Amateur Telescope Makers (ATM) Archive for DEC04 - by thread

• Author Index

• Re: [ATM] Eyepiece changes and balance problems, DHA352
• [ATM] (no subject), DHA352
• Re: [ATM] .707*Radius, Lawrence Sayre
  • <Possible follow-up(s)>
  • Re: [ATM] .707*Radius, Arjan te Marvelde
    • Re: [ATM] .707*Radius, Jeff Anderson-Lee
  • Re: [ATM] .707*Radius, Mark Holm
    • Re: [ATM] .707*Radius, Jeff Anderson-Lee
      • RE: [ATM] .707*Radius (long), Donald Good
• RE: [ATM] .707*Radius (long), Ken Hunter
  • RE: [ATM] .707*Radius (long), Donald Good
• [ATM] 16" cell ideas, vorblesnak
• [ATM] 16" mirror, Alan K. Henderson
• [ATM] 20" Mirror, Gilbert Gagne
  • Re: [ATM] 20" Mirror, Vladimir Galogaza
    • Re: [ATM] 20" Mirror, Mel Bartels
      • [ATM] Magnitude Limit in Telescope, Stathis Kafalis
      • Re: [ATM] Magnitude Limit in Telescope, David O. Trevino
      • Re: [ATM] Magnitude Limit in Telescope, Scott Ewart
      • Re: [ATM] Magnitude Limit in Telescope, Mel Bartels
      • RE: [ATM] Magnitude Limit in Telescope, Richard Klappal
      • Re: [ATM] Magnitude Limit in Telescope, Wouter van Reeven
    • Re: [ATM] 20" Mirror, Jerry B. Hillman
  • <Possible follow-up(s)>
  • Re: [ATM] 20" Mirror, john sherman
• [ATM] 24" f/4 lightweight Dob, Cord Scholz
  • RE: [ATM] 24" f/4 lightweight Dob, Peter
    • RE: [ATM] 24" f/4 lightweight Dob, Cord Scholz
  • <Possible follow-up(s)>
  • RE: [ATM] 24" f/4 lightweight Dob, Mark Holm
    • RE: [ATM] 24" f/4 lightweight Dob, Cord Scholz
  • Re: [ATM] 24" f/4 lightweight Dob, NGC704
• [ATM] 3 point cell for 12 inch ?, Treur, Harro
  • Re: [ATM] 3 point cell for 12 inch ?, Jeff Anderson-Lee
    • Re: [ATM] 3 point cell for 12 inch ?, Mark Holm
• [ATM] 40" mirror, Jerry B. Hillman
  • Re: [ATM] 40" mirror, Jeff Anderson-Lee
    • Re: [ATM] 40" mirror, Jerry B. Hillman
      • Re: [ATM] 40" mirror, Ken Lowther
      • Re: [ATM] 40" mirror, Jeff Anderson-Lee
      • Re: [ATM] 40" mirror, Jerry B. Hillman
      • Re: [ATM] 40" mirror, Ken Lowther
      • Re: [ATM] 40" mirror, Dale Eason
      • Re: [ATM] 40" mirror, Jeff Anderson-Lee
  • RE: [ATM] 40" mirror, Richard Klappal
  • Re: [ATM] 40" mirror, Ken Hunter
    • Re: [ATM] 40" mirror, Jerry B. Hillman
    • [ATM] Re: 40" mirror, Mike Conran
  • [ATM] Re: 40" mirror, Mike Conran
  • <Possible follow-up(s)>
  • [ATM] 40" mirror, Jay Kirkland
    • Re: [ATM] 40" mirror, Jerry B. Hillman
      • Re: [ATM] 40" mirror, Jeff Anderson-Lee
      • Re: [ATM] 40" mirror, Jerry B. Hillman
      • [ATM] Re: 40" mirror, Mike Conran
    • [ATM] Strange Chinese Telescope Design f/3.6, spherical mirror, Guy Brandenburg
      • Re: [ATM] Strange Chinese Telescope Design f/3.6, spherical mirror, Don Ware
      • Re: [ATM] Strange Chinese Telescope Design f/3.6, spherical mirror, George Anderson
      • Re: [ATM] Strange Chinese Telescope Design f/3.6, spherical mirror, Guy Brandenburg
      • Re: [ATM] Strange Chinese Telescope Design f/3.6, spherical mirror, Bob May
  • Re: [ATM] 40" mirror, matt
  • Re: [ATM] 40" mirror, matt
    • Re: [ATM] 40" mirror, Ken Lowther
    • Re: [ATM] 40" mirror, Mel Bartels
    • Re: [ATM] 40" mirror, Jerry B. Hillman
      • [ATM] Re: 40" mirror, Mike Conran
      • RE: [ATM] 40" mirror, Donald Good
  • Re: [ATM] 40" mirror, matt
  • [ATM] 40" mirror, Jay Kirkland
  • Re: [ATM] 40" mirror, Jerry B. Hillman
  • Re: [ATM] 40" mirror, matt
    • Re: [ATM] 40" mirror, Jerry B. Hillman
      • [ATM] Re: 40" mirror, Mike Conran
      • [ATM] Re: 40" mirror Annealing stats for Pyrex, Mike Conran
      • [ATM] Re: 40" mirror more on Pyrex, Mike Conran
      • [ATM] Re: 40" mirror Pyrex anneal rates, Mike Conran
      • [ATM] Re: 40" mirror Pyrex glass, Mike Conran
      • [ATM] Re: 40" mirror -- Glass terms, Mike Conran
  • Re: [ATM] 40" mirror, matt
  • Re: [ATM] 40" mirror, DHA352
  • Re: [ATM] 40" mirror, Tom and Beth
    • Re: [ATM] 40" mirror, Jerry B. Hillman
• [ATM] 40" mirror some ideas, vorblesnak
  • Re: [ATM] 40" mirror some ideas, Mel Bartels
    • Re: [ATM] 40" mirror some ideas, Jerry B. Hillman
      • Re: [ATM] 40" mirror some ideas, jroweapp
      • Re: [ATM] 40" mirror some ideas, Mel Bartels
    • RE: [ATM] 40" mirror some ideas, Scott Milligan
  • <Possible follow-up(s)>
  • [ATM] 40" mirror some ideas, vorblesnak
    • Re: [ATM] 40" mirror some ideas, Jean-Guy Moreau
      • Re: [ATM] 40' mirror some ideas, vorblesnak
      • Re: [ATM] 40" mirror some ideas, Anthony Stillman
      • Re: [ATM] 40" mirror some ideas, Jean-Guy Moreau
      • Re: [ATM] 40" mirror some ideas, Vladimir Galogaza
      • Re: [ATM] 40" mirror some ideas, Ken Lowther
      • Re: [ATM] 40" mirror some ideas, Jean-Guy Moreau
      • RE: [ATM] 40" mirror some ideas, Thomas
      • Re: [ATM] 40" mirror some ideas, Jean-Guy Moreau
      • Re: [ATM] 40" mirror some ideas, Jeff Anderson-Lee
      • Re: [ATM] 40" mirror some ideas, Jeff Anderson-Lee
      • Re: [ATM] 40" mirror some ideas, Anthony Stillman
      • Re: [ATM] 40" mirror some ideas, Jean-Guy Moreau
      • Re: [ATM] 40" mirror some ideas, Jeff Anderson-Lee
  • Re: [ATM] 40" mirror some ideas, matt
    • RE: [ATM] 40" mirror some ideas, Jerry Reddell
      • RE: [ATM] 40" mirror some ideas, Ken Hunter
      • RE: [ATM] 40" mirror some ideas, Jerry Reddell
      • RE: [ATM] 40" mirror some ideas, Ric Rokosz
    • Re: [ATM] 40" mirror some ideas, Jeff Anderson-Lee
