[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Designing a simple fork with desirableflexurecharacteristics

To: "Tom Krajci" <tom_krajci@tularosa.net>, <atm@atmlist.net>
Subject: Re: [ATM] Designing a simple fork with desirableflexurecharacteristics
From: "Don D'Egidio" <djd521@comcast.net>
Date: Wed, 7 Dec 2005 22:10:58 -0500
List-Archive: <http://www.atmlist.net/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <ALEIKIMFDBDICIHJOPFEMEHDCOAA.tom_krajci@tularosa.net>
Sender: atm-bounces@atmlist.net

Tom,

Dial Test Indicator. I have one that will to 0.0001".

Don

----- Original Message ----- 
From: "Tom Krajci" <tom_krajci@tularosa.net>
To: <atm@atmlist.net>
Sent: Wednesday, December 07, 2005 21:30
Subject: Re: [ATM] Designing a simple fork with desirable flexurecharacteristics


> What's a DTI?
> Tom Krajci
> Cloudcroft, New Mexico
> http://overton2.tamu.edu/aset/krajci/


_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- Re: [ATM] Designing a simple fork with desirable flexurecharacteristics
  - From: "Tom Krajci" <tom_krajci@tularosa.net>

Prev by Author: Re: [ATM] polishing plastic
Next by Author: Re: [ATM] Mirror Cells - Springs vs. Push/Pull
Prev by thread: Re: [ATM] Designing a simple fork with desirable flexurecharacteristics
Next by thread: Re: [ATM] Designing a simple fork with desirable flexurecharacteristics
Index(es):
- Author
- Thread