Amateur Telescope Makers (ATM) Archive for AUG99 - by author
- ATM - Abrasive Water Jets (long)
- From: Adam Perkins <scopeguru@yahoo.com>
- ATM - a 'scope for the classroom
- From: Adam Perkins <scopeguru@yahoo.com>
- Re: ATM Wood circle cutting
- From: Adam Perkins <scopeguru@yahoo.com>
- ATM - Windows CE (Palmtop Computers)
- From: Adam Perkins <scopeguru@yahoo.com>
- Re: ATM Ritchey-Chrétien
- From: Adam Perkins <scopeguru@yahoo.com>
- Re: ATM Tube or struts
- From: Adam Perkins <scopeguru@yahoo.com>
- ATM mirror
- From: Adams <adams@rmci.net>
- ATM Primary to Secondary Distance Calculation
- From: "Al Klayton" <aklayton@pcisys.net>
- ATM Making a Pitch Lap
- From: Andrew Lin <alin@qualcomm.com>
- Re: ATM Making a Pitch Lap
- From: Andrew Lin <alin@qualcomm.com>
- Re: ATM Chipping and polishing
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM stepper motor controller
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM time estimate for polishing
- Re: ATM time estimate for polishing
- Re: ATM - Windows CE (Palmtop Computers)
- From: Archer Sully <archer@meer.net>
- Re: ATM Focal plane strobe
- From: Archer Sully <archer@meer.net>
- ATM here's another pulsar idea...
- From: Archer Sully <archer@meer.net>
- Re: ATM How to remove silicone glue?
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM New design & Fiberglass question
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Fiberglass tubes
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Fiberglass weight
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM I did it!
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Dave's Scope
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Finnal decision
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Ritchey-Chrétien
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Laser Collimation
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- Re: ATM Laser Collimation
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- Re: ATM Laser Collimation
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Starting!
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM ASTRO? off topic
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM R-C questions
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Making the tool
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Problems with tool!
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM important?
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Adding Dental Stone to already-made-tool
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Quick questions
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM My Tool from Plaster of Paris
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Tool bottom-flatness
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Plaster Layer on Dental stone?
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Plaster Layer on Dental stone?
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- ATM Finnaly- tool results
- From: "Asaf S.-T." <dark_observer@yahoo.com>
- RE: ATM Chamfering tool
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- ATM Lowest power for splitting Epsilon Lyrae with a 6"
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- RE: ATM Lowest power for splitting Epsilon Lyrae with a 6"
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- RE: ATM Pitch substitutes
- From: "Ashish, Balaya (IE10)" <ABalaya@meghadoot.hiso.honeywell.com>
- Re: ATM rubylithe
- ATM blanks from Newport Glass Works
- ATM Grinding machine ratios
- Re: ATM Grinding machine ratios
- Re: ATM Grinding machine ratios
- ATM What kind of pitch & abrasives
- Re: ATM Grinding machine ratios
- ATM making a corrector for SCT
- Re: ATM making a corrector for SCT
- Re: ATM Lowest power for splitting Epsilon Lyrae
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- RE: ATM - a 'scope for the classroom
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM - a 'scope for the classroom
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM glue
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- RE: ATM Tube currents?
- From: "Bertapelle, Ken" <Bertapelle.Ken@tci.com>
- Re: ATM Daisy Finder-Removing coating
- From: "Bill Cotten" <billsas@worldnet.att.net>
- Re: ATM Daisy Finder
- From: "Bill Cotten" <billsas@worldnet.att.net>
- Re: ATM vs. Daisy coating
- From: "Bill Cotten" <billsas@worldnet.att.net>
- ATM books
- From: billcox <bilbo@primeline.com>
- Re: ATM Focal plane strobe
- From: Bob Bond <rgb@ncube.com>
- Re: ATM here's another pulsar idea...
- From: Bob Bond <rgb@ncube.com>
- Re: ATM here's another pulsar idea...
