Amateur Telescope Makers (ATM) Archive for DEC05 - by author

• Thread Index

• Re: [ATM] Only two books allowed
  • From: "Alan Scott" <alanne1956@hotmail.com>
• [ATM] Alan Adler's Flex Mirror specs
  • From: "Andre Yanoviak" <andre_y6@hotmail.com>
• [ATM] Flex mirror adhesive
  • From: "Andre Yanoviak" <andre_y6@hotmail.com>
• Re: [ATM] Remove old mirror coating.
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Diagonal mirror size
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Gluing this mirror
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Diagonal Size
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Off Topic, Spam or Virus warning
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Designing a simple fork with desirable flexurecharacteristics
  • From: <atm@hudler.org>
• Re: [ATM] Extending a wifi network
  • From: <atm@hudler.org>
• Re: [ATM] Designing a simple fork with desirableflexurecharacteristics
  • From: <atm@hudler.org>
• Re: [ATM] Extending a wifi network: Parabolic Dish Reflector
  • From: <atm@hudler.org>
• Re: [ATM] Extending a wifi network
  • From: <atm@hudler.org>
• Re: [ATM] Extending a wifi network
  • From: <atm@hudler.org>
• Re: [ATM] Extending a wifi network
  • From: <atm@hudler.org>
• Re: [ATM] Christmas Present?
  • From: "B. Bainbridge" <brianb@u.washington.edu>
• Re: [ATM] Off Topic, Spam or Virus warning
  • From: "B. Bainbridge" <brianb@u.washington.edu>
• Re: [ATM] Parts needed for a class
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Parts needed for a class
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Silvering Woes
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Alan Adler's Flex Mirror specs
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Alan Adler's Flex Mirror specs
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] artificial convex curve for pitch lap
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Newt imaging vs visual design tradeoffs -- ideas?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Only two books allowed
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Only two books allowed
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Extending a wifi network: Parabolic Dish Reflector
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] mirror grinding
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Extending a wifi network
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Off Topic, Spam or Virus warning
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Oblate spheroid ?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] recycling grit
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] recycling grit
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] flat query
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: "Bob May" <bobmay@nethere.com>
• [ATM] mirror grinding
  • From: "ccabar" <ccabar@bigpond.com>
• Re: [ATM] Only two books allowed
  • From: Chris Todd <christopher.todd@gmail.com>
• [ATM] Diagonal mirror size
  • From: Chris Welsh <chris.welsh@rogers.com>
• Re: [ATM] Christmas Present?
  • From: "Christopher Todd" <christopher.todd@gmail.com>
• [ATM] Christmas Present?
  • From: Cole3c <cole3c@tampabay.rr.com>
• Re: [ATM] ronchi accuracy
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Diagonal Size
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Off Topic, Spam or Virus warning
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Extending a wifi network
  • From: "David O. Trevino" <david.trevino@byu.edu>
• Re: [ATM] OT: Polystyrene properties?
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• [ATM] polishing plastic
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] polishing plastic
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] polishing plastic
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] ronchi accuracy
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Extending a wifi network
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Designing a simple fork withdesirable flexurecharacteristics
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Extending a wifi network
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Diagonal Size
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Diagonal Size
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Off Topic, Spam or Virus warning
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Diagonal Size
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] polishing plastic
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] polishing plastic
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] polishing plastic
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Designing a simple fork with desirableflexurecharacteristics
  • From: "Don D'Egidio" <djd521@comcast.net>
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: "Donald Good" <donald.good@comcast.net>
• Re: [ATM] ATM-Edwin Hubble's father was an ATMer
  • From: "Donald Good" <donald.good@comcast.net>
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: "Donald Good" <donald.good@comcast.net>
• [ATM] Silvering Woes
  • From: "Donald R. Bates" <dbates3@houston.rr.com>
• Re: [ATM] Silvering Woes
  • From: "Donald R. Bates" <dbates3@houston.rr.com>
• [ATM] Parts needed for a class
  • From: "Douglas Arion" <darion@carthage.edu>
• Re: [ATM] Gluing this mirror
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• Re: [ATM] 8" Diagonal- More info
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• Re: [ATM] 8" Diagonal- More info
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• Re: [ATM] Polar moment of inertia for a square tube?
