Amateur Telescope Makers (ATM) Archive for DEC05 - by thread

• Author Index

• [ATM] Off Topic, Spam or Virus warning, vorblesnak
  • <Possible follow-up(s)>
  • [ATM] Off Topic, Spam or Virus warning, Greg Jones
  • [ATM] Off Topic, Spam or Virus warning, fhh
    • Re: [ATM] Off Topic, Spam or Virus warning, Mark Holm
• [ATM] Parts needed for a class, fhh
• [ATM] 15.5 Ultra Thin pictures posted, vorblesnak
• [ATM] 150 mm f/15 Doublet, Richard F.L.R. Snashall
• [ATM] 8" Diagonal, Polaraligned
  • Re: [ATM] 8" Diagonal, Mike Lockwood
    • Re: [ATM] 8" Diagonal, Mark Holm
      • Re: [ATM] 8" Diagonal, Mike Lockwood
  • <Possible follow-up(s)>
  • Re: [ATM] 8" Diagonal, Tom Krajci
  • Re: [ATM] 8" Diagonal, Hugues.Laroche
• [ATM] 8" Diagonal- More info, Polaraligned
  • Re: [ATM] 8" Diagonal- More info, Mark Holm
    • Re: [ATM] 8" Diagonal- More info, Dream - Telescopes & Accessories, Inc.
      • Re: [ATM] 8" Diagonal- More info, Mel Bartels
      • Re: [ATM] 8" Diagonal- More info, Mark Holm
      • Re: [ATM] 8" Diagonal- More info, vladimir
  • <Possible follow-up(s)>
  • Re: [ATM] 8" Diagonal- More info, Tom Krajci
    • Re: [ATM] 8" Diagonal- More info, Dream - Telescopes & Accessories, Inc.
  • [ATM] 8" Diagonal- More info, Polaraligned
  • [ATM] 8" Diagonal- More info, Polaraligned
  • Re: [ATM] 8" Diagonal- More info, Tom Krajci
• [ATM] 8" F/4.2... Done?, Jason Hissong
  • Re: [ATM] 8" F/4.2... Done?, Jim Burrows
    • [ATM] 8" F/4.2... Really Done!, Jason Hissong
  • Re: [ATM] 8" F/4.2... Done?, Joe
    • Re: [ATM] 8" F/4.2... Done?, Nils Olof Carlin
      • Re: [ATM] 8" F/4.2... Done?, Mike Lockwood
      • Re: [ATM] 8" F/4.2... Done?, Joe
• [ATM] 8" F4.2 Back from coaters, Jason Hissong
• [ATM] [Fwd: Amateur Telescope Mount needs a good home], Ken Lowther
• [ATM] [Fwd: Re: [cave_telescopes] 2" adapter for Cave 2" focuser], Starglass
• [ATM] A Question, Starglass
• [ATM] Alan Adler's Flex Mirror specs, Andre Yanoviak
  • Re: [ATM] Alan Adler's Flex Mirror specs, Bill Kelley
    • Re: [ATM] Alan Adler's Flex Mirror specs, Bill Kelley
• [ATM] Another flat-field anastigmatic aplant, vladimir
  • Re: [ATM] Another flat-field anastigmatic aplant, Richard F.L.R. Snashall
    • Re: [ATM] Another flat-field anastigmatic aplant, vladimir
      • Re: [ATM] Another flat-field anastigmatic aplant, Richard F.L.R. Snashall
      • Re: [ATM] Another flat-field anastigmatic aplant, vladimir
      • Re: [ATM] Another flat-field anastigmatic aplant, Richard F.L.R. Snashall
      • Re: [ATM] Another flat-field anastigmatic aplant, Richard F.L.R. Snashall
      • Re: [ATM] Another flat-field anastigmatic aplant, Richard F.L.R. Snashall
      • Re: [ATM] Another flat-field anastigmatic aplant, vladimir
      • Re: [ATM] Another flat-field anastigmatic aplant, Richard F.L.R. Snashall
      • Re: [ATM] Another flat-field anastigmatic aplant, vladimir
  • Re: [ATM] Another flat-field anastigmatic aplant, Ukyo Chen
    • Re: [ATM] Another flat-field anastigmatic aplant, Richard F.L.R. Snashall
      • Re: [ATM] Another flat-field anastigmatic aplant, Ukyo Chen
      • Re: [ATM] Another flat-field anastigmatic aplant, Richard F.L.R. Snashall
      • Re: [ATM] Another flat-field anastigmatic aplant, Ukyo Chen
    • Re: [ATM] Another flat-field anastigmatic aplant, vladimir
