• Re: ATM Covering For Truss Tubes
  • From: "Betsy or Mike Marchand" <bmarchan@mnsi.net>
• Re: ATM Making eyepieces
  • From: "Betsy or Mike Marchand" <bmarchan@mnsi.net>
• ATM Opinions needed
  • From: "Bill Cotten" <billsas@worldnet.att.net>
• ATM Hello??
  • From: "Bill Cotten" <billsas@worldnet.att.net>
• Re: ATM Hello??
  • From: "Bill Cotten" <billsas@worldnet.att.net>
• Re: ATM Sticky Pitch
  • From: "Bill Hollenbach" <zasah52@iafrica.com>
• ATM changing camera f stop
  • From: "Bill Hollenbach" <zasah52@iafrica.com>
• ATM Quadrant Lap
  • From: Bill Marriott <btk@pacbell.net>
• ATM Re:diamond tooling
  • From: Bill Marriott <btk@pacbell.net>
• Re: ATM Quartz Newtonian secondary
  • From: Bill Marriott <btk@pacbell.net>
• Re: S&T and the State of ATMing
  • From: Bill McClain <wmcclain@salamander.com>
• Re: ATM's demise
  • From: Bill McHale <wmchal1@umbc.edu>
• Re: S&T and the State of ATMing
  • From: Bill McHale <wmchal1@umbc.edu>
• Re: S&T & ATMing
  • From: Bill McHale <wmchal1@umbc.edu>
• Re: S&T and the State of ATMing
  • From: Bill McHale <wmchal1@umbc.edu>
• Re: ATM Demise of S&T
  • From: Bill McHale <wmchal1@umbc.edu>
• ATM Covering For Truss Tubes
  • From: Bill Milner <wdmilner@uswest.net>
• ATM Wavefront vs: slope error vs: RMS
  • From: goffaxe@azstarnet.com (Bob & Valerie Goff)
• Re: Regarding Your Letter On ATM List
  • From: goffaxe@azstarnet.com (Bob & Valerie Goff)
• Re: ATM Wavefront vs: slope error vs: RMS
  • From: goffaxe@azstarnet.com (Bob & Valerie Goff)
• Re: ATM Ready to build - Where to Buy
  • From: Bob Bond <rgb@ncube.com>
• Re: ATM Synching to atomic clock via SNTP...
  • From: "Bob Hoke" <bobh@thinktech.com>
• ATM PIN photodiodes
  • From: Bob Liesenfeld <wb0poq@visi.com>
• Re: ATM "The Glass Giant of Palomar"
  • From: Bob Liesenfeld <wb0poq@visi.com>
• RE: ATM I need your help, guys!
  • From: BOB PRABOWO <BOB@bahana.co.id>
• RE: ATM I need your help, guys!
  • From: BOB PRABOWO <BOB@bahana.co.id>
• RE: ATM New to this list and Couder masks
  • From: BOB PRABOWO <BOB@bahana.co.id>
• RE: ATM Hogging and tile tools
  • From: BOB PRABOWO <BOB@bahana.co.id>
• Re: ATM Focuser recommendation
  • From: BodyByJay@aol.com
• Re: ATM Conclusions
  • From: BodyByJay@aol.com
• ATM Redshift 3
  • From: BodyByJay@aol.com
• Re: ATM secondaries shadow
  • From: BodyByJay@aol.com
• Re: ATM Quartz Newtonian secondary
  • From: BodyByJay@aol.com
• ATM Got my BVC blank
  • From: "bprewitt" <bprewitt@neo.rr.com>
• ATM 20" BVC - part 1
  • From: "bprewitt" <bprewitt@neo.rr.com>
• Re: ATM Another Tile question
  • From: "bprewitt" <bprewitt@neo.rr.com>
• Re: ATM Another Tile question
  • From: "bprewitt" <bprewitt@neo.rr.com>
• ATM Slitless Tester
  • From: Brad Davy <bdavy@fred.net>
• Re: ATM Cradle Rings and things
  • From: Brad Davy <bdavy@fred.net>
• Re: ATM Mel's stepper circuit, a question
  • From: Brad Davy <bdavy@fred.net>
• ATM Function vs. Form
  • From: Bradley Davy <bdavy@fred.net>
• ATM Six Inch for CCD Photography
  • From: Bradley Davy <bdavy@fred.net>
• Re: ATM Dob Clutch
  • From: Bradley Davy <bdavy@fred.net>
• Re: ATM Sources for tester plans
  • From: Bradley Davy <bdavy@fred.net>
• Re: ATM LED Brightness, was Sources for tester plans
  • From: Bradley Davy <bdavy@fred.net>
• Re: ATM better result with slitless tester ?
  • From: Bradley Davy <bdavy@fred.net>
• Re: ATMJ help
  • From: Bradley Davy <bdavy@fred.net>
• ATM Re: Feathertouch
  • From: Brandon Mathew <brandon@core.rose.hp.com>
• ATM Any tips on applying Kydex?
  • From: Brandon Mathew <brandon@core.rose.hp.com>
• Re: ATM 40 Pounder Report
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM beginners basic mirror question
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM beginners basic mirror question
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM beginners basic mirror question
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: Re: ATM First project ( (NOT even a) Bit off too much?
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM beginners basic mirror question
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM metric units
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM Offner-big mirror null test
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM Large Slevogt Camera Mount
  • From: Bratislav Curcic <epabcc@epa.ericsson.se>
• Re: ATM Shrouds still have a purpose
  • From: Brent Russell <brussel@global.co.za>
• A new ATM web page
  • From: Brett Schaerer <schaerb@ava.bcc.orst.edu>
• Re: ATM Synching to atomic clock via SNTP...
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM metric units
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Coma
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM and LIbRARIES
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM What size airline carryon?
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM recoating EP
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM beginner projects
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM Golding?
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM University Optics
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM University Optics
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM refractor focuser help
  • From: Brian Nestel <blast@aloha.net>
• Re: ATM - Demise
  • From: Brian Nestel <blast@aloha.net>
• more newbie ATM questions
  • From: Brian Yankee <byankee@fas.harvard.edu>
• RE: ATM Shrouds still have a purpose
  • From: "Bruce Sayre" <sayre@foothill.net>
• RE: ATM Synching to atomic clock via SNTP
  • From: "Bruce Sayre" <sayre@foothill.net>
• Re: ATM Six Inch RFT Web Page
  • From: Bruce Weertman <brucew@wrq.com>
• Re: ATM Lapper 12
  • From: btk@pacbell.net
• Re: ATM Important, very important
  • From: Buck Childers <buckchil@sound.net>
• Re: ATM new 30" from 1" thick plate glass
  • From: Buck Childers <buckchil@sound.net>
• RE: ATM Quartz Newtonian secondary
  • From: <c_treptow@compusearch.com>
• Re: S&T and the State of ATMing
  • From: Callum Potter <CallumP@selectst.com>
• Re: ATM RE: Equatorial Platforms
  • From: Callum Potter <CallumP@selectst.com>
• ATM Earth-in-space globe: where to get one NOW?
  • From: Carl Woebcke <carlw@telis.org>
• ATM Planet Earth globe: where to buy NOW? #2
  • From: Carl Woebcke <carlw@telis.org>
• Re: ATM Shrouds still have a purpose
  • From: Cary Chleborad <bennu@ns.net>
• ATM HYPERBOLA
  • From: Cary Chleborad <bennu@ns.net>
• Re: ATM Laminated mirrors
  • From: Cary Chleborad <bennu@ns.net>
• RE: ATM I need your help, guys!
  • From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
• RE: ATM beginners basic mirror question
  • From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
• RE: ATM Q re dichroic mirrors for color correcting a lens
  • From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
• RE: ATM Coma
  • From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
• RE: ATM Re: GPS time receiver (was Atomic Clock via SNTP)
  • From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
• Re: ATM Ronchi grids
  • From: "Cho, Wilson" <wcho@microsemi.com>
• Re: ATM Six Inch RFT Web Page
  • From: Christopher Krubel <ckrubel@bellsouth.net>
• Re: SV: ATM Foucault Simulator
  • From: Christopher Krubel <ckrubel@bellsouth.net>
• Re: ATM Focuser recommendation
  • From: Chuck Dethloff <telmor@teleport.com>
• RE: ATM Mirror weights
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM Covering For Truss Tubes
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM Compact Dobson
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM What size airline carryon?
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM is strong!
  • From: Chuck Dethloff <telmor@teleport.com>
• ATM Ray's Travel Scope
  • From: Chuck Dethloff <telmor@teleport.com>
• ATM RE: Diamond blades
  • From: Chuck Hards <chuckh@companionsystems.com>
• ATM Naked Mag-lite bulbs & Ronchi grids
  • From: Chuck Hards <chuckh@companionsystems.com>
• ATM Decline (Reports of my death have been greatly exagerated..)
  • From: Chuck Hards <chuckh@companionsystems.com>
• ATM professional vs. amateur optics
  • From: Chuck Hards <chuckh@companionsystems.com>
• Re: ATM professional vs. amateur optics
  • From: Chuck Hards <chuckh@companionsystems.com>
• ATM End the S & T thread
  • From: Chuck Hards <chuckh@companionsystems.com>
• Re: ATM End the S & T thread
  • From: Chuck Hards <chuckh@companionsystems.com>
• Re: ATM End the S & T thread
  • From: Chuck Hards <chuckh@companionsystems.com>
• ATM I need your help, guys!
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: ATM I need your help, guys!
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: ATM I need your help, guys!
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: ATM Hogging and tile tools
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: re:ATM Foucault telescope lense?
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: More experimental ATM
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: ATM broken glass=broken dream??
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: ATM Black Rouge (was Technique for smoothing)
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: ATM mirror kits - "Used"
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: ATM RE: rouge vs. CeO + "dirt" and more...
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: ATM Optical coating companies
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: ATM PVC Pipe telescope body
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: ATM Re: PVC telescope tubes
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: ATMer's: I need figuring lap sizes
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• ATM Placement of secondary mirror
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: ATMJ help
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: ATM's demise
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: ATM Focault Testing
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• Re: ATM Cradle Rings and things
  • From: "Chuck Hovatter" <charleshovatter@acelink.net>
• ATM Re: Equatorial Platforms
  • From: "Chuck Shaw" <cshaw@ghg.net>
• Re: ATM RE: Equatorial Platforms
  • From: "Chuck Shaw" <cshaw@ghg.net>
• ATM Equatorial Platform Tangent Error
  • From: "Chuck Shaw" <cshaw@ghg.net>
• ATM BinoBall balance?
  • From: Clark MacDonald <clark@tarpon.mitra.com>
• ATM better result with slitless tester ?