  • From: fabio@voreas.com
• [ATM] Parts needed for a class
  • From: fhh@npgcable.com
• [ATM] Off Topic, Spam or Virus warning
  • From: fhh@npgcable.com
• Re: [ATM] Off Topic, Spam or Virus warning
  • From: Gary Woods <garygarlic@earthlink.net>
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] North pole drift
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Christmas greetings......
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Only two books allowed
  • From: GF <gary@rcn.com>
• [ATM] Off Topic, Spam or Virus warning
  • From: "Greg Jones" <gregj888@comcast.net>
• Re: [ATM] Extending a wifi network
  • From: gregj888@comcast.net
• Re: [ATM] Extending a wifi network
  • From: gregj888@comcast.net
• Re: [ATM] Only two books allowed
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Ronchi test accuracy
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] ronchi accuracy
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] recycling grit
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Extending a wifi network
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Only two books allowed
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] recycling grit
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Vacuum coating, was Silvering Woes
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] 8" Diagonal
  • From: Hugues.Laroche@ses-astra.com
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: info@stathis-firstlight.de
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: info@stathis-firstlight.de
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] Remove old mirror coating.
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] polishing plastic
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] Silvering Woes
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] Silvering Woes
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] Silvering Woes
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• [ATM] Vacuum coating, was Silvering Woes
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] Remove old mirror coating.
  • From: "James Mulherin" <jcmulherin@opticalmechanics.com>
• Re: [ATM] Remove old mirror coating.
  • From: "James Mulherin" <jcmulherin@opticalmechanics.com>
• Re: [ATM] ronchi accuracy
  • From: Jan Bentz <jbentz@inreach.com>
• Re: [ATM] ronchi accuracy
  • From: Jan Bentz <jbentz@inreach.com>
• Re: [ATM] ronchi accuracy
  • From: Jan Bentz <jbentz@inreach.com>
• [ATM] 8" F/4.2... Done?
  • From: Jason Hissong <jhissong@gmail.com>
• [ATM] 8" F/4.2... Really Done!
  • From: Jason Hissong <jhissong@gmail.com>
• Re: [ATM] ronchi accuracy
  • From: Jason Hissong <jhissong@gmail.com>
• [ATM] 8" F4.2 Back from coaters
  • From: Jason Hissong <jhissong@gmail.com>
• Re: [ATM] Silvering Woes
  • From: Jason Hissong <jhissong@gmail.com>
• Re: [ATM] Silvering Woes
  • From: "Jean-Marc Becker" <jmb-abonnements@wanadoo.fr>
• Re: [ATM] Remove old mirror coating.
  • From: "Jeff Baldwin" <bald@centurytel.net>
• Re: [ATM] recycling grit
  • From: "Jeff Baldwin" <bald@centurytel.net>
• [ATM] ATM: Kreig McBride
  • From: "Jeff Baldwin" <bald@centurytel.net>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: "Jeff Baldwin" <bald@centurytel.net>
• [ATM] pitch lap to guy and ken
  • From: jeff newsom <triolian@earthlink.net>
• [ATM] ronchi accuracy
  • From: jeff newsom <triolian@earthlink.net>
• [ATM] machine grinding
  • From: jeff newsom <triolian@earthlink.net>
• [ATM] ronchi testing/machine grinding
  • From: jeff newsom <triolian@earthlink.net>
• [ATM] recycling grit
  • From: jeff newsom <triolian@earthlink.net>
• Re: [ATM] Are these kits good? & Refractor Kits
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Are these kits good? & Refractor Kits
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Only two books allowed
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Extending a wifi network
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Ronchi test accuracy
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Extending a wifi network
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Diagonal Size
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Diagonal Size
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Diagonal Size
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Off Topic, Spam or Virus warning
  • From: Jerry Dove <jldove1@cableone.net>
• Re: [ATM] Designing a simple fork with desirableflexurecharacteristics
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• Re: [ATM] Extending a wifi network
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• Re: [ATM] OT: Polystyrene properties?