      • Re: [ATM] 40" mirror some ideas, Jean-Guy Moreau
      • Re: [ATM] 40" mirror some ideas, Jeff Anderson-Lee
  • Re: [ATM] 40" mirror some ideas, matt
    • Re: [ATM] 40" mirror some ideas, Ric Rokosz
  • [ATM] 40" mirror some ideas, Jay Kirkland
  • RE: [ATM] 40" mirror some ideas, Ellen Mackenzie
  • Re: [ATM] 40" mirror some ideas, matt
    • Re: [ATM] 40" mirror some ideas, Jeff Anderson-Lee
      • Re: [ATM] 40" mirror some ideas, Vladimir Galogaza
      • Re: [ATM] 40" mirror some ideas, Ric Rokosz
      • Re: [ATM] 40" mirror some ideas, Jeff Anderson-Lee
  • Re: [ATM] 40" mirror some ideas, matt
    • Re: [ATM] 40" mirror some ideas, Jean-Guy Moreau
    • RE: [ATM] 40" mirror some ideas, Donald Good
  • Re: [ATM] 40" mirror some ideas, matt
    • Re: [ATM] 40" mirror some ideas, Patrick St. Jean
      • RE: [ATM] 40" mirror some ideas, Donald Good
  • RE: [ATM] 40" mirror some ideas, Patrick St. Jean
    • RE: [ATM] 40" mirror some ideas, Ken Hunter
      • Re: [ATM] 40" mirror some ideas, Richard F.L.R. Snashall
• [ATM] 770 primer with Loctite Prism 401, artbianconi
  • [ATM] Re: 770 primer with Loctite Prism 401, Don Clement
• [ATM] A simple scope (Pictures), vorblesnak
  • Re: [ATM] A simple scope (Pictures), Woodchuck
• [ATM] A Touching Problem, Lee Chin Huat
  • Re: [ATM] A Touching Problem, Jerry B. Hillman
  • Re: [ATM] A Touching Problem, Guy Brandenburg
  • Re: [ATM] A Touching Problem, Ken Lowther
  • Re: [ATM] A Touching Problem, Bob May
• [ATM] about the autocollimator, Nils Olof Carlin
• [ATM] accuracy in the home shop, Ina Ron Lippard Renaissance Reproductions
• Re: [ATM] All about hydrostone tools, jsmclean1
  • Re: [ATM] All about hydrostone tools, Mike Lockwood
  • <Possible follow-up(s)>
  • Re: [ATM] All about hydrostone tools, mdholm
• [ATM] ANY LENS IN DIGITAL PHOTOCOPY MACHINE ?, Lee Chin Huat
  • Re: [ATM] ANY LENS IN DIGITAL PHOTOCOPY MACHINE ?, Jerry B. Hillman
  • Re: [ATM] ANY LENS IN DIGITAL PHOTOCOPY MACHINE ?, Dave Smith
• [ATM] ATM Dave Williams and his 3/4" x 20" attempt at a TelescopeMirror, Russell Jocoy
  • Re: [ATM] ATM Dave Williams and his 3/4" x 20" attempt at a TelescopeMirror, Jeff Anderson-Lee
  • Re: [ATM] ATM Dave Williams and his 3/4" x 20" attempt at aTelescopeMirror, Bill Kelley
• [ATM] ATM: Fifth Annual Mid-Atlantic Mirror Making Seminar, Dr. Wm. D. Hanagan, Jr.
• [ATM] balancing a light scope, artbianconi
• [ATM] balancing a serrurier truss, Andreas Derwahl
  • <Possible follow-up(s)>
  • [ATM] balancing a serrurier truss, Jay Kirkland
    • Re: [ATM] balancing a serrurier truss, Scott Ewart
      • Re: [ATM] balancing a serrurier truss, Andreas Derwahl
  • Re: [ATM] balancing a serrurier truss, jeffmorgan
    • Re: [ATM] balancing a serrurier truss, Jim Miller
• [ATM] balancing a seurrier truss, Jay Kirkland
• [ATM] Beer bottles & producing a glass blank for a telescope, Russell Jocoy
  • Re: [ATM] Beer bottles & producing a glass blank for a telescope, Jean-Guy Moreau
  • <Possible follow-up(s)>
  • Re: [ATM] Beer bottles & producing a glass blank for a telescope, mconsidine@netreach.net
  • Re: [ATM] Beer bottles & producing a glass blank for a telescope, Matt Considine
• [ATM] Best webcam/ccd for Foucaultgrams?, Ric Rokosz
  • Re: [ATM] Best webcam/ccd for Foucaultgrams?, Dale Eason
  • Re: [ATM] Best webcam/ccd for Foucaultgrams?, Dominic-Luc Webb
    • Re: [ATM] Best webcam/ccd for Foucaultgrams?, Ric Rokosz
  • <Possible follow-up(s)>
  • [ATM] Best webcam/ccd for Foucaultgrams?, Gilbert Gagne
    • RE: [ATM] Best webcam/ccd for Foucaultgrams?, Jerry Reddell
• [ATM] Cassegrain Secondary testing, Mike Lockwood
• [ATM] Celestial Solstice (Belated), Richard F.L.R. Snashall
  • Re: [ATM] Fluorite Instance, Richard F.L.R. Snashall
• [ATM] Cell for David, Mark Holm
  • Re: [ATM] Cell for David, Jeff Anderson-Lee
  • Re: [ATM] Cell for David, Nils Olof Carlin
  • [ATM] Re: Cell for David, Mark Holm
  • Re: [ATM] Cell for David, Ken Hunter
    • Re: [ATM] Cell for David, Vladimir Galogaza
    • Re: [ATM] Cell for David, Jeff Anderson-Lee
    • Re: [ATM] Cell for David, Mark Holm
  • Re: [ATM] Cell for David, Jeff Anderson-Lee
    • Re: [ATM] Cell for David, Ken Hunter
      • Re: [ATM] Cell for David, Jeff Anderson-Lee
• [ATM] Collapsing truss poles, Jay Kirkland
  • Re: [ATM] Collapsing truss poles, Ross Sackett
  • Re: [ATM] Collapsing truss poles, Bob May
  • <Possible follow-up(s)>
  • RE: [ATM] Collapsing truss poles, Treur, Harro
    • RE: [ATM] Collapsing truss poles, Peter
      • RE: [ATM] Collapsing truss poles, Peter
      • Re: [ATM] Collapsing truss poles, Rod Shea
  • RE: [ATM] Collapsing truss poles, john sherman
    • Re: [ATM] Collapsing truss poles, Bob May
  • RE: [ATM] Collapsing truss poles, john sherman
  • Re: [ATM] Collapsing truss poles, Hugues.Laroche
  • RE: [ATM] Collapsing truss poles, Treur, Harro
• [ATM] Cutting large holes in aluminum, Don Clement
  • Re: [ATM] Cutting large holes in aluminum, Don D'Egidio
    • Re: [ATM] Cutting large holes in aluminum, Don Clement
• [ATM] Cutting Multiple Tubes, Same Length, Gilbert Gagne
  • <Possible follow-up(s)>
  • Re: [ATM] Cutting Multiple Tubes, Same Length, Jarvis Krumbein
• [ATM] cutting tube in the first generation, Ina Ron Lippard Renaissance Reproductions
• [ATM] defocus in holographic null test, Koehler, Steve
• [ATM] Density of Baltic Birch, jeffmorgan