      • Re: [ATM] Another flat-field anastigmatic aplant, vladimir
  • Re: [ATM] Another flat-field anastigmatic aplant, Bob May
    • Message not available
      • Re: [ATM] Another flat-field anastigmatic aplant, Bob May
• Re: [ATM] Are these kits good?, Richard F.L.R. Snashall
• Re: [ATM] Are these kits good? & Refractor Kits, Jerry
  • Re: [ATM] Are these kits good? & Refractor Kits, Richard F.L.R. Snashall
    • Re: [ATM] Are these kits good? & Refractor Kits, Jerry
• Re: [ATM] artificial convex curve for pitch lap, Mike Lockwood
  • <Possible follow-up(s)>
  • Re: [ATM] artificial convex curve for pitch lap, Bob May
• Re: [ATM] ATM-Edwin Hubble's father was an ATMer, Donald Good
• [ATM] ATM: Kreig McBride, Jeff Baldwin
• [ATM] Baffling Wynne corrector, Polaraligned
  • <Possible follow-up(s)>
  • Re: [ATM] Baffling Wynne corrector, Tom Krajci
    • Re: [ATM] Baffling Wynne corrector, Polaraligned
      • Re: [ATM] Baffling Wynne corrector, Ken Hunter
      • Re: [ATM] Baffling Wynne corrector, Polaraligned
  • Re: [ATM] Baffling Wynne corrector, Tom Krajci
    • Re: [ATM] Baffling Wynne corrector, Polaraligned
• [ATM] Care package to Pakistan, Ken Hunter
  • Re: [ATM] Care package to Pakistan, Saqib Sajjad
• [ATM] Christmas greetings......, Thomas Janstrom
  • Re: [ATM] Christmas greetings......, George Anderson
    • Re: [ATM] Christmas greetings......, Richard
• [ATM] Christmas Present?, Cole3c
  • Re: [ATM] Christmas Present?, Mel Bartels
  • Re: [ATM] Christmas Present?, Richard Ozer
    • Re: [ATM] Christmas Present?, B. Bainbridge
      • Re: [ATM] Christmas Present?, Christopher Todd
• [ATM] Designing a simple fork with desirable flexure characteristics, Tom Krajci
  • Re: [ATM] Designing a simple fork with desirable flexurecharacteristics, atm
  • Re: [ATM] Designing a simple fork with desirable flexurecharacteristics, Richard
    • Re: [ATM] Designing a simple fork with desirableflexurecharacteristics, Jerry Reddell
      • Re: [ATM] Designing a simple fork with desirableflexurecharacteristics, Richard
  • Re: [ATM] Designing a simple fork with desirable flexurecharacteristics, Polaraligned
  • Re: [ATM] Designing a simple fork with desirable flexurecharacteristics, Virgil.Johnson
• Re: [ATM] Designing a simple fork with desirable flexurecharacteristics, Tom Krajci
  • Re: [ATM] Designing a simple fork with desirableflexurecharacteristics, atm
    • Re: [ATM] Designing a simple fork withdesirable flexurecharacteristics, Don Clement
    • Re: [ATM] Designing a simple fork with desirable, Polaraligned
  • <Possible follow-up(s)>
  • Re: [ATM] Designing a simple fork with desirable flexurecharacteristics, Tom Krajci
    • Re: [ATM] Designing a simple fork with desirableflexurecharacteristics, Don D'Egidio
  • Re: [ATM] Designing a simple fork with desirable flexurecharacteristics, Tom Krajci
  • Re: [ATM] Designing a simple fork with desirable flexurecharacteristics, Tom Krajci
• [ATM] Diagonal mirror size, Chris Welsh
  • Re: [ATM] Diagonal mirror size, vladimir
    • Re: [ATM] Diagonal mirror size, Mark Holm
    • Re: [ATM] Diagonal mirror size, vladimir
      • Re: [ATM] Diagonal mirror size, vladimir
  • <Possible follow-up(s)>
  • Re: [ATM] Diagonal mirror size, Arjan te Marvelde