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• Re: [ATM] 8" F/4.2... Done?
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] ronchi accuracy
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Remove old mirror coating.
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Slight small toll
  • From: Jim Burrows <burrjaw@earthlink.net>
• [ATM] OT: Polystyrene properties?
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: [ATM] OT: Polystyrene properties?
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: [ATM] 8" F/4.2... Done?
  • From: Joe <nss@mwt.net>
• Re: [ATM] 8" F/4.2... Done?
  • From: Joe <nss@mwt.net>
• [ATM] How I Do It,,,
  • From: Joe <nss@mwt.net>
• Re: [ATM] Diagonal mirror size
  • From: Joe <nss@mwt.net>
• Re: [ATM] Diagonal Size
  • From: Joe <nss@mwt.net>
• Re: [ATM] Only two books allowed
  • From: John Lynch <john_lynch2005@yahoo.com>
• [ATM] Mounted glass filters
  • From: John Lynch <john_lynch2006@yahoo.com>
• [ATM] Suggestion for working on telescope tube/storage
  • From: John Lynch <john_lynch2006@yahoo.com>
• Re: [ATM] mirror grinding
  • From: "John Sherman" <atm@mail.johnspics.com>
• Re: [ATM] ronchi accuracy
  • From: "John Sherman" <atm@mail.johnspics.com>
• [ATM] Stars
  • From: "John Sherman" <atm@mail.johnspics.com>
• Re: [ATM] Diagonal Size
  • From: "John Sherman" <atm@mail.johnspics.com>
• Re: [ATM] Off Topic, Spam or Virus warning
  • From: "John Sherman" <atm@mail.johnspics.com>
• Re: [ATM] Baffling Wynne corrector
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Parts needed for a class
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• [ATM] Care package to Pakistan
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• [ATM] Package address
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• [ATM] [Fwd: Amateur Telescope Mount needs a good home]
  • From: Ken Lowther <klowther@cisnet.com>
• [ATM] opps
  • From: Ken Lowther <klowther@cisnet.com>
• Re: [ATM] Remove old mirror coating.
  • From: "Ken Reid" <kreid@primus.ca>
• Re: [ATM] Only two books allowed
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Only two books allowed
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Extending a wifi network
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Extending a wifi network: Parabolic Dish Reflector
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Extending a wifi network: Parabolic Dish Reflector
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Extending a wifi network
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Extending a wifi network: power by klystron tube
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Extending a wifi network
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] polishing plastic
  • From: "Lafotec" <lafotec@thewaynet.com.br>
• Re: [ATM] Only two books allowed
  • From: Lawrence Sayre <lsayre@neo.rr.com>
• [ATM] Oblate spheroid ?
  • From: Mahmood Hassan <emhl95@yahoo.com>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• Re: [ATM] Diagonal mirror size
  • From: Mark Holm <mdholm@telerama.com>
• [ATM] Gluing this mirror
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Diagonal Size
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Diagonal Size
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Off Topic, Spam or Virus warning
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] 8" Diagonal
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] 8" Diagonal- More info
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] 8" Diagonal- More info
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Silvering Woes
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: "Martti KOskimo" <martti.koskimo@kolumbus.fi>
• Re: [ATM] Extending a wifi network
  • From: "matt" <electro_optic@bellsouth.net>
• Re: [ATM] Off Topic, Spam or Virus warning
  • From: Matt Considine <matt@considine.net>
• Re: [ATM] ronchi accuracy
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Christmas Present?
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] ronchi accuracy
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] 8" Diagonal- More info
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• [ATM] Extending a wifi network
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Extending a wifi network
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Extending a wifi network
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] ronchi accuracy
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] ronchi accuracy
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] artificial convex curve for pitch lap
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Only two books allowed
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] 8" F/4.2... Done?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Ronchi test accuracy
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] 8" Diagonal
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] 8" Diagonal
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Only two books allowed
  • From: Mike Shuken <mikeshuken@value.net>
• Re: [ATM] Extending a wifi network
  • From: Mike Warne <mike.warne@gmail.com>
• Re: [ATM] Extending a wifi network
  • From: Mike Warne <mike.warne@gmail.com>
• Re: [ATM] Only two books allowed
  • From: "Mike Wolford" <mwolford@ccrtcblue.com>
• [ATM] Slight small toll
  • From: mjlazo@ifsc.usp.br
• Re: [ATM] 8" F/4.2... Done?
