[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Mirror Cells - Springs vs. Push/Pull

To: "ATM List" <atm@atmlist.net>
Subject: Re: [ATM] Mirror Cells - Springs vs. Push/Pull
From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
Date: Sat, 3 Dec 2005 15:01:57 +0100
List-Archive: <http://www.atmlist.net/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <0IQW001S5TH50C50@vms052.mailsrvcs.net><004101c5f806$cdbfabb0$6401a8c0@hugo>
Sender: atm-bounces@atmlist.net


> WARNING!  Simply making hachsaw cross-cuts in your collimation bolts will
> leave scratches in the bolts at the thinnest part (at the bottom of the
cut)
> creating stress risers.  Stress risers are locations in materials that
lead
> to concentrations of stress forces leading to fatigue failure,.......

Don,

What is your estimate of the worst case angular displacement
(bending) of such compliant joint like the one on your collimation bolt?

Regards
Vladimir.



-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.13.10/190 - Release Date: 1.12.2005

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  - From: "Don Clement" <clement.focuser@verizon.net>

Prev by Author: Re: [ATM] 8" Diagonal- More info
Next by Author: [ATM] North pole drift
Prev by thread: Re: [ATM] Mirror Cells - Springs vs. Push/Pull
Next by thread: Re: [ATM] Mirror Cells - Springs vs. Push/Pull
Index(es):
- Author
- Thread