  • Re: [ATM] Density of Baltic Birch, Gilbert Gagne
    • Re: [ATM] Density of Baltic Birch, Ross Sackett
  • <Possible follow-up(s)>
  • [ATM] Density of Baltic Birch, Jay Kirkland
  • Re: [ATM] Density of Baltic Birch, Arjan te Marvelde
• [ATM] dew heater circuit questions, Dave Smith
  • Re: [ATM] dew heater circuit questions, Mike Lockwood
    • Re: [ATM] dew heater circuit questions, Don Clement
      • Re: [ATM] dew heater circuit questions, Dave Smith
      • Re: [ATM] dew heater circuit questions, Scott Ewart
      • Re: [ATM] dew heater circuit questions, Don Clement
      • Re: [ATM] dew heater circuit questions, Scott Ewart
      • Re: [ATM] dew heater circuit questions, Don Clement
      • Re: [ATM] dew heater circuit questions, Vladimir Galogaza
      • Re: [ATM] dew heater circuit questions, Don Clement
      • Re: [ATM] dew heater ..Resistive Paint, Malcolm Macdonald
      • Re: [ATM] dew heater ..Resistive Paint, Bob May
      • RE: [ATM] dew heater ..Resistive Paint, Jerry Reddell
  • <Possible follow-up(s)>
  • Re: [ATM] dew heater circuit questions, mdholm
  • Re: [ATM] dew heater circuit questions, Mark Holm
• Re: [ATM] dew heater circuit questions-MORE Q's, Dave Smith
• [ATM] ETX 70, HalbertMusik
  • Re: [ATM] ETX 70, Wouter van Reeven
• RE: [ATM] Eyepiece changes and balance problems, Donald Good
• Re: [ATM] Eyepiece in question, Maingot Fabrice
  • Re: [ATM] Eyepiece in question, Bob May
• [ATM] Figuring Help On a 6" F7, COO
  • Re: [ATM] Figuring Help On a 6" F7, Jim Burrows
  • <Possible follow-up(s)>
  • Re: [ATM] Figuring Help On a 6" F7, Mark Holm
• [ATM] finding Bill, David Williams
• [ATM] First successful view using my home built mirror tester., Jerry Reddell
• [ATM] first tool, Jan van Gastel
  • RE: [ATM] first tool, Thomas
  • Re: [ATM] first tool, Ken Lowther
  • Re: [ATM] first tool, Bob May
  • Re: [ATM] first tool, Ken Hunter
• [ATM] First view through 10" f5, Jerry Reddell
• [ATM] Focal plane-Where is it?, Rob&DonnaF
  • Re: [ATM] Focal plane-Where is it?, Ken Hunter
  • Re: [ATM] Focal plane-Where is it?, Mike Lockwood
• [ATM] focal reducer, David Williams
• [ATM] Foucault diagram, David Williams
• [ATM] FW: Oslo short, Ellen Mackenzie
  • Re: [ATM] FW: Oslo short, Ric Rokosz
  • Re: [ATM] FW: Oslo short, Woodchuck
• [ATM] FW: re mirror support, Ellen Mackenzie
  • Re: [ATM] FW: re mirror support, Michael Lindner
• [ATM] FW: re: 40" mirror Ideas, Ellen Mackenzie
• Re: [ATM] glue, Dominic-Luc Webb
  • <Possible follow-up(s)>
  • Re: [ATM] glue, DHA352
  • Re: [ATM] glue, Mark Holm
    • Re: [ATM] glue, George Anderson
      • Re: [ATM] glue, luth-astro
• [ATM] Graphite question, and yes this is on topic!, Thomas
  • Re: [ATM] Graphite question, and yes this is on topic!, Don Clement
  • <Possible follow-up(s)>
  • Re: [ATM] Graphite question, and yes this is on topic!, mdholm
    • RE: [ATM] Graphite question, and yes this is on topic!, Thomas
      • RE: [ATM] Graphite question, and yes this is on topic!, mdholm
• [ATM] Hartmann (1D) upgrade., Jim Burrows
• [ATM] hilux mirror coatings, marco miglionico
  • <Possible follow-up(s)>
  • RE: [ATM] hilux mirror coatings, Treur, Harro
    • RE: [ATM] hilux mirror coatings, Frans Franssen
• [ATM] Holographic Foucault null test, Mauritz Andersson
  • Re: [ATM] Holographic Foucault null test, Guy Brandenburg
    • Re: [ATM] Holographic Foucault null test, Mauritz Andersson
  • Re: [ATM] Holographic Foucault null test, Bob May
    • Re: [ATM] Holographic Foucault null test, Guy Brandenburg
      • Re: [ATM] Holographic Foucault null test, Ric Rokosz
  • RE: [ATM] Holographic Foucault null test, Jerry
  • Re: [ATM] Holographic Foucault null test, Vladimir Galogaza
    • Re: [ATM] Holographic Foucault null test, Mauritz Andersson
  • <Possible follow-up(s)>
  • Re: RE: [ATM] Holographic Foucault null test, lenses
  • Re: [ATM] Holographic Foucault null test, Mark Holm
    • Re: [ATM] Holographic Foucault null test, Mauritz Andersson
  • Re: [ATM] Holographic Foucault null test, matt
  • Re:[ATM] Holographic Foucault null test, dmikk2
    • Re:[ATM] Holographic Foucault null test, Mauritz Andersson
  • Re: [ATM] Holographic Foucault null test, Ric Rokosz
  • Re:[ATM] Holographic Foucault null test, Arjan te Marvelde
  • Re:[ATM] Holographic Foucault null test, Mark Holm
• RE: [ATM] Huge lens on ebay, Jerry
• [ATM] I'm back, did you notice I was gone?, vorblesnak
  • Re: [ATM] I'm back, did you notice I was gone?, Jeff Anderson-Lee
• [ATM] Interesting Doublet, Richard F.L.R. Snashall
  • Re: [ATM] Interesting Doublet, Bob May
  • <Possible follow-up(s)>
  • Re: [ATM] Interesting Doublet, Bob May
• [ATM] Interpreting DK secondary interference test, Rod Brackenridge
  • Re: [ATM] Interpreting DK secondary interference test, Bob May
  • Re: [ATM] Interpreting DK secondary interference test, Mike Lockwood
  • <Possible follow-up(s)>
  • Re: [ATM] Interpreting DK secondary interference test, Rod Brackenridge
    • Re: [ATM] Interpreting DK secondary interference test, Mike Lockwood
    • Re: [ATM] Interpreting DK secondary interference test, Mark Suchting
    • Re: [ATM] Interpreting DK secondary interference test, Bob May
  • Re: [ATM] Interpreting DK secondary interference test, Aplanatic
  • Re: [ATM] Interpreting DK secondary interference test, Rod Brackenridge
    • Re: [ATM] Interpreting DK secondary interference test, Mike Lockwood