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] ronchi accuracy
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] ronchi accuracy
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• [ATM] Diagonal Size
  • From: ntent <ntent@pctcnet.net>
• Re: [ATM] Diagonal Size
  • From: ntent <ntent@pctcnet.net>
• Re: [ATM] Diagonal size_ Vladimir
  • From: ntent <ntent@pctcnet.net>
• Re: [ATM] Silvering Woes
  • From: Pete <lenses@adelphia.net>
• [ATM] Baffling Wynne corrector
  • From: Polaraligned <polaraligned@optonline.net>
• Re: [ATM] Baffling Wynne corrector
  • From: Polaraligned <polaraligned@optonline.net>
• Re: [ATM] Baffling Wynne corrector
  • From: Polaraligned <polaraligned@optonline.net>
• Re: [ATM] Baffling Wynne corrector
  • From: Polaraligned <polaraligned@optonline.net>
• Re: [ATM] Only two books allowed
  • From: Polaraligned <polaraligned@optonline.net>
• Re: [ATM] Designing a simple fork with desirable flexurecharacteristics
  • From: Polaraligned <polaraligned@optonline.net>
• Re: [ATM] Designing a simple fork with desirable
  • From: Polaraligned <polaraligned@optonline.net>
• [ATM] Diagonal Size
  • From: Polaraligned <polaraligned@optonline.net>
• Re: [ATM] Diagonal Size
  • From: Polaraligned <polaraligned@optonline.net>
• [ATM] 8" Diagonal
  • From: Polaraligned <polaraligned@optonline.net>
• [ATM] 8" Diagonal- More info
  • From: Polaraligned <polaraligned@optonline.net>
• [ATM] 8" Diagonal- More info
  • From: Polaraligned <polaraligned@optonline.net>
• [ATM] 8" Diagonal- More info
  • From: Polaraligned <polaraligned@optonline.net>
• Re: [ATM] Polar moment of inertia for a square tube?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Parts needed for a class
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Designing a simple fork with desirable flexurecharacteristics
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Designing a simple fork with desirableflexurecharacteristics
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Only two books allowed
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Diagonal mirror size
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Stars
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] ronchi accuracy
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Diagonal Size
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Oblate spheroid ?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] polishing plastic
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] polishing plastic
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Christmas greetings......
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Are these kits good?
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Are these kits good? & Refractor Kits
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] 150 mm f/15 Doublet
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Christmas Present?
  • From: Richard Ozer <rozer@pacbell.net>
• Re: [ATM] Only two books allowed
  • From: Rick M <optical_stargazer@yahoo.com>
• Re: [ATM] machine grinding
  • From: "Rod Brackenridge" <rjbr@lycos.com>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: "Rod Brackenridge" <rjbr@lycos.com>
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: "RodShea" <RodShea@comcast.net>
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: "RodShea" <RodShea@comcast.net>
• Re: [ATM] Care package to Pakistan
  • From: Saqib Sajjad <saqibsajjad@yahoo.com>
• Re: [ATM] Newt imaging vs visual design tradeoffs -- ideas?
  • From: Scott Carson <scottcarson@austin.rr.com>
• Re: [ATM] Diagonal Size
  • From: Scott Carson <scottcarson@austin.rr.com>
• Re: [ATM] Remove old mirror coating.
