Amateur Telescope Makers (ATM) Archive for DEC00 - by author
- RE: ATM Glossary
- From: "(RIA) Durkin, Kenneth M" <k.durkin@state.gov>
- ATM Light traps for Dobsonians
- From: "Mario René Ortiz" <newt145@intelnet.net.gt>
- ATM Cutting aluminum
- From: "Albert Highe" <ahighe@ix.netcom.com>
- RE: ATM Swirling Laser Beams!
- From: "Alsing, Paul" <palsing@harris.com>
- Re: ATM optical view question
- From: "Andrew Schott" <aschott@digital.net>
- Re: ATM Six inch F/10 - good for planetary views?
- From: "Andrew Schott" <aschott@digital.net>
- Re: ATM Maksutov-Newtonian Tube Currents
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM My thoughts on spatially resolved PMT photometry: long
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Off-axis Newtonian?
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM chipped mirror
- From: Andy Saulietis <iss@pvtnetworks.net>
- ATM Sea Scope
- From: Anthony Stillman <atmer@flash.net>
- RE: ATM Sea Scope
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Ultra-Ultra Short Focal Length Mirror
- Re: ATM Question re: polishing a 21" f/6 blank
- Re: ATM 4" scope
- From: Archer Sully <archer@meer.net>
- ATM Figuring
- From: ariond1@carthage.edu
- ATM Cooking a paraboloid
- From: "Arjan te Marvelde (ELN)" <Arjan.te.Marvelde@eln.ericsson.se>
- ATM newbie needs advice on a 10" cell
- From: Assaf Berwald <meshoamam@yahoo.com>
- ATM newbie needs advice on a 10" cell- THANKS!
- From: Assaf Berwald <meshoamam@yahoo.com>
- Re: ATM Thin mirror newbie
- From: "AstroIdiot" <tgooch@arkwest.com>
- Re: ATM Thin mirror newbie
- From: "AstroIdiot" <tgooch@arkwest.com>
- Re: ATM Thin mirror newbie
- From: "AstroIdiot" <tgooch@arkwest.com>
- Re: ATM Thin mirror newbie
- From: "AstroIdiot" <tgooch@arkwest.com>
- Re: ATM Thin mirror newbie
- From: "AstroIdiot" <tgooch@arkwest.com>
- ATM Help DC motor hookup question
- Re: ATM Help DC motor hookup question
- Re: ATM Help DC motor hookup question
- Re: ATM Help DC motor hookup question
- ATM DC motor speed control designs
- Re: ATM Help DC motor hookup question
- Re: ATM Help DC motor hookup question
- Re: ATM Foucault at F/4?
- Re: ATM Bilberry works - Feedback?
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Adaptive Optics Glasses
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Bilberry works - Feedback?
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Antares web site?
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Refractor Baffles & Homemade Star Diagonal
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM OT-Light pollution: Incredible photo
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM OT-Light pollution: Incredible photo
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM weight of an eyepiece
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM weight of an eyepiece
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- ATM Lathe Pros and Cons
- From: "Barry Carter" <chiron@mail.oeonline.com>
- ATM Re: Cassegrain
- From: "Bill Cook" <atmj1@conceptsnet.com>
- ATM Re: Houghton Update
- From: "Bill Cook" <atmj1@conceptsnet.com>
- Re: ATM Fine grinding questions (Take2)
- From: Bill Marriott <btk@pacbell.net>
- ATM Handling big glass
- From: "Bill Prewitt" <bprewitt@neo.rr.com>
- Re: ATM Machine pulley/turntable flanges
- From: "Bill Prewitt" <bprewitt@neo.rr.com>
- Re: ATM Ready to Jump ! Focal length ???
- From: "Bill Prewitt" <bprewitt@neo.rr.com>
- Re: ATM Handling big glass
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Threaded Inserts
- From: "Bill Thornley" <bill_thornley@hotmail.com>
- Re: ATM Re: DIY truss tubes
- From: "Bill Thornley" <bill_thornley@hotmail.com>
- Re: ATM Adaptive Optics Glasses
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Foucault data question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM HTML help
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Deep hole.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Difficulty with figuring f/6 vs f/8 for a beginner ?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM O.K. you idea people
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM optical view question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Ohh ! Tool problem, is it a setback ?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM 16" ~f/7 planetary dobsonian
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Computerized Foucault Test
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Mirror thickness question.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM O.K. you idea people
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Re: Large equitorial mount plans
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Sea Scope
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM How to prevent sleeks at the edge
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM sUB dIAMETER tOOL,
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM crumbling laps
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM DC motor speed control designs
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM How to prevent sleeks at the edge
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Polishing figure
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM RE: CD's as parabolic mirrors?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM To thin for a first mirror?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM 6" final update!
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM crumbling laps
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM DC motor speed control designs
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM DC motor speed control designs
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Machine pulley/turntable flanges
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Help DC motor hookup question
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM seriously confused
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM 16" Acquired - Lower Standards for Larger Mirrors?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Message Traffic Way Down
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Greetings....
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM my 8.5" cass project
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM my 8.5" cass project
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Figuring help
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Off-axis Newtonian?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Sixtests download
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Off-axis Newtonian
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Dried Cerox
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM mirror testing
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Central Hill
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM ronchi patterns vs foucault
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Removing glass from a porthole....
- From: "Bob May" <bobmay@nethere.com>
- ATM Re: PLanets viewed through a 10" dob??
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Optical Windows as Secondary Supports
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Question on using the Ronchi screen.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Hogging out
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Steven Overholt's Book
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM hogging out
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM newbie needs advice on a 10" cell
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Optical Windows as Secondary Supports
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Question on using the Ronchi screen.
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM and lathes
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Schmadel cass test?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Thin mirror newbie
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Schmadel cass test?
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Thin mirror newbie
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM thin glass
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Thin mirror newbie
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM vision
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Thin mirror newbie
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM weight of an eyepiece
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Thin mirror newbie
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Thin mirror newbie
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Ultra-Ultra Short Focal Length Mirror
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Polishing 14" thin mirror with Sub-diameter lap
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Question re: polishing a 21" f/6 blank
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Thin mirror newbie
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Santa brought BVC!
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM weight of an eyepiece
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM pros & cons on a lathe
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Maximum useful FOV
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Polishing 14" thin mirror with Sub-diameter lap
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Foucault light middle
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM softening pitch
- From: "Bob May" <bobmay@nethere.com>
- Re: ATM Polishing out et al...
