[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: ATM Main mirror cell design - need help with bearings

To: <atm@shore.net>
Subject: Re: ATM Main mirror cell design - need help with bearings
From: "Tom Krajci" <tkrajci@san.osd.mil>
Date: Mon, 16 Dec 2002 17:58:19 +0500
Importance: Normal
In-Reply-To: <E18Ni0Y-0006Ld-00@aquarium.shore.net>
Organization: SAO Tashkenet, Uzbekistan
Reply-To: "Tom Krajci" <tkrajci@san.osd.mil>
Sender: owner-atm@shore.net


From: "clement.focuser" <clement.focuser@verizon.net>

>I posted some illustrations at

>http://groups.yahoo.com/group/atm_free/files/Clement%20Focuser/coax%20c
ollimator/
>to help explain my coaxial collimators. Not shown is the backplate that
the
>three 3/8" rods with hex flats screw into. I will add a phantom view of
the
>backplate later. Hope this helps.


Thank you!

Tom Krajci
Tashkent, Uzbekistan
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.419 / Virus Database: 235 - Release Date: 11/13/2002

Prev by Author: ATM Wire test
Next by Author: Re:ATM Wire test
Prev by thread: Re: ATM Main mirror cell design - need help with bearings
Next by thread: ATM Main mirror focusing - compliant flex-disk designs
Index(es):
- Author
- Thread