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] Off Topic, Spam or Virus warning
  • From: Sergeant Pinback <pinbackakabillfreug@yahoo.com>
• Re: [ATM] Off Topic, Spam or Virus warning
  • From: Sergeant Pinback <pinbackakabillfreug@yahoo.com>
• [ATM] flat query
  • From: shyam rathod <iloveyawli@yahoo.com>
• Re: [ATM] Off Topic, Spam or Virus warning
  • From: Stan Truitt <s.truitt@verizon.net>
• [ATM] A Question
  • From: Starglass@adelphia.net
• [ATM] [Fwd: Re: [cave_telescopes] 2" adapter for Cave 2" focuser]
  • From: Starglass@adelphia.net
• [ATM] Flat grinding the back of the primary mirror
  • From: "Terin Lyr D'Amico" <terin.damico@verizon.net>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: "Terin Lyr D'Amico" <terin.damico@verizon.net>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: "Terin Lyr D'Amico" <terin.damico@verizon.net>
• Re: [ATM] only two books allowed
  • From: "The Alarm Co." <tac@i1.net>
• Re: [ATM] Only two books allowed
  • From: "Thomas A. Moulton" <tom@moulton.us>
• [ATM] Christmas greetings......
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• Re: [ATM] flat query
  • From: "Thomas Janstrom" <tomjan@ozemail.com.au>
• [ATM] Remove old mirror coating.
  • From: TN55@aol.com
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] Baffling Wynne corrector
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• [ATM] Polar moment of inertia for a square tube?
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] Polar moment of inertia for a square tube?
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] Baffling Wynne corrector
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• [ATM] Designing a simple fork with desirable flexure characteristics
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] Designing a simple fork with desirable flexurecharacteristics
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] Designing a simple fork with desirable flexurecharacteristics
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] Designing a simple fork with desirable flexurecharacteristics
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] Designing a simple fork with desirable flexurecharacteristics
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] machine grinding
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] Gluing this mirror
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] 8" Diagonal
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] 8" Diagonal- More info
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] 8" Diagonal- More info
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] Extending a wifi network
  • From: "Tom Moulton" <tom@moulton.us>
• Re: [ATM] recycling grit
  • From: "Tom Moulton" <tom@moulton.us>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "Ukyo Chen" <ukyochen888@hotmail.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "Ukyo Chen" <ukyochen888@hotmail.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "Ukyo Chen" <ukyochen888@hotmail.com>
• Re: [ATM] Designing a simple fork with desirable flexurecharacteristics
  • From: "Virgil.Johnson" <virgilaj@charter.net>
• Re: [ATM] Diagonal mirror size
  • From: "vladimir" <svla@isp.com>
• Re: [ATM] Diagonal mirror size
  • From: "vladimir" <svla@isp.com>
• Re: [ATM] Diagonal mirror size
  • From: "vladimir" <svla@isp.com>
• Re: [ATM] Diagonal Size
  • From: "vladimir" <svla@isp.com>
• Re: [ATM] Diagonal Size
  • From: "vladimir" <svla@isp.com>
• Re: [ATM] Diagonal Size
  • From: "vladimir" <svla@isp.com>
• [ATM] Another flat-field anastigmatic aplant
  • From: "vladimir" <svla@isp.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "vladimir" <svla@isp.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "vladimir" <svla@isp.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "vladimir" <svla@isp.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "vladimir" <svla@isp.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "vladimir" <svla@isp.com>
• Re: [ATM] Another flat-field anastigmatic aplant
  • From: "vladimir" <svla@isp.com>
• Re: [ATM] 8" Diagonal- More info
  • From: "vladimir" <svla@isp.com>
• Re: [ATM] Mirror Cells - Springs vs. Push/Pull
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• [ATM] North pole drift
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Remove old mirror coating.
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Oblate spheroid ?
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Oblate spheroid ?
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] polishing plastic
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] ronchi accuracy
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] recycling grit
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Flat grinding the back of the primary mirror
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• [ATM] Winter at the scope werks
  • From: vorblesnak@peak.org
• [ATM] 15.5 Ultra Thin pictures posted
  • From: vorblesnak@peak.org
• [ATM] The 15.5 Ultra Thin
  • From: vorblesnak@peak.org
• Re: [ATM] The 15.5 Ultra Thin Lap Discussion
  • From: vorblesnak@peak.org
• [ATM] Off Topic, Spam or Virus warning
  • From: vorblesnak@peak.org
• [ATM] Off Topic, Spam or Virus warning
  • From: vorblesnak@peak.org
• Re: [ATM] Silvering Woes
  • From: William Marriott <bmarriott@pacbell.net>