- From: "Bob May" <bobmay@nethere.com>
- RE: ATM optical view question
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- ATM ronchi patterns vs foucault
- From: Bob Van Deusen <bobmsb@prairie.lakes.com>
- ATM Ronchi VS Fourcault - part 2
- From: Bob Van Deusen <bobmsb@prairie.lakes.com>
- ATM Re: atm and lathes
- ATM To thin for a first mirror?
- From: "Brad :" <brad_92@hotmail.com>
- Re: ATM Bilberry works - Feedback?
- From: Brian Nestel <blast@aloha.net>
- Re: ATM OT-Light pollution: Incredible photo
- From: Brian Nestel <blast@aloha.net>
- Re: ATM - Investment News of Interest to Telescopers
- From: Brian Nestel <blast@aloha.net>
- Re: ATM vision
- From: Brian Nestel <blast@aloha.net>
- Re: ATM vision
- From: Brian Nestel <blast@aloha.net>
- Re: ATM pros & cons on a lathe
- From: Brian Nestel <blast@aloha.net>
- Re: ATM pros & cons on a lathe
- From: Brian Nestel <blast@aloha.net>
- Re: ATM pros & cons on a lathe
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Figuring Stalemate
- From: "Charles O'Donnell" <kozmickid@mindspring.com>
- ATM safety and cutting aluminum
- From: "Charles Taylor" <Chucktaylor3@Integrityol.Com>
- ATM Telescope tubes
- From: "Chris" <chris@pcug.org.au>
- RE: ATM Telescope tubes
- From: "Chris" <chris@pcug.org.au>
- Re: ATM What is speculum?
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- Re: ATM Bilberry works - Feedback?
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- Re: ATM Newbie mistake uncovered
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Passing of an old friend
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM weight of an eyepiece
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Sextant Optics
- From: Chuck Shaw <cshaw@ghg.net>
- ATM thin borosilicat
- From: claudio minutella <minutella@tic.ch>
- ATM using palm to move the scope
- From: claudio minutella <minutella@tic.ch>
- ATM Optical illusion
- From: Clive Milne <milnecd@yahoo.com>
- ATM Frank Ward
- From: Clive Milne <milnecd@yahoo.com>
- ATM Ole Ward replies
- From: Clive Milne <milnecd@yahoo.com>
- ATM re- eyepieces
- From: Clive Milne <milnecd@yahoo.com>
- ATM Re- Coma correction & F-ratio
- From: Clive Milne <milnecd@yahoo.com>
- Re: ATM What is speculum?
- From: Craig Utter <cmutter@bellatlantic.net>
- Re: ATM Optical Windows as Secondary Supports
- From: Craig Utter <cmutter@bellatlantic.net>
- ATM Steel Crucibles
- From: "D. Ray East" <dr.east@usa.net>
- ATM Foucault light middle
- From: "Damien Van Holm" <Damien.Van.Holm@orange.be>
- Re: ATM Deep hole.
- From: "Dan Chaffee" <dchaffee@gvi.net>
- ATM:My best edges
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re: ATM Handling big glass
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Message Traffic Way Down
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM true beauty
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM OT-Light pollution: Incredible photo
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: ATM Steven Overholt's Book
- From: Daniel Fundo <fundo@bellsouth.net>
- ATM 16" ~f/7 planetary dobsonian
- From: Daniel Kahraman <ishtar66@primus.ca>
- ATM Cannot contact Mel Bartels
- From: Daniel Kahraman <ishtar66@primus.ca>
- ATM [Fwd: Mail delivery failed : returning message to sender]
- From: Daniel Kahraman <ishtar66@primus.ca>
- ATM Mirror cells and JB Weld material
- From: Daniel Kahraman <ishtar66@primus.ca>
- ATM Steven Overholt's Book
- From: Daniel Kahraman <ishtar66@primus.ca>
- ATM 40" BVC Blank...
- From: Daniel Kahraman <ishtar66@primus.ca>
- Re: ATM Machine pulley/turntable flanges
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM Machine pulley/turntable flanges
- From: Dave Smith <smithers@ucla.edu>
- ATM Re: flange's
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM Machine pulley/turntable flanges
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM Machine pulley/turntable flanges
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM Adaptive Optics Glasses
- From: Dave Sopchak <dsopchak@mac.com>
- ATM DIY truss tubes- you conduit!
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM Six inch F/10 - good for planetary views?
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM using palm to move the scope
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM 7/8th thick
- From: Dave Sopchak <dsopchak@mac.com>
- Re: ATM Foucault at F/4?
- From: "David H. Bevel" <davebevel@mindspring.com>
- Re: ATM Steven Overholt's Book
- From: "David J. File" <davefile@usa.net>
- ATM Foucault data question
- From: "David Rathbone" <bone777@hotmail.com>
- Re: ATM Difficulty with figuring f/6 vs f/8 for a beginner ?
- From: "David Rathbone" <bone777@hotmail.com>
- RE: ATM Help DC motor hookup question
- From: "David Schuh" <dschuh@attglobal.net>
- RE: ATM Help DC motor hookup question
- From: "David Schuh" <dschuh@attglobal.net>
- ATM Latest Grinding Machine update
- From: "David Schuh" <dschuh@attglobal.net>
- ATM Removing glass from a porthole....
- From: "Day, Jack" <jday@clinitech.net>
- RE: ATM Removing glass from a porthole....
- From: "Day, Jack" <jday@clinitech.net>
- ATM Polishing 14" thin mirror with Sub-diameter lap
- From: "Day, Jack" <jday@clinitech.net>
- RE: ATM Thin mirror newbie
- From: "Day, Jack" <jday@clinitech.net>
- Re: ATM sUB dIAMETER tOOL,
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM DC motor speed control designs
- From: Dennis Rech <dennisrech@home.com>
- ATM Mirror thickness question.
- From: "Dennis Sakva" <findep3@gc.dnepr.energy.gov.ua>
- ATM How to use step drive from 5 inch floppy drive?