• [ATM] list maintenance notice, simo ivanov
  • [ATM] making glass, Jerry B. Hillman
    • Re: [ATM] making glass, Ken Lowther
    • RE: [ATM] making glass, Martin Lyons
    • Re: [ATM] making glass, Woodchuck
    • RE: [ATM] making glass, Donald Good
  • [ATM] maintenance complete, simo ivanov
• [ATM] Mak corrector plates etc., Thomas
  • Re: [ATM] Mak corrector plates etc., Dominic-Luc Webb
  • Re: [ATM] Mak corrector plates etc., Bob May
    • Re: [ATM] Mak corrector plates etc., Ken Hunter
      • Re: [ATM] Mak corrector plates etc., Bob May
  • <Possible follow-up(s)>
  • RE: [ATM] Mak corrector plates etc., Thomas
    • Re: [ATM] Mak corrector plates etc., Richard F.L.R. Snashall
• Re: [ATM] making glass, Mark Holm
  • Re: [ATM] making glass, Ken Lowther
    • [ATM] Re: making glass, Mike Conran
    • Re: [ATM] making glass, Jerry B. Hillman
  • [ATM] Re: making glass, Mike Conran
  • <Possible follow-up(s)>
  • Re: [ATM] making glass, Mark Holm
  • Re: [ATM] making glass, Jerry B. Hillman
  • Re: [ATM] making glass, Mark Holm
• [ATM] Making glass blanks, vorblesnak
• [ATM] making glass versus melting glass, Jerry B. Hillman
  • RE: [ATM] making glass versus melting glass, Donald Good
  • <Possible follow-up(s)>
  • Re: [ATM] making glass versus melting glass, Jarvis Krumbein
• [ATM] Materials other than Pyrex, John Lynch
  • Re: [ATM] Materials other than Pyrex, Jeff Anderson-Lee
  • <Possible follow-up(s)>
  • Re: [ATM] Materials other than Pyrex, lenses
  • Re: [ATM] Materials other than Pyrex, Mark Holm
• [ATM] Melting glass, and using basic compounds to fuse.., Russell Jocoy
  • Re: [ATM] Melting glass, and using basic compounds to fuse.., Jerry B. Hillman
    • Re: [ATM] Melting glass, and using basic compounds to fuse.., Stuart Hutchins
• [ATM] Messag from list owner regarding Plop, etc., Michael Lindner
• [ATM] my resolved 20", David Williams
• [ATM] Need some guidance interpreting focualt results, Scott Krallman
  • Re: [ATM] Need some guidance interpreting focualt results, Ken Hunter
  • Re: [ATM] Need some guidance interpreting focualt results, Bob May
• [ATM] Next advances is cell design.., Jerry Reddell
  • <Possible follow-up(s)>
  • Re:[ATM] Next advances is cell design.., Mark Holm
    • RE: [ATM] Next advances is cell design.., Jerry Reddell
      • Re: [ATM] Next advances is cell design.., Mark Holm
      • Re: [ATM] Next advances is cell design.., Mark Holm
    • RE: [ATM] Next advances is cell design.., Jerry Reddell
  • Re: [ATM] Next advances is cell design.., matt
    • Re: [ATM] Next advances is cell design.., Dale Eason
  • Re: [ATM] Next advances is cell design.., Mark Holm
    • RE: [ATM] Next advances is cell design.., Jerry Reddell
  • Re: [ATM] Next advances is cell design.., matt
    • Re: [ATM] Next advances is cell design.., Jeff Anderson-Lee
  • RE: [ATM] Next advances is cell design.., Mark Holm
  • FW: [ATM] Next advances is cell design.., Jerry Reddell
  • Re: [ATM] Next advances is cell design.., matt
    • Re: [ATM] Next advances is cell design.., Jeff Anderson-Lee
      • Re: [ATM] Next advances is cell design.., Michael Peck
    • Re: [ATM] Next advances is cell design.., Jeff Anderson-Lee
  • Re: [ATM] Next advances is cell design.., Mark Holm
  • Re: [ATM] Next advances is cell design.., Mark Holm
  • RE: [ATM] Next advances is cell design.., Treur, Harro
• [ATM] next breath and looking through it, Ina Ron Lippard Renaissance Reproductions
• [ATM] Odd thoughts and observations and learning from errors, Guy Brandenburg
  • [ATM] BK-1, Richard Ozer
    • Re: [ATM] BK-1, Richard F.L.R. Snashall
  • Re: [ATM] Odd thoughts and observations and learning from errors, James Lerch
  • Re: [ATM] Odd thoughts and observations and learning from errors, Michael Lindner
  • Re: [ATM] Odd thoughts and observations and learning from errors, Ken Lowther
    • Re: [ATM] Odd thoughts and observations and learning from errors, Guy Brandenburg
• [ATM] OSLO short, Richard F.L.R. Snashall
  • Re: [ATM] OSLO short, Richard F.L.R. Snashall
  • Re: [ATM] Newtonian Corrector (was OSLO short), Richard F.L.R. Snashall
  • <Possible follow-up(s)>
  • [ATM] Oslo short, Ellen Mackenzie
• [ATM] OT: Question for David Williams, GARY FUCHS
• [ATM] Paul-Baker, Gregorian variety, vladimir sacek
  • RE: [ATM] Paul-Baker, Gregorian variety, Jerry Reddell
• [ATM] PLOP Assumptions, artbianconi
  • Re: [ATM] PLOP Assumptions, Dale Eason
  • <Possible follow-up(s)>
  • [ATM] PLOP Assumptions, artbianconi
    • [ATM] Re: PLOP Assumptions, Nils Olof Carlin
      • Re: [ATM] Re: PLOP Assumptions, Bob May
  • Re: [ATM] PLOP Assumptions, Mark Holm
    • Re: [ATM] PLOP Assumptions, Nils Olof Carlin
    • Re: [ATM] PLOP Assumptions, Bob May
      • Re: [ATM] PLOP Assumptions, Mel Bartels
      • Re: [ATM] PLOP Assumptions, Bob May
      • Re: [ATM] PLOP Assumptions, Mel Bartels
      • Re: [ATM] PLOP Assumptions, Bob May
    • RE: [ATM] PLOP Assumptions, Peter
      • RE: [ATM] PLOP Assumptions, Ken Hunter
• [ATM] PLOP on point & spot supports and P-V & RMS error, Donald Good
• [ATM] PLOP some mirror cell observations, vorblesnak
  • [ATM] Interesting little fractures on pyrex blanks, Guy Brandenburg
    • Re: [ATM] Interesting little fractures on pyrex blanks, Richard F.L.R. Snashall
  • Re: [ATM] PLOP some mirror cell observations, Jeff Anderson-Lee
