Amateur Telescope Makers (ATM) Archive for DEC04 - by author

• Thread Index

• [ATM] Star testing with a ronchi test to quantify a TDE
  • From: Raphaël GUINAMARD <rguinamard@infonie.fr>
• [ATM] Star testing with a ronchi test to quantify a sphericalaberration
  • From: Raphaël GUINAMARD <rguinamard@infonie.fr>
• [ATM] Re: Star testing with a ronchi test to quantify a TDE
  • From: Raphaël GUINAMARD <rguinamard@infonie.fr>
• Re: [ATM] Re: Star testing with a ronchi test to quantify a TDE
  • From: Raphaël GUINAMARD <rguinamard@infonie.fr>
• Re: [ATM] Re: Star testing with a ronchi test to quantify a TDE
  • From: Raphaël GUINAMARD <rguinamard@infonie.fr>
• Re: [ATM] What filters best for a
  • From: "A. Suijkerbuijk" <a.suykerbuyk@wxs.nl>
• [ATM] 16" mirror
  • From: "Alan K. Henderson" <alankh@ev1.net>
• [ATM] balancing a serrurier truss
  • From: "Andreas Derwahl" <andreas@duda-derwahl.de>
• Re: [ATM] balancing a serrurier truss
  • From: "Andreas Derwahl" <andreas@duda-derwahl.de>
• Re: [ATM] RE: How small a Ritichie-Chretien
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: [ATM] Solar tracking
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Size does matter
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] 40" mirror some ideas
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] 40" mirror some ideas
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Interpreting DK secondary interference test
  • From: Aplanatic@aol.com
• Re: [ATM] .707*Radius
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Two Stage Truss
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Square over Round Truss Tube
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re:[ATM] Holographic Foucault null test
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Density of Baltic Birch
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• [ATM] Size does matter
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Size does matter
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Fw: [ATM] Size does matter
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] PLOP, new developments in mirror support, starte of
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• [ATM] 770 primer with Loctite Prism 401
  • From: artbianconi@blast.net
• [ATM] Re: ATM Digest, Vol 12, Issue 2
  • From: artbianconi@blast.net
• [ATM] Pyramid shaped, 3 tube open truss
  • From: artbianconi@blast.net
• [ATM] What filters best for a
  • From: artbianconi@blast.net
• [ATM] Silters a 14 x 40 Maksutov-Gregorian telescope
  • From: artbianconi@blast.net
• [ATM] PLOP Assumptions
  • From: artbianconi@blast.net
• [ATM] balancing a light scope
  • From: artbianconi@blast.net
• [ATM] PLOP Assumptions
  • From: artbianconi@blast.net
• Re: [ATM] What filters best for a
  • From: artbianconi@blast.net
• [ATM] What filters best for a
  • From: artbianconi@blast.net
• [ATM] PLOP's usefullness.
  • From: artbianconi@blast.net
• [ATM] Re: ATM Digest, Vol 12, Issue 24
  • From: artbianconi@blast.net
• [ATM] Re: ATM Digest, Vol 12, Issue 25
  • From: artbianconi@blast.net
• [ATM] Re: ATM Digest, Vol 12, Issue 24
  • From: artbianconi@blast.net
• [ATM] Re: [ATM) David Williams
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] ATM Dave Williams and his 3/4" x 20" attempt at aTelescopeMirror
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] stroke question
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] stroke question
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] RE: ATM Digest, Vol 12, Issue 17
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] truss poles; was: How Big is Too Big?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Sorry about the double post
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Interesting Doublet
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Interesting Doublet
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Collapsing truss poles
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Mak corrector plates etc.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Collapsing truss poles
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Mak corrector plates etc.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] first tool
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Holographic Foucault null test
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] why the eyepiece looks foggy at the corners
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Eyepiece in question
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Star teting a Cassegrain system and DeterminingSecondaryCorrection
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Set of specs.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] POLISHING SCRATCHED LENS
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Square over Round Truss Tube
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Set of specs.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] zones 1
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] zones
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Interpreting DK secondary interference test
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Need some guidance interpreting focualt results
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Interpreting DK secondary interference test
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] A Touching Problem
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] PLOP Assumptions
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] What filters best for a
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] What filters best for a
  • From: "Bob May" <bobmay@nethere.com>
• qRe: [ATM] What filters are best/language
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Tom Clark's "Modern Dobsonian" reprint
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Re: PLOP Assumptions
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] PLOP's usefullness.
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] PLOP, new developments in mirror support,starte of theart edge support, etc
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] PLOP, new developments in mirror support,starte of the art edge support, etc
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] PLOP, new developments in mirror support,starte of theart edge support, etc
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] PLOP Assumptions
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] PLOP Assumptions
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Strange Chinese Telescope Design f/3.6, spherical mirror
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] What adhesive for tiles on a plaster tool?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] RE: Best webcam/ccd for Foucaultgrams?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] All about hydrostone tools
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] What adhesive for tiles on a plaster tool?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] RE: What adhesive for tiles on a plaster tool?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] dew heater ..Resistive Paint
  • From: "Bob May" <bobmay@nethere.com>
• [ATM] Re: ATM zones
  • From: "Bob Walker" <tac@i1.net>
• Re: [ATM] What filters best for a
  • From: Chuck Taylor <chucktaylor@speakeasy.net>
• [ATM] Figuring Help On a 6" F7
  • From: COO <coo_mo@yahoo.com>
• [ATM] 24" f/4 lightweight Dob
  • From: "Cord Scholz" <cord@astro-image.com>
• RE: [ATM] 24" f/4 lightweight Dob
  • From: "Cord Scholz" <cord@astro-image.com>
• RE: [ATM] 24" f/4 lightweight Dob
  • From: "Cord Scholz" <cord@astro-image.com>
• Re: [ATM] Re: ATM zones
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Re: ATM zones
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] PLOP Assumptions
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Next advances is cell design..