  • From: claudio minutella <minutella@tic.ch>
• Re: ATM beginners basic mirror question
  • From: "Clive Milne" <milnecd@wantree.com.au>
• Re: ATM First project ( (NOT even a) Bit off too much? )
  • From: "Clive Milne" <milnecd@wantree.com.au>
• Re: ATM Covering For Truss Tubes
  • From: "Clive Milne" <milnecd@wantree.com.au>
• Re: ATM metric units
  • From: "Clive Milne" <milnecd@wantree.com.au>
• Re: ATM Filling truss tubes
  • From: "Clive Milne" <milnecd@wantree.com.au>
• Re: ATM metric units
  • From: CLK <kavestal@clk.k12.mi.us>
• ATM Need help in selecting DSC
  • From: Cmgcompany@aol.com
• Need to Find fellow ATM'er
  • From: Cmgcompany@aol.com
• ATM EMAIL ADDRESS **THANKS TO ALL WHO HELPED**
  • From: Cmgcompany@aol.com
• ATM's demise/further information
  • From: colt <colt@airmail.net>
• Re: ATMJ Help, again
  • From: Curtis & Marcie Greer <greerc@icx.net>
• Re: S&T and the State of ATMing
  • From: Curtis & Marcie Greer <greerc@icx.net>
• ATM Advise on port-o-scroung-o-scope ventilation
  • From: Dale Campbell <campbeld@abs-lcms.com>
• ATM First Light for Scroung-o-porto-scope (dim)
  • From: Dale Campbell <campbeld@abs-lcms.com>
• Re: ATM Another Tile question
  • From: "Dan Brown" <danb35@earthlink.net>
• Re: ATM Sources for tester plans
  • From: Dan Brown <danb35@earthlink.net>
• Re: ATM Return of the Newbie.... Pitch question
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM continually working MOT
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM Hogging and tile tools
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM continually working MOT
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM TDE Mask--> I Want to Refigure Mirror
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM Technique for smoothing small mirrors (long)
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM metric units
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM Complete Mirror Kit
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM secondaries shadow
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM Newbie grinding question, contact problem
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• SV: ATM RE: DIFFRACTION AND SECONDARY SHADOW
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM Re: CeO vs. Rouge
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM Re: CeO vs. Rouge
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM RE: rouge vs. CeO
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM Silvering Techniques
  • From: "Dan Chaffee" <dchaffee@gvi.net>
• Re: ATM Hogging and tile tools
  • From: "Danie Malan" <DGM@it.sun.ac.za>
• Re: ATM Terracotta
  • From: "Danie Malan" <DGM@it.sun.ac.za>
• Re: ATM Making eyepieces
  • From: "Danie Malan" <DGM@it.sun.ac.za>
• Re: ATM Bad Message
  • From: Daniel Fundo <fundo@bellsouth.net>
• ATM Byers Still in Business
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM Byers Still in Business
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM Synching to atomic clock via SNTP...
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM - Starry Messanger-- the final insult
  • From: Daniel Fundo <fundo@Bellsouth.net>
• Re: ATMJ help
  • From: Daniel Fundo <fundo@Bellsouth.net>
• Re: ATM demise
  • From: Daniel Fundo <fundo@Bellsouth.net>
• Re: S&T and the State of ATMing
  • From: Daniel Fundo <fundo@Bellsouth.net>
• ATM update on my activities
  • From: Daniel Kahraman <ishtar66@speedline.ca>
• Re: ATM Synching to atomic clock via SNTP...
  • From: Dave and Sherry Trahan <strahan@umd5.umd.edu>
• ATM flaw found in fine grinding
  • From: Dave Mallery <dmallery@cia-g.com>
• ATM mirror
  • From: Dave Mallery <dmallery@cia-g.com>
• Re: ATM Re: Sources of PC Clock Synchronization Software
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Synching to atomic clock via SNTP...
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Compact Dobson
  • From: Dave Sopchak <das@po.cwru.edu>
• ATM Plate and pyrex polishing
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATMJ help
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Foucault Testing
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Ceramic Tile question
  • From: Dave Sopchak <das@po.cwru.edu>
• Re: ATM Demise of S&T
  • From: "David B. Toth" <ve3gyq@amsat.org>
• Re: ATM Demise of S&T
  • From: "David B. Toth" <ve3gyq@amsat.org>
• ATM ccd cameras
  • From: David Bevel <davebevel@mindspring.com>
• ATM Lost messages
  • From: David Bevel <davebevel@mindspring.com>
• Re: ATM Stroke Question
  • From: David Bevel <davebevel@mindspring.com>
• Re: ATM better result with slitless tester ?
  • From: David Bevel <davebevel@mindspring.com>
• Re: ATM Mel's stepper circuit, a question
  • From: David Bevel <davebevel@mindspring.com>
• Re: ATM Shrouds still have a purpose
  • From: "David H. Lilly" <dhl@sprynet.com>
• Re: ATM Golding?
  • From: "David H. Lilly" <dhl@sprynet.com>
• Re: ATM Synching to atomic clock via SNTP...
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM B.V.C. concerns
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM Polishing 8" and not sure whats up..
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATMJ help
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM 12 V AC Power supply for Camtrak ??
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATMJ Help, again
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM gear ratios
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: S&T & ATMing
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: S&T & ATMing
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM TV zoom lenses
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM TV zoom lenses
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• Re: ATM
  • From: David McCarter <mccarterd@claven.fanshawec.on.ca>
• ATM Signing off the list - dumb stile :)
  • From: "David Ramalho" <mop12506@mail.telepac.pt>
• ATM GPS
  • From: David Reed <dzreed@mail.rdu.bellsouth.net>
• ATM Newport's plate glass tools.
  • From: "David Reynolds" <davidrey@ij.net>
• ATM ID 4" Lenses?
  • From: David Sleeter <sleete19@idt.net>
• ATM FS: Heavy Duty Tripod
  • From: David Sleeter <sleete19@idt.net>
• ATM FS: Large Tripod: Correction
  • From: David Sleeter <sleete19@idt.net>
• ATM Tripod Auction Back On
  • From: David Sleeter <sleete19@idt.net>
• ATM Apology for tripod ad
  • From: David Sleeter <sleete19@idt.net>
• ATM Making eyepieces
  • From: "Dawie Botes" <dawieb@wwg3.uovs.ac.za>
• ATM recoating EP
  • From: dcartolano@snet.net
• Re: ATM lens
  • From: Del Stanton <sd20@earthlink.net>
• Re: ATM Camera Cable Thread Pitch
  • From: Del Stanton <sd20@earthlink.net>
• Re: ATM Source for diamond bandsaw blades?
  • From: Dennis Rech <junkman@olywa.net>
• Re: ATM Silicon on mirror face
  • From: Dennis Rech <junkman@olywa.net>
• ATM Super accurate parabolic grinder
  • From: dhill@mail.usa.com
• ATM Picture of Parabolic Grinder
  • From: dhill@mail.usa.com
• ATM Parabolic Grinder Error
  • From: dhill@mail.usa.com
• ATM Parabolic Grinder Discussion
  • From: dhill@mail.usa.com
• Re: ATM Synching to atomic clock via SNTP...
  • From: Diego Alejandro Protas <dprotas@fi.uba.ar>
• ATM NEWT question
  • From: Diego Protas <dprotas@fi.uba.ar>
• Re: ATM a couple fine grinding questions
  • From: Diego Protas <dprotas@fi.uba.ar>
• RE: ATMJ help
  • From: Don Ware - CSS <Don.Ware@digital.com>
• Re: ATM Technique for smoothing small mirrors (long)
  • From: Donald Clement <clement@inetworld.net>
• Re: ATM secondaries shadow
  • From: Donald Clement <clement@inetworld.net>
• ATM Re: Black Rouge (was Technique for smoothing)
  • From: Donald Clement <clement@inetworld.net>
• ATM Camera Cable Thread Pitch
  • From: Donald Clement <clement@commquest.com>
• Re: ATM Why?(was: no subject)
  • From: Donald Clement <clement@commquest.com>
• ATM Adventures of the Red Rouge
  • From: Donald Clement <clement@commquest.com>
• Re:ATM's demise
  • From: Donald Clement <clement@commquest.com>
• ATM Demise of S&T
  • From: Donald Clement <clement@commquest.com>
• Re: ATM Demise of S&T
  • From: Donald Clement <clement@commquest.com>
• Re: ATM End the S & T thread
  • From: Donald Clement <clement@inetworld.net>
• ATM stiffness requirements for truss tubes
  • From: Doug Angle <Douglas.S.Angle@can.dupont.com>
• Re: ATM Online resources for gears
  • From: "dpitou" <dpitou@ix.netcom.com>
• Re: ATM Large Slevogt Camera Mount
  • From: "dpitou" <dpitou@ix.netcom.com>
• ATM Info on Australia Requested
  • From: DROWESMI@aol.com
• Re: ATM Coma (was: beginners basic mirror question)
  • From: DROWESMI@aol.com
• Re: ATM Technique for smoothing small mirrors (long)
  • From: DROWESMI@aol.com
• ATM Speed of Light (very OT)
  • From: DROWESMI@aol.com
• Re: ATM Global Positioning System
  • From: DROWESMI@aol.com
• Re: ATM Six Inch for CCD Photography
  • From: DROWESMI@aol.com
• ATM Large Slevogt Camera Mount
  • From: DROWESMI@aol.com
• Re: ATM Global Positioning System
  • From: DROWESMI@aol.com
• ATM Very Thin Mirrors -- a Plan
  • From: DROWESMI@aol.com
• ATM Very Thin Mirrors (part 2)
  • From: DROWESMI@aol.com
• Re: ATM Ronchi grids
  • From: DROWESMI@aol.com
• Re: ATM Got my BVC blank
  • From: DROWESMI@aol.com
• Re: ATMer's: I need figuring lap sizes
  • From: DROWESMI@aol.com
• Re: ATM Tiny scratch - Polish or regrind?
  • From: DROWESMI@aol.com
• Astrographs (Was ATM Demise)
  • From: DROWESMI@aol.com
• Re: ATM Important, very important
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM New to this list and Couder masks
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Conclusions
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM beginners basic mirror question
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Need 1 RPH 12 volt motor
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM TDE Mask
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Conclusions
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM focault tester use
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM BinoBall balance?
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Hogging and tile tools
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Re: GPS time receiver (was Atomic Clock via SNTP)
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM HYPERBOLA
  • From: Dwight Elvey <elvey@hal.com>
• ATM secondaries shadow
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Complete Mirror Kit
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM RE: DIFFRACTION AND SECONDARY SHADOW
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM RE: DIFFRACTION AND SECONDARY SHADOW
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Foucault telescope lense?
  • From: Dwight Elvey <elvey@hal.com>
• Re: SV: Re[2]: ATM Truss tubes - 4, 6, or 8?
  • From: Dwight Elvey <elvey@hal.com>
• Re: SV: ATM RE: DIFFRACTION AND SECONDARY SHADOW
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Progress on first mirror etc.
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: SV: Re[2]: ATM Truss tubes - 4, 6, or 8?
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM and LIbRARIES
  • From: Dwight Elvey <elvey@hal.com>
• Re[3]: ATM Foucault telescope lense?
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Slitless tester question
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Re: Dob Clutch
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Global Positioning System
  • From: Dwight Elvey <elvey@hal.com>
• Re: SV: ATM RE: DIFFRACTION AND SECONDARY SHADOW
  • From: Dwight Elvey <elvey@hal.com>
• Re: Rebuilding an old ATM Scope
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM crying over broken glass
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Need help in selecting DSC
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Re: CeO vs. Rouge
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM beginner projects
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Sources for tester plans
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Calculating Newtonian diagonal size
  • From: Dwight Elvey <elvey@hal.com>
• Re[3]: ATM Sources for tester plans
  • From: Dwight Elvey <elvey@hal.com>
• ATM Vacuum Chamber
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Calculating Newtonian diagonal size.
  • From: Dwight Elvey <elvey@hal.com>
• Re: SV: ATM Calculating Newtonian diagonal size.
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Calculating Newtonian diagonal size.
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Telescope "renovating"
  • From: Dwight Elvey <elvey@hal.com>
• Re: SV: ATM Calculating Newtonian diagonal size
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Foucault Tester Photos Updated -Reply
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM EP distortion - was Calculating Newtonian diagonal size.
