[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Designing a simple fork withdesirable flexurecharacteristics

To: <atm@hudler.org>, <atm@atmlist.net>
Subject: Re: [ATM] Designing a simple fork withdesirable flexurecharacteristics
From: "Don Clement" <clement.focuser@verizon.net>
Date: Thu, 08 Dec 2005 11:23:04 -0800
List-Archive: <http://www.atmlist.net/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <040901c5fbaa$ddfee9d0$6564a8c0@hudler.org>
Sender: atm-bounces@atmlist.net


> 
> Actually my next one's going to be on a hexapod. 
> 
 Also working on hexapod mount.

Don Clement
Running Springs, California 
_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- Re: [ATM] Designing a simple fork with desirableflexurecharacteristics
  - From: <atm@hudler.org>

Prev by Author: Re: [ATM] Extending a wifi network
Next by Author: Re: [ATM] Extending a wifi network
Prev by thread: Re: [ATM] Designing a simple fork with desirableflexurecharacteristics
Next by thread: Re: [ATM] Designing a simple fork with desirable
Index(es):
- Author
- Thread