Re: [ATM] Elgin machine turntable to stroke ratio

[Michael Lindner <mikell@optonline.net>]

Christopher Dalla Piazza wrote:
> I'm getting ready to build an Elgin machine and have found an appropriate 18 
> rpm motor for the stroke rate but I'm reading that it is best to have the 
> turntable turn faster, 2-3x the rate of stroke.

My machine has both TT and OA at about 25 RPM, with a variac on one or 
the other to slow it down. I do most work with the OA 2-3x slower, as 
you suggest, but for some figuring and especially hand figuring I run 
the TT very slowly (2-3 RPM).

-- 
Michael Lindner
http://www.starastronomy.org *** http://home.att.net/~mikel
http://www.atmsite.org *** http://www.atmlist.net
_______________________________________________
ATM mailing list http://www.atmlist.net/