- From: Bob Bond <rgb@ncube.com>
- RE: ATM "more normal" scope pix
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: ATM "more normal" scope pix
- From: Bob Prabowo <BOB@bahana.co.id>
- ATM Advise, please...
- From: Bob Prabowo <BOB@bahana.co.id>
- RE: ATM Scratches during fine grinding
- From: Bob Prabowo <BOB@bahana.co.id>
- Re: ATM Daisy Finder
- From: Bob Smallwood <smallwood@technologist.com>
- Re: ATM What are the min requirements for the CCD Cookbook Camera's PCcontroller?
- From: "bprewitt" <bprewitt@neo.rr.com>
- Re: ATM "more normal" scope pix
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Panasonic Printer Motors
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Desert
- From: Brad Davy <bdavy@fred.net>
- Re: ATM Seeking the secrets of life or at least mirror polishing
- From: Bradley Davy <bdavy@fred.net>
- ATM stepper motor controller
- From: Bradley Davy <bdavy@fred.net>
- Re: ATM Carbon fibre + aluminum tube.
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM Carbon fibre + aluminum tube.
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM Scratches during fine grinding
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM Pitch scouring vs figuring
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM Pitch substitutes
- From: "Brent Russell" <brussel@global.co.za>
- ATM Stepper motor control
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM Help for designing eyepieces
- From: "Brent Russell" <brussel@global.co.za>
- Re: ATM: fork mount
- From: Brian Nestel <blast@aloha.net>
- Re: ATM How to remove silicone glue?
- From: Brian Nestel <blast@aloha.net>
- Re: ATM rubylithe
- From: Brian Nestel <blast@aloha.net>
- Re: ATM film
- From: Brian Nestel <blast@aloha.net>
- Re: ATM film
- From: Brian Nestel <blast@aloha.net>
- Re: ATM A question, if I may?
- From: Brian Nestel <blast@aloha.net>
- Re: ATM A question, if I may?
- From: Brian Nestel <blast@aloha.net>
- Re: ATM cookbook 245 and computer power supply
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Un-cementing Prisms
- From: Brian Nestel <blast@aloha.net>
- Re: ATM Motor control
- From: Brian Nestel <blast@aloha.net>
- Re: ATM making a corrector for SCT
- From: Brian Nestel <blast@aloha.net>
- Re: ATM :Hartman software "free"
- From: Brian Nestel <blast@aloha.net>
- Re: ATM here's another pulsar idea...
- From: Brian Nestel <blast@aloha.net>
- Re: ATM:CCD focal plane
- From: Brian Nestel <blast@aloha.net>
- ATM Web site fixed
- From: "Bruce Sayre" <sayre@foothill.net>
- ATM 12.5" binocular telescope
- From: "Bruce Sayre" <sayre@foothill.net>
- Re: ATM binocular scopes
- From: "Bruce Sayre" <sayre@foothill.net>
- ATM RFT References Sought
- From: Bruce Weertman <brucew@wrq.com>
- ATM new Meade 4.5" Electronic Control
- ATM starting atm
- From: "Can Filiz" <ccxwqt@hotmail.com>
- ATM about the eclipse
- From: "Can Filiz" <ccxwqt@hotmail.com>
- Re: ATM Grinding machine ratios
- From: Cary Chleborad <bennu@ns.net>
- ATM Polishing Nickel
- From: Cary Chleborad <bennu@ns.net>
- Re: ATM Polishing Nickel
- From: Cary Chleborad <bennu@ns.net>
- RE: ATM What are the min requirements for the CCD Cookbook Camera's PCcontroller?
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: ATM What are the min requirements for the CCD Cookbook Camera's PCcontroller?