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] PLOP, new developments in mirror support,state of the art edge support, etc
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] PLOP's usefullness.
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] 40" mirror
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Best webcam/ccd for Foucaultgrams?
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] truss poles; was: How Big is Too Big?
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Threading wood and breathing
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Pyramid shaped, 3 tube open truss
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] ANY LENS IN DIGITAL PHOTOCOPY MACHINE ?
  • From: Dave Smith <smithersscope@yahoo.com>
• [ATM] dew heater circuit questions
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] dew heater circuit questions
  • From: Dave Smith <smithersscope@yahoo.com>
• [ATM] was Re: Mirror cell, 40" thoughts...bees
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] dew heater circuit questions-MORE Q's
  • From: Dave Smith <smithersscope@yahoo.com>
• [ATM] zones
  • From: "David Williams" <dwilliams1128@earthlink.net>
• [ATM] why the eyepiece looks foggy at the corners
  • From: "David Williams" <dwilliams1128@earthlink.net>
• [ATM] Foucault diagram
  • From: "David Williams" <dwilliams1128@earthlink.net>
• [ATM] focal reducer
  • From: "David Williams" <dwilliams1128@earthlink.net>
• [ATM] Set of specs.
  • From: "David Williams" <dwilliams1128@earthlink.net>
• [ATM] zones
  • From: "David Williams" <dwilliams1128@earthlink.net>
• [ATM] zones 1
  • From: "David Williams" <dwilliams1128@earthlink.net>
• Re: [ATM] RE: ATM for newbies
  • From: "David O. Trevino" <david.trevino@byu.edu>
• Re: [ATM] Magnitude Limit in Telescope
  • From: "David O. Trevino" <david.trevino@byu.edu>
• [ATM] my resolved 20"
  • From: "David Williams" <dwilliams1128@earthlink.net>
• [ATM] finding Bill
  • From: "David Williams" <dwilliams1128@earthlink.net>
• [ATM] stroke question
  • From: "David Williams" <dwilliams1128@earthlink.net>
• [ATM] Vol. 12 issue 18 Melting glass
  • From: "derekpaton" <derekpaton@tiscali.co.uk>
• Re: [ATM] glue
  • From: DHA352@aol.com
• Re: [ATM] Re: ATM Digest, Vol 12, Issue 13 Edge Support
  • From: DHA352@aol.com
• Re: [ATM] Re: Eyepiece changes and balance problems
  • From: DHA352@aol.com
• Re: [ATM] Eyepiece changes and balance problems
  • From: DHA352@aol.com
• Re: [ATM] stroke question
  • From: DHA352@aol.com
• [ATM] (no subject)
  • From: DHA352@aol.com
• Re: [ATM] 40" mirror
  • From: DHA352@aol.com
• Re:[ATM] Holographic Foucault null test
  • From: dmikk2@netscape.net
• Re: [ATM] glue
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Mak corrector plates etc.
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] What filters best for a
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Best webcam/ccd for Foucaultgrams?
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• [ATM] Re: 770 primer with Loctite Prism 401
  • From: "Don Clement" <clement.focuser@verizon.net>
• [ATM] Cutting large holes in aluminum
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Cutting large holes in aluminum
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Graphite question, and yes this is on topic!
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] dew heater circuit questions
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] dew heater circuit questions
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] dew heater circuit questions
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] dew heater circuit questions
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Cutting large holes in aluminum
  • From: "Don D'Egidio" <djd521@comcast.net>
• Re: [ATM] Re: Casting Pyrex Mirror Blanks
  • From: "Don D'Egidio" <djd521@comcast.net>
• Re: [ATM] Strange Chinese Telescope Design f/3.6, spherical mirror
  • From: "Don Ware" <mimas@charter.net>
• RE: [ATM] .707*Radius (long)
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] .707*Radius (long)
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] making glass
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] making glass versus melting glass
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] Re: Eyepiece changes and balance problems
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] 40" mirror
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] Eyepiece changes and balance problems
  • From: "Donald Good" <donald.good@comcast.net>
• [ATM] PLOP on point & spot supports and P-V & RMS error
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] 40" mirror some ideas
  • From: "Donald Good" <donald.good@comcast.net>
• RE: [ATM] 40" mirror some ideas
  • From: "Donald Good" <donald.good@comcast.net>
• [ATM] ATM: Fifth Annual Mid-Atlantic Mirror Making Seminar
  • From: "Dr. Wm. D. Hanagan, Jr." <hanaganw@attglobal.net>
• Re: [ATM] Waineo/Jones null test question
  • From: Edmund Stevens <ehs@hevanet.com>
• [ATM] Tom Clark's "Modern Dobsonian" reprint
  • From: Edmund Stevens <ehs@hevanet.com>
• [ATM] Oslo short
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• [ATM] FW: Oslo short
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• [ATM] re Oslo
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• RE: [ATM] RE: ATM for newbies
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• [ATM] re: making glass
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• [ATM] re mirror support
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• [ATM] FW: re mirror support
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• RE: [ATM] 40" mirror some ideas
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• [ATM] re: 40" mirror Ideas
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• [ATM] FW: re: 40" mirror Ideas
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• RE: [ATM] hilux mirror coatings
  • From: Frans Franssen <f.franssen@planet.nl>
• [ATM] OT: Question for David Williams
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] glue
  • From: George Anderson <georgea@cam.org>
• Re: [ATM] Solar tracking
  • From: George Anderson <georgea@cam.org>
• Re: [ATM] Re: Eyepiece changes and balance problems
  • From: George Anderson <georgea@cam.org>
• Re: [ATM] What filters best for a
  • From: George Anderson <georgea@cam.org>
• Re: [ATM] Strange Chinese Telescope Design f/3.6, spherical mirror
  • From: George Anderson <georgea@cam.org>
• [ATM] Cutting Multiple Tubes, Same Length
  • From: Gilbert Gagne <gil5941@earthlink.net>
• Re: [ATM] Two Stage Truss
  • From: Gilbert Gagne <gil5941@earthlink.net>
• Re: [ATM] Density of Baltic Birch
  • From: Gilbert Gagne <gil5941@earthlink.net>
• [ATM] 20" Mirror
  • From: Gilbert Gagne <gil5941@earthlink.net>
• [ATM] Best webcam/ccd for Foucaultgrams?