    • Re: [ATM] Diagonal mirror size, Joe
      • Re: [ATM] Diagonal mirror size, Richard
• [ATM] Diagonal Size, ntent
  • Re: [ATM] Diagonal Size, Joe
  • <Possible follow-up(s)>
  • Re: [ATM] Diagonal Size, ntent
    • Re: [ATM] Diagonal Size, Mark Holm
    • Re: [ATM] Diagonal Size, Scott Carson
  • [ATM] Diagonal Size, Polaraligned
    • Re: [ATM] Diagonal Size, Don Clement
    • Re: [ATM] Diagonal Size, vladimir
      • Re: [ATM] Diagonal Size, Richard
      • Re: [ATM] Diagonal Size, vladimir
    • Re: [ATM] Diagonal Size, Jerry
      • Re: [ATM] Diagonal Size, Polaraligned
      • Re: [ATM] Diagonal Size, Don Clement
      • Re: [ATM] Diagonal Size, Jerry
      • Re: [ATM] Diagonal Size, Daniel Fundo
      • Re: [ATM] Diagonal Size, Jerry
  • Re: [ATM] Diagonal Size, John Sherman
  • Re: [ATM] Diagonal Size, Arjan te Marvelde
    • Re: [ATM] Diagonal Size, Mark Holm
      • Re: [ATM] Diagonal Size, Don Clement
    • Re: [ATM] Diagonal Size, vladimir
• Re: [ATM] Diagonal size_ Vladimir, ntent
• [ATM] Extending a wifi network, Michael Peck
  • Re: [ATM] Extending a wifi network, hermit
    • Re: [ATM] Extending a wifi network, David O. Trevino
      • Re: [ATM] Extending a wifi network, Mike Warne
  • Re: [ATM] Extending a wifi network, Mike Warne
  • Re: [ATM] Extending a wifi network, Kevin MIchael Zabbo
  • Re: [ATM] Extending a wifi network, atm
    • Re: [ATM] Extending a wifi network: Parabolic Dish Reflector, Kevin MIchael Zabbo
      • Re: [ATM] Extending a wifi network: Parabolic Dish Reflector, atm
      • Re: [ATM] Extending a wifi network: Parabolic Dish Reflector, Bob May
  • <Possible follow-up(s)>
  • Re: [ATM] Extending a wifi network, matt
    • Re: [ATM] Extending a wifi network, Michael Peck
      • Re: [ATM] Extending a wifi network, Jerry Reddell
      • Re: [ATM] Extending a wifi network, Don Clement
      • Re: [ATM] Extending a wifi network, atm
      • Re: [ATM] Extending a wifi network, Don Clement
      • Re: [ATM] Extending a wifi network, atm
      • Re: [ATM] Extending a wifi network, Jerry
      • Re: [ATM] Extending a wifi network, Kevin MIchael Zabbo
      • Re: [ATM] Extending a wifi network, atm
      • Re: [ATM] Extending a wifi network: power by klystron tube, Kevin MIchael Zabbo
      • Re: [ATM] Extending a wifi network, Jerry
      • Re: [ATM] Extending a wifi network, Michael Peck
      • Re: [ATM] Extending a wifi network, Bob May
      • Re: [ATM] Extending a wifi network, Kevin MIchael Zabbo
      • Re: [ATM] Extending a wifi network, Tom Moulton
  • Re: [ATM] Extending a wifi network, gregj888
  • Re: [ATM] Extending a wifi network, gregj888
• Re: [ATM] Extending a wifi network: Parabolic Dish Reflector, Kevin MIchael Zabbo
• [ATM] Flat grinding the back of the primary mirror, Terin Lyr D'Amico
  • Re: [ATM] Flat grinding the back of the primary mirror, Mel Bartels
    • Re: [ATM] Flat grinding the back of the primary mirror, Mike Lockwood
      • Re: [ATM] Flat grinding the back of the primary mirror, Terin Lyr D'Amico
      • Re: [ATM] Flat grinding the back of the primary mirror, Mike Lockwood
      • Re: [ATM] Flat grinding the back of the primary mirror, Richard
      • Re: [ATM] Flat grinding the back of the primary mirror, Mike Lockwood
      • Re: [ATM] Flat grinding the back of the primary mirror, Bob May