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- ATM Astrola restoration
- From: "Chalfan, Richard D" <Richard.Chalfan@pss.boeing.com>
- RE: ATM Too close to blow it now
- From: "Chalfan, Richard D" <Richard.Chalfan@PSS.boeing.com>
- RE: Re: ATM
- RE: RE: ATM
- RE: Re: ATM rubylithe
- RE: Re: ATM camcorder settings
- ATM Lensing a Dob
- ATM Wood circle cutting
- RE: Re: ATM Tube Holder
- RE: ATM binocular scopes
- RE: Re: ATM Guy need Help
- RE: Re: ATM binocular scopes& focal extenders
- ATM Dental Stone
- From: Chris Adams <cdadams@concentric.net>
- Sources of ATM parts in the Bay area
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- Re: ATMing in the October Sky & Telescope
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- Re: ATM tube or struts
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- Re: ATM My 10" Dob completed
- From: Christopher Krubel <ckrubel@bellsouth.net>
- Re: ATM Cassegrain automation
- From: Christopher Krubel <ckrubel@bellsouth.net>
- Re: ATM "more normal" scope pix
- From: Christopher Krubel <ckrubel@bellsouth.net>
- ATM Three cheers for Chandra and NASA!
- From: Christopher Krubel <ckrubel@bellsouth.net>
- Re: ATM RFT/Pluto and Charon
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM RFT/Pluto and Charon
- From: Chuck Dethloff <telmor@teleport.com>
- Re: ATM Focal plane strobe
- From: Chuck Dethloff <telmor@teleport.com>
- ATM Woodshop Telescopes Plans Posted
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM plossl design??
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM epoxy mirrors
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM "Buena Vista" home-made Plossls- Report -
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM camcorder settings
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM film
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM "Buena Vista" home-made Plossls
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM "Buena Vista" home-made Plossl eyepieces
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Chuck's projects on the Web
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Tomas' concerns
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM: comments on Eli's site
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Plossls from budget binos
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM tube or struts
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Cradle
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM tube or struts
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Fw: ATM tube or struts
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM tube or struts
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM homemade Plossls
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Help for designing eyepieces
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM castings/foundry work/patterns
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Tool Material for plate glass
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM camcorder settings
- From: "Chuck Shaw" <cshaw@ghg.net>
- Re: ATM camcorder settings
- From: "Chuck Shaw" <cshaw@ghg.net>
- Re: Re: ATM camcorder settings
- From: "Chuck Shaw" <cshaw@ghg.net>
- Re: ATM Pitch substitutes
- From: "Clint Bach" <clintbach@earthlink.net>
- Re: ATM Wood circle cutting
- From: Clint Bach <clintbach@earthlink.net>
- ATM Re: Folded Gregorian Chant
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM "more normal" scope pix
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM "more normal" scope pix
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM "more normal" scope pix
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Bino pix
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Bino pix
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Bino pix
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM split ring vs CCD
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM cookbook 245 and computer power supply
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM cookbook 245 and computer power supply
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Richest field telescope.
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Richest field telescope.
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM RFT/Pluto and Charon
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM RFT/Pluto and Charon
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Rich Field Scopes: The Hydra!
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM RFT/Pluto and Charon
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Focal plane strobe
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Focal plane strobe
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM binocular scopes
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Optimum tube ID for this combo?
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM binocular scopes
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM binocular scopes
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Binocular Scope
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM tube or struts
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM tube or struts
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM tube or struts
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM bino & focal extenders
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM bino & focal extenders
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM bino & focal extenders
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM tube or struts
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM tube or struts
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM Mersenne derivatives
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Coude Cassegrainian Spider Alignment
- From: "Clive Milne" <milnecd@wantree.com.au>
- Re: ATM Rich Field scopes
- From: "Clive Milne" <milnecd@wantree.com.au>
- ATM (Fwd) Copier Lenses and mirrors
- From: "Craig Perritt" <3GI@dwaf-ntl.kzntl.gov.za>
- Re: ATM (Fwd) Copier Lenses and mirrors
- From: "Craig Perritt" <3GI@dwaf-ntl.kzntl.gov.za>
- Re: ATM film
- From: Craig Utter <utter@channel1.com>
- Re: ATM Black Vitrified Ceramic
- From: Craig Utter <utter@channel1.com>
- Re: ATM my cheap optical find! SKY INSTRUMENTS
- From: Craig Utter <utter@channel1.com>
- ATM RA drive has slop...
