[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: [ATM] soldering SMPs
> excess. One technique for soldering ICs is to flood the pins with
> solder, then use the braid to remove the excess, just leaving solder
> under the pins.
This is what I do, down to 0.8mm pitch.
Best to use small quantities of flux, to improve sucking the surplus tin
away with the desoldering litze.
See: http://home.hetnet.nl/~artm/atm/stepper/protoboard.html#result bottom
of the page.
The DACs are the most challenging devices.
Arjan
_______________________________________________
ATM mailing list http://www.atmlist.net/