  • Re: [ATM] Flat grinding the back of the primary mirror, Bob May
    • Re: [ATM] Flat grinding the back of the primary mirror, Terin Lyr D'Amico
      • Re: [ATM] Flat grinding the back of the primary mirror, Vladimir Galogaza
  • <Possible follow-up(s)>
  • Re: [ATM] Flat grinding the back of the primary mirror, Rod Brackenridge
  • Re: [ATM] Flat grinding the back of the primary mirror, Arjan te Marvelde
    • Re: [ATM] Flat grinding the back of the primary mirror, Mel Bartels
    • Re: [ATM] Flat grinding the back of the primary mirror, Bob May
  • Re: [ATM] Flat grinding the back of the primary mirror, info
    • Re: [ATM] Flat grinding the back of the primary mirror, Vladimir Galogaza
      • Re: [ATM] Flat grinding the back of the primary mirror, Jeff Baldwin
      • Re: [ATM] Flat grinding the back of the primary mirror, Richard F.L.R. Snashall
  • Re: [ATM] Flat grinding the back of the primary mirror, info
    • Re: [ATM] Flat grinding the back of the primary mirror, Martti KOskimo
• [ATM] flat query, shyam rathod
  • Re: [ATM] flat query, Thomas Janstrom
  • Re: [ATM] flat query, Bob May
• [ATM] Flex mirror adhesive, Andre Yanoviak
• [ATM] Gluing this mirror, Mark Holm
  • Re: [ATM] Gluing this mirror, Dream - Telescopes & Accessories, Inc.
  • <Possible follow-up(s)>
  • Re: [ATM] Gluing this mirror, Tom Krajci
  • Re: [ATM] Gluing this mirror, Arjan te Marvelde
• [ATM] How I Do It,,,, Joe
• [ATM] machine grinding, jeff newsom
  • <Possible follow-up(s)>
  • Re: [ATM] machine grinding, Tom Krajci
  • Re: [ATM] machine grinding, Rod Brackenridge
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull, Tom Krajci
  • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, James Lerch
  • <Possible follow-up(s)>
  • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, Donald Good
  • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, Don Clement
    • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, Vladimir Galogaza
    • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, Don Clement
  • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, Tom Krajci
  • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, Tom Krajci
    • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, Don Clement
      • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, George Anderson
    • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, Donald Good
  • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, RodShea
    • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, George Anderson
    • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, RodShea
  • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, Don Clement
    • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, Jerry
    • Re: [ATM] Mirror Cells - Springs vs. Push/Pull, George Anderson
• [ATM] mirror grinding, ccabar
  • Re: [ATM] mirror grinding, Bob May
  • <Possible follow-up(s)>
  • Re: [ATM] mirror grinding, John Sherman
• [ATM] Mounted glass filters, John Lynch
• Re: [ATM] Newt imaging vs visual design tradeoffs -- ideas?, Bob May
  • Re: [ATM] Newt imaging vs visual design tradeoffs -- ideas?, Scott Carson
• [ATM] North pole drift, Vladimir Galogaza
  • Re: [ATM] North pole drift, George Anderson
• [ATM] Oblate spheroid ?, Mahmood Hassan