    • Re: [ATM] PLOP some mirror cell observations, vorblesnak
      • Re: [ATM] PLOP some mirror cell observations, Vladimir Galogaza
    • Re: [ATM] PLOP some mirror cell observations, Vladimir Galogaza
    • Re: [ATM] PLOP some mirror cell observations, Vladimir Galogaza
• [ATM] PLOP's usefullness., artbianconi
  • Re: [ATM] PLOP's usefullness., Richard Ozer
  • Re: [ATM] PLOP's usefullness., Bob May
  • <Possible follow-up(s)>
  • Re: [ATM] PLOP's usefullness., matt
    • Re: [ATM] PLOP's usefullness., Dale Eason
      • Re: [ATM] PLOP's usefullness., Jeff Anderson-Lee
    • RE: [ATM] PLOP's usefullness., Richard Klappal
      • Re: [ATM] PLOP's usefullness., matt
      • RE: [ATM] PLOP's usefullness., Richard Klappal
      • Re: [ATM] PLOP's usefullness., Jeff Anderson-Lee
      • Re: [ATM] PLOP's usefullness., Ken Lowther
      • RE: [ATM] PLOP's usefullness., Jerry Reddell
      • RE: [ATM] PLOP's usefullness., Ken Lowther
      • Re: [ATM] PLOP's usefullness., Jan van gastel
• Re: [ATM] PLOP, new developments in mirror support, starte of, theart edge support, etc, Mark Holm
  • <Possible follow-up(s)>
  • Re: [ATM] PLOP, new developments in mirror support, starte of, theart edge support, etc, Mark Holm
    • Re: [ATM] PLOP, new developments in mirror support, starte of,the art edge support, etc, Ken Hunter
• Re: [ATM] PLOP, new developments in mirror support, starte of, Arjan te Marvelde
  • RE: [ATM] PLOP, new developments in mirror support, starte of, Jerry Reddell
• Re: [ATM] PLOP, new developments in mirror support, starte of the,art edge support, etc, Mark Holm
• [ATM] PLOP, new developments in mirror support,starte of the art edge support, etc, Jay Kirkland
  • Re: [ATM] PLOP, new developments in mirror support,starte of the art edge support, etc, Ken Hunter
    • Re: [ATM] PLOP, new developments in mirror support, starte of theart edge support, etc, Ken Lowther
      • Re: [ATM] PLOP, new developments in mirror support,starte of the art edge support, etc, Ken Hunter
      • Re: [ATM] PLOP, new developments in mirror support,starte of the art edge support, etc, Bob May
      • Re: [ATM] PLOP, new developments in mirror support,starte of theart edge support, etc, Bob May
    • RE: [ATM] PLOP, new developments in mirror support,starte of the art edge support, etc, Jerry Reddell
  • RE: [ATM] PLOP, new developments in mirror support,starte of the art edge support, etc, Richard Klappal
  • Re: [ATM] PLOP, new developments in mirror support,starte of the art edge support, etc, Mel Bartels
  • Re: [ATM] PLOP, new developments in mirror support, starte ofthe art edge support, etc, Jim Burrows
  • Re: [ATM] PLOP, new developments in mirror support, starte of theart edge support, etc, Woodchuck
    • Re: [ATM] PLOP, new developments in mirror support,starte of theart edge support, etc, Vladimir Galogaza
      • Re: [ATM] PLOP, new developments in mirror support,starte of theart edge support, etc, Bob May
• [ATM] PLOP, new developments in mirror support,state of the art edge support, etc, Jay Kirkland
  • Re: [ATM] PLOP, new developments in mirror support,state of the art edge support, etc, Dale Eason
    • Re: [ATM] PLOP, new developments in mirror support,state of the art edge support, etc, Vladimir Galogaza
    • Re: [ATM] PLOP, new developments in mirror support,state of the art edge support, etc, Mel Bartels
• [ATM] POLISHING SCRATCHED LENS, Lee Chin Huat
  • Re: [ATM] POLISHING SCRATCHED LENS, Bob May
• [ATM] Powder Coating Project, James Lerch
• [ATM] Pyramid shaped, 3 tube open truss, artbianconi
  • Re: [ATM] Pyramid shaped, 3 tube open truss, Mel Bartels
    • Re: [ATM] Pyramid shaped, 3 tube open truss, Vladimir Galogaza
  • <Possible follow-up(s)>
  • Re: [ATM] Pyramid shaped, 3 tube open truss, Mark Holm
    • Re: [ATM] Pyramid shaped, 3 tube open truss, Daniel Fundo
  • Re: [ATM] Pyramid shaped, 3 tube open truss, Leftfieldstar
• [ATM] Re ;Mirror Cells, Ulhas Deshpande
  • Re: [ATM] Re ;Mirror Cells, Jerry B. Hillman
    • RE: [ATM] Mirror Cells, Jerry Reddell
• [ATM] re mirror support, Ellen Mackenzie
  • Re: [ATM] re mirror support, Michael Lindner
• [ATM] re Oslo, Ellen Mackenzie
• [ATM] RE: Collapsing truss poles """STOP""", Mike Spacedude40
• [ATM] Re: 40" mirror, Jerry B. Hillman
  • <Possible follow-up(s)>
  • [ATM] Re: 40" mirror, vladimir sacek
• [ATM] re: 40" mirror Ideas, Ellen Mackenzie
  • Re: [ATM] re: 40" mirror Ideas, Jean-Guy Moreau
• [ATM] Re: All about hydrostone tools, mdholm
• [ATM] Re: ATM Digest, Vol 12, Issue 13 Edge Support, Lee Buse
  • <Possible follow-up(s)>
  • Re: [ATM] Re: ATM Digest, Vol 12, Issue 13 Edge Support, DHA352
• [ATM] RE: ATM Digest, Vol 12, Issue 17, Julio Sanchez
  • Re: [ATM] RE: ATM Digest, Vol 12, Issue 17, Bill Kelley
• [ATM] Re: ATM Digest, Vol 12, Issue 2, artbianconi
• [ATM] Re: ATM Digest, Vol 12, Issue 24, artbianconi
  • [ATM] Re: ATM Digest, Vol 12, Issue 24, Ken Hunter
    • [ATM] Re: ATM Digest, Vol 12, Issue 24, artbianconi
• [ATM] Re: ATM Digest, Vol 12, Issue 25, artbianconi
  • <Possible follow-up(s)>
  • [ATM] Re: ATM Digest, Vol 12, Issue 25, matt
• [ATM] RE: ATM for newbies, Mold
  • RE: [ATM] RE: ATM for newbies, Ellen Mackenzie
  • Re: [ATM] RE: ATM for newbies, Jerry B. Hillman
    • Re: [ATM] RE: ATM for newbies, Jeff Anderson-Lee
    • Re: [ATM] RE: ATM for newbies, David O. Trevino
  • Re: [ATM] RE: ATM for newbies, Ken Hunter