  • From: Gilbert Gagne <gil5941@earthlink.net>
• [ATM] Odd thoughts and observations and learning from errors
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Odd thoughts and observations and learning from errors
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Holographic Foucault null test
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Holographic Foucault null test
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Set of specs.
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Re: Ray tracer for cheap?
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] zones
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Re: ATM zones
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] zones
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] What filters best for a
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] A Touching Problem
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• RE: [ATM] What filters best for a
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] What filters best for a
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] Interesting little fractures on pyrex blanks
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] Strange Chinese Telescope Design f/3.6, spherical mirror
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Strange Chinese Telescope Design f/3.6, spherical mirror
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• RE: [ATM] The wieght of 1-5/8" Pyrex glass
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Re: Star testing with a ronchi test to quantify a TDE
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] ETX 70
  • From: HalbertMusik@aol.com
• Re: [ATM] Waineo/Jones null test question
  • From: Hiroyuki HIKITA <hikita@tkb.att.ne.jp>
• Re: [ATM] Collapsing truss poles
  • From: Hugues.Laroche@ses-astra.com
• Re: [ATM] What type of edge support is "state of the art" for a mirror
  • From: Hugues.Laroche@ses-astra.com
• [ATM] Re: Holographic Foucault null test
  • From: IAPDK@ADMIN.DRAKE.EDU
• [ATM] next breath and looking through it
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] Threading wood and breathing
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] cutting tube in the first generation
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] Some Yule thoughts
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] accuracy in the home shop
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• [ATM] Seeking Advice Interpreting Ronchi tests
  • From: J Killea <jkillea@yahoo.com>
• [ATM] Ronchi test photos - Is edge turrned up, down, or OK?
  • From: J Killea <jkillea@yahoo.com>
• Re: [ATM] Odd thoughts and observations and learning from errors
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• [ATM] Powder Coating Project
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: [ATM] Threading wood and breathing
  • From: James P Crombie <jpcrombie@pei.eastlink.ca>
• Re: [ATM] Square over Round Truss Tube
  • From: James P Crombie <jpcrombie@pei.eastlink.ca>
• [ATM] first tool
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] PLOP's usefullness.
  • From: "Jan van gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Re: PLOP designed cell and machining accuracy
  • From: Jan van Gastel <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Re: PLOP designed cell and machining accuracy
  • From: Jan van Gastel <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Square over Round Truss Tube
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Cutting Multiple Tubes, Same Length
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] What filters best for a
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] making glass versus melting glass
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] What filters best for a
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] What filters best for a
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] What filters best for a
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Strange Chinese Telescope Design f/3.6, spherical mirror
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Re: Mirror cell, 40" thoughts
  • From: Jarvis Krumbein <jkoptic@juno.com>
• [ATM] Collapsing truss poles
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] Two Stage Truss
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] Density of Baltic Birch
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] balancing a serrurier truss
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] balancing a seurrier truss
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] What filters.../solar observing
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] What filters are best/language
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] PLOP, new developments in mirror support,starte of the art edge support, etc
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] PLOP, new developments in mirror support,state of the art edge support, etc
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] 40" mirror
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] 40" mirror
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• [ATM] 40" mirror some ideas
  • From: Jay Kirkland <jaykirk2@compusmart.ab.ca>
• Re: [ATM] Beer bottles & producing a glass blank for a telescope
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• Re: [ATM] 40" mirror some ideas
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• Re: [ATM] 40" mirror some ideas
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• Re: [ATM] 40" mirror some ideas
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• Re: [ATM] 40" mirror some ideas
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• Re: [ATM] 40" mirror some ideas
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• Re: [ATM] 40" mirror some ideas
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• Re: [ATM] re: 40" mirror Ideas
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• Re: [ATM] 40" mirror some ideas
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• Re: [ATM] .707*Radius
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] Materials other than Pyrex
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] .707*Radius
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] Cell for David
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] Cell for David
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] Cell for David
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] Cell for David
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] RE: ATM for newbies
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] ATM Dave Williams and his 3/4" x 20" attempt at a TelescopeMirror
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] What type of edge support is "state of the art" for a mirror
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] What type of edge support is "state of the art" for a mirror
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] Next advances is cell design..
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] Next advances is cell design..
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] Next advances is cell design..
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] 3 point cell for 12 inch ?
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] PLOP's usefullness.
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] PLOP's usefullness.
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] I'm back, did you notice I was gone?