- From: "Dennis Sakva" <findep3@gc.dnepr.energy.gov.ua>
- ATM Glossary
- From: "Dennis Sakva" <findep3@gc.dnepr.energy.gov.ua>
- ATM Refractor Baffles & Homemade Star Diagonal
- From: Dennis Woos <wooscons@sover.net>
- RE: ATM Re: DIY truss tubes
- From: "Depack, Ronald" <RDepack@howost.com>
- ATM TDE Shorter ROC
- From: "Depack, Ronald" <RDepack@howost.com>
- RE: ATM 7/8th thick
- From: "Depack, Ronald" <RDepack@howost.com>
- RE: ATM 7/8th
- From: "Depack, Ronald" <RDepack@howost.com>
- ATM thin glass
- From: "designsdavis" <designsdavis@home.com>
- ATM thin glass
- From: "designsdavis" <designsdavis@home.com>
- ATM telescope video
- From: "designsdavis" <designsdavis@home.com>
- Re: ATM Copper tube trusses
- Re: ATM Light Pollution Image
- Re: ATM OT-Light pollution: Incredible photo
- Re: ATM Mirror cells and JB Weld material
- Re: ATM Cross hairs for a finder scope.
- Re: ATM Cross hairs for a finder scope.
- Re: ATM Cross hairs for a finder scope.
- Re: ATM Cross hairs for a finder scope.
- ATM Spatial PMT might have scientific application
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Power formula
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM My thoughts on spatially resolved PMT photometry: long
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM OT-Light pollution: Incredible photo
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM OT-Light pollution: Incredible photo
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Telescope tubes
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM vision
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM vision
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM vision
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM OT-Light pollution: Incredible photo
- From: "Don Clement" <clement@san.rr.com>
- ATM Stick to Big
- From: "Don Clement" <clement@san.rr.com>
- Re: ATM vision
- From: "Don Clement" <clement@san.rr.com>
- Re: ATM pros & cons on a lathe
- From: "Don Clement" <clement@san.rr.com>
- Re: ATM pros & cons on a lathe
- From: "Don Clement" <clement@san.rr.com>
- Re: ATM Steven Overholt's Book
- From: Don Halter <dhalter@ghg.net>
- Re: ATM Asteroid over londen
- From: "Donn Starkey" <starkey@fwi.com>
- Re: ATM Asteroid over londen
- From: "Donn Starkey" <starkey@fwi.com>
- Re: ATM pros & cons on a lathe
- From: "Donn Starkey" <starkey@fwi.com>
- ATM OT-Light pollution: Incredible photo
- From: Donovan Buck <donovan@bravoz.com>
- ATM Reverse Petal
- From: Doug Arion <ariond1@carthage.edu>
- Re: ATM Houghton Update
- From: Doug Miller <mildg@sk.sympatico.ca>
- ATM mirror testing
- From: dt2319 <dt2319@netscapeonline.co.uk>
- ATM Polishing figure
- From: "Duncan Radbourne" <duncan.radbourne@tesco.net>
- ATM Dried Cerox
- From: "Duncan Radbourne" <duncan.radbourne@tesco.net>
- Re: ATM Adaptive Optics Glasses
- From: "Dunk B." <Dunk@Mad.Scientist.com>
- ATM Measurement
- From: "Dunk B." <Dunk@Mad.Scientist.com>
- Re: ATM Foucault data question
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Swirling Laser Beams!
- From: Dwight Elvey <elvey@hal.com>
- RE: ATM optical view question
- From: Dwight Elvey <elvey@hal.com>
- RE: ATM Ohh ! Tool problem, is it a setback ?
- From: Dwight Elvey <elvey@hal.com>
- RE: ATM Sea Scope
- From: Dwight Elvey <elvey@hal.com>
- RE: ATM Help DC motor hookup question
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Help DC motor hookup question
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Cooking a paraboloid
- From: Dwight Elvey <elvey@hal.com>
- ATM RE: CD's as parabolic mirrors?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Newbie mistake uncovered
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM another newbe question
- From: Dwight Elvey <elvey@hal.com>
- ATM Maksutov-Newtonian Tube Currents
- From: Ed Cohen <ec@arcon.com>
- ATM Re:Maksutov Tube Currents
- From: Ed Cohen <ec@arcon.com>
- Re: ATM Re:Maksutov Tube Currents
- From: Ed Cohen <ec@arcon.com>
- Re: ATM Newbie mistake uncovered
- From: "Ed Erbeck Jr." <ed@crazyedoptical.com>
- ATM: Mirror cell for 20" conical mirror
- From: Ed Taychert <elt@irony.com>
- Re: ATM: Mirror cell for 20" conical mirror
- From: Ed Taychert <elt@irony.com>
- ATM State of current projects:
- From: Ed Taychert <elt@irony.com>
- Re: ATM Kydex T vs. Kydex 100
- From: Ed Taychert <elt@irony.com>
- Re: ATM Optical illusion
- From: "Eldereis de Paula" <eldereis@dfm.ffclrp.usp.br>
- Re: ATM Optical illusion
- From: "Eldereis de Paula" <eldereis@dfm.ffclrp.usp.br>
- ATM Ultra-Ultra Short Focal Length Mirror
- From: Eric Green <egreen@exponent.com>
- ATM [OT]: ICs for sale
- From: "Fansler, David" <DFansler@TriPathImaging.com>
- ATM Antares web site?
- From: "Francis Milsom" <fmilsom@lineone.net>
- ATM Merry Christmas message
- From: "Francis Milsom" <fmilsom@lineone.net>
- Re: ATM Cross hairs for a finder scope.
- From: "Francis Milsom" <fmilsom@lineone.net>
- Re: ATM Cross hairs for a finder scope.
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Sub Dia. Lap Help
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Fine grinding questions (Take2)
- From: "Frank" <thewards@mindspring.com>
- ATM Re: Sub dia lap help
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Question re: polishing a 21" f/6 blank
- From: "Frank" <thewards@mindspring.com>
- Re: ATM weight of an eyepiece
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Ready to Jump ! Focal length ???
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Zero expansion glass sources?
- From: "Frank" <thewards@mindspring.com>
- ATM Newbie mistake uncovered
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM Newbie mistake corrected!
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM Re: Did Ward Drop Dead?
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM:My best edges
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM OT-Light pollution: Incredible photo
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- RE: ATM Ohh ! Tool problem, is it a setback ?
- From: "G Hooper" <hooperg@optonline.net>
- RE: ATM Computerized Foucault Test
- From: "G Hooper" <hooperg@optonline.net>
- ATM Fine grinding questions...
- From: "G Hooper" <hooperg@optonline.net>
- ATM Fine grinding questions (Take2)
- From: "G Hooper" <hooperg@optonline.net>
- ATM Ready to Jump ! Focal length ???