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Foucault Tester Photos Updated -Reply
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM Foucault Tester Photos Updated -Reply
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM LED Brightness, was Sources for tester plans
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Naked Mag-lite bulbs & Ronchi grids
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM LED Brightness, was Sources for tester plans
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM 12 V AC Power supply for Camtrak ??
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM better result with slitless tester ?
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM's demise
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM The project is on it's way
  • From: Dwight Elvey <elvey@hal.com>
• Re[2]: ATM 12 V AC Power supply for Camtrak ??
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Focault Testing
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM mirror testing
  • From: Dwight Elvey <elvey@hal.com>
• Re: ATM Synching to atomic clock via SNTP...
  • From: Earl Needham <kd5xb@amsat.org>
• Re: ATM Synching to atomic clock via SNTP...
  • From: Earl Needham <kd5xb@amsat.org>
• Re: ATM metric units
  • From: Earl Needham <kd5xb@amsat.org>
• Re: ATM metric units
  • From: Earl Needham <kd5xb@amsat.org>
• Re: ATM Filling truss tubes
  • From: Earl Needham <kd5xb@amsat.org>
• ATM First light
  • From: Ed Falk <Ed.Falk@eng.sun.com>
• Re: ATM Covering For Truss Tubes
  • From: Ed Falk <Ed.Falk@eng.sun.com>
• Re: ATM Where to find truss tubes?
  • From: Ed Falk <Ed.Falk@eng.sun.com>
• Re: ATM Complete Mirror Kit
  • From: Ed Falk <Ed.Falk@eng.sun.com>
• ATM Re: Mirror Kit -- update
  • From: Ed Falk <Ed.Falk@eng.sun.com>
• ATM Re: Compact Dobson
  • From: Ed Falk <Ed.Falk@eng.sun.com>
• ATM atmpage.com is back
  • From: Ed Falk <Ed.Falk@eng.sun.com>
• ATM Need 1 RPH 12 volt motor
  • From: Ed Stevens <ehs@teleport.com>
• ATM Where to find truss tubes?
  • From: Ed Stevens <ehs@teleport.com>
• ATM Full thickness 16" mirror question
  • From: Ed Stevens <ehs@teleport.com>
• Re: ATM Compact Dobson
  • From: Ed Stevens <ehs@teleport.com>
• ATM What size airline carryon?
  • From: Ed Stevens <ehs@teleport.com>
• Re: ATM Source for diamond bandsaw blades?
  • From: Eli Vandevoorde <elivv@efn.org>
• ATM Wooden equatorial mount in TM#24
  • From: Eric Allen <ericallen@worldnet.att.net>
• ATM atm re: PVC pipe
  • From: Eric Allen <ericallen@worldnet.att.net>
• Re: ATM re: PVC pipe
  • From: Eric Allen <ericallen@worldnet.att.net>
• Re: ATM beginner projects
  • From: wattsworth@juno.com (Eric Eggleston)
• Re: ATM Aluminium mirrors
  • From: "Fabio Falchi" <falchifa@tin.it>
• ATM metric units
  • From: "Fabio Falchi" <falchifa@tin.it>
• R: ATM metric units
  • From: "Fabio Falchi" <falchifa@tin.it>
• ATM (ot) Yet another home page
  • From: "Fansler, David" <DFANSLER@autocyte.COM>
• RE: ATM NEW 30 INCH FROM 1 INCH PLATE GLASS !
  • From: "Fields, Jonathan A." <FIELDSJ@coned.com>
• RE: Re[2]: ATM Sources for tester plans
  • From: "Fields, Jonathan A." <FIELDSJ@coned.com>
• Re: ATM source for diamond bandsaw blades
  • From: "FINEGAN" <FINEGAN@PRODIGY.NET>
• ATM Technique for smoothing small mirrors (long)
  • From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
• Re: ATM Technique for smoothing small mirrors (long)
  • From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
• Re: ATM Technique for smoothing small mirrors (long)
  • From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
• ATM Rouge; better choice for novice? (was smoothing a small mirror)
  • From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
• Re: ATM Complete Mirror Kit
  • From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
• ATM Optical coating companies
  • From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
• Re: ATM Cradle Rings and things
  • From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
• Re: ATM Newport's plate glass tools.
  • From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
• Re: ATM Pennies for Alice
  • From: "Frank Ward" <thewards@pop.mindspring.com>
• Re: ATM beginners basic mirror question
  • From: "Frank Ward" <thewards@pop.mindspring.com>
• ATM Shafer/Mac/Cass
  • From: "Frank Ward" <thewards@pop.mindspring.com>
• Re: ATM Technique for smoothing small mirrors (long)
  • From: "Frank Ward" <thewards@pop.mindspring.com>
• Re: ATM Coatings-Advice Requested
  • From: "Frank Ward" <thewards@pop.mindspring.com>
• ATM's demise
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM's demise
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM New Spider Idea
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM's demise
  • From: "Frank Ward" <thewards@mindspring.com>
• ATM fochalt images
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM Foucault Testing
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: S&T and the State of ATMing
  • From: "Frank Ward" <thewards@mindspring.com>
• ATM You Know What
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM stiffness requirements for truss tubes
  • From: "Frank Ward" <thewards@mindspring.com>
• ATM Shafer designs
  • From: "Frank Ward" <thewards@mindspring.com>
• Re: ATM beginners basic mirror question
  • From: Frank Ward <thewards@pop.mindspring.com>
• Re: ATM metric units
  • From: Frank Ward <thewards@pop.mindspring.com>
• Re: ATM Re: atm-digest V1 #1409
  • From: Frank Ward <thewards@pop.mindspring.com>
• ATM lens
  • From: Frank Ward <thewards@pop.mindspring.com>
• Re: ATM Dob Clutch
  • From: Frank Ward <thewards@pop.mindspring.com>
• ATM crying over broken glass
  • From: Frank Ward <thewards@pop.mindspring.com>
• ATM my new scope
  • From: Frank Ward <thewards@pop.mindspring.com>
• ATM correction
  • From: Frank Ward <thewards@pop.mindspring.com>
• ATM correction
  • From: Frank Ward <thewards@pop.mindspring.com>
• Re: ATMJ help
  • From: Frank Ward <thewards@pop.mindspring.com>
• ATM postcard
  • From: Frank Ward <thewards@pop.mindspring.com>
• Re: ATMJ help
  • From: Gary Seronik <gseronik@netway.com>
• S&T and the State of ATMing
  • From: Gary Seronik <gseronik@netway.com>
• Re: S&T & ATMing
  • From: Gary Seronik <gseronik@netway.com>
• Re: ATM TEX and Star Test Agree!
  • From: Gary Seronik <gseronik@netway.com>
• Re: S&T and the State of ATMing
  • From: Gary Seronik <gseronik@netway.com>
• Re: ATM Demise & S&T
  • From: Gary Seronik <gseronik@netway.com>
• ATM AL. Tubing
  • From: gary thomas <thomas@pld.com>
• Re: ATM's demise
  • From: gary thomas <thomas@pld.com>
• Re: ATM Bad Message
  • From: gwoods@albany.net (Gary Woods)
• Re: ATM metric units
  • From: gwoods@albany.net (Gary Woods)
• Re: ATM metric units
  • From: gwoods@albany.net (Gary Woods)
• Re: ATM metric units
  • From: gwoods@albany.net (Gary Woods)
• ATM Re: Dyna-monsters
  • From: gwoods@albany.net (Gary Woods)
• ATM Re: Holiday lights
  • From: gwoods@albany.net (Gary Woods)
• Re: ATM - Starry Messanger-- the final insult
  • From: gwoods@albany.net (Gary Woods)
• ATM Re: Crystals for the Axis...more
  • From: gwoods@albany.net (Gary Woods)
• Re: ATM Parabolic Grinder Discussion
  • From: gwoods@albany.net (Gary Woods)
• ATM TV zoom lenses
  • From: gwoods@albany.net (Gary Woods)
• Re: ATM Byers Still in Business
  • From: Gene Horr <genehorr@swbell.net>
• Re: ATM's demise
  • From: Gene Horr <genehorr@swbell.net>
• Re: ATM's demise
  • From: Gene Horr <genehorr@swbell.net>
• Re: ATM's demise
  • From: Gene Horr <genehorr@swbell.net>
• Re: ATMJ Help
  • From: Gene Horr <genehorr@swbell.net>
• ATM Mark Suchtung where are you?
  • From: "Geoffrey William Dudley" <gdudley@swin.edu.au>
• ATM Adler Planetarium -- was Re: ATM Six Inch RFT Web Page
  • From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
• Re: ATM better result with slitless tester ?
  • From: "Gil Stacy" <gstacy@premierweb.net>
• Re: ATM's demise
  • From: "Gil Stacy" <gstacy@premierweb.net>
• Re: ATM - Demise
  • From: "Gil Stacy" <gstacy@premierweb.net>
• Re: ATM Wavefront vs: slope error vs: RMS
  • From: "Gil Stacy" <gstacy@premierweb.net>
• Re: ATM Offner-big mirror null test
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM Offner-big mirror null test
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM Black Rouge (was Technique for smoothing)
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM Re: CeO vs. Rouge
  • From: Gil Stacy <gstacy@premierweb.net>
• Re: ATM Foucault Tester Photos Updated -Reply
  • From: Gil Stacy <gstacy@premierweb.net>
• ATM Re: Dob Clutch
  • From: Glen Warchol <glenwarchol@sltrib.com>
• S&T and the State of ATMing
  • From: Glen Warchol <glenwarchol@sltrib.com>
• ATM Bino collimnation
  • From: Glen Warchol <glenwarchol@sltrib.com>
• Re: ATM Shrouds still have a purpose
  • From: "Greg Babcock" <gregb@iccom.com>
• Re: ATM Covering For Truss Tubes
  • From: "Greg Babcock" <gregb@iccom.com>
• Fw: ATM Any tips on applying Kydex?
  • From: "Greg Babcock" <gregb@iccom.com>
• Re: ATM First project ( Bit off too much? )
  • From: GregJ888@aol.com
• Re: ATM Synching to atomic clock via SNTP...
  • From: GregJ888@aol.com
• Re: ATM Synching to atomic clock via SNTP...
  • From: GregJ888@aol.com
• Re: ATM CCD Devices
  • From: GregJ888@aol.com
• Re: ATM Re: CeO vs. Rouge
  • From: GregJ888@aol.com
• Re: ATM's demise
  • From: GregJ888@aol.com
• Re: S&T and the State of ATMing
  • From: GregJ888@aol.com
• Re: ATM spherometer philosophy
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM metric units
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM metric units
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM Coma
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM Progress on first mirror etc.
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM Tiny scratch - Polish or regrind?
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM Foucault Testing
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re: ATM demise/education
  • From: "Guy F. Brandenburg" <guyfbran@erols.com>
• Re[2]: ATM Truss tubes - 4, 6, or 8?
  • From: "Hennecke, Marcus Dr." <Marcus.Hennecke@vs.dasa.de>
• Re: ATM NEW 30 INCH FROM 1 INCH PLATE GLASS !
  • From: Hernan Lucas Gil Peruzzotti <Piccard@fibertel.com.ar>
• re:ATM Opinions needed
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:ATM Question re: University Optics Mirror Cell
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:ATM Foucault telescope lense?
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:ATM Progress on first mirror etc.
