[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] soldering SMPs

To: ATM Superheros <atm@atmlist.net>
Subject: [ATM] soldering SMPs
From: Dominic-Luc Webb <dlwebb@canit.se>
Date: Thu, 13 Dec 2007 16:20:04 +0100 (MET)
Delivered-to: atm_arc@astro.umsystem.edu
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

Anyone here have experience with soldering very small SMP
devices? Solder points are 1.5 mm apart.

Dominic

_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] soldering SMPs
  - From: "Bob May" <rmay@nethere.com>
- Re: [ATM] soldering SMPs
  - From: "Don Clement" <don_clement@charter.net>
- Re: [ATM] soldering SMPs
  - From: ks1u <ks1u@prodigy.net>
- Re: [ATM] soldering SMPs
  - From: leftfieldstar@aol.com
- Re: [ATM] soldering SMPs
  - From: Richard <cnc@cncservo.co.uk>
- Re: [ATM] soldering SMPs
  - From: William Lee <wjl12@comcast.net>

Prev by Author: Re: [ATM] Telescope design -- Linux software
Next by Author: [ATM] SMT, not SMP
Previous by thread: Re: [ATM] SMT, not SMP
Next by thread: Re: [ATM] soldering SMPs
Index(es):
- Author
- Thread