  • <Possible follow-up(s)>
  • RE: [ATM] RE: ATM for newbies, Mark Holm
  • [ATM] RE: ATM for newbies, mlbrown@everstrive.com
• [ATM] Re: ATM zones, Bob Walker
  • Re: [ATM] Re: ATM zones, Mel Bartels
    • Re: [ATM] Re: ATM zones, Mike Lockwood
  • Re: [ATM] Re: ATM zones, Dale Eason
    • Re: [ATM] Re: ATM zones, Guy Brandenburg
      • Re: [ATM] Re: ATM zones, Dale Eason
• [ATM] RE: Best webcam/ccd for Foucaultgrams?, Julio Sanchez
  • Re: [ATM] RE: Best webcam/ccd for Foucaultgrams?, Bob May
  • <Possible follow-up(s)>
  • [ATM] RE: Best webcam/ccd for Foucaultgrams?, mdholm
• [ATM] Re: Casting Pyrex Mirror Blanks, Thurmond Moore III
  • Re: [ATM] Re: Casting Pyrex Mirror Blanks, Ken Lowther
  • Re: [ATM] Re: Casting Pyrex Mirror Blanks, Don D'Egidio
  • <Possible follow-up(s)>
  • [ATM] Re: Casting Pyrex Mirror Blanks, Mark Holm
• [ATM] Re: Eyepiece changes and balance problems, jeffmorgan
  • Re: [ATM] Re: Eyepiece changes and balance problems, Jim Miller
    • RE: [ATM] Eyepiece changes and balance problems, Jerry Reddell
  • Re: [ATM] Re: Eyepiece changes and balance problems, Ken Hunter
  • Re: [ATM] Re: Eyepiece changes and balance problems, George Anderson
  • RE: [ATM] Re: Eyepiece changes and balance problems, Donald Good
  • <Possible follow-up(s)>
  • Re: [ATM] Re: Eyepiece changes and balance problems, DHA352
  • Re: Re: [ATM] Re: Eyepiece changes and balance problems, Pierre DESVAUX
  • Re: Re: [ATM] Re: Eyepiece changes and balance problems, Pierre DESVAUX
  • Re: [ATM] Re: Eyepiece changes and balance problems, jeffmorgan
    • Re: [ATM] Re: Eyepiece changes and balance problems, Ken Hunter
      • Re: [ATM] Re: Eyepiece changes and balance problems, Jim Miller
      • Re: [ATM] Re: Eyepiece changes and balance problems, Ken Hunter
• [ATM] Re: Eyepiece in question, vladimir sacek
• [ATM] Re: Fused Silica Mirror Blank was casting pyrex mirror blanks., Thurmond Moore III
  • Re: [ATM] Re: Fused Silica Mirror Blank was casting pyrex mirrorblanks., Vladimir Galogaza
  • RE: [ATM] Re: Fused Silica Mirror Blank was casting pyrex mirrorblanks., Thomas
• [ATM] Re: Holographic Foucault null test, IAPDK
  • Re: [ATM] Re: Holographic Foucault null test, Mauritz Andersson
• [ATM] Re: How small a Ritchey-Chretien, vladimir sacek
• [ATM] RE: How small a Ritchie Chretien, Julio Sanchez
  • Re: [ATM] RE: How small a Ritchie Chretien, Jim Burrows
  • <Possible follow-up(s)>
  • [ATM] RE: How small a Ritchie Chretien, Julio Sanchez
    • Re: [ATM] RE: How small a Ritchie Chretien, Jim Burrows
    • Re: [ATM] RE: How small a Ritchie Chretien, Richard F.L.R. Snashall
      • Re: [ATM] RE: How small a Ritchie Chretien, Jim Burrows
  • [ATM] RE: How small a Ritchie Chretien, Julio Sanchez
• [ATM] Re: How small a Ritchie-Chretien, vladimir sacek
  • <Possible follow-up(s)>
  • [ATM] Re: How small a Ritchie-Chretien, vladimir sacek
• [ATM] RE: How small a Ritichie-Chretien, Julio Sanchez
  • Re: [ATM] RE: How small a Ritichie-Chretien, Michael Peck
  • Re: [ATM] RE: How small a Ritichie-Chretien, Ken Hunter
    • Re: [ATM] RE: How small a Ritichie-Chretien, Andy Saulietis
  • Re: [ATM] RE: How small a Ritichie-Chretien, Jim Burrows
    • Re: [ATM] RE: How small a Ritichie-Chretien, Ric Rokosz
  • <Possible follow-up(s)>
  • RE: [ATM] RE: How small a Ritichie-Chretien, Julio Sanchez
• [ATM] re: making glass, Ellen Mackenzie
• Re: [ATM] Re: Mirror cell, 40" thoughts, Jarvis Krumbein
• Re: [ATM] Re: PLOP Assumptions, matt
• [ATM] Re: PLOP designed cell and machining accuracy, Ulhas Deshpande
  • Re: [ATM] Re: PLOP designed cell and machining accuracy, Jan van Gastel
  • Re: [ATM] Re: PLOP designed cell and machining accuracy, Jan van Gastel
  • <Possible follow-up(s)>
  • [ATM] Re: PLOP designed cell and machining accuracy, Mark Holm
• [ATM] Re: PLOP on point & spot supports and P-V & RMS error, mdholm
• [ATM] RE: Ray tracer for cheap?, Julio Sanchez
  • <Possible follow-up(s)>
  • [ATM] Re: Ray tracer for cheap?, vladimir sacek
    • Re: [ATM] Re: Ray tracer for cheap?, Guy Brandenburg
• [ATM] RE: slits and testers, Julio Sanchez
• [ATM] RE: Solar tracking, lou krajci
• [ATM] Re: Star testing a Cassegrain system and determiningsecondary correction, vladimir sacek
• [ATM] Re: Star testing with a ronchi test to quantify a TDE, Raphaël GUINAMARD
  • Re: [ATM] Re: Star testing with a ronchi test to quantify a TDE, Ken Lowther
    • Re: [ATM] Re: Star testing with a ronchi test to quantify a TDE, Guy Brandenburg
      • Re: [ATM] Re: Star testing with a ronchi test to quantify a TDE, Ken Lowther
      • Re: [ATM] Re: Star testing with a ronchi test to quantify a TDE, Raphaël GUINAMARD
  • Re: [ATM] Re: Star testing with a ronchi test to quantify a TDE, Mike Spooner
    • Re: [ATM] Re: Star testing with a ronchi test to quantify a TDE, Raphaël GUINAMARD
• [ATM] Re: Two Stage Truss, lou krajci
  • <Possible follow-up(s)>
  • [ATM] Re: Two Stage Truss, martin.cibulski
  • [ATM] Re: Two Stage Truss, Tomandbeth
• [ATM] RE: What adhesive for tiles on a plaster tool?, Julio Sanchez
  • Re: [ATM] RE: What adhesive for tiles on a plaster tool?, Richard Ozer
  • [ATM] Metal tools vs. hydrostone, hydrostone mixing note, Mike Lockwood
  • Re: [ATM] RE: What adhesive for tiles on a plaster tool?, Bob May
• [ATM] Re: What filters.../solar observing, vladimir sacek
• [ATM] Re:ATM focal reducer, The Alarm Co.