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:ATM Re: Dob Clutch
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:Re: ATM RE: rouge vs. CeO
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:Re: ATM RE: rouge vs. CeO
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:ATM Focault Testing
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:Re: ATM University Optics
  • From: "Howard Banich" <Howard.Banich@nike.com>
• re:Re: ATM RE: Equatorial Platforms
  • From: "Howard Banich" <Howard.Banich@nike.com>
• Re: ATM Optical coating companies
  • From: "Howard L. Clausing" <hclaus@clausing.com>
• ATM Thin TDE or diffraction ring?
  • From: Hugues_Laroche@ses-astra.com
• Re: ATM Mirror weights
  • From: Hugues_Laroche@ses-astra.com
• Re: ATM metric units
  • From: Hugues_Laroche@ses-astra.com
• ATM Offtopic: unhooking for a while
  • From: Hugues_Laroche@ses-astra.com
• ATM Help! Dobsonian history!
  • From: "Igor G. Rozivika" <aso@sbor.ru>
• Re: ATM Need 1 RPH 12 volt motor
  • From: iss@pvtnetworks.net
• Re: ATM Coma (was: beginners basic mirror question)
  • From: iss@pvtnetworks.net
• Re: ATM Byers Still in Business
  • From: iss@pvtnetworks.net
• Re: ATM Beginner questions
  • From: iss@pvtnetworks.net
• Re: ATM Fwd: Bino-viewers
  • From: iss@pvtnetworks.net
• Re: ATM RE: DIFFRACTION AND SECONDARY SHADOW
  • From: iss@pvtnetworks.net
• Re: SV: ATM RE: DIFFRACTION AND SECONDARY SHADOW
  • From: iss@pvtnetworks.net
• Re: ATM Six Inch for CCD Photography
  • From: iss@pvtnetworks.net
• Re: ATM Horror stories
  • From: iss@pvtnetworks.net
• Re: ATM Self positioning telescope (was GPS)
  • From: iss@pvtnetworks.net
• Re: ATM image intensified astronomy
  • From: iss@pvtnetworks.net
• Re: ATM gear ratios
  • From: iss@pvtnetworks.net
• Re: ATM gear ratios
  • From: iss@pvtnetworks.net
• Re: ATM RE: Equatorial Platforms
  • From: iss@pvtnetworks.net
• Re: ATM Compact Reflector Designing
  • From: iss@pvtnetworks.net
• Re: ATM Cradle Rings and things
  • From: iss@pvtnetworks.net
• Re: ATM beginners basic mirror question
  • From: Ivan Curtis <icurtis@radlogic.com.au>
• ATM Return of the Newbie.... Pitch question
  • From: "J Davis" <jeffd@ionet.net>
• Re: ATM Beginner questions
  • From: "J Davis" <jeffd@ionet.net>
• ATM Newbie grinding question, contact problem
  • From: "J Davis" <jeffd@ionet.net>
• Re: ATMer's: I need figuring lap sizes
  • From: "J Davis" <jeffd@ionet.net>
• ATM Polishing 8" and not sure whats up..
  • From: "J Davis" <jeffd@ionet.net>
• Re: ATM Demise & S&T
  • From: "J. Christopher Westland" <westland@ust.hk>
• Re: ATM SCT Cooling Fan
  • From: "J. Davis" <jeffd@ionet.net>
• Re: ATM Re: CeO vs. Rouge
  • From: "J.O. Williams" <jow@techbase.com>
• Re: ATM and libraries
  • From: "J.P. Roberts, MD" <jproberts@sprintmail.com>
• ATM PVC Pipe telescope body
  • From: "J.R.L." <lafountainj@sprintmail.com>
• Re: ATM Re: GPS time receiver (was Atomic Clock via SNTP)
  • From: jerry@cts4.europe.dg.com (j.royston)
• Re: ATM PIN photodiodes
  • From: jerry@cts4.europe.dg.com (j.royston)
• Re: ATM Global Positioning System
  • From: jerry@cts4.europe.dg.com (j.royston)
• Re: ATM Autres follies de Foucault (More Foucault Follies)
  • From: jerry@cts4.europe.dg.com (j.royston)
• Re: ATM Synching to atomic clock via SNTP...
  • From: "Jack Brindle" <jackb@ricochet.net>
• Re: ATM Atomic clock stuff...
  • From: "Jack Brindle" <jackb@ricochet.net>
• Re: ATM Global Positioning System
  • From: "Jack Brindle" <jackb@ricochet.net>
• Re: ATM Global Positioning System
  • From: "Jack Brindle" <jackb@ricochet.net>
• Re: ATM [OT] Y2K Dos for you computerized dob users.
  • From: "Jack Brindle" <jackb@ricochet.net>
• ATM It's the Daigonal, Stupid! .... again
  • From: Jack Schmidling <arf@mc.net>
• ATM Demist- informal survey
  • From: Jack Schmidling <arf@mc.net>
• ATM Demise of S&T
  • From: Jack Schmidling <arf@mc.net>
• ATM Re:Focuser Suggestions
  • From: James P Crombie <jpcrombie@pei.sympatico.ca>
• ATM O-T C-10 Schmit Camera
  • From: James P Crombie <jpcrombie@pei.sympatico.ca>
• ATM Re: Feathertouch
  • From: James P Crombie <jpcrombie@pei.sympatico.ca>
• ATM Scope page
  • From: James P Crombie <jpcrombie@pei.sympatico.ca>
• Re:ATM Fork mount bearings
  • From: James P Crombie <jpcrombie@pei.sympatico.ca>
• Rebuilding an old ATM Scope
  • From: James Paterson <paterson@ucalgary.ca>
• Re: Rebuilding an old ATM Scope
  • From: James Paterson <paterson@ucalgary.ca>
• Re: ATM Coma (was: beginners basic mirror question)
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Foucault Follies and Equilibration Anxieties
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• ATM Roger's mirror.
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Supplement to Foucault Follies
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Wavefront vs: slope error vs: RMS
  • From: "James W. Burrows" <burrjaw@halcyon.com>
• Re: ATM Laminated mirrors
  • From: jgmoreau@lino.com (Jean-Guy Moreau)
• Re: ATM Oh Crap, Need Advice
  • From: "Jean-Marc.Becker" <Jean-marc.Becker@wanadoo.fr>
• Re: ATM Progress on first mirror etc.
  • From: Jeff Klink <jklink@calwest.net>
• Re: ATM Synching to atomic clock via SNTP...
  • From: Jeff Medkeff <medkeff@c2i2.com>
• Re: ATM Synching to atomic clock via SNTP...
  • From: Jeff Medkeff <medkeff@c2i2.com>
• Re: ATM Atomic clock stuff...
  • From: Jeff Medkeff <medkeff@c2i2.com>
• Re: ATM and LIbRARIES
  • From: Jeff Medkeff <medkeff@c2i2.com>
• Re: ATM demise
  • From: Jeff Medkeff <medkeff@c2i2.com>
• Re: S&T and the State of ATMing
  • From: Jeff Medkeff <medkeff@c2i2.com>
• Re:ATM Horror stories
  • From: jeff.martin@ccmail.wpcorp.com.au
• Re:ATM Collimation question
  • From: jeff.martin@ccmail.wpcorp.com.au
• Re[2]: ATM Horror stories
  • From: jeff.martin@ccmail.wpcorp.com.au
• Re: ATM Davis California
  • From: "Jeffery C. Hudson" <jhudson@inreach.com>
• ATM RE PVC Pipe scope
  • From: "Jerry Rhodes" <jlrhod@bright.net>
• Re: ATM Focuser recommendation
  • From: "Jim Fly" <flyj@integrityonline12.com>
• Re: ATM Focuser recommendation (JMI)
  • From: "Jim Fly" <flyj@integrityonline12.com>
• ATM Binocular Reviews
  • From: "Jim Fly" <flyj@integrityonline12.com>
• ATM Fw: Mirror Cleaning Method
  • From: "Jim Fly" <flyj@integrityonline12.com>
• Re: re:ATM Opinions needed
  • From: "Jim Fly" <flyj@integrityonline12.com>
• ATM Re: Bino-viewers
  • From: "Jim Fly" <flyj@integrityonline12.com>
• ATM I need the Dakin Diagonal Offset Calculation Correction
  • From: "Jim Fly" <flyj@integrityonline12.com>
• Re: ATM I need the Dakin Diagonal Offset Calculation Correction
  • From: "Jim Fly" <flyj@integrityonline12.com>
• ATM Thanks for the Diagonal Offset Correction Info.
  • From: "Jim Fly" <flyj@integrityonline12.com>
• Re: ATM Newbie Focuser Question
  • From: "Jim Fly" <flyj@integrityonline12.com>
• Re: ATM PVC Pipe telescope body
  • From: "Jim Fly" <flyj@integrityonline12.com>
• Re: ATM PVC Pipe telescope body
  • From: "Jim Fly" <flyj@integrityonline12.com>
• Subject: ATM Bad Message
  • From: Jim Kluetz <jkluetz@dzn.com>
• Re: ATM beginners basic mirror question
  • From: "JoAnn Nanof" <hennypenny1@hotmail.com>
• Re: ATM Byers Still in Business
  • From: "JoAnn Nanof" <hennypenny1@hotmail.com>
• RE: ATM Coma
  • From: JoAnn Nanof <jnanof@yahoo.com>
• Re: ATM Making eyepieces
  • From: JoAnn Nanof <jnanof@yahoo.com>
• ATM mirror kits
  • From: JoAnn Nanof <jnanof@yahoo.com>
• Re: ATM Plate and pyrex polishing
  • From: JoAnn Nanof <jnanof@yahoo.com>
• Re: ATM Ronchi grids
  • From: JoAnn Nanof <jnanof@yahoo.com>
• Re: ATM demise
  • From: JoAnn Nanof <jnanof@yahoo.com>
• Re: ATM Astrophysics Olympiad
  • From: JoAnn Nanof <jnanof@yahoo.com>
• RE: ATM NEW 30 INCH FROM 1 INCH PLATE GLASS !
  • From: Joe Goins <jgoins@cedex.com>
• ATM re: University Optics Mirror Cell
  • From: John.D.Gallagher@Hitchcock.ORG (John D. Gallagher)
• Re: ATM Black Rouge (was Technique for smoothing)
  • From: John Garland <jgarland@morgan.ucs.mun.ca>
• ATM Re: atm-digest V1 #1409
  • From: John Jarosz <jjarosz@interaccess.com>
• Re: ATM Covering For Truss Tubes
  • From: John Vogt <atmer@idt.net>
• Re: ATM Need 1 RPH 12 volt motor
  • From: "Johnny Boy" <yojohn@apex.net>
• Re: ATM AL. Tubing
  • From: "Johnny Boy" <yojohn@apex.net>
• Re: ATM Making eyepieces
  • From: "Johnny Boy" <yojohn@apex.net>
• ATM Truss tubes - 4, 6, or 8?
  • From: "Jon Bertrand"<jonb@cirris.com>
• Re[2]: ATM Truss tubes - 4, 6, or 8?
  • From: "Jon Bertrand"<jonb@cirris.com>
• ATM My scope design - diag. size sound okay?
  • From: "Jon Bertrand"<jonb@cirris.com>
• ATM [OT] Y2K Dos for you computerized dob users.