- From: "D & D" <d3stars@teleport.com>
- Re: RE: ATM - a 'scope for the classroom
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: ATM Fiber optic eyepiece extension
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: ATM Wheelchair telescope access
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: ATM another attempt at silvering mirror
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: ATM Wheelchair telescope access
- From: Dale Campbell <campbeld@abs-lcms.com>
- ATM Visit with Don Yeier
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: ATM Binocular Scope
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: ATM vs. Daisy coating
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: ATM Modelling diffraction spikes?
- From: Dale Campbell <campbeld@abs-lcms.com>
- Re: ATM New design & Fiberglass question
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM New design & Fiberglass question
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Grinding/Polishing Question
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Making a Pitch Lap
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Making a Pitch Lap
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Adhesives
- From: Daniel Fundo <fundo@bellsouth.net>
- ATM Polishing Teflon (R)
- From: Daniel Fundo <fundo@bellsouth.net>
- Re: SV: ATM tube or struts
- From: Daniel Fundo <fundo@bellsouth.net>
- ATM Hartmann Test
- From: Daniel Kahraman <ishtar66@speedline.ca>
- ATM Digital Setting Circles project update
- From: "Dave Ek" <ekdave@earthlink.net>
- Re: ATM Pictures of a Shiefspiegler
- From: Dave Gault <daveg@tpg.com.au>
- ATM Classical cass collimation
- From: Dave Gill <dpgill@raex.com>
- ATM Cassegrain automation
- From: Dave Gill <dpgill@raex.com>
- Re: ATM aluminium cage design
- From: "Dave Pitou" <dpitou@ix.netcom.com>
- Re: ATM - Windows CE (Palmtop Computers)
- From: darsal@erols.com (Dave Salovesh)
- ATM "more normal" scope pix
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM MacDobs
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM MacDobs
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Laser Collimation
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM What are the min requirements for the CCD Cookbook Camera's PCcontroller?
- From: davebevel@mindspring.com
- ATM Re: White powder
- From: davebevel@mindspring.com
- Re: ATM Wood circle cutting
- From: davebevel@mindspring.com
- Re: ATM books
- From: davebevel@mindspring.com
- Re: ATM software for star testing and foucault
- From: davebevel@mindspring.com
- Re: ATM Making the tool
- From: davebevel@mindspring.com
- ATM software for star testing and foucault
- From: david lewis <lewis@eecg.toronto.edu>
- Re: ATM Scratches during fine grinding
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Polishing a 16" thin mirror
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- Re: ATM Advice on Sourcing a high quality 12.5" cell for a 2" thick flat
- From: David McCarter <mccarterd@claven.fanshawec.on.ca>
- No Subject
- From: "David P. Goldenberg" <goldenberg@biology.utah.edu>
- ATM rubylithe
- From: David Reed <dzreed@mail.rdu.bellsouth.net>
- ATM: fork mount
- From: "david s. white" <dswhite@stic.net>
- ATM Crayford bearing?
- From: "david s. white" <dswhite@stic.net>
- Re: ATM TV projection lenses/any use?
- From: "David Simons" <hmsimons@hotmail.com>
- Re: ATM Fiber optic eyepiece extension
- From: "David Simons" <hmsimons@hotmail.com>
- Re: ATM 8" Achromat
- From: "David Simons" <hmsimons@hotmail.com>
- Re: ATM Fiber optic eyepiece extension
- From: deepsky <deepsky@usmo.com>
- ATM Suppliers
- From: Dennis Ethridge <coffee@tca.net>
- ATM Web site
- From: Dennis Ethridge <coffee@tca.net>
- ATM Thanks
- From: Dennis Ethridge <coffee@tca.net>
- Re: ATM How to remove silicone glue?