- From: "G Hooper" <hooperg@optonline.net>
- ATM Help With Obtaining a Tool
- From: Gary Seronik <gseronik@netway.com>
- ATM Difficulty with figuring f/6 vs f/8 for a beginner ?
- From: GH <jeepfan2@yahoo.com>
- ATM Ohh ! Tool problem, is it a setback ?
- From: GH <jeepfan2@yahoo.com>
- Re: ATM optical view question
- From: GH <jeepfan2@yahoo.com>
- Re: ATM HTML help
- From: GH <jeepfan2@yahoo.com>
- Re: ATM 3" Surplus Shed Project Up-Date
- From: "Great Goo" <greatgoo@baysidenet.net>
- Re: ATM Telescope tubes
- From: "Great Goo" <greatgoo@baysidenet.net>
- Re: ATM Hogging out
- From: "Great Goo" <greatgoo@baysidenet.net>
- Re: ATM Hogging out
- From: "Great Goo" <greatgoo@baysidenet.net>
- ATM Glass
- From: "Great Goo" <greatgoo@baysidenet.net>
- ATM Glass take 2
- From: "Great Goo" <greatgoo@baysidenet.net>
- Re: ATM Bilberry works - Feedback? OT for real.
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Speculum Metal
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Can an 18" mirror be made by hand?
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Thin mirror newbie
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Question re: polishing a 21" f/6 blank
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Re: Bklack Beauty Blasting Grit
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM vision
- From: "Harold" <adams@rmci.net>
- ATM vision
- From: "Harold" <adams@rmci.net>
- RE: ATM more lathe advice - stick to BIG
- From: "Heapy, Chris G" <Chris.Heapy@astrazeneca.com>
- RE: ATM finishing
- From: "Heapy, Chris G" <Chris.Heapy@astrazeneca.com>
- ATM Computerized Foucault Test
- From: Hennecke Marcus <Marcus.Hennecke@temic.com>
- ATM Upper Cage Rings
- ATM Web Site Update
- From: Howard Clausing <hclaus@clausing.com>
- ATM GTO eyepieces
- From: "Hugh Masterson" <mastersonh@hotmail.com>
- Re: ATM Cross hairs for a finder scope.
- From: "Hugo W. Catta" <hugo@optonline.net>
- Re: ATM safety and cutting aluminum
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Removing glass from a porthole....
- From: Ian Stirling <root@mauve.demon.co.uk>
- ATM copper scope
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM update on lathe
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM finishing
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM fork mounts
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM true beauty
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM hogging out
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM cutting glass blanks
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM telescope parts
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- Re: ATM DC motor speed control designs
- ATM DC motor speed control designs
- ATM Test (DO NOT OPEN)
- Re; ATM Cutting Aluminum
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM RE: Astro Chair
- From: James P Crombie <jpcrombie@islandtelecom.com>
- Re: ATM Foucault data question
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Figuring Stalemate
- From: "James W. Burrows" <burrjaw@halcyon.com>
- ATM 2-Diameter testing.
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Deep hole.
- From: "James W. Burrows" <burrjaw@halcyon.com>
- ATM Windows version of SIXTESTS.
- From: "James W. Burrows" <burrjaw@halcyon.com>
- ATM Windows SIXTESTS update.
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Figuring help
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Foucault at F/4?
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Foucault at F/4?
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Test results on professionally figured mirror. Help required.
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Foucault light middle
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Differences between the conic sections..
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM A PLOP result
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM dotting the primary
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM my 8.5" cass project
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM chipped mirror
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM chipped mirror
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM 4" newtonian
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM weight of an eyepiece
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM weight of an eyepiece
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM weight of an eyepiece
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM weight of an eyepiece
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM Re: atm-digest polishing 21" mirror
- From: Jarvis Krumbein <jkoptic@juno.com>
- Re: ATM Handling big glass
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM O.K. you idea people
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM crumbling laps
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM Balance Program
- From: Jeff Morgan <jeffmorgan@mindspring.com>
- ATM HTML help
- From: Jeremy Batterson <jdbaterson@usa.net>
- ATM Thanks for HTML help
- From: Jeremy Batterson <jdbaterson@usa.net>
- Re:ATM Message Traffic Way Down
- From: Jeremy Batterson <jdbaterson@usa.net>
- ATM Did Ward Drop Dead?
- From: Jeremy Batterson <jdbaterson@usa.net>
- ATM Re: Did Ward Drop Dead?
- From: Jeremy Batterson <jdbaterson@usa.net>
- ATM Zoned Refractor
- From: Jeremy Batterson <jdbaterson@usa.net>
- ATM Eclipse Report
- From: Jeremy Batterson <jdbaterson@usa.net>
- ATM optical view question
- From: jldove@home.com (Jerry)
- Re: ATM optical view question
- From: jldove@home.com (Jerry)
- Re: ATM using palm to move the scope
- From: Jim McKay <james.mckay@yale.edu>
- Re: ATM Grinding Machine?
- From: Joe Campbell <joe@esper.com>
- ATM Re: Grinder video.
- From: Joe campbell <joe@esper.com>
- ATM Merry Christmas
- From: Joe Campbell <joe@esper.com>
- Re: ATM copper scope
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Grinding Machine?
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM sUB dIAMETER tOOL,
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Video,
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Power formula
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Scope kit,
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Surplus Shed 3" Project
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM 3" Surplus Shed Project Up-Date
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Balance Program?
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM 7/8th thick
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Thin mirror newbie
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM Thin mirror newbie
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM seriously confused
- From: "john" <jep@greatnorthern.net>
- ATM seriously confused part 2
- From: "john" <jep@greatnorthern.net>
- ATM little-less-confused
- From: "john" <jp@premier1.net>
- ATM another newbe question
- From: "john" <jp@premier1.net>
- Re: ATM Differences between the conic sections..