  • From: "Jon Bertrand"<jonb@cirris.com>
• ATM demise
  • From: "Jon Bertrand"<jonb@cirris.com>
• [OT] S&T - ATM, crazy idea
  • From: "Jon Bertrand"<jonb@cirris.com>
• RE: S&T and the State of ATMing
  • From: "Jon Cooper" <jbcooper@gte.net>
• Re: ATM Black Rouge (was Technique for smoothing)
  • From: Jon Cooper <jbcooper@gte.net>
• ATM B.V.C. concerns
  • From: karen vanderhule <nitesite@lgcy.com>
• RE: ATM Online resources for gears
  • From: "Ken Carter" <kencar@kencar.simplenet.com>
• Re: ATM Picture of Parabolic Grinder
  • From: Ken Hunter <kb7h@cei.net>
• Re: ATM Picture of Parabolic Grinder
  • From: Ken Hunter <kb7h@cei.net>
• Re: ATM gear ratios
  • From: Ken Hunter <kb7h@cei.net>
• Re: ATM Astrophysics Olympiad
  • From: Ken Hunter <kb7h@cei.net>
• Re: ATM Focault Testing
  • From: Ken Hunter <kb7h@cei.net>
• Re: ATM Important, very important
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM O-T C-10 Schmit Camera
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Re: Rouge; better choice for novice? (was smoothing a small mirror)
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM drilling glass
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM: Where to position mirror heating element
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Black Rouge (was Technique for smoothing)
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM What size airline carryon?
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM mirror kits
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM NEW 30 INCH FROM 1 INCH PLATE GLASS !
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Ronchi grids
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Foucault Tester Photos Updated -Reply
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM's demise
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATMJ help
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATMJ Help, again
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Thirteen-inch "Travel Scope" Webpage
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Web resources Vs. traditional ones.
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: S&T and the State of ATMing
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM - Demise
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• Re: ATM Cradle Rings and things
  • From: Ken Lowther <s0109366@cc.ysu.edu>
• ATM Amature Telescope Making book
  • From: Ken Pryor <pryor@mmsi.com>
• Re: ATM NEWT question
  • From: ktullis@aztec.asu.edu (Ken Tullis)
• Re: S&T and the State of ATMing
  • From: Kenneth R Lilja <klilja@enteract.com>
• ATM Roller drive
  • From: Kenneth R Lilja <klilja@enteract.com>
• Re: ATM Need 1 RPH 12 volt motor
  • From: Kevin McCarthy <sigma@mediaone.net>
• Re: ATM First project ( (NOT even a) Bit off too much? )
  • From: Kevin McCarthy <sigma@mediaone.net>
• Re: ATM TDE Mask
  • From: Kevin McCarthy <sigma@mediaone.net>
• Re: ATM First project ( (NOT even a) Bit off too much? )
  • From: Kevin McCarthy <sigma@mediaone.net>
• Re: ATM Truss tubes - 4, 6, or 8?
  • From: Kevin McCarthy <sigma@mediaone.net>
• Re: ATM drilling glass
  • From: Kevin McCarthy <sigma@mediaone.net>
• Re: ATM broken glass=broken dream??
  • From: Kevin McCarthy <sigma@mediaone.net>
• Re: ATM Newport's plate glass tools.
  • From: Kevin McCarthy <sigma@mediaone.net>
• Re: ATM Ronchi grids
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• SV: ATM Calculating Newtonian diagonal size
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• ATM Flexure modeling software?
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• Re: ATM demise (a philosohpical look at one astronomy club that is stagnant)
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• ATM Equatorial platform - first impressions!
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• re:more newbie ATM questions
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• ATM RE: Equatorial Platforms
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• Re: ATM refractor focuser help
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• Re: ATM Compact Reflector Designing
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• ATM Mel's stepper circuit, a question
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• RE: ATM RE: Equatorial Platforms
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• ATM RE: Equatorial Platforms
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• ATM RE: Equatorial Platforms
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• ATM RE Mirror testing
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• Re: ATM Cradle Rings and things
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• Re: ATM stiffness requirements for truss tubes
  • From: Krajci Tom Maj Det 5 <krajci.tom@barksdale.af.mil>
• ATM drilling glass
  • From: Kreig McBride <kmcbride@memes.com>
• ATM Telescope/Optics Workshop
  • From: Kreig McBride <kmcbride@memes.com>
• ATM telescope/Optics Workshop (oops)
  • From: Kreig McBride <kmcbride@memes.com>
• Re: ATM My project almost destroyed
  • From: "Kristopher K. Barrett" <kbarrett@spiritone.com>
• ATM First project ( Bit off too much? )
  • From: "Kristopher K. Barrett" <kbarrett@spiritone.com>
• Re: ATM First project ( (NOT even a) Bit off too much? )
  • From: "Kristopher K. Barrett" <kbarrett@spiritone.com>
• Re: ATM First project ( (NOT even a) Bit off too much? )
  • From: "Kristopher K. Barrett" <kbarrett@spiritone.com>
• Re: ATM Return of the Newbie.... Pitch question
  • From: "Kristopher K. Barrett" <kbarrett@spiritone.com>
• Re: ATM First project ( (NOT even a) Bit off too much? )
  • From: "Kristopher K. Barrett" <kbarrett@spiritone.com>
• Re: ATM Beginner questions
  • From: "Kristopher K. Barrett" <kbarrett@spiritone.com>
• Re: ATM Complete Mirror Kit
  • From: "Kristopher K. Barrett" <kbarrett@spiritone.com>
• Re: ATM broken glass=broken dream??
  • From: "Kristopher K. Barrett" <kbarrett@spiritone.com>
• Re: ATM Full thickness 16" mirror question
  • From: "Kristopher K. Barrett" <kbarrett@spiritone.com>
• Re: ATM and LIbRARIES
  • From: Kyle Barger <kbarger@navpoint.com>
• Re: ATM AL. Tubing
  • From: Larry Manuel <lmanuel@sprint.ca>
• conspiracy theory of ATMs undermining large telescope companies' profits
  • From: Larry Manuel <lmanuel@sprint.ca>
• ATM "The Glass Giant of Palomar"
  • From: Larry Manuel <lmanuel@sprint.ca>
• ATM Web resources Vs. traditional ones.
  • From: Larry Manuel <lmanuel@sprint.ca>
• ATMs make lenses, too.
  • From: Larry Manuel <lmanuel@sprint.ca>
• Re: ATM Flexible dew shield
  • From: Larry Manuel <lmanuel@sprint.ca>
• Re: ATM refractor focuser help
  • From: Larry Manuel <lmanuel@sprint.ca>
• ATM Calculating Newtonian diagonal size
  • From: "Larry Snyder" <ldsnyder@dcn.davis.ca.us>
• Re: SV: ATM Calculating Newtonian diagonal size
  • From: "Larry Snyder" <ldsnyder@dcn.davis.ca.us>
• Re: ATM Davis California
  • From: lindberg <lindberg@olywa.net>
• Re: ATM continually working MOT
  • From: lindberg <lindberg@olywa.net>
• ATM Re: Rouge; better choice for novice? (was smoothing a small mirror)
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Truss tubes - 4, 6, or 8?
  • From: lindberg <lindberg@olywa.net>
• Re: ATM My scope design - diag. size sound okay?
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Beginner questions
  • From: lindberg <lindberg@olywa.net>
• Re: Experimental ATM
  • From: lindberg <lindberg@olywa.net>
• Re: SV: Experimental ATM
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Complete Mirror Kit
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Quadrant Lap
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Beginner questions
  • From: lindberg <lindberg@olywa.net>
• Re: SV: Re[2]: ATM Truss tubes - 4, 6, or 8?
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Black Rouge (was Technique for smoothing)
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Newbie grinding question, contact problem
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Newbie trying to Polish
  • From: lindberg <lindberg@olywa.net>
• Re: More experimental ATM
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Black Rouge (was Technique for smoothing)
  • From: lindberg <lindberg@olywa.net>
• Re: Rebuilding an old ATM Scope
  • From: lindberg <lindberg@olywa.net>
• Re: ATM broken glass=broken dream??
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Collimation question
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Black Rouge (was Technique for smoothing)
  • From: lindberg <lindberg@olywa.net>
• Re: ATM mirror kits
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Ronchi grids
  • From: lindberg <lindberg@olywa.net>
• Re: ATM flaw found in fine grinding
  • From: lindberg <lindberg@olywa.net>
• ATM Coatings-Advice Requested
  • From: lindberg <lindberg@olywa.net>
• Re: ATM correcting aberrat.
  • From: lindberg <lindberg@olywa.net>
• Re: ATMer's: I need figuring lap sizes
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Autres follies de Foucault (More Foucault Follies)
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Polishing 8" and not sure whats up..
  • From: lindberg <lindberg@olywa.net>
• ATM Flats and Polishing Pads
  • From: lindberg <lindberg@olywa.net>
• ATM Tyro questions
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Web resources Vs. traditional ones.
  • From: lindberg <lindberg@olywa.net>
• Re: ATM - Polishing Pads
  • From: lindberg <lindberg@olywa.net>
• ATM Quartz Newtonian secondary
  • From: lindberg <lindberg@olywa.net>
• Re: ATM RE Mirror testing
  • From: lindberg <lindberg@olywa.net>
• Re: ATM Another Tile question
  • From: lindberg <lindberg@olywa.net>
• ATM Collimation question
  • From: osthill@htc.net (Lisa Flaum)
• Re: ATM Global Positioning System
  • From: "Loren A. Busch" <LBusch@ix.netcom.com>
• ATM Plastic Cement
  • From: "luis garcia" <igusus@hotmail.com>
• ATM correcting aberrat.
  • From: "Luis Hontoria Hernández" <HONTORIA@santandersupernet.com>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@system.missouri.edu>
• Re: ATM Global Positioning System
  • From: Malcolm Macdonald <toliman@wave.co.nz>
• Re: ATMer's: I need figuring lap sizes
  • From: Malcolm Macdonald <toliman@wave.co.nz>
• ATM Bad messages
  • From: Malcolm Purves <malcolm.purves@which.net>
• ATM Synching to atomic clock via SNTP...
  • From: malsing@borg.ae.usr.com
• ATM Atomic clock stuff...
  • From: malsing@borg.ae.usr.com
• ATM Atomic clock/GPS stuff...
  • From: malsing@borg.ae.usr.com
• Re: ATM removing a siliconed secondary
  • From: "Marc Mandel" <mmandel@usd.edu>
• Re: ATM Cradle Rings and things
  • From: "Marinus van der Lugt" <marinus@lugt.freeserve.co.uk>
• Re: ATM Synching to atomic clock via SNTP...
  • From: Mark Alsing <malsing@borg.ae.usr.com>
• Re: ATM Synching to atomic clock via SNTP...
  • From: Mark Alsing <malsing@borg.ae.usr.com>
• Re: ATM Atomic clock/GPS stuff...
  • From: Mark Taylor <mctaylor@mindspring.com>
• Re: ATM Re: GPS time receiver (was Atomic Clock via SNTP)
  • From: "Mark VandeWettering" <markv@pixar.com>
• Re: ATM Making eyepieces
  • From: "Mark VandeWettering" <markv@pixar.com>
• ATM Re: PVC telescope tubes
  • From: bj712@scn.org (Mark Zemanek)
• ATM Fork mount bearings
  • From: Martin Suchomel <suchomel_m@brn.pvtnet.cz>
• RE: ATM Drive Corrector (need plans)
  • From: "Mathew Marulla" <atm@tiac.net>
• [OT]Re: ATM postcard
  • From: "Matt Considine" <mconsidine@wesleyan.edu>
• ATM image intensified astronomy
  • From: Matt Devine <mdevine@nuera.com>
• ATM Fwd: Bino-viewers
  • From: Mattunes@aol.com
• ATM Focault Testing
  • From: "Meeks, Robert" <RFMeeks@epicsolutions.com>
• ATM RE: Focault Testing
  • From: "Meeks, Robert" <RFMeeks@epicsolutions.com>
• Re: ATM Shrouds still have a purpose
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Building a Waineo grinding machine
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Mirror weights
  • From: Mel Bartels <mbartels@efn.org>
• ATM mirror mirror on the wall
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM continually working MOT
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM continually working MOT
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Truss tubes - 4, 6, or 8?