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Optical Design Software [was: Re: [ATM] Aplanatic Gregorian (was:25" mirror possibilities)]
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] 40" mirror
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] 40" mirror
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] PLOP some mirror cell observations
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] 40" mirror
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] 40" mirror
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] 40" mirror some ideas
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] 40" mirror some ideas
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] 40" mirror some ideas
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] 40" mirror some ideas
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] 40" mirror some ideas
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] 40" mirror some ideas
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] 40" mirror some ideas
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] Re: Mirror cell, 40" thoughts
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• Re: [ATM] Re: Mirror cell, 40" thoughts
  • From: Jeff Anderson-Lee <jonah@eecs.berkeley.edu>
• [ATM] Density of Baltic Birch
  • From: jeffmorgan@mindspring.com
• Re: [ATM] balancing a serrurier truss
  • From: jeffmorgan@mindspring.com
• [ATM] Re: Eyepiece changes and balance problems
  • From: jeffmorgan@mindspring.com
• Re: [ATM] Re: Eyepiece changes and balance problems
  • From: jeffmorgan@mindspring.com
• Re: [ATM] Size does matter
  • From: jeffmorgan@mindspring.com
• Re: [ATM] Size does matter
  • From: jeffmorgan@mindspring.com
• RE: [ATM] Huge lens on ebay
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] Holographic Foucault null test
  • From: "Jerry" <wa4guu@verizon.net>
• RE: [ATM] 16.5" mirror
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Square over Round Truss Tube
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] Set of specs.
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] ANY LENS IN DIGITAL PHOTOCOPY MACHINE ?
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] zones
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• [ATM] 16.5" mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] 16.5" mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] zones
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] RE: ATM for newbies
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• [ATM] making glass
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] making glass
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• [ATM] making glass versus melting glass
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] Melting glass, and using basic compounds to fuse..
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] A Touching Problem
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] making glass
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] 20" Mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] Vol. 12 issue 18 Melting glass
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• [ATM] 40" mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] 40" mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] 40" mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] 40" mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] 40" mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] 40" mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] 40" mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] 40" mirror some ideas
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• [ATM] Re: 40" mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] 40" mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] 40" mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] 40" mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• [ATM] Re: Mirror cell, 40" thoughts
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] What adhesive for tiles on a plaster tool?
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] Three -D Reply...Ronchi Veiw... Learch will notstop.....800lbls of Pyrex....
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] Re: Mirror cell, 40" thoughts
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• Re: [ATM] Re ;Mirror Cells
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• [ATM] First successful view using my home built mirror tester.
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] Square over Round Truss Tube
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] Square over Round Truss Tube
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• [ATM] Next advances is cell design..
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] Eyepiece changes and balance problems
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• [ATM] First view through 10" f5
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] Next advances is cell design..
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] Next advances is cell design..
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] Next advances is cell design..
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• FW: [ATM] Next advances is cell design..
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] PLOP, new developments in mirror support,starte of the art edge support, etc
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] PLOP, new developments in mirror support, starte of
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] PLOP's usefullness.
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] Best webcam/ccd for Foucaultgrams?
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] 40" mirror some ideas
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] 40" mirror some ideas
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] Mirror Cells
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] Paul-Baker, Gregorian variety
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• RE: [ATM] dew heater ..Resistive Paint
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• Re: [ATM] RE: How small a Ritchie Chretien
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] RE: How small a Ritchie Chretien
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] RE: How small a Ritchie Chretien
  • From: Jim Burrows <burrjaw@earthlink.net>
• [ATM] Hartmann (1D) upgrade.
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Star teting a Cassegrain system and DeterminingSecondary Correction
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] RE: How small a Ritichie-Chretien
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] zones
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] 16.5" mirror
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Figuring Help On a 6" F7
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] PLOP, new developments in mirror support, starte ofthe art edge support, etc
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] balancing a serrurier truss
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: [ATM] Re: Eyepiece changes and balance problems
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: [ATM] Re: Eyepiece changes and balance problems
  • From: "Jim Miller" <jim@jtmiller.com>
• [ATM] Materials other than Pyrex
  • From: John Lynch <john_p_lynch2004@yahoo.com>
• [ATM] Re: [ATM) David Williams
  • From: "John Murray" <onslow@bigpond.net.au>
• RE: [ATM] Collapsing truss poles
  • From: "john sherman" <atm@mail.johnspics.com>
• RE: [ATM] Collapsing truss poles
  • From: "john sherman" <atm@mail.johnspics.com>
• Re: [ATM] 20" Mirror
  • From: "john sherman" <atm@mail.johnspics.com>
• Re: [ATM] 40" mirror some ideas
  • From: jroweapp@postoffice.swbell.net
• Re: [ATM] All about hydrostone tools
  • From: <jsmclean1@adelphia.net>
• [ATM] RE: How small a Ritchie Chretien
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• [ATM] RE: How small a Ritchie Chretien
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• [ATM] RE: How small a Ritchie Chretien
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• [ATM] RE: How small a Ritichie-Chretien
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• RE: [ATM] RE: How small a Ritichie-Chretien
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• [ATM] RE: Ray tracer for cheap?
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• [ATM] RE: ATM Digest, Vol 12, Issue 17
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• [ATM] RE: Best webcam/ccd for Foucaultgrams?
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• [ATM] RE: slits and testers
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• [ATM] RE: What adhesive for tiles on a plaster tool?
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• Re: [ATM] Mak corrector plates etc.
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] first tool
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Solar tracking
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• RE: [ATM] .707*Radius (long)
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Cell for David
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Cell for David
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Focal plane-Where is it?
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] RE: How small a Ritichie-Chretien
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] RE: ATM for newbies
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Need some guidance interpreting focualt results
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Re: Eyepiece changes and balance problems
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] stroke question
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Re: Eyepiece changes and balance problems
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] What filters best for a
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Re: Eyepiece changes and balance problems
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] PLOP, new developments in mirror support,starte of the art edge support, etc
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] PLOP, new developments in mirror support,starte of the art edge support, etc
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• RE: [ATM] PLOP Assumptions
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] PLOP, new developments in mirror support, starte of,the art edge support, etc
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• [ATM] Re: ATM Digest, Vol 12, Issue 24
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] 40" mirror
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] The wieght of 1-5/8" Pyrex glass
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• RE: [ATM] 40" mirror some ideas
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Ronchi test photos - Is edge turrned up, down, or OK?
