ATM A question, if I may?

[starlord@qnet.com (Slc.Dennis Bishop)]

Below is a question from a guy who has one of those new orion dob's,
as I've never worked with  anything like that maybe someone here can
give him some advice.

The following is from: edmoran@deltanet.com ("Edward J. Moran" )

Hello Dennis,

I removed the mirror cell today to put a spot at the center for =
collimation purposes. I noticed that the mirror is held in place with =
three, L shaped rubber clamps (one was so loose it was rattling!). How =
tight should I tighten the clamp screws? I don't want to distort the =
mirror (about 1 inch thick), but I don't want it to move around too much =
either.

Thanks in advance!

Edward J. Moran
edmoran@deltanet.com



*---------------------------------------------*
| Slc.Dennis Bishop Founder & Lifetime Member |
| SIAR (1971)   /  IAR (1995                  |
*---------------------------------------------*