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Filling truss tubes
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: Bino-viewers]
  • From: Mel Bartels <mbartels@efn.org>
• ATM message from list owner - ads not allowed
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Global Positioning System
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Full thickness 16" mirror question
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Re: CeO vs. Rouge
  • From: Mel Bartels <mbartels@efn.org>
• ATM new 30" from 1" thick plate glass
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Self positioning telescope (was GPS)
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM image intensified astronomy
  • From: Mel Bartels <mbartels@efn.org>
• ATM Re: Computerized Dob
  • From: Mel Bartels <mbartels@efn.org>
• ATM !?
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM NEW 30 INCH FROM 1 INCH PLATE GLASS !
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Very Thin Mirrors -- a Plan
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Plate and pyrex polishing
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Lost messages
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Stroke Question
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Foucault Follies and Equilibration Anxieties
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Help! Dobsonian history!
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Slewing Speed
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Autres follies de Foucault (More Foucault Follies)
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [epabcc@assf00.epa.ericsson.se (Bratislav Curcic)]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATMJ help
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM's demise
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATMJ help
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Double Ronchi Tester
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM gear ratios
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Thirteen-inch "Travel Scope" Webpage
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM demise
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: BOUNCE atm@shore.net: Non-member submission from [ARBPJBJLB@aol.com]]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Must mirror-back be flat?
  • From: Mel Bartels <mbartels@efn.org>
• ATM [Fwd: Advice please.]
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Thirteen-inch "Travel Scope" Webpage
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM TEX and Star Test Agree!
  • From: Mel Bartels <mbartels@efn.org>
• Re: "ATM demise" via CCD?? and more!
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM TEX and Star Test Agree!
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM RE: Equatorial Platforms
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM SCT Cooling Fan
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM SCT Cooling Fan
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Roller drive
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM RE: Equatorial Platforms
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATMJ Help, again
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Pitch lap shelf life?
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Mel's stepper circuit, a question
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM beginners basic mirror question
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• RE:ATM near disaster
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Important, very important
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Sticky Pitch
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM beginners basic mirror question
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: Re[2]: ATM beginners basic mirror question
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Message composition, was ATM Bad messages
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Return of the Newbie.... Pitch question
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Hogging and tile tools
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• RE: ATM Coma
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Beginner questions
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM drilling glass
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Progress on first mirror etc.
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Progress on first mirror etc.
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Newbie trying to Polish
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Silvering methods
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• ATM Clausing
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• ATM Horror stories
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Re: CeO vs. Rouge
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• ATM Silvering Techniques
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Silvering Techniques
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM mirror kits
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM RE: rouge vs. CeO
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Oh Crap, Need Advice
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Camera Cable Thread Pitch
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• re:Re: ATM RE: rouge vs. CeO
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM flaw found in fine grinding
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Plate and pyrex polishing
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Re: CeO vs. Rouge
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM's demise
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• Re: ATM Tiny scratch - Polish or regrind?
  • From: "Michael J. Coslo" <mjc5@psu.edu>
• An ATM List Thank You!
  • From: "Michael J. Wolford" <mwolford@ccrtc.com>
• ATM Demise--informal survey
  • From: mkoloski@oregonvos.net (Michael Koloski)
• ATM Informal survey--Report
  • From: mkoloski@oregonvos.net (Michael Koloski)
• ATM Question on eyepieces????
  • From: mkoloski@oregonvos.net (Michael Koloski)
• Re: ATM beginners basic mirror question
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM Ready to build - Where to Buy
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM Conclusions
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM New to this list and Couder masks
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: Subject: ATM Bad Message
  • From: "Michael P. Lindner" <mikel@att.net>
• ATM Holographic finder
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM First project ( (NOT even a) Bit off too much? )
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM First project ( (NOT even a) Bit off too much? )
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM metric units
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM Beginner questions
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM secondaries shadow
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM secondaries shadow
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM Making eyepieces
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM Optical coating companies
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM Foucault Tester Photos Updated -Reply
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM Foucault Tester Photos Updated -Reply
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM University Optics
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM Cradle Rings and things
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM RE Mirror testing
  • From: "Michael P. Lindner" <mikel@att.net>
• Re: ATM RE: rouge vs. CeO
  • From: papilio1@juno.com (Michael Pankratz)
• Re: ATM Kitchen Table Interferometry
  • From: papilio1@juno.com (Michael Pankratz)
• ATM New lens design book from Willmann-Bell
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: ATMJ Help, again
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: ATMJ Help, again
  • From: Michael Peck <mpeck1@ix.netcom.com>
• ATM Lapper 12
  • From: Michael Pendley <mycall@rt66.com>
• ATM Laminated mirrors
  • From: "Michael Perata" <michaelp@p-solutions.com>
• RE: ATM Re: PVC telescope tubes
  • From: "Michael Perata" <michaelp@p-solutions.com>
• RE: ATM Re: PVC telescope tubes
  • From: "Michael Perata" <michaelp@p-solutions.com>
• RE: ATM Re: PVC telescope tubes
  • From: "Michael Perata" <michaelp@p-solutions.com>
• RE: ATM Re: PVC telescope tubes
  • From: "Michael Perata" <michaelp@p-solutions.com>
• Re: Re[2]: ATM beginners basic mirror question
  • From: "Michael Perata @ p-solutions" <michaelp@p-solutions.com>
• Re: ATM Filling truss tubes
  • From: Mike Burdoo <mburdoo@azstarnet.com>
• Re: ATM Horror stories
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM Sources for tester plans
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM Figuring Question, looks like a volcano!
  • From: Mike Coslo <mjc5@psu.edu>
• Re: S&T and the State of ATMing
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM demise
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM Must mirror-back be flat?
  • From: Mike Coslo <mjc5@psu.edu>
• Re: S&T and the State of ATMing
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM demise (a philosohpical look at one astronomy club that i s stagnant)
  • From: Mike Coslo <mjc5@psu.edu>
• Re: ATM Focuser recommendation (JMI)
  • From: MitchAlsup@aol.com
• ATM Nagler field stops
  • From: MitchAlsup@aol.com
• Re: ATM Nagler field stops
  • From: MitchAlsup@aol.com
• Re: ATM RE: Equatorial Platforms -Reply
  • From: Ned Smith <SMITHN00@dcor.state.ga.us>
• ATM Mel's stepper circuit, a question -Reply
  • From: Ned Smith <SMITHN00@dcor.state.ga.us>
• ATM Fun With Focusers
  • From: NGC704@aol.com
• ATM Fun With Focusers
  • From: NGC704@aol.com
• Re: ATM mirror kits
  • From: NGC704@aol.com
• Re: ATM - Starry Messanger-- the final insult
  • From: NGC704@aol.com
• ATM Another Tile question
  • From: NGC704@aol.com
• Re: ATM Another Tile question
  • From: NGC704@aol.com
• Re: ATM Adler Planetarium --
  • From: Nick Liepins <nliepins@willamette.edu>
• SV: ATM Foucault Simulator
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Hogging and tile tools
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Experimental ATM
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: Experimental ATM
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Beginner questions
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM lens
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM RE: DIFFRACTION AND SECONDARY SHADOW
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM secondaries shadow
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: Re[2]: ATM Truss tubes - 4, 6, or 8?
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM RE: DIFFRACTION AND SECONDARY SHADOW
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• More experimental ATM
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM RE: DIFFRACTION AND SECONDARY SHADOW
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• ATM Re: DIFFRACTION AND SECONDARY SHADOW
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Collimation question
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM recoating EP
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Calculating Newtonian diagonal size.
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Calculating Newtonian diagonal size.
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: SV: ATM Calculating Newtonian diagonal size.
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• ATM EP distortion - was Calculating Newtonian diagonal size.
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM EP distortion - was Calculating Newtonian diagonal size.
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• SV: ATM Supplement to Foucault Follies
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re: ATM Foucault Tester Photos Updated
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• Re: ATM's demise/further information
  • From: "Nils Olof Carlin" <nilsolof.carlin@swipnet.se>
• ATM Cradle Rings and things
  • From: paterson@ucalgary.ca
• Re: ATM Cradle Rings and things
  • From: paterson@ucalgary.ca
• ATM Balance and Dec drives
  • From: paterson@ucalgary.ca
• ATM remove
  • From: "Paul E. Zacharias" <graphics@bitstorm.net>
• Re: ATM Byers Still in Business
  • From: "Paul Hettrick" <P.Hettrick@bom.gov.au>
• Re: ATM metric units
  • From: "Paul Hettrick" <P.Hettrick@bom.gov.au>
• Re: ATM Silvering Techniques
  • From: "Paul Hettrick" <P.Hettrick@bom.gov.au>
• Re: ATM AL. Tubing
  • From: "Paul Moat" <paulmoat@email.msn.com>
• ATM Online resources for gears
  • From: "Paul Moat" <paulmoat@email.msn.com>
• ATM Gear Reduction
  • From: "Paul Moat" <paulmoat@email.msn.com>
• ATM Slewing Speed
  • From: "Paul Moat" <paulmoat@email.msn.com>
• ATM gear ratios
  • From: "Paul Moat" <paulmoat@email.msn.com>
• ATM University Optics
  • From: "Paul Moat" <paulmoat@email.msn.com>
• Re: ATM University Optics
  • From: "Paul Moat" <paulmoat@email.msn.com>
• Re: ATM Source for diamond bandsaw blades?
  • From: "Pete Koziar" <pete.koziar@baltsun.com>
• ATM Progress on first mirror etc.
  • From: "Pete Koziar" <pete.koziar@baltsun.com>
• Re: ATM LED Brightness, was Sources for tester plans
  • From: "Pete Koziar" <pete.koziar@baltsun.com>
• ATM Air-spaced Cooke triplet as eyepiece
  • From: "Pete Koziar" <pete.koziar@baltsun.com>
• Re: ATM Byers Still in Business
  • From: Peter <kitgears@kitgear.com>
• ATMJ help
  • From: Peter Abrahams <telscope@europa.com>
• S&T and the State of ATMing
  • From: Peter Abrahams <telscope@europa.com>
• S&T and the State of ATMing
  • From: Peter Abrahams <telscope@europa.com>
• "ATM demise" via CCD??
  • From: Peter Abrahams <telscope@europa.com>
• ATM S & T, continued
  • From: Peter Abrahams <telscope@europa.com>
• ATM Re: GPS time receiver (was Atomic Clock via SNTP)
  • From: Peter C Chen <chen@stars.gsfc.nasa.gov>
• ATM Self positioning telescope (was GPS)
  • From: Peter C Chen <chen@stars.gsfc.nasa.gov>
• Re: ATM Re: atm-digest V1 #1411
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• ATM Source for diamond bandsaw blades?
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• ATM Amazingglazing; was: diamond blades?
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• ATM: Diamond bandsaw--semi final chapter
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM update on my activities
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM LED Brightness, was Sources for tester plans
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM Need address
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: more newbie ATM questions
  • From: "Peter D. Brooks" <pdbrooks@pacbell.net>
• Re: ATM First project ( (NOT even a) Bit off too much? )
  • From: notpete@scn.org (Peter Hirtle)
• re:ATM Foucault telescope lense?