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Ronchi test photos - Is edge turrned up, down, or OK?
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• RE: [ATM] 40" mirror some ideas
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Waineo/Jones null test question
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] first tool
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Odd thoughts and observations and learning from errors
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Re: [ATM) David Williams
  • From: Ken Lowther <hermit@outofoptions.org>
• [ATM] server test
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] server test
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] making glass
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] making glass
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] A Touching Problem
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] What filters are best/language
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] PLOP, new developments in mirror support, starte of theart edge support, etc
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] PLOP's usefullness.
  • From: Ken Lowther <hermit@outofoptions.org>
• RE: [ATM] PLOP's usefullness.
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] 40" mirror
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] 40" mirror
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] 40" mirror
  • From: Ken Lowther <hermit@outofoptions.org>
• RE: [ATM] The wieght of 1-5/8" Pyrex glass
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Re: Star testing with a ronchi test to quantify a TDE
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Re: Star testing with a ronchi test to quantify a TDE
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] 40" mirror some ideas
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] What adhesive for tiles on a plaster tool?
  • From: Ken Lowther <hermit@outofoptions.org>
• Re: [ATM] Re: Casting Pyrex Mirror Blanks
  • From: Ken Lowther <hermit@outofoptions.org>
• [ATM] defocus in holographic null test
  • From: "Koehler, Steve" <Steve_Koehler@securecomputing.com>
• Re: [ATM] .707*Radius
  • From: Lawrence Sayre <lsayre@neo.rr.com>
• Re: [ATM] All about hydrostone tools
  • From: Lawrence Sayre <lsayre@neo.rr.com>
• [ATM] Re: ATM Digest, Vol 12, Issue 13 Edge Support
  • From: "Lee Buse" <lcbuse@comcast.net>
• Subject:Re: Re: [ATM] Re: ATM Digest, Vol 12, Issue 13 Edge Support
  • From: "Lee Buse" <lcbuse@comcast.net>
• [ATM] POLISHING SCRATCHED LENS
  • From: "Lee Chin Huat" <lee@nakano-const.com>
• [ATM] Square over Round Truss Tube
  • From: "Lee Chin Huat" <lee@nakano-const.com>
• [ATM] ANY LENS IN DIGITAL PHOTOCOPY MACHINE ?
  • From: "Lee Chin Huat" <lee@nakano-const.com>
• [ATM] A Touching Problem
  • From: "Lee Chin Huat" <lee@nakano-const.com>
• Re: [ATM] Pyramid shaped, 3 tube open truss
  • From: Leftfieldstar@aol.com
• Re: [ATM] Materials other than Pyrex
  • From: <lenses@adelphia.net>
• Re: RE: [ATM] Holographic Foucault null test
  • From: <lenses@adelphia.net>
• [ATM] Re: Two Stage Truss
  • From: "lou krajci" <loukrajci@comcast.net>
• [ATM] RE: Solar tracking
  • From: "lou krajci" <loukrajci@comcast.net>
• Re: [ATM] Two Stage Truss
  • From: "lou krajci" <loukrajci@comcast.net>
• Re: [ATM] Square over Round Truss Tube
  • From: "lou krajci" <loukrajci@comcast.net>
• Re: [ATM] glue
  • From: luth-astro@earthlink.net
• Re: [ATM] What type of edge support is "state of the art" for a mirror
  • From: luth-astro@earthlink.net
• [ATM] Star teting a Cassegrain system and Determining SecondaryCorrection
  • From: "M/S Heald" <maheald@octa4.net.au>
• Re: [ATM] Solar tracking
  • From: Mac Oglesby <oglesby@sover.net>
• Re: [ATM] Solar tracking
  • From: Mac Oglesby <oglesby@sover.net>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• Re: [ATM] Eyepiece in question
  • From: Maingot Fabrice <Fabrice.Maingot@ipcms.u-strasbg.fr>
• Re: [ATM] dew heater ..Resistive Paint
  • From: "Malcolm Macdonald" <toliman@wave.co.nz>
• [ATM] hilux mirror coatings
  • From: "marco miglionico" <marco.miglionico@blueyonder.co.uk>
• Re: [ATM] glue
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] .707*Radius
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Materials other than Pyrex
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Solar tracking
  • From: Mark Holm <mdholm@telerama.com>
• [ATM] Cell for David
  • From: Mark Holm <mdholm@telerama.com>
• [ATM] Re: Cell for David
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] zones
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] zones
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Cell for David
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Holographic Foucault null test
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] zones
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Zones
  • From: Mark Holm <mdholm@telerama.com>
• Re:[ATM] Holographic Foucault null test
  • From: Mark Holm <mdholm@telerama.com>
• RE: [ATM] RE: ATM for newbies
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] making glass
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] making glass
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Pyramid shaped, 3 tube open truss
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] What type of edge support is "state of the art" for, amirror
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] What type of edge support is "state of the art" for, amirror
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Figuring Help On a 6" F7
  • From: Mark Holm <mdholm@telerama.com>
• Re:[ATM] Next advances is cell design..
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] making glass
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Next advances is cell design..
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Next advances is cell design..
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] PLOP Assumptions
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Next advances is cell design..
  • From: Mark Holm <mdholm@telerama.com>
• RE: [ATM] Next advances is cell design..
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Next advances is cell design..
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Next advances is cell design..