- From: "John A. Maxwell" <jmax@toad.net>
- Re: ATM vision
- From: "John Sherman" <shermj@netzero.net>
- Re: ATM chipped mirror
- From: John Vogt <atmer@idt.net>
- ATM O.K. you idea people
- From: Joseph Johnston <usc@sover.net>
- Re: ATM O.K. you idea people
- From: Joseph Johnston <usc@sover.net>
- Re: ATM O.K. you idea people
- From: Joseph Johnston <usc@sover.net>
- Re: ATM O.K. you idea people
- From: Joseph Johnston <usc@sover.net>
- Re: ATM O.K. you idea people
- From: Joseph Johnston <usc@sover.net>
- Re: ATM O.K. you idea people
- From: Joseph Johnston <usc@sover.net>
- Re: ATM copper scope
- From: Joseph Johnston <usc@sover.net>
- Re: ATM O.K. you idea people
- From: Joseph Johnston <usc@sover.net>
- Re: ATM O.K. you idea people
- From: Joseph Johnston <usc@sover.net>
- Re: ATM Glossary-source for 1st surface mirrors
- From: Joseph Johnston <usc@sover.net>
- ATM pros & cons on a lathe
- From: Joseph Johnston <usc@sover.net>
- Re: Low-price sales, Re: ATM pros & cons on a lathe
- From: Joseph Johnston <usc@sover.net>
- ATM crumbling laps
- From: jsgrmfg@gracemfg.com
- ATM crumbling laps
- From: jsgrmfg@gracemfg.com
- ATM What is speculum?
- From: "Justin Kelly" <iustus@home.com>
- Re: ATM Scope kit,
- From: Karl E Lewis <kal1971@juno.com>
- ATM Apogee Mak-Cass Optics Set
- From: Karl E Lewis <kal1971@juno.com>
- ATM Dremel-Like Tools
- From: Karl E Lewis <kal1971@juno.com>
- ATM Optical Windows as Secondary Supports
- From: Karl E Lewis <kal1971@juno.com>
- ATM Chicago Area Eclipse Report
- From: Karl E Lewis <kal1971@juno.com>
- ATM Deep hole.
- From: Ken <lowther@att.net>
- Re: ATM Computerized Foucault Test
- From: Ken <lowther@att.net>
- Re: ATM Greetings....
- From: Ken <lowther@att.net>
- ATM Updated spread sheet
- From: Ken <lowther@att.net>
- Re: ATM Houghton Update
- From: Ken <lowther@att.net>
- Re: ATM Glossary
- From: Ken <lowther@att.net>
- Re: ATM and lathes
- From: Ken <lowther@att.net>
- Re: ATM Foucault at F/4?
- From: Ken <lowther@att.net>
- Re: ATM Reverse Petal
- From: Ken <lowther@att.net>
- Re: ATM Ultra-Ultra Short Focal Length Mirror
- From: Ken <lowther@att.net>
- Re: ATM pros & cons on a lathe
- From: Ken <lowther@att.net>
- Re: ATM Re: Bklack Beauty Blasting Grit
- From: Ken <lowther@att.net>
- RE: ATM Windows version of SIXTESTS.
- From: "Ken Bertapelle" <kenb@cqg.com>
- ATM 21" f/6 Mirror - Status Report
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM Dried Cerox
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM Fine grinding questions...
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM vision
- From: "Ken Bertapelle" <kenb@cqg.com>
- ATM Question re: polishing a 21" f/6 blank
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM Question re: polishing a 21" f/6 blank
- From: "Ken Bertapelle" <kenb@cqg.com>
- Re: ATM What is speculum?
- From: Ken Hunter <kb7h@onemain.com>
- ATM Re: Tool movement
- From: Ken Hunter <kb7h@onemain.com>
- Re: ATM Polishing figure
- From: Ken Hunter <kb7h@onemain.com>
- Re: ATM DC motor speed control designs
- From: Ken Hunter <kb7h@onemain.com>
- Re: ATM DC motor speed control designs
- From: Ken Hunter <kb7h@onemain.com>
- Re: ATM 16" Acquired - Lower Standards for Larger Mirrors?
- From: Ken Hunter <kb7h@onemain.com>
- ATM A PLOP result
- From: Ken Lilja <klilja@atl.mediaone.net>
- ATM glass, yech.
- From: Kenneth Scharf <scharkalvin@yahoo.com>
- Re: ATM Difficulty with figuring f/6 vs f/8 for a beginner ?
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM seriously confused
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM seriously confused
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Power formula
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Telescope tubes
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Telescope tubes
- From: Kevin M Whitefire <kwhitefire@juno.com>
- Re: ATM Wood Stove window glass. Is it zero expansion?
- From: Kevin McCarthy <sigma@mediaone.net>
- RE: ATM sUB dIAMETER tOOL,
- From: kevin whitefire <kwhitefire@juno.com>
- Re: ATM photos from 8" f/5 Houghton
- From: "Klaas Honders" <k.honders@worldonline.nl>
- ATM Telescope Optics Workshop
- ATM Slumping glass
- Re: ATM optical view question
- From: Larry Arnold <larry19@home.com>
- Re: ATM DIY truss tubes- you conduit!
- From: Larry Arnold <larry19@home.com>
- ATM Can an 18" mirror be made by hand?
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM Can an 18" mirror be made by hand?
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Wood Stove window glass. Is it zero expansion?
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Foucault at F/4?
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Zero expansion glass sources?
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM Mounting a Fan.
- ATM S&T
- ATM Do you know this site?
- ATM RE: Exit pupil effects
- From: lindbergs1 <lindbergs1@home.com>
- Re: ATM Six inch F/10 - good for planetary views?
- From: lindbergs1 <lindbergs1@home.com>
- ATM Sixtests download
- From: lindbergs1 <lindbergs1@home.com>
- Re: ATM Central Hill
- From: lindbergs1 <lindbergs1@home.com>
- Re: ATM Ronchi VS Fourcault - part 2
- From: lindbergs1 <lindbergs1@home.com>
- Re: ATM Polishing 14" thin mirror with Sub-diameter lap
- From: lindbergs1 <lindbergs1@home.com>
- ATM Re: atm-digest V1 #2404
- ATM Re: atm-digest V1 #2404
- DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
- From: Mail System Internal Data <MAILER-DAEMON@system.umsystem.edu>
- Re: ATM 4" scope
- From: Mal J MacDonald <malmac2@juno.com>
- Re: ATM Sixtests download
- From: Mal J MacDonald <malmac2@juno.com>
- ATM Question on using the Ronchi screen.
- From: Mal J MacDonald <malmac2@juno.com>
- Re: ATM vision
- From: Malcolm Macdonald <toliman@wave.co.nz>
- ATM Some questions
- From: "Manuel Postec" <pcmanu@hotmail.com>
- Re: ATM Some questions
- From: "Manuel Postec" <pcmanu@hotmail.com>
- ATM Program to convert atm digest messages to HTML
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM optical view question
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM seriously confused
- From: "Mark D. Holm" <mdholm@telerama.com>
- ATM Sizes for carry-on travel scopes.