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM time estimate for polishing
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM Adhesives
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM cementing glass
- From: Dennis Rech <dennisrech@home.com>
- Re: ATM cores for castings/foundary
- From: Dennis Rech <dennisrech@home.com>
- ATM cookbook 245 and computer power supply
- From: dhalliday@tectrol.com
- Re: ATM Mass of Pyrex?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Mass of Pyrex?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM "more normal" scope pix
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM "more normal" scope pix
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM How to remove silicone glue?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM How to remove silicone glue?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Ion Milling
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Panasonic Printer Motors
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM chemical/physical properties of different mirror materials
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM off-topic - eclipse pics here
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM glue and glass
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM film
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM Al2O3 vs B2O3 vs quartz
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM RFT/Pluto and Charon
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM RFT/Pluto and Charon
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM cookbook 245 and computer power supply
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM RFT/Pluto and Charon
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Seeking the secrets of life or at least mirror polishing
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Modelling diffraction spikes?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Brown Glass
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Stepper motor control
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Ion Milling
- From: Donald Clement <clement@inetworld.net>
- ATM QTVR
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Lowest power for splitting Epsilon Lyrae with a 6"
- From: Donald Clement <clement@inetworld.net>
- Re: ATM here's another pulsar idea...
- From: Donald Clement <clement@inetworld.net>
- Re: ATM Stepper motor control
- From: Donald Clement <clement@inetworld.net>
- Re: ATM epoxy mirrors
- From: "Donn Starkey" <starkey@fwi.com>
- Re: ATM castings/foundry work/patterns
- From: "Donn Starkey" <starkey@fwi.com>
- Re: ATM How to remove silicone glue?
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM Bino pix
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM Advise, please...
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM Scratches during fine grinding
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM Tee Nuts and Berry style Mirror Cell
- From: Donovan Buck <donovan@bravoz.com>
- Re: ATM Making the tool
- From: Donovan Buck <donovan@bravoz.com>
- ATM home pages
- From: Dragan Miladinovic <dragmila@eunet.yu>
- ATM home pages 2.
- From: Dragan Miladinovic <dragmila@eunet.yu>
- Re: ATM RA drive has slop...
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM: fork mount
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM epoxy mirrors
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Ion Milling
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM epoxy mirrors
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Advise, please...
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Advise, please...
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Moving source tester
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Moving source tester
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Wheelchair telescope access
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Tile grinding tool- gaps? & metal tools
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM atm repeats
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM glue and glass
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Rich Field scopes.
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Rich Field scopes.
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Rich Field scopes.
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Focal plane strobe
- From: Dwight Elvey <elvey@hal.com>
- RE: Sources of ATM parts in the Bay area
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Binocular Scope
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Focal plane strobe
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM bino & focal extenders
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Binocular Scope
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Pitch substitutes
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM tube or struts
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM How many zones? - a follow-up
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Mass of Pyrex?
- From: Ed Falk <Ed.Falk@eng.sun.com>
- ATM Re: Saggita
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM Ion Milling
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM A question, if I may
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM Too close to blow it now
- From: Ed Falk <Ed.Falk@eng.sun.com>
- Re: ATM "more normal" scope pix
- From: Edwin Spector <ems@lucent.com>
- ATM cookbook 245 and computer power supply
- From: "Eldereis de Paula" <eldereis@dfm.ffclrp.usp.br>
- Re: ATM cookbook 245 and computer power supply
- From: "Eldereis de Paula" <eldereis@dfm.ffclrp.usp.br>
- ATM Eli's telescope site
- From: Eli Vandevoorde <elivv@efn.org>
- ATM: comments on Eli's site.
- From: Eli Vandevoorde <elivv@efn.org>
- Re: ATM Starting!