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] PLOP, new developments in mirror support, starte of the,art edge support, etc
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] PLOP, new developments in mirror support, starte of, theart edge support, etc
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] PLOP, new developments in mirror support, starte of, theart edge support, etc
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] 3 point cell for 12 inch ?
  • From: Mark Holm <mdholm@telerama.com>
• [ATM] Re: PLOP designed cell and machining accuracy
  • From: Mark Holm <mdholm@telerama.com>
• RE: [ATM] 24" f/4 lightweight Dob
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] dew heater circuit questions
  • From: Mark Holm <mdholm@telerama.com>
• [ATM] Re: Casting Pyrex Mirror Blanks
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Interpreting DK secondary interference test
  • From: Mark Suchting <masuch@cia.com.au>
• RE: [ATM] making glass
  • From: "Martin Lyons" <mlyons@iafrica.com>
• [ATM] Re: Two Stage Truss
  • From: martin.cibulski@t-online.de
• Re: [ATM] Solar tracking
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] Holographic Foucault null test
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] Next advances is cell design..
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] Next advances is cell design..
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] Next advances is cell design..
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] Re: PLOP Assumptions
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] PLOP's usefullness.
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] PLOP's usefullness.
  • From: "matt" <mariusrf@bellsouth.net>
• [ATM] Re: ATM Digest, Vol 12, Issue 25
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] 40" mirror
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] 40" mirror
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] 40" mirror
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] 40" mirror
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] 40" mirror
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] 40" mirror some ideas
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] 40" mirror some ideas
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] 40" mirror some ideas
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] 40" mirror some ideas
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] 40" mirror some ideas
  • From: "matt" <mariusrf@bellsouth.net>
• Re: [ATM] Beer bottles & producing a glass blank for a telescope
  • From: "Matt Considine" <matt@considine.net>
• Fwd: [ATM] zones
  • From: "Matthew L. Brown" <mlbrown@everstrive.com>
• [ATM] Holographic Foucault null test
  • From: Mauritz Andersson <mauritz@physi.uni-heidelberg.de>
• Re: [ATM] Holographic Foucault null test
  • From: Mauritz Andersson <mauritz@physi.uni-heidelberg.de>
• Re: [ATM] Holographic Foucault null test
  • From: Mauritz Andersson <mauritz@physi.uni-heidelberg.de>
• Re: [ATM] Re: Holographic Foucault null test
  • From: Mauritz Andersson <mauritz@physi.uni-heidelberg.de>
• Re: [ATM] Holographic Foucault null test
  • From: Mauritz Andersson <mauritz@physi.uni-heidelberg.de>
• Re:[ATM] Holographic Foucault null test
  • From: Mauritz Andersson <mauritz@physi.uni-heidelberg.de>
• Re: [ATM] Beer bottles & producing a glass blank for a telescope
  • From: "mconsidine@netreach.net" <mconsidine@netreach.net>
• [ATM] Re: PLOP on point & spot supports and P-V & RMS error
  • From: mdholm@telerama.com
• [ATM] RE: Best webcam/ccd for Foucaultgrams?
  • From: mdholm@telerama.com
• Re: [ATM] What adhesive for tiles on a plaster tool
  • From: mdholm@telerama.com
• Re: [ATM] Graphite question, and yes this is on topic!
  • From: mdholm@telerama.com
• [ATM] Re: All about hydrostone tools
  • From: mdholm@telerama.com
• Re: [ATM] dew heater circuit questions
  • From: mdholm@telerama.com
• Re: [ATM] All about hydrostone tools
  • From: mdholm@telerama.com
• RE: [ATM] Graphite question, and yes this is on topic!
  • From: mdholm@telerama.com
• Re: [ATM] Re: ATM zones
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Pyramid shaped, 3 tube open truss
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] 20" Mirror
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] PLOP Assumptions
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] PLOP, new developments in mirror support,starte of the art edge support, etc
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] PLOP, new developments in mirror support,state of the art edge support, etc
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] PLOP Assumptions
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] 40" mirror
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] 40" mirror some ideas
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Magnitude Limit in Telescope
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] 40" mirror some ideas
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Ronchi test photos - Is edge turrned up, down, or OK?
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Re: Mirror cell, 40" thoughts
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Odd thoughts and observations and learning from errors
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] stroke question
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] FW: re mirror support
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] re mirror support
  • From: Michael Lindner <mikell@optonline.net>
• [ATM] Messag from list owner regarding Plop, etc.
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] RE: How small a Ritichie-Chretien
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: [ATM] Next advances is cell design..