• [ATM] Ronchi test photos - Is edge turrned up, down, or OK?, J Killea
  • Re: [ATM] Ronchi test photos - Is edge turrned up, down, or OK?, Mel Bartels
  • Re: [ATM] Ronchi test photos - Is edge turrned up, down, or OK?, Ken Hunter
    • Re: [ATM] Ronchi test photos - Is edge turrned up, down, or OK?, Ken Hunter
• [ATM] Secondary Color, Richard F.L.R. Snashall
• [ATM] Seeking Advice Interpreting Ronchi tests, J Killea
• [ATM] server test, Ken Lowther
  • Re: [ATM] server test, Ken Lowther
• [ATM] Set of specs., David Williams
  • Re: [ATM] Set of specs., Guy Brandenburg
    • Re: [ATM] Set of specs., Bob May
  • Re: [ATM] Set of specs., Jerry B. Hillman
  • Re: [ATM] Set of specs., Bob May
• [ATM] Size does matter, Arjan te Marvelde
  • Re: [ATM] Size does matter, Anthony Stillman
  • <Possible follow-up(s)>
  • Re: [ATM] Size does matter, jeffmorgan
  • Re: [ATM] Size does matter, Arjan te Marvelde
  • Fw: [ATM] Size does matter, Arjan te Marvelde
  • Re: [ATM] Size does matter, jeffmorgan
• Re: [ATM] Solar tracking, Anthony Stillman
  • Re: [ATM] Solar tracking, George Anderson
    • Re: [ATM] Solar tracking, Mac Oglesby
  • <Possible follow-up(s)>
  • Re: [ATM] Solar tracking, Mark Holm
    • Re: [ATM] Solar tracking, Ken Hunter
      • Re: [ATM] Solar tracking, Vladimir Galogaza
      • Re: [ATM] Solar tracking, Mac Oglesby
  • Re: [ATM] Solar tracking, matt
• [ATM] Some Yule thoughts, Ina Ron Lippard Renaissance Reproductions
• Re: [ATM] Sorry about the double post, Bob May
• [ATM] Square over Round Truss Tube, Lee Chin Huat
  • Re: [ATM] Square over Round Truss Tube, Wouter van Reeven
  • Re: [ATM] Square over Round Truss Tube, Ross Sackett
  • RE: [ATM] Square over Round Truss Tube, Jerry Reddell
    • RE: [ATM] Square over Round Truss Tube, Richard Klappal
      • RE: [ATM] Square over Round Truss Tube, Jerry Reddell
      • Re: [ATM] Square over Round Truss Tube, Jerry B. Hillman
      • Re: [ATM] Square over Round Truss Tube, Bob May
      • Message not available
      • Message not available
      • Message not available
      • Message not available
      • Message not available
      • [ATM] Re: Mirror cell, 40" thoughts, Jerry B. Hillman
      • Re: [ATM] Re: Mirror cell, 40" thoughts, Mel Bartels
      • [ATM] was Re: Mirror cell, 40" thoughts...bees, Dave Smith
      • Re: [ATM] Re: Mirror cell, 40" thoughts, Jeff Anderson-Lee
      • Re: [ATM] Re: Mirror cell, 40" thoughts, Jerry B. Hillman
      • Re: [ATM] Re: Mirror cell, 40" thoughts, Jeff Anderson-Lee
      • RE: [ATM] Square over Round Truss Tube, Richard Klappal
  • <Possible follow-up(s)>
  • Re: [ATM] Square over Round Truss Tube, Jarvis Krumbein
    • OT: Tubes (was Re: [ATM] Square over Round Truss Tube), Thomas A. Moulton
    • Re: [ATM] Square over Round Truss Tube, James P Crombie
  • Re: [ATM] Square over Round Truss Tube, lou krajci
  • Re: [ATM] Square over Round Truss Tube, Arjan te Marvelde
• [ATM] Star testing with a ronchi test to quantify a sphericalaberration, Raphaël GUINAMARD
• [ATM] Star testing with a ronchi test to quantify a TDE, Raphaël GUINAMARD
• [ATM] Star teting a Cassegrain system and Determining SecondaryCorrection, M/S Heald
• Re: [ATM] Star teting a Cassegrain system and DeterminingSecondary Correction, Jim Burrows
  • Re: [ATM] Star teting a Cassegrain system and Determining SecondaryCorrection, Richard F.L.R. Snashall
• Re: [ATM] Star teting a Cassegrain system and DeterminingSecondaryCorrection, Bob May
• Re: [ATM] Strange Chinese Telescope Design f/3.6, spherical mirror, Jarvis Krumbein
• [ATM] stroke question, David Williams
  • Re: [ATM] stroke question, Bill Kelley
  • Re: [ATM] stroke question, Woodchuck
    • Re: [ATM] stroke question, Ken Hunter
    • Re: [ATM] stroke question, Michael Lindner
  • Re: [ATM] stroke question, Rocky
  • <Possible follow-up(s)>
  • Re: [ATM] stroke question, DHA352
    • Re: [ATM] stroke question, Bill Kelley
• [ATM] Telescope Optics Workshop, Richard Schwartz
• [ATM] Test, nunya
• [ATM] The wieght of 1-5/8" Pyrex glass, Russell Jocoy
  • RE: [ATM] The wieght of 1-5/8" Pyrex glass, Thomas
    • RE: [ATM] The wieght of 1-5/8" Pyrex glass, Guy Brandenburg
      • Re: [ATM] The wieght of 1-5/8" Pyrex glass, Richard F.L.R. Snashall
      • Re: [ATM] The wieght of 1-5/8" Pyrex glass, Vladimir Galogaza
      • RE: [ATM] The wieght of 1-5/8" Pyrex glass, Thomas
    • RE: [ATM] The wieght of 1-5/8" Pyrex glass, Ken Lowther
  • Re: [ATM] The wieght of 1-5/8" Pyrex glass, Ken Hunter
• [ATM] Threading wood and breathing, Ina Ron Lippard Renaissance Reproductions
  • Re: [ATM] Threading wood and breathing, James P Crombie
  • Re: [ATM] Threading wood and breathing, Daniel Fundo
• [ATM] Three -D Reply...Ronchi Veiw... Learch will not stop.....800lbls of Pyrex...., Russell Jocoy
  • Re: [ATM] Three -D Reply...Ronchi Veiw... Learch will notstop.....800lbls of Pyrex...., Jerry B. Hillman
• [ATM] Tom Clark's "Modern Dobsonian" reprint, Edmund Stevens
  • Re: [ATM] Tom Clark's "Modern Dobsonian" reprint, Bob May
• Re: [ATM] Triplet too, Richard F.L.R. Snashall
• Re: [ATM] truss poles; was: How Big is Too Big?, Daniel Fundo
  • Re: [ATM] truss poles; was: How Big is Too Big?, Bob May
• [ATM] Two Stage Truss, Jay Kirkland