- From: Eli Vandevoorde <elivv@efn.org>
- ATM Europe Eclipse
- From: "Fabio Falchi" <falchifa@tin.it>
- ATM Pricey little optic!
- From: "Fearon, Gary" <gary.fearon@wapl.com.au>
- ATM Laps
- From: "Francis Milsom" <francis@milsom07.freeserve.co.uk>
- ATM Newport Mirrors
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Aluminum Oxide
- From: "Frank" <thewards@mindspring.com>
- Re: ATM camcorder settings
- From: "Frank" <thewards@mindspring.com>
- ATM Re: whoops! got any more bearings?
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Re: whoops! got any more bearings?
- From: "Frank" <thewards@mindspring.com>
- ATM Truss tubes
- From: "Frank" <thewards@mindspring.com>
- ATM Re: Truss tubes
- From: "Frank" <thewards@mindspring.com>
- ATM Bearings, bearings, get'cha red hot bearings.
- From: "Frank" <thewards@mindspring.com>
- ATM Field Rotation Bearings
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Grinding/Polishing Question
- From: "Frank" <thewards@mindspring.com>
- Re: ATM copy scope
- From: "Frank" <thewards@mindspring.com>
- ATM 1.83 Secondary
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Rich Field scopes.
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Rich Field scopes.
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Primary to Secondary Distance Calculation
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Tube or struts
- From: "Frank" <thewards@mindspring.com>
- ATM Bearings
- From: "Frank" <thewards@mindspring.com>
- Re: ATM tube or struts
- From: "Frank" <thewards@mindspring.com>
- Re: Dentistry and ATMing
- From: "Frank" <thewards@mindspring.com>
- ATM Video
- From: "Frank" <thewards@mindspring.com>
- Re: ATM making a corrector for SCT
- From: "Frank" <thewards@mindspring.com>
- ATM Table saw circles
- From: "Frank" <thewards@mindspring.com>
- Re: ATM castings/foundry work/patterns
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Help for designing eyepieces
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Suppliers
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM How many zones?
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM Making the tool
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: Dentistry and ATMing
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM Chipping and polishing
- From: Frode Tyholdt <frode.tyholdt@kjemi.uio.no>
- Re: ATM Chipping and polishing
- From: Frode Tyholdt <frode.tyholdt@kjemi.uio.no>
- Re: ATM film
- From: Frode Tyholdt <frode.tyholdt@kjemi.uio.no>
- Re: ATM film
- From: Frode Tyholdt <frode.tyholdt@kjemi.uio.no>
- ATM Carbon fibre + aluminum tube.
- From: Frode Tyholdt <frode.tyholdt@kjemi.uio.no>
- Re: ATM Carbon fibre + aluminum tube.
- From: Frode Tyholdt <frode.tyholdt@kjemi.uio.no>
- Re: ATM Carbon fibre + aluminum tube.
- From: Frode Tyholdt <frode.tyholdt@kjemi.uio.no>
- ATMing in the October Sky & Telescope
- From: Gary Seronik <gseronik@netway.com>
- Re: ATM Teflon sheet from HIX corporation (ref: October Sky & Telescope)
- From: Gary Seronik <gseronik@netway.com>
- Re: ATM camcorder settings
- From: gwoods@albany.net (Gary Woods)
- Re: ATM Dot matrix printhead
- From: gwoods@albany.net (Gary Woods)
- Re: ATM books
- From: gwoods@albany.net (Gary Woods)
- ATM Polishing a 16" thin mirror
- From: "Geoff Dudley" <gdudley@swin.edu.au>
- Re: ATM Polishing a 16" thin mirror
- From: Geoff Dudley <GDudley@swin.edu.au>
- Re: ATM rubylithe
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM Anti-reflection coatings
- From: Gerald Pearson & Sue Sarlette <suegerry@muscanet.com>
- Re: ATM Cassegrain automation
- From: "Gerd F. Herzogenrath" <gfh@fh-furtwangen.de>
- Re: ATM Daisy Finder
- From: Glen Warchol <glenwarchol@sltrib.com>
- ATM vs. Daisy coating
- From: Glen Warchol <glenwarchol@sltrib.com>
- Re: ATM RA drive has slop...