  • From: Michael Peck <mpeck1@ix.netcom.com>
• [ATM] Re: making glass
  • From: "Mike Conran" <mike@guidesys.com>
• [ATM] Re: making glass
  • From: "Mike Conran" <mike@guidesys.com>
• [ATM] Re: 40" mirror
  • From: "Mike Conran" <mike@guidesys.com>
• [ATM] Re: 40" mirror
  • From: "Mike Conran" <mike@guidesys.com>
• [ATM] Re: 40" mirror
  • From: "Mike Conran" <mike@guidesys.com>
• [ATM] Re: 40" mirror
  • From: "Mike Conran" <mike@guidesys.com>
• [ATM] Re: 40" mirror
  • From: "Mike Conran" <mike@guidesys.com>
• [ATM] Re: 40" mirror Annealing stats for Pyrex
  • From: "Mike Conran" <mike@guidesys.com>
• [ATM] Re: 40" mirror more on Pyrex
  • From: "Mike Conran" <mike@guidesys.com>
• [ATM] Re: 40" mirror Pyrex anneal rates
  • From: "Mike Conran" <mike@guidesys.com>
• [ATM] Re: 40" mirror Pyrex glass
  • From: "Mike Conran" <mike@guidesys.com>
• [ATM] Re: 40" mirror -- Glass terms
  • From: "Mike Conran" <mike@guidesys.com>
• Re: [ATM] Focal plane-Where is it?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Cassegrain Secondary testing
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Re: ATM zones
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Interpreting DK secondary interference test
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Interpreting DK secondary interference test
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Interpreting DK secondary interference test
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] All about hydrostone tools
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] All about hydrostone tools
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Metal tools vs. hydrostone, hydrostone mixing note
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] dew heater circuit questions
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] All about hydrostone tools
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] RE: Collapsing truss poles """STOP"""
  • From: Mike Spacedude40 <spacedude40@yahoo.com>
• Re: [ATM] Re: Star testing with a ronchi test to quantify a TDE
  • From: "Mike Spooner" <spoon@PageAmerica.net>
• [ATM] RE: ATM for newbies
  • From: "mlbrown@everstrive.com" <mlbrown@everstrive.com>
• [ATM] RE: ATM for newbies
  • From: "Mold" <mold@telus.net>
• [ATM] What adhesive for tiles on a plaster tool?
  • From: "N1XLP" <n1xlp@triad.rr.com>
• Re: [ATM] 24" f/4 lightweight Dob
  • From: NGC704@aol.com
• Re: [ATM] Cell for David
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] What type of edge support is "state of the art" for a mirror
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• [ATM] about the autocollimator
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] What type of edge support is "state of the art" for a mirror
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: Re: [ATM] What type of edge support is "state of the art" for amirror
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• [ATM] Re: PLOP Assumptions
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] PLOP Assumptions
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• [ATM] Test
  • From: "nunya" <ntent@pctcnet.net>
• Re: [ATM] 40" mirror some ideas
  • From: "Patrick St. Jean" <stjeanp@pat-st-jean.com>
• RE: [ATM] 40" mirror some ideas
  • From: "Patrick St. Jean" <stjeanp@pat-st-jean.com>
• RE: [ATM] Collapsing truss poles
  • From: "Peter" <peter@kitgear.com>
• RE: [ATM] Collapsing truss poles
  • From: "Peter" <peter@kitgear.com>
• RE: [ATM] PLOP Assumptions
  • From: "Peter" <peter@kitgear.com>
• RE: [ATM] 24" f/4 lightweight Dob
  • From: "Peter" <peter@kitgear.com>
• Re: Re: [ATM] What type of edge support is "state of the art" for amirror
  • From: Pierre DESVAUX <pierre.j.desvaux@wanadoo.fr>
• Re: Re: [ATM] Re: Eyepiece changes and balance problems
  • From: Pierre DESVAUX <pierre.j.desvaux@wanadoo.fr>
• Re: Re: [ATM] Re: Eyepiece changes and balance problems
  • From: Pierre DESVAUX <pierre.j.desvaux@wanadoo.fr>
• [ATM] What type of edge support is "state of the art" for a mirror ?
  • From: "pierre.j.desvaux" <pierre.j.desvaux@wanadoo.fr>
• Re: [ATM] Holographic Foucault null test
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] RE: How small a Ritichie-Chretien
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] FW: Oslo short
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] Holographic Foucault null test
  • From: Ric Rokosz <radicell2@yahoo.com>
• [ATM] Best webcam/ccd for Foucaultgrams?
  • From: Ric Rokosz <radicell2@yahoo.com>
• RE: [ATM] 40" mirror some ideas
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] 40" mirror some ideas
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] 40" mirror some ideas
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] Best webcam/ccd for Foucaultgrams?
  • From: Ric Rokosz <radicell2@yahoo.com>
• [ATM] Interesting Doublet
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Triplet too
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Mak corrector plates etc.
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] BK-1
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] RE: How small a Ritchie Chretien
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] OSLO short
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] OSLO short
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Star teting a Cassegrain system and Determining SecondaryCorrection
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Newtonian Corrector (was OSLO short)
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Secondary Color
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Interesting little fractures on pyrex blanks
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Celestial Solstice (Belated)
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Fluorite Instance
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] The wieght of 1-5/8" Pyrex glass
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] 40" mirror some ideas
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• RE: [ATM] Square over Round Truss Tube
  • From: "Richard Klappal" <klappal@xnet.com>
• RE: [ATM] Square over Round Truss Tube
  • From: "Richard Klappal" <klappal@xnet.com>
• RE: [ATM] What filters best for a
  • From: "Richard Klappal" <klappal@xnet.com>
• RE: [ATM] What filters best for a
  • From: "Richard Klappal" <klappal@xnet.com>
• RE: [ATM] PLOP, new developments in mirror support,starte of the art edge support, etc
  • From: "Richard Klappal" <klappal@xnet.com>
• RE: [ATM] PLOP's usefullness.
  • From: "Richard Klappal" <klappal@xnet.com>
• RE: [ATM] PLOP's usefullness.
  • From: "Richard Klappal" <klappal@xnet.com>
• RE: [ATM] Magnitude Limit in Telescope
  • From: "Richard Klappal" <klappal@xnet.com>
• RE: [ATM] 40" mirror
  • From: "Richard Klappal" <klappal@xnet.com>
• [ATM] BK-1
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] PLOP's usefullness.
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] What adhesive for tiles on a plaster tool?
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] All about hydrostone tools
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] All about hydrostone tools
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] RE: What adhesive for tiles on a plaster tool?
  • From: Richard Ozer <rozer@pacbell.net>
• [ATM] Telescope Optics Workshop
  • From: "Richard Schwartz" <richas@earthlink.net>
• [ATM] Focal plane-Where is it?