  • <Possible follow-up(s)>
  • Re: [ATM] Two Stage Truss, Arjan te Marvelde
  • Re: [ATM] Two Stage Truss, lou krajci
  • Re: [ATM] Two Stage Truss, Gilbert Gagne
• RE: [ATM] Two Stage Truss + ALU-upperring, Treur, Harro
• [ATM] Vol. 12 issue 18 Melting glass, derekpaton
  • Re: [ATM] Vol. 12 issue 18 Melting glass, Jerry B. Hillman
• Re: [ATM] Waineo/Jones null test question, Ken Lowther
  • Re: [ATM] Waineo/Jones null test question, Edmund Stevens
    • Re: [ATM] Waineo/Jones null test question, Hiroyuki HIKITA
• Re: [ATM] What adhesive for tiles on a plaster tool, mdholm
• [ATM] What adhesive for tiles on a plaster tool?, N1XLP
  • Re: [ATM] What adhesive for tiles on a plaster tool?, rozer
  • Re: [ATM] What adhesive for tiles on a plaster tool?, Ken Lowther
  • Re: [ATM] What adhesive for tiles on a plaster tool?, Bob May
    • Re: [ATM] What adhesive for tiles on a plaster tool?, rozer
      • Re: [ATM] What adhesive for tiles on a plaster tool?, Bob May
  • Re: [ATM] What adhesive for tiles on a plaster tool?, Jerry B. Hillman
    • Re: [ATM] What adhesive for tiles on a plaster tool?, Richard Ozer
      • [ATM] All about hydrostone tools, Mike Lockwood
      • Re: [ATM] All about hydrostone tools, Richard Ozer
      • Re: [ATM] All about hydrostone tools, Mike Lockwood
      • Re: [ATM] All about hydrostone tools, Richard Ozer
      • Re: [ATM] All about hydrostone tools, Lawrence Sayre
      • Re: [ATM] All about hydrostone tools, Bob May
      • Re: [ATM] All about hydrostone tools, Vladimir Galogaza
• [ATM] What filters are best/language, Jay Kirkland
  • Re: [ATM] What filters are best/language, Ken Lowther
    • qRe: [ATM] What filters are best/language, Bob May
• [ATM] What filters best for a, artbianconi
  • Re: [ATM] What filters best for a, Ken Hunter
    • Re: [ATM] What filters best for a, Guy Brandenburg
      • [ATM] Silters a 14 x 40 Maksutov-Gregorian telescope, artbianconi
  • Re: [ATM] What filters best for a, George Anderson
  • Re: [ATM] What filters best for a, A. Suijkerbuijk
  • <Possible follow-up(s)>
  • Re: [ATM] What filters best for a, Jarvis Krumbein
  • Re: [ATM] What filters best for a, Jarvis Krumbein
    • Re: [ATM] What filters best for a, artbianconi
    • RE: [ATM] What filters best for a, Richard Klappal
      • [ATM] What filters best for a, artbianconi
      • RE: [ATM] What filters best for a, Richard Klappal
      • RE: [ATM] What filters best for a, Guy Brandenburg
      • Re: [ATM] What filters best for a, Bob May
    • Re: [ATM] What filters best for a, Chuck Taylor
  • Re: [ATM] What filters best for a, Jarvis Krumbein
    • Re: [ATM] What filters best for a, Bob May
      • Re: [ATM] What filters best for a, Guy Brandenburg
      • Re: [ATM] What filters best for a, Dominic-Luc Webb
  • Re: [ATM] What filters best for a, Jarvis Krumbein
• [ATM] What filters.../solar observing, Jay Kirkland
• Re: [ATM] What type of edge support is "state of the art" for a mirror, Hugues.Laroche
  • Re: [ATM] What type of edge support is "state of the art" for a mirror, Nils Olof Carlin
  • Re: [ATM] What type of edge support is "state of the art" for a mirror, Nils Olof Carlin
  • Re: [ATM] What type of edge support is "state of the art" for a mirror, Jeff Anderson-Lee
    • Re: [ATM] What type of edge support is "state of the art" for a mirror, luth-astro
      • Re: [ATM] What type of edge support is "state of the art" for a mirror, Jeff Anderson-Lee
• [ATM] What type of edge support is "state of the art" for a mirror ?, pierre.j.desvaux
• Re: Re: [ATM] What type of edge support is "state of the art" for amirror, Pierre DESVAUX
  • Re: Re: [ATM] What type of edge support is "state of the art" for amirror, Nils Olof Carlin
• Re: [ATM] What type of edge support is "state of the art" for, amirror, Mark Holm
  • <Possible follow-up(s)>
  • Re: [ATM] What type of edge support is "state of the art" for, amirror, Mark Holm
• [ATM] why the eyepiece looks foggy at the corners, David Williams
  • Re: [ATM] why the eyepiece looks foggy at the corners, Bob May
• [ATM] zones, David Williams
  • <Possible follow-up(s)>
  • Fwd: [ATM] zones, Matthew L. Brown
  • Re: [ATM] zones, Mark Holm
    • Re: [ATM] zones, Mark Holm
  • [ATM] zones, David Williams
    • Re: [ATM] zones, Jerry B. Hillman
      • Re: [ATM] zones, Guy Brandenburg
    • Re: [ATM] zones, Bob May
      • [ATM] 16.5" mirror, Jerry B. Hillman
      • Re: [ATM] 16.5" mirror, Jim Burrows
      • RE: [ATM] 16.5" mirror, Jerry
      • Re: [ATM] 16.5" mirror, Jerry B. Hillman
    • Re: [ATM] zones, Jim Burrows
      • [ATM] Re: [ATM) David Williams, Bill Kelley
      • [ATM] Re: [ATM) David Williams, John Murray
      • Re: [ATM] Re: [ATM) David Williams, Ken Lowther
  • Re: [ATM] zones, Mark Holm
    • Re: [ATM] zones, Jerry B. Hillman
    • Re: [ATM] zones, Guy Brandenburg
  • Re: [ATM] Zones, Mark Holm
• [ATM] zones 1, David Williams
  • Re: [ATM] zones 1, Bob May
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA, Mail System Internal Data
• Optical Design Software [was: Re: [ATM] Aplanatic Gregorian (was:25" mirror possibilities)], Jeff Anderson-Lee
• Subject:Re: Re: [ATM] Re: ATM Digest, Vol 12, Issue 13 Edge Support, Lee Buse