  • Re: [ATM] Oblate spheroid ?, Vladimir Galogaza
    • Re: [ATM] Oblate spheroid ?, Richard
      • Re: [ATM] Oblate spheroid ?, Vladimir Galogaza
  • Re: [ATM] Oblate spheroid ?, Bob May
• [ATM] Off Topic, Spam or Virus warning, vorblesnak
  • Re: [ATM] Off Topic, Spam or Virus warning, Gary Woods
  • Re: [ATM] Off Topic, Spam or Virus warning, Jerry Dove
    • Re: [ATM] Off Topic, Spam or Virus warning, B. Bainbridge
      • Re: [ATM] Off Topic, Spam or Virus warning, Daniel Fundo
  • Re: [ATM] Off Topic, Spam or Virus warning, Bob May
  • Re: [ATM] Off Topic, Spam or Virus warning, Don Clement
  • Re: [ATM] Off Topic, Spam or Virus warning, Stan Truitt
    • Re: [ATM] Off Topic, Spam or Virus warning, Matt Considine
  • <Possible follow-up(s)>
  • Re: [ATM] Off Topic, Spam or Virus warning, John Sherman
  • Re: [ATM] Off Topic, Spam or Virus warning, Sergeant Pinback
  • Re: [ATM] Off Topic, Spam or Virus warning, Arjan te Marvelde
    • Re: [ATM] Off Topic, Spam or Virus warning, Sergeant Pinback
• [ATM] Only two books allowed, Mike Shuken
  • Re: [ATM] Only two books allowed, Mike Wolford
  • Re: [ATM] Only two books allowed, GF
    • Re: [ATM] Only two books allowed, Rick M
  • Re: [ATM] Only two books allowed, Kevin MIchael Zabbo
  • Re: [ATM] Only two books allowed, Bob May
    • Re: [ATM] Only two books allowed, Chris Todd
      • Re: [ATM] Only two books allowed, Polaraligned
      • Re: [ATM] Only two books allowed, Bob May
    • Re: [ATM] Only two books allowed, Alan Scott
      • Re: [ATM] Only two books allowed, Mike Lockwood
      • Re: [ATM] Only two books allowed, Jerry
      • Re: [ATM] Only two books allowed, Lawrence Sayre
      • Re: [ATM] Only two books allowed, hermit
      • Re: [ATM] Only two books allowed, John Lynch
      • Re: [ATM] Only two books allowed, Guy Brandenburg
      • [ATM] Ronchi test accuracy, Mike Lockwood
      • Re: [ATM] Ronchi test accuracy, Guy Brandenburg
      • Re: [ATM] Ronchi test accuracy, Jerry
      • Re: [ATM] Only two books allowed, Kevin MIchael Zabbo
      • Re: [ATM] Only two books allowed, Richard
      • Re: [ATM] Only two books allowed, Thomas A. Moulton
  • <Possible follow-up(s)>
  • Re: [ATM] only two books allowed, The Alarm Co.
• [ATM] opps, Ken Lowther
• [ATM] OT: Polystyrene properties?, Jim Miller
  • Re: [ATM] OT: Polystyrene properties?, Dominic-Luc Webb
    • Re: [ATM] OT: Polystyrene properties?, Jerry Reddell
    • Re: [ATM] OT: Polystyrene properties?, Jim Miller
• [ATM] Package address, Ken Hunter
• [ATM] Parts needed for a class, Douglas Arion
  • Re: [ATM] Parts needed for a class, Richard
  • Re: [ATM] Parts needed for a class, Ken Hunter
  • Re: [ATM] Parts needed for a class, Bill Kelley
  • Re: [ATM] Parts needed for a class, Bill Kelley
• [ATM] pitch lap to guy and ken, jeff newsom
• [ATM] Polar moment of inertia for a square tube?, Tom Krajci
  • Re: [ATM] Polar moment of inertia for a square tube?, fabio
  • Re: [ATM] Polar moment of inertia for a square tube?, Tom Krajci
    • Re: [ATM] Polar moment of inertia for a square tube?, Richard
• [ATM] polishing plastic, Dominic-Luc Webb
  • Re: [ATM] polishing plastic, Don Clement
    • Re: [ATM] polishing plastic, Richard
    • Re: [ATM] polishing plastic, Don Clement