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM: A Topic of Substance
- From: "Matt Considine" <matt@considine.net>
- Flexing a corrector? [was Re: ATM Optical Windows as Secondary Supports]
- From: "Matt Considine" <matt@considine.net>
- Re: ATM Figuring Stalemate
- From: mausoptik@t-online.de (mausoptik@t-online.de)
- Re: ATM Maksutov-Newtonian Tube Currents
- From: mausoptik@t-online.de (mausoptik@t-online.de)
- Re: ATM Figuring
- From: mausoptik@t-online.de (mausoptik@t-online.de)
- ATM astro-chair
- From: mausoptik@t-online.de (mausoptik@t-online.de)
- Re: ATM Cross hairs for a finder scope.
- From: mausoptik@t-online.de (mausoptik@t-online.de)
- ATM Astigmatism
- From: mausoptik@t-online.de (mausoptik@t-online.de)
- Re: ATM Glass - something else...
- From: mausoptik@t-online.de (mausoptik@t-online.de)
- ATM Copper tube trusses
- ATM Re: DIY truss tubes
- Re: ATM Re: DIY truss tubes
- RE: ATM Difficulty with figuring f/6 vs f/8 for a beginner ?
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Light traps for Dobsonians
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM optical view question
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM optical view question
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Cannot contact Mel Bartels
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM using palm to move the scope
- From: "Mel Bartels" <mbartels@efn.org>
- list owner comment, was RE: ATM - Investment News of Interest to Telescopers
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Steven Overholt's Book
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Can an 18" mirror be made by hand?
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Thin mirror newbie
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Reverse Petal
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM weight of an eyepiece
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM vision
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM weight of an eyepiece
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM weight of an eyepiece
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Ready to Jump ! Focal length ???
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Maximum useful FOV
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM Re: Large equitorial mount plans
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM How to use step drive from 5 inch floppy drive?
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM chipped mirror
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Hogging out
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM weight of an eyepiece
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Sizes for carry-on travel scopes.
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Question re: polishing a 21" f/6 blank
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Polishing 14" thin mirror with Sub-diameter lap
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Thin mirror newbie
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Test results on professionally figured mirror. Help required.
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM A PLOP result
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM HTML help
- From: Michael Lindner <mikell@optonline.net>
- RE: ATM Sites for Tubing... +++++++++++++
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Greetings....
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Upper Cage Rings
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM 40" BVC Blank...
- From: Michael Lindner <mikell@optonline.net>
- RE: ATM Telescope tubes
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Steven Overholt's Book
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM astro-chair
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM telescope video
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Maximum useful FOV
- From: Michael Lindner <mikell@optonline.net>
- Re: ATM Computerized Foucault Test
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Schmadel cass test?
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Foucault at F/4?
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM DIZZY! (My Head is spinning...)
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM life's a pitch
- From: Mike Gerfen <mgerfen@caltech.edu>
- Re: ATM Adaptive Optics Glasses
- From: Mike Selfridge <scifiguy@tstonramp.com>
- Re: ATM O.K. you idea people
- From: mjc5 <mjc5@psu.edu>
- Re: ATM optical view question
- From: mjc5 <mjc5@psu.edu>
- Re: ATM O.K. you idea people
- From: mjc5 <mjc5@psu.edu>
- Re: ATM optical view question
- From: mjc5 <mjc5@psu.edu>
- Re: ATM O.K. you idea people
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Six inch F/10 - good for planetary views?
- From: mjc5 <mjc5@psu.edu>
- Re: ATM How to prevent sleeks at the edge
- From: mjc5 <mjc5@psu.edu>
- Re: ATM DC motor speed control designs
- From: mjc5 <mjc5@psu.edu>
- Re: ATM DC motor speed control designs
- From: mjc5 <mjc5@psu.edu>
- Re: ATM seriously confused part 2
- From: mjc5 <mjc5@psu.edu>
- ATM Re: Did Ward Drop Dead?
- From: mjc5 <mjc5@psu.edu>
- Re: ATM OT-Light pollution: Incredible photo
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Mirror cells and JB Weld material
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Hogging out
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Optical Windows as Secondary Supports
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Optical Windows as Secondary Supports
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Optical Windows as Secondary Supports
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Fine grinding questions...
- From: mjc5 <mjc5@psu.edu>
- Re: ATM vision
- From: mjc5 <mjc5@psu.edu>
- Re: ATM vision
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Ultra-Ultra Short Focal Length Mirror
- From: mjc5 <mjc5@psu.edu>
- Re: ATM weight of an eyepiece
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Sizes for carry-on travel scopes.
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Glass
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Glass take 2
- From: mjc5 <mjc5@psu.edu>
- ATM Re: Bklack Beauty Blasting Grit
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Glass - something else...
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Re: Bklack Beauty Blasting Grit
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Re: Bklack Beauty Blasting Grit
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Glass - something else...
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Re: Bklack Beauty Blasting Grit
- From: mjc5 <mjc5@psu.edu>
- ATM Central Hill
- From: "Myers, Alan" <AMyers@IKON.com>
- Re: ATM Upper Cage Rings
- Re: ATM Steven Overholt's Book
- RE: ATM 4" scope
- From: Nick Cain <nick.cain@navisworks.com>
- Re: ATM Computerized Foucault Test
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Power formula
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Newbie mistake uncovered
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Telescope tubes
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Cross hairs for a finder scope.
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Foucault at F/4?
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM vision
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Foucault at F/4?
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Cross hairs for a finder scope.
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM weight of an eyepiece
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Foucault at F/4?
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Maximum useful FOV
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- ATM Maximum useful FOV
- From: "Olle Eriksson" <mail@olle-eriksson.com>
- Re: ATM Maximum useful FOV
- From: "Olle Eriksson" <mail@olle-eriksson.com>
- ATM Six inch F/10 - good for planetary views?
- ATM weight of an eyepiece
- From: Patrick Hudelot <hudelot@clipper.ens.fr>
- Re: ATM weight of an eyepiece
- From: Patrick Hudelot <hudelot@clipper.ens.fr>
- Re: ATM Optical Windows as Secondary Supports
- From: Paul Cousoulis <paulcsouls@worldnet.att.net>
- Re: ATM Cross hairs for a finder scope.