  • From: "Rob&DonnaF" <TheFifareks@cox.net>
• Re: [ATM] stroke question
  • From: Rocky <wb5ftr@zianet.com>
• [ATM] Interpreting DK secondary interference test
  • From: "Rod Brackenridge" <rjbr@lycos.com>
• Re: [ATM] Interpreting DK secondary interference test
  • From: "Rod Brackenridge" <rjbr@lycos.com>
• Re: [ATM] Interpreting DK secondary interference test
  • From: "Rod Brackenridge" <rjbr@lycos.com>
• Re: [ATM] Collapsing truss poles
  • From: "Rod Shea" <RodShea@comcast.net>
• Re: [ATM] Collapsing truss poles
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: [ATM] Square over Round Truss Tube
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: [ATM] Density of Baltic Birch
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: [ATM] What adhesive for tiles on a plaster tool?
  • From: <rozer@pacbell.net>
• Re: [ATM] What adhesive for tiles on a plaster tool?
  • From: <rozer@pacbell.net>
• [ATM] Beer bottles & producing a glass blank for a telescope
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] ATM Dave Williams and his 3/4" x 20" attempt at a TelescopeMirror
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Melting glass, and using basic compounds to fuse..
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] The wieght of 1-5/8" Pyrex glass
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Three -D Reply...Ronchi Veiw... Learch will not stop.....800lbls of Pyrex....
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• Re: [ATM] balancing a serrurier truss
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] Magnitude Limit in Telescope
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] dew heater circuit questions
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: [ATM] dew heater circuit questions
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• [ATM] Need some guidance interpreting focualt results
  • From: "Scott Krallman" <skrallman@hotmail.com>
• RE: [ATM] 40" mirror some ideas
  • From: "Scott Milligan" <starzkey@charter.net>
• [ATM] list maintenance notice
  • From: simo ivanov <simo@simoivanov.com>
• [ATM] maintenance complete
  • From: simo ivanov <simo@simoivanov.com>
• [ATM] Magnitude Limit in Telescope
  • From: "Stathis Kafalis" <info@stathis-firstlight.de>
• Re: [ATM] Melting glass, and using basic compounds to fuse..
  • From: "Stuart Hutchins" <stuart452@earthlink.net>
• [ATM] Re:ATM focal reducer
  • From: "The Alarm Co." <tac@i1.net>
• [ATM] Mak corrector plates etc.
  • From: "Thomas" <tomjan@ozemail.com.au>
• RE: [ATM] Mak corrector plates etc.
  • From: "Thomas" <tomjan@ozemail.com.au>
• RE: [ATM] first tool
  • From: "Thomas" <tomjan@ozemail.com.au>
• RE: [ATM] The wieght of 1-5/8" Pyrex glass
  • From: "Thomas" <tomjan@ozemail.com.au>
• RE: [ATM] The wieght of 1-5/8" Pyrex glass
  • From: "Thomas" <tomjan@ozemail.com.au>
• RE: [ATM] 40" mirror some ideas
  • From: "Thomas" <tomjan@ozemail.com.au>
• [ATM] Graphite question, and yes this is on topic!
  • From: "Thomas" <tomjan@ozemail.com.au>
• RE: [ATM] Graphite question, and yes this is on topic!
  • From: "Thomas" <tomjan@ozemail.com.au>
• RE: [ATM] Re: Fused Silica Mirror Blank was casting pyrex mirrorblanks.
  • From: "Thomas" <tomjan@ozemail.com.au>
• OT: Tubes (was Re: [ATM] Square over Round Truss Tube)
  • From: "Thomas A. Moulton" <tom@moulton.us>
• [ATM] Re: Casting Pyrex Mirror Blanks
  • From: "Thurmond Moore III" <redmud@caprock-spur.com>
• [ATM] Re: Fused Silica Mirror Blank was casting pyrex mirror blanks.
  • From: "Thurmond Moore III" <redmud@caprock-spur.com>
• Re: [ATM] 40" mirror
  • From: "Tom and Beth" <tomandbeth@theriver.com>
• [ATM] Re: Two Stage Truss
  • From: "Tomandbeth" <tomandbeth@theriver.com>
• RE: [ATM] Collapsing truss poles
  • From: "Treur, Harro" <H.Treur@wlb.amsterdam.nl>
• RE: [ATM] Collapsing truss poles
  • From: "Treur, Harro" <H.Treur@wlb.amsterdam.nl>
• RE: [ATM] Two Stage Truss + ALU-upperring
  • From: "Treur, Harro" <H.Treur@wlb.amsterdam.nl>
• RE: [ATM] hilux mirror coatings
  • From: "Treur, Harro" <H.Treur@wlb.amsterdam.nl>
• RE: [ATM] Next advances is cell design..
  • From: "Treur, Harro" <H.Treur@wlb.amsterdam.nl>
• [ATM] 3 point cell for 12 inch ?
  • From: "Treur, Harro" <H.Treur@wlb.amsterdam.nl>
• [ATM] Re: PLOP designed cell and machining accuracy
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• [ATM] Re ;Mirror Cells
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• Re: [ATM] Solar tracking
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Cell for David
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Holographic Foucault null test
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Pyramid shaped, 3 tube open truss
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] 20" Mirror
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] PLOP, new developments in mirror support,state of the art edge support, etc
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] PLOP, new developments in mirror support,starte of theart edge support, etc
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] PLOP some mirror cell observations
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] PLOP some mirror cell observations
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] PLOP some mirror cell observations
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] The wieght of 1-5/8" Pyrex glass
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] 40" mirror some ideas
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] 40" mirror some ideas
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] All about hydrostone tools
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] dew heater circuit questions
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>