      • Re: [ATM] polishing plastic, Dominic-Luc Webb
      • Re: [ATM] polishing plastic, Richard
      • Re: [ATM] polishing plastic, Vladimir Galogaza
      • Re: [ATM] polishing plastic, Dominic-Luc Webb
      • Re: [ATM] polishing plastic, James Lerch
      • Re: [ATM] polishing plastic, Don Clement
      • Re: [ATM] polishing plastic, Lafotec
• [ATM] recycling grit, jeff newsom
  • Re: [ATM] recycling grit, Vladimir Galogaza
    • Re: [ATM] recycling grit, Tom Moulton
      • Re: [ATM] recycling grit, hermit
    • Re: [ATM] recycling grit, Jeff Baldwin
  • Re: [ATM] recycling grit, Bob May
    • Re: [ATM] recycling grit, Guy Brandenburg
      • Re: [ATM] recycling grit, Bob May
• [ATM] Remove old mirror coating., TN55
  • Re: [ATM] Remove old mirror coating., James Lerch
  • Re: [ATM] Remove old mirror coating., Jim Burrows
    • Re: [ATM] Remove old mirror coating., Jeff Baldwin
      • Re: [ATM] Remove old mirror coating., James Mulherin
      • Re: [ATM] Remove old mirror coating., Ken Reid
      • Re: [ATM] Remove old mirror coating., James Mulherin
      • Re: [ATM] Remove old mirror coating., Vladimir Galogaza
      • Re: [ATM] Remove old mirror coating., Anthony Stillman
      • Re: [ATM] Remove old mirror coating., Scott Ewart
• [ATM] ronchi accuracy, jeff newsom
  • Re: [ATM] ronchi accuracy, Jim Burrows
    • Re: [ATM] ronchi accuracy, Mel Bartels
      • Re: [ATM] ronchi accuracy, Jason Hissong
      • Re: [ATM] ronchi accuracy, Michael Peck
      • Message not available
      • Re: [ATM] ronchi accuracy, Michael Peck
      • Re: [ATM] ronchi accuracy, Richard
      • Re: [ATM] ronchi accuracy, Jan Bentz
      • Re: [ATM] ronchi accuracy, Jan Bentz
      • Re: [ATM] ronchi accuracy, Guy Brandenburg
      • Re: [ATM] ronchi accuracy, Dale Eason
      • Re: [ATM] ronchi accuracy, Jan Bentz
      • Re: [ATM] ronchi accuracy, Dominic-Luc Webb
      • Re: [ATM] ronchi accuracy, Vladimir Galogaza
      • Re: [ATM] ronchi accuracy, Mel Bartels
  • <Possible follow-up(s)>
  • Re: [ATM] ronchi accuracy, John Sherman
    • Re: [ATM] ronchi accuracy, Nils Olof Carlin
      • Re: [ATM] ronchi accuracy, Nils Olof Carlin
• [ATM] ronchi testing/machine grinding, jeff newsom
• [ATM] Silvering Woes, Donald R. Bates
  • Re: [ATM] Silvering Woes, Jean-Marc Becker
    • Re: [ATM] Silvering Woes, William Marriott
      • Re: [ATM] Silvering Woes, Donald R. Bates
  • Re: [ATM] Silvering Woes, James Lerch
  • Re: [ATM] Silvering Woes, Pete
  • Re: [ATM] Silvering Woes, Mark Holm
    • Re: [ATM] Silvering Woes, James Lerch
  • Re: [ATM] Silvering Woes, Bill Kelley
  • <Possible follow-up(s)>
  • Re: [ATM] Silvering Woes, James Lerch
    • Re: [ATM] Silvering Woes, Jason Hissong
      • [ATM] Vacuum coating, was Silvering Woes, James Lerch
      • Re: [ATM] Vacuum coating, was Silvering Woes, hermit
• [ATM] Slight small toll, mjlazo
  • Re: [ATM] Slight small toll, Jim Burrows
• [ATM] Stars, John Sherman
  • Re: [ATM] Stars, Richard
• [ATM] Suggestion for working on telescope tube/storage, John Lynch
• [ATM] The 15.5 Ultra Thin, vorblesnak
  • Message not available
    • Re: [ATM] The 15.5 Ultra Thin Lap Discussion, vorblesnak
• [ATM] Winter at the scope werks, vorblesnak
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA, Mail System Internal Data