- From: Paul Cousoulis <paulcsouls@worldnet.att.net>
- ATM Re: atm-digest V1 #2379
- Re: ATM Machine pulley/turntable flanges
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM and lathes
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM and lathes
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM vision
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Ultra-Ultra Short Focal Length Mirror
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Differences between the conic sections..
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM pros & cons on a lathe
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- ATM Recent emails to me
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Optical illusion
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Power formula
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Off-axis Newtonian
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM and lathes - Al on a wood lathe ???
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Optical Windows as Secondary Supports
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM hogging out
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Optical Windows as Secondary Supports
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM and lathes
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM weight of an eyepiece
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Bklack Beauty Blasting Grit
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM pros & cons on a lathe
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM Differences between the conic sections..
- From: "Peter John Smith" <pjifl@bigpond.com.au>
- Re: ATM true beauty
- From: "Peter Ulfheden" <peter@hmab.se>
- Re: ATM Steel Crucibles
- From: Philip Tramdack <tramdack@TCNJ.EDU>
- Re: ATM Optical Windows as Secondary Supports
- From: Philip Tramdack <tramdack@TCNJ.EDU>
- Re: ATM Windows version of SIXTESTS.
- From: "Poul Linnet" <kam1842@vip.cybercity.dk>
- ATM Cross hairs for a finder scope.
- RE: ATM Finding Porthole glass- Was-Removing glass from a porthole....
- From: Randy Johnson <Rjohnson@RADARINC.com>
- RE: ATM weight of an eyepiece
- From: Randy Johnson <Rjohnson@RADARINC.com>
- Re: ATM Steven Overholt's Book
- From: "rguinamard" <rguinamard@infonie.fr>
- ATM Mirror thickness question.
- From: rhill@LPL.Arizona.EDU
- Re: ATM Six inch F/10 - good for planetary views?
- From: rhill@LPL.Arizona.EDU
- Re: ATM Mirror cells and JB Weld material
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Fine grinding questions...
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- ATM Schmadel cass test?
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Schmadel cass test?
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Thin mirror newbie
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Cross hairs for a finder scope.
- From: Ricardo Dunna <rdunna@infolink.com.br>
- RE: ATM Ultra-Ultra Short Focal Length Mirror
- From: "Richard Klappal" <klappal@xnet.com>
- RE: ATM Question re: polishing a 21" f/6 blank
- From: Richard Ozer <rozer@ois-online.com>
- Re: ATM optical view question
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Mirror thickness question.
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Re: Mirror cell for 20" conical mirror
- From: "Richard Schwartz" <richas@earthlink.net>
- ATM Free Journals? Get 'Em Now!
- From: "Richard Schwartz" <richas@earthlink.net>
- ATM Message Traffic Way Down
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Power formula
- From: "Richard Schwartz" <richas@earthlink.net>
- ATM: A Topic of Substance
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Central Hill
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Optical Windows as Secondary Supports
- From: "Richard Schwartz" <richas@earthlink.net>
- ATM - Investment News of Interest to Telescopers
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM vision
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Ultra-Ultra Short Focal Length Mirror
- From: "Richard Schwartz" <richas@earthlink.net>
- Re: ATM Question re: polishing a 21" f/6 blank
- From: "Richard Schwartz" <richas@earthlink.net>
- ATM Greetings....
- From: Richard Stanaford <rsstan@yahoo.com>
- Re: ATM Measurement
- From: Richard Stanaford <rsstan@yahoo.com>
- ATM Differences between the conic sections..
- From: Richard Stanaford <rsstan@yahoo.com>
- Re: ATM Glass - something else...
- From: Richard Stanaford <rsstan@yahoo.com>
- Re: ATM Glass - something else...
- From: Richard Stanaford <rsstan@yahoo.com>
- ATM Swirling Laser Beams!
- From: richard.soennichsen@philips.com
- ATM life's a pitch
- From: Rik Hill <rhill@LPL.Arizona.EDU>
- ATM Passing of an old friend
- From: Rik Hill <rhill@LPL.Arizona.EDU>
- Re: ATM How to prevent sleeks at the edge
- From: "Rodger Petersen" <faintfuzzy@msn.com>
- ATM: orphan mirror
- From: Roger Carr <carr@SLAC.Stanford.EDU>
- ATM Speculum Metal
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Off-axis Newtonian?
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Maksutov Tube Currents
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Off-axis Newtonian
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Off-axis Newt.
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Mounting a Fan.
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Light Pollution Image
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Houghton Update
- From: Roger Ceragioli <rogerc@dakotacom.net>
- Re: ATM Houghton Update
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Sub Dia. Lap Help
- From: Ron DePack <depack@interpow.net>
- ATM 4" scope
- From: Ron Forrester <rjf@skyhackers.org>
- Re: ATM 4" scope
- From: Ron Forrester <rjf@skyhackers.org>
- Re: ATM Thin mirror newbie
- From: Ron Forrester <rjf@skyhackers.org>
- ATM Polishing out et al...
- From: Ron Forrester <rjf@skyhackers.org>
- ATM sorry for off-topic, trying to find someone
- From: Ron Gabbert <rgabbert@cox.rr.com>
- Re: ATM Steven Overholt's Book
- From: "Roy Diffrient" <diffrent@bcpl.net>
- Re: ATM To thin for a first mirror?
- From: Ryan Hess <atmryan@excite.com>
- Re: ATM To thin for a first mirror?
- From: Ryan Hess <atmryan@excite.com>
- ATM Machine pulley/turntable flanges
- From: Ryan Hess <atmryan@excite.com>
- Re: ATM Machine pulley/turntable flanges
- From: Ryan Hess <atmryan@excite.com>
- RE: ATM Sea Scope
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM Sea Scope
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM Off-axis Newt.
- From: Scott Milligan <starzkey@banet.net>
- Re: ATM O.K. you idea people
- From: "Scott Neuman" <scott_neuman@hotmail.com>
- Re: ATM Six inch F/10 - good for planetary views?
- From: "Scott Neuman" <scott_neuman@hotmail.com>
- Re: ATM Mirror Grinding Machine
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- ATM RE: Copper or Conduit Truss Tubes +++++++++
- From: "Shankland, Paul CDR (CVN71 STRIKE)" <shankland@roosevelt.navy.mil>
- RE: ATM Sites for Tubing... +++++++++++++
- From: "Shankland, Paul CDR (CVN71 STRIKE)" <shankland@roosevelt.navy.mil>
- ATM RE: " A matter of substance" RTV Silicone
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM RE: " A matter of substance" RTV Silicone
- From: "Sidor . Kurt" <KSidor@drc.com>
- Re: ATM Houghton Update
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM Asteroid over londen
- From: Simon Fourstar <sfourstar@earthlink.net>
- Re: ATM Bilberry works - Feedback?