  • From: notpete@scn.org (Peter Hirtle)
• Re: ATM Must mirror-back be flat?
  • From: notpete@scn.org (Peter Hirtle)
• Re: ATM Full thickness 16" mirror question
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM Calculating Newtonian diagonal size.
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM Calculating Newtonian diagonal size.
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: SV: ATM Calculating Newtonian diagonal size.
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM EP distortion - was Calculating Newtonian diagonal size.
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM EP distortion - was Calculating Newtonian diagonal size.
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM's demise
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• Re: ATM Picture of Parabolic Grinder
  • From: "PETER JOHN SMITH" <pjifl@bigpond.com>
• ATM: Where to position mirror heating element
  • From: "Pettinati, Fabio" <Fabio@vsisinc.com>
• Re: ATM CCD Devices
  • From: "Poul Linnet" <kam1842@vip.cybercity.dk>
• Re: ATM CCD Devices
  • From: "Poul Linnet" <kam1842@vip.cybercity.dk>
• RE: ATM FWD: Bino-viewers
  • From: Pshankland@flakeysol.com
• RE: ATMJ Help
  • From: Pshankland@flakeysol.com
• RE: ATM Demise of S&T
  • From: Pshankland@flakeysol.com
• ATM Re: atm-digest V1 #1409
  • From: psmc@ix.netcom.com
• ATM New to this list and Couder masks
  • From: PUMPS987@aol.com
• ATM focault tester use
  • From: Quiz <jimquiz@earthlink.net>
• ATM Oh Crap, Need Advice
  • From: Quiz <jimquiz@earthlink.net>
• Re: ATM Oh Crap, Need Advice
  • From: Quiz <jimquiz@earthlink.net>
• ATM Tiny scratch - Polish or regrind?
  • From: Quiz <jimquiz@earthlink.net>
• ATM Double Ronchi Tester
  • From: Quiz <jimquiz@earthlink.net>
• ATM focault testing
  • From: Quiz <jimquiz@earthlink.net>
• ATM Pitch lap shelf life?
  • From: Ray Jurevicius <rjurevicius@execpc.com>
• ATM Thirteen-inch "Travel Scope" Webpage
  • From: Raycash@aol.com
• Re: ATM Thirteen-inch "Travel Scope" Webpage
  • From: Raycash@aol.com
• Re: ATM Thirteen-inch "Travel Scope" Webpage
  • From: Raycash@aol.com
• Re: ATM Thirteen-inch "Travel Scope" Webpage
  • From: Raycash@aol.com
• Re: ATM Thirteen-inch "Travel Scope" Webpage
  • From: Raycash@aol.com
• Re: ATM Ray's Travel Scope
  • From: Raycash@aol.com
• Re: ATM Thirteen-inch "Travel Scope" Webpage
  • From: Raycash@aol.com
• Re: ATM Thirteen-inch "Travel Scope" Webpage
  • From: Raycash@aol.com
• Re: ATM demise
  • From: "RCWalker" <rcwalker@uswest.net>
• ATM Offner-big mirror null test
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• ATM Offner -big mirror null test 2
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Offner-big mirror null test
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Re: GPS time receiver (was Atomic Clock via SNTP)
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Re: GPS time receiver (was Atomic Clock via SNTP)
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Offner-big mirror null test
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Full thickness 16" mirror question
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Full thickness 16" mirror question
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• ATM Offner -null test
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Very Thin Mirrors -- a Plan
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Supplement to Foucault Follies
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM's demise
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Foucault Testing
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM Foucault Testing
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• ATM Re: Fringes - (was Foc.testing)
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• ATM Fringes - update
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM professional vs. amateur optics
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM TEX and Star Test Agree!
  • From: Ric Rokosz <bz737@freenet.toronto.on.ca>
• Re: ATM continually working MOT
  • From: Ricardo Dunna <rdunna@infolink.com.br>
• ATM Shadowgrams
  • From: Ricardo Dunna <rdunna@infolink.com.br>
• ATM Question re: University Optics Mirror Cell
  • From: "Richard Ozer" <rozer@ousd.k12.ca.us>
• ATM Newbie Focuser Question
  • From: "Richard Ozer" <rozer@ousd.k12.ca.us>
• Re: ATM PVC Pipe telescope body
  • From: "Richard Ozer" <rozer@ousd.k12.ca.us>
• RE: ATMJ help
  • From: rozer@ousd.k12.ca.us (Richard Ozer)
• ATM Davis California
  • From: Richard Schwartz <richas@idt.net>
• ATM Capitalist
  • From: Richard Schwartz <richas@idt.net>
• ATM Meade Telescopes
  • From: Richard Schwartz <richas@idt.net>
• ATM - Astig and MOT
  • From: Richard Schwartz <richas@idt.net>
• ATM Terracotta
  • From: Richard Schwartz <richas@idt.net>
• ATM - More on Meade
  • From: Richard Schwartz <richas@idt.net>
• ATM Re: atm-digest V1 #1411
  • From: Richard Schwartz <richas@idt.net>
• ATM and LIbRARIES
  • From: Richard Schwartz <richas@idt.net>
• ATM - Starry Messanger-- the final insult
  • From: Richard Schwartz <richas@idt.net>
• ATM - Re:Re: ATMJ help
  • From: Richard Schwartz <richas@idt.net>
• ATM - Meade Progress
  • From: Richard Schwartz <richas@idt.net>
• ATM [Fwd: Durability]
  • From: Richard Schwartz <richas@idt.net>
• ATM - Demise
  • From: Richard Schwartz <richas@idt.net>
• ATM Newport's plate glass tools.
  • From: Richard Schwartz <richas@idt.net>
• ATM Pitch lap shelf life?
  • From: Richard Schwartz <richas@idt.net>
• Re: ATM I need your help, guys!
  • From: RICHARDBAL@aol.com
• ATM (no subject)
  • From: RICHARDBAL@aol.com
• ATM Silicon on mirror face
  • From: RICHARDBAL@aol.com
• ATM Must mirror-back be flat?
  • From: RICHARDBAL@aol.com
• ATM Bausch and Lomb 4000
  • From: Rob Wohleb <rhw1@axe.humboldt.edu>
• Re: ATM Large Slevogt Camera Mount
  • From: Robert Duvall <rduvall@jlc.net>
• Re: ATM Sources for tester plans
  • From: Robert Duvall <rduvall@jlc.net>
• Re: ATM Oh Crap, Need Advice
  • From: Robert Duvall <rduvall@jlc.net>
• Re: ATM NEW 30 INCH FROM 1 INCH PLATE GLASS !
  • From: Robert Duvall <rduvall@jlc.net>
• Re: ATM (no subject)
  • From: Robert Duvall <rduvall@jlc.net>
• Re: ATM Sources for tester plans
  • From: Robert Duvall <rduvall@jlc.net>
• ATM Foucault Tester Photos Updated
  • From: Robert Duvall <rduvall@jlc.net>
• Re: ATM Foucault Tester Photos Updated -Reply
  • From: Robert Duvall <rduvall@jlc.net>
• Re: ATM better result with slitless tester ?
  • From: Robert Duvall <rduvall@jlc.net>
• Re: ATM Need 1 RPH 12 volt motor
  • From: Robert Haler <rhaler@lymax.com>
• Re: ATM Need 1 RPH 12 volt motor CORRECTION
  • From: Robert Haler <rhaler@lymax.com>
• Re: ATM removing a siliconed secondary
  • From: Robert Haler <rhaler@lymax.com>
• ATM Ceravolo's Interferometry Cookbook
  • From: Robert Haler <rhaler@lymax.com>
• ATM Kitchen Table Interferometry
  • From: Robert Haler <rhaler@lymax.com>
• ATM Re: Kitchen Interferometry
  • From: Robert Haler <rhaler@lymax.com>
• ATM SCT Cooling Fan
  • From: Robert Haler <rhaler@lymax.com>
• ATM SCT Cooling Fan
  • From: Robert Haler <rhaler@lymax.com>
• ATM Optical coating companies
  • From: "Robert Midiri" <Robert.Midiri@mail.tju.edu>
• Re: ATM demise
  • From: "Robert Midiri" <Robert.Midiri@mail.tju.edu>
• Re: ATM Sticky Pitch
  • From: Rod Brackenridge <rjb@netconnect.com.au>
• Re: ATM Sticky Pitch
  • From: Rod Brackenridge <rjb@netconnect.com.au>
• Re: ATM removing a siliconed secondary
  • From: "Rodger Petersen" <faintfuzzy@worldnet.att.net>
• ATM Re: CeO vs. Rouge
  • From: Roger Ceragioli <rogerc@dakotacom.net>
• ATM RE: rouge vs. CeO
  • From: Roger Ceragioli <rogerc@dakotacom.net>
• ATM Foucault Follies and Equilibration Anxieties
  • From: Roger Ceragioli <rogerc@dakotacom.net>
• ATM Autres follies de Foucault (More Foucault Follies)
  • From: Roger Ceragioli <rogerc@dakotacom.net>
• ATM Supplement to Foucault Follies
  • From: Roger Ceragioli <rogerc@dakotacom.net>
• ATM TEX and Star Test Agree!
  • From: Roger Ceragioli <rogerc@dakotacom.net>
• Re: ATM TEX and Star Test Agree!
  • From: Roger Ceragioli <rogerc@dakotacom.net>
• ATM Re: Foucault Testing
  • From: Roger Ceragioli <rogerc@dakotacom.net>
• ATM More Equilibration Escapades
  • From: Roger Ceragioli <rogerc@dakotacom.net>
• Re: ATM Compact Reflector Designing
  • From: Roger Ceragioli <rogerc@dakotacom.net>
• Re: ATM's demise
  • From: Ross Orr/Margaret Wong <rotohut@ic.net>
• Re: ATM Bad Messages
  • From: Ross_Dawson@county.com.au
• Re: ATM mirror kits
  • From: Ross_Dawson@county.com.au
• ATM Pennies for Alice
  • From: rudy@cae.ca (Rudy Taraschi)
• Re: ATM What size airline carryon?
  • From: "Ryan" <atmryan@excite.com>
• Re: ATM Sources for tester plans
  • From: "Ryan Hess" <atmryan@excite.com>
• ATM Telescope "renovating"
  • From: "Ryan Hess" <atmryan@excite.com>
• Re: ATM Telescope "renovating"
  • From: "Ryan Hess" <atmryan@excite.com>
• ATMer's: I need figuring lap sizes
  • From: "Ryan Hess" <atmryan@excite.com>
• Re: ATMer's: I need figuring lap sizes
  • From: "Ryan Hess" <atmryan@excite.com>
• ATM Figuring stuff
  • From: "Ryan Hess" <atmryan@excite.com>
• ATM The project is on it's way
  • From: "Ryan Hess" <atmryan@excite.com>
• ATM: [OT] Eyepiece preferences
  • From: "Ryan Hess" <atmryan@excite.com>
• ATM Sources for tester plans
  • From: ryan.h@excite.com
• RE: ATM - Starry Messanger best wishes
  • From: "Scordato, Thomas" <TSCORDA@alleghenypower.com>
• Re: ATM Adler Planetarium --
  • From: Scott Berfield <berfield@pacbell.net>
• ATM continually working MOT
  • From: "Scott Hahn" <HahnST@worldnet.att.net>
• Re: ATM continually working MOT
  • From: "Scott Hahn" <HahnST@worldnet.att.net>
• ATM removing a siliconed secondary
  • From: "Scott Hahn" <HahnST@worldnet.att.net>
• ATM placement of a secondary mirror
  • From: "Scott Hahn" <HahnST@worldnet.att.net>
• ATM a couple fine grinding questions
  • From: "Scott Hahn" <HahnST@worldnet.att.net>
• ATM Flexible dew shield
  • From: "Scott Hahn" <HahnST@worldnet.att.net>
• Re: "ATM demise" via CCD?? and more!
