[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Wire Spider Vibrations

>Chris Dalla Piazza wrote:
>> My final design was to select a PVC pipe the next size smaller than my
>> secondary and then fasten the wire to the inside of the pipe, attaching 
the
>> secondary to the end of the pipe.  My attachment points were at the 
ends of
>> the pipe and one attachment at the telescope tube wall.
>
>Chris, how is the secondary attached to the PVC? Silicone? Does that
>actually stick to the PVC?
>
>Michael Lindner

That's indeed a problem I have too... still to be solved.
What about indenting the edge of the PVC?

Hugues




DISCLAIMER: 
This e-mail contains proprietary information some or all of which may be legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely on this e-mail.
_______________________________________________
ATM mailing list http://www.atmlist.net/