- From: "stan" <natsp@alltel.net>
- Re: ATM more lathe advice - stick to BIG
- From: "stan" <natsp@alltel.net>
- ATM roll off roof
- From: "stan" <natsp@alltel.net>
- Re: ATM Re: Large equitorial mount plans
- From: "stan" <natsp@alltel.net>
- Re: ATM Optical illusion
- From: "stan" <natsp@alltel.net>
- Re: ATM DC motor speed control designs
- From: "stan" <natsp@alltel.net>
- Re: ATM OT-Light pollution: Incredible photo
- From: "stan" <natsp@alltel.net>
- Re: ATM Removing glass from a porthole....
- From: "stan" <natsp@alltel.net>
- Re: ATM Removing glass from a porthole....
- From: "stan" <natsp@alltel.net>
- ATM 2.5 meter lightweight mirror making..
- From: "stan" <natsp@alltel.net>
- Re: ATM Thin mirror newbie
- From: "stan" <natsp@alltel.net>
- Re: ATM Glass - something else...
- From: "stan" <natsp@alltel.net>
- Re: ATM Glass - something else...
- From: "stan" <natsp@alltel.net>
- Re: ATM DIZZY! (My Head is spinning...)
- From: "stan" <natsp@alltel.net>
- ATM Bklack Beauty Blasting Grit
- From: "Stanley A. Schultz" <schultz@ucalgary.ca>
- ATM Re: Mirror cell for 20" conical mirror
- From: "Stathis Kafalis" <s.kafalis@planet-interkom.de>
- ATM How to prevent sleeks at the edge
- From: "Stathis Kafalis" <s.kafalis@planet-interkom.de>
- Re: ATM crumbling laps
- From: "Stathis Kafalis" <s.kafalis@planet-interkom.de>
- Re: ATM Question re: polishing a 21" f/6 blank
- From: "Stathis Kafalis" <s.kafalis@planet-interkom.de>
- ATM Test results on professionally figured mirror. Help required.
- From: "Steve Chambers" <smunch@clara.co.uk>
- Re: ATM Adaptive Optics Glasses
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Bilberry works - Feedback? OT for real.
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Difficulty with figuring f/6 vs f/8 for a beginner ?
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Ohh ! Tool problem, is it a setback ?
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM: A Topic of Substance
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM thin borosilicat
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Upper Cage Rings
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM OT-Light pollution: Incredible photo
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM chipped mirror
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM and lathes
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM 4" newtonian
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM vision
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Fine grinding questions (Take2)
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Ready to Jump ! Focal length ???
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM pros & cons on a lathe
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Glass - something else...
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM softening pitch
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Re: Bklack Beauty Blasting Grit
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Re: Bklack Beauty Blasting Grit
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Lathe Pros and Cons
- From: "Theuns Pelser" <THEUNS.PELSER@eskom.co.za>
- Re: ATM Glass - something else...
- From: "Theuns Pelser" <THEUNS.PELSER@eskom.co.za>
- ATM New Millennium
- From: "Theuns Pelser" <THEUNS.PELSER@eskom.co.za>
- RE: ATM optical view question
- From: "Thomas A Simmons" <tasimmons@west.raytheon.com>
- Re: ATM more lathe advice - stick to BIG
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- Re: ATM optical view question
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- Re: ATM Ultra-Ultra Short Focal Length Mirror
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- ATM 16" Acquired - Lower Standards for Larger Mirrors?
- From: thomas.d.bennett@lmco.com
- ATM Santa brought BVC!
- From: "Tim Huntington" <timh615@earthlink.net>
- ATM Thank you everyone (re: Santa)
- From: "Tim Huntington" <timh615@earthlink.net>
- Re: ATM Glass
- From: Tim Walters <trwalters@mindspring.com>
- ATM DIZZY! (My Head is spinning...)
- From: Tim Walters <trwalters@mindspring.com>
- ATM Flexing - Neoprene question
- From: Timo Nordberg <mybrightstar@usa.net>
- Measuring Moon Diameter (re ATM optical view question)
- From: "Timothy Huntington" <timh615@earthlink.net>
- Re: ATM Foucault at F/4?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM and lathes
- From: "Tom and Beth Simmons" <tomandbeth@theriver.com>
- re: ATM and lathes
- From: "Tom and Beth Simmons" <tomandbeth@theriver.com>
- ATM Figuring Stalemate
- From: "TomPolk1" <TomPolk1@email.msn.com>
- ATM Polishing Stalemate
- From: "TomPolk1" <TomPolk1@email.msn.com>
- ATM Figuring help
- From: "TomPolk1" <TomPolk1@email.msn.com>
- ATM photos from 8" f/5 Houghton
- From: Torsten Clay <tclay@theriver.com>
- Re: ATM Re:Maksutov Tube Currents
- From: Torsten Clay <tclay@theriver.com>
- Re: ATM Re:Maksutov Tube Currents
- From: Torsten Clay <tclay@theriver.com>
- Re: ATM Houghton Update
- From: Torsten Clay <tclay@theriver.com>
- Re: ATM Re: Houghton Update
- From: Torsten Clay <tclay@theriver.com>
- My ATM webpage
- ATM 6" final update!
- ATM my 8.5" cass project
- ATM Hogging out
- Re: ATM Thin mirror newbie
- ATM softening pitch
- ATM cassegrain collimation
- Re: ATM Re: Bklack Beauty Blasting Grit
- ATM Re: Bklack Beauty Blasting Grit (Obsidian?)
- Re: ATM Re: Bklack Beauty Blasting Grit
- Re: ATM softening pitch
- From: "Wayne Churchill" <wchurchill2nh@hotmail.com>
- ATM Re: Large equitorial mount plans
- From: "William Barnhill" <wlbarnhill@ratedg.com>
- Re: ATM Removing glass from a porthole....
- From: "William Barnhill" <wlbarnhill@viafamily.com>
- ATM Re: doughboy
- From: "William Cook" <atmj1@conceptsnet.com>
- ATM wafer
- From: "Yvonne & Alexander Urban" <alexander.urban@gmx.de>
- ATM 4" newtonian
Mail converted by MHonArc 2.1.0