  • From: "Scott Hahn" <HahnST@worldnet.att.net>
• ATM Silvering methods
  • From: "Scott Marsh" <smarsh@geocities.com>
• Re: ATM Black Rouge (was Technique for smoothing)
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• Re: ATM Black Rouge (was Technique for smoothing)
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• Re: ATM NEW 30 INCH FROM 1 INCH PLATE GLASS !
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• ATM Ronchi grids
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• ATM Ronchi gratings revisited
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• Re: ATM Golding?
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• Re: ATM Foucault Follies and Equilibration Anxieties
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• ATM - Fixing Magellan I on an Equatorial Mount
  • From: "Shahrin Haji Ahmad" <shah7475@tm.net.my>
• ATM TDE Mask
  • From: SHANE LAPIERRE <SLAPIERR@bcbsct.com>
• ATM TDE Mask--> I Want to Refigure Mirror
  • From: SHANE LAPIERRE <SLAPIERR@bcbsct.com>
• ATM Complete Mirror Kit
  • From: SHANE LAPIERRE <SLAPIERR@bcbsct.com>
• ATM Foucault Tester Photos Updated -Reply
  • From: SHANE LAPIERRE <SLAPIERR@bcbsct.com>
• ATM Foucault Tester Photos Updated -Reply
  • From: SHANE LAPIERRE <SLAPIERR@bcbsct.com>
• ATM Foucault Tester Photos Updated -Reply
  • From: SHANE LAPIERRE <SLAPIERR@bcbsct.com>
• Re: ATMJ help -Reply
  • From: SHANE LAPIERRE <SLAPIERR@bcbsct.com>
• Re: ATMJ Help, again
  • From: SHANE LAPIERRE <SLAPIERR@bcbsct.com>
• ATM Ceramic Tile question
  • From: SHANE LAPIERRE <SLAPIERR@bcbsct.com>
• ATM RE: DIFFRACTION AND SECONDARY SHADOW
  • From: "Sidor . Kurt" <KSidor@drc.com>
• ATM RE:Diffraction and Secondary Shadow
  • From: "Sidor . Kurt" <KSidor@drc.com>
• ATM Steppers
  • From: "simone santini" <ik5ntf@hotmail.com>
• ATM 12 V AC Power supply for Camtrak ??
  • From: Sofjan@aol.com
• Re: ATM beginners basic mirror question
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM beginners basic mirror question
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM beginners basic mirror question
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM beginners basic mirror question
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM beginners basic mirror question
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• ATM Coma (was: beginners basic mirror question)
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Hogging and tile tools
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• ATM Coma
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• ATM Light and Colour (was: Coma)
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Horror stories
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Camera Cable Thread Pitch
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: S&T and the State of ATMing
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: S&T and the State of ATMing
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• ATM Wanted: UK source for Krylon
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Re: atm-digest V1 #1436
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Flexible dew shield
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Correction of List Errors (was: ATM Demise of S&T)
  • From: Stephen Tonkin <sft@aegis1.demon.co.uk>
• Re: ATM Foucault Simulator
  • From: Stuart Field <field@lamar.Colostate.EDU>
• Re: ATM beginners basic mirror question
  • From: Stuart Field <field@lamar.Colostate.EDU>
• Re: ATM beginners basic mirror question
  • From: Stuart Field <field@lamar.Colostate.EDU>
• Re: ATM beginners basic mirror question
  • From: Stuart Field <field@lamar.Colostate.EDU>
• Re: ATM Coma (was: beginners basic mirror question)
  • From: Stuart Field <field@lamar.Colostate.EDU>
• Re: ATM HYPERBOLA
  • From: Stuart Field <field@lamar.Colostate.EDU>
• Re: ATM Atomic clock stuff...
  • From: Stuart Field <field@lamar.Colostate.EDU>
• Re: ATM secondaries shadow
  • From: Stuart Field <field@lamar.Colostate.EDU>
• ATM RE: DIFFRACTION AND SECONDARY SHADOW
  • From: Stuart Field <field@lamar.Colostate.EDU>
• Re: ATM Global Positioning System
  • From: Stuart Field <field@lamar.Colostate.EDU>
• No Subject
  • From: "Sumira Jaya" <sumira@hotmail.com>
• Re: ATM Horror stories
  • From: tasimmons@west.raytheon.com
• Re: ATM Silvering Techniques
  • From: "Thomas O'Hara, PhD" <ohara@azstarnet.com>
• Re: ATM Fwd: Bino-viewers
  • From: "Thomas O'Hara, PhD" <ohara@azstarnet.com>
• Re: ATM Compact Dobson
  • From: "Thomas O'Hara, PhD" <ohara@azstarnet.com>
• ATM INFORMACÍON EN ESPAÑOL, y'all...
  • From: "Thomas O'Hara, PhD" <ohara@azstarnet.com>
• Re: ATM: [OT] Eyepiece preferences
  • From: "Thomas O'Hara, PhD" <ohara@azstarnet.com>
• ATM Re: Sources of PC Clock Synchronization Software
  • From: "Thomas O´Hara, PhD" <ohara@azstarnet.com>
• Re: ATM metric units
  • From: Tim Ormsby <cerberus@dove.net.au>
• ATM classes / clubs
  • From: Tim Poulsen <poulsen@netacc.net>
• ATM Re: Banicki
  • From: TMSP <tmsp@triax.com>
• ATM Enough
  • From: TMSP <tmsp@triax.com>
• Re: ATM PIN photodiodes
  • From: Tom Wheeler <microvax@bright.net>
• Re: ATM mirror
  • From: Tom Wheeler <microvax@bright.net>
• re: Re: ATM secondaries shadow
  • From: "Tony Dunlap" <tdunlap@odot.dot.ohio.gov>
• re: Re: ATM Horror stories
  • From: "Tony Dunlap" <tdunlap@odot.dot.ohio.gov>
• re: ATM PVC Pipe telescope body
  • From: "Tony Dunlap" <tdunlap@odot.dot.ohio.gov>
• ATM Golding?
  • From: "Tony Dunlap" <tdunlap@odot.dot.ohio.gov>
• re: ATM PVC Pipe telescope body
  • From: "Tony Dunlap" <tdunlap@odot.dot.ohio.gov>
• re: Re: ATM Cradle Rings and things
  • From: "Tony Dunlap" <tdunlap@odot.dot.ohio.gov>
• ATM Global Positioning System
  • From: "Tony Harmon" <aharmon@swbell.net>
• ATM Newbie trying to Polish
  • From: TPolk123@aol.com
• ATM Figuring Question, looks like a volcano!
  • From: TPolk123@aol.com
• Re: ATM Shrouds still have a purpose
  • From: UC007@aol.com
• Re: ATM Synching to atomic clock via SNTP...
  • From: UC007@aol.com
• Re: ATM First light
  • From: UC007@aol.com
• Re: ATM Online resources for gears
  • From: UC007@aol.com
• Re: ATM Synching to atomic clock via SNTP...
  • From: UC007@aol.com
• Re: ATM Byers Still in Business
  • From: UC007@aol.com
• Re: ATM Byers Still in Business
  • From: UC007@aol.com
• Re: ATM ID 4" Lenses?
  • From: UC007@aol.com
• ATM HOME BREW GPS FREQ STD
  • From: UC007@aol.com
• Re: ATM Opinions needed
  • From: UC007@aol.com
• Re: ATM Foucault telescope lense?
  • From: UC007@aol.com
• Re: ATM Silvering methods
  • From: UC007@aol.com
• Re: ATM Silvering Techniques
  • From: UC007@aol.com
• Re: ATM !?
  • From: UC007@aol.com
• Re: ATM Slewing Speed
  • From: UC007@aol.com
• Re: ATM Kitchen Table Interferometry
  • From: UC007@aol.com
• Re: ATM Super accurate parabolic grinder
  • From: UC007@aol.com
• Re: ATMJ help
  • From: UC007@aol.com
• Re: S&T and the State of ATMing
  • From: UC007@aol.com
• Young Students Interest In Astronomy (Re: ATM Demise, Off Topic)
  • From: UC007@aol.com
• Re: ATM Re: atm-digest V1 #1436
  • From: UC007@aol.com
• Re: ATM Roller drive
  • From: UC007@aol.com
• Re: ATM Re: atm-digest V1 #1436
  • From: UC007@aol.com
• Re: ATM Re: Reprints of Everything
  • From: UC007@aol.com
• Re: ATM Newport's plate glass tools.
  • From: UC007@aol.com
• Re: ATM Cradle Rings and things
  • From: UC007@aol.com
• ATM When is the Oregon Star Party?
  • From: VirgilAJ@aol.com
• ATM Black Rouge (was Technique for smoothing)
  • From: VirgilAJ@aol.com
• Re: ATM Black Rouge (was Technique for smoothing)
  • From: VirgilAJ@aol.com
• ATM Re: foucault images
  • From: VirgilAJ@aol.com
• ATM Compact Reflector Designing
  • From: VVHITEFIRE@aol.com
• Re: ATM stiffness requirements for truss tubes
  • From: VVHITEFIRE@aol.com
• Fwd: ATM Pitch lap shelf life?
  • From: VVHITEFIRE@aol.com
• re:more newbie ATM questions
  • From: "Wayne" <wmccaughey@ushwy1.com>
• ATM Re: more Newbie Questions
  • From: "Wayne" <wmccaughey@ushwy1.com>
• ATM Building a Waineo grinding machine
  • From: "William A. Morgan" <sass5@erols.com>
• ATM Hogging and tile tools
  • From: "William A. Morgan" <sass5@erols.com>
• ATM Thank you for your relies on Hogging and tiles
  • From: "William A. Morgan" <sass5@erols.com>
• ATM Beginner questions
  • From: "William A. Morgan" <sass5@erols.com>
• ATM Foucault telescope lense?
  • From: "William A. Morgan" <sass5@erols.com>
• ATM Just wanting to put the pieces together
  • From: "William A. Morgan" <sass5@erols.com>
• ATM Slitless tester question
  • From: "William A. Morgan" <sass5@erols.com>
• ATM beginner projects
  • From: "William A. Morgan" <sass5@erols.com>
• ATM refractor focuser help
  • From: "William A. Morgan" <sass5@erols.com>
• Re: ATM Lucky lucky
  • From: William E Byrd <web01@flash.net>
• Re: ATM Re: PVC telescope tubes
  • From: William E Byrd <web01@flash.net>
• Re: ATM TV zoom lenses
  • From: William E Byrd <web01@flash.net>
• Re: ATM Mel's stepper circuit, a question -Reply
  • From: William E Byrd <web01@flash.net>
• Re: ATM Bino collimnation
  • From: William E Byrd <web01@flash.net>
• Re: ATM I need the Dakin Diagonal Offset Calculation Correction
  • From: Willie Koorts <wpk@saao.ac.za>
• Re: Rebuilding an old ATM Scope
  • From: Willie Koorts <wpk@saao.ac.za>
• ATM broken glass=broken dream??
  • From: WWade@eagle.org