- From: glheiner@pacbell.net
- Re: ATM Solar Telescope Design
- From: glheiner@pacbell.net
- Re: ATM epoxy mirrors
- From: glheiner@pacbell.net
- Re: ATM Cassegrain automation
- From: glheiner@pacbell.net
- Re: ATM epoxy mirrors
- From: glheiner@pacbell.net
- ATM Ion Milling
- From: glheiner@pacbell.net
- Re: ATM epoxy mirrors
- From: glheiner@pacbell.net
- Re: ATM epoxy mirrors
- From: glheiner@pacbell.net
- ATM Test
- From: glheiner@pacbell.net
- Re: ATM Panasonic Printer Motors
- From: glheiner@pacbell.net
- Re: ATM Advise, please...
- From: glheiner@pacbell.net
- ATM Tile grinding tool- gaps? & metal tools
- From: glheiner@pacbell.net
- Re: ATM Glue Pads
- From: glheiner@pacbell.net
- Re: ATM Grinding machine ratios
- From: glheiner@pacbell.net
- Re: ATM Herschelian, was (no subject)
- From: glheiner@pacbell.net
- Re: ATM cookbook 245 and computer power supply
- From: glheiner@pacbell.net
- Re: ATM Grinding machine ratios
- From: glheiner@pacbell.net
- Re: ATM Rich Field scopes.
- From: glheiner@pacbell.net
- Re: ATM Herschelian, was (no subject)
- From: glheiner@pacbell.net
- Re: ATM Grinding machine ratios
- From: glheiner@pacbell.net
- Re: ATM Grinding machine ratios
- From: glheiner@pacbell.net
- Re: ATM binocular scopes
- From: glheiner@pacbell.net
- ATM Anti-reflection coatings
- From: glheiner@pacbell.net
- Re: ATM Modelling diffraction spikes?
- From: glheiner@pacbell.net
- Re: ATM Anti-reflection coatings
- From: glheiner@pacbell.net
- Re: ATM Warming up my Telrad
- From: glheiner@pacbell.net
- Re: ATM RFT/Pluto and Charon
- ATM Tube or struts
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Tube or struts
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATMing in the October Sky & Telescope
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Pitch substitutes
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM tube or struts
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM - a 'scope for the classroom
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM How to remove silicone glue?
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM Sagitta
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM Mirror-making classes
- From: "Guy F. Brandenburg" <guyfbran@erols.com>
- Re: ATM Modelling diffraction spikes?
- From: Hennecke Marcus <Marcus.Hennecke@temic.de>
- ATM (no subject)
- From: "Henry l. Winchester" <henrywin@hgo.net>
- ATM Panasonic Printer Motors
- ATM 3fx
- From: Hermit <klowther@concentric.net>
- Re: ATM 3fx
- From: Hermit <klowther@concentric.net>
- Re: ATM Sagitta
- From: Hermit <klowther@concentric.net>
- Re: ATM Wheelchair telescope access
- From: Hermit <klowther@concentric.net>
- Re: ATM Tile grinding tool- gaps? & metal tools
- From: Hermit <klowther@concentric.net>
- Re: ATM MacDobs
- From: Hermit <klowther@concentric.net>
- Re: ATM Mirror silvering
- From: Hermit <klowther@concentric.net>
- Re: ATM Grinding/Polishing Question
- From: Hermit <klowther@concentric.net>
- Re: ATM Grinding machine ratios
- From: Hermit <klowther@concentric.net>
- Re: ATM Laser Collimation
- From: Hermit <klowther@concentric.net>
- Re: ATM Scratches during fine grinding
- From: Hermit <klowther@concentric.net>
- Re: ATM Scratches during fine grinding
- From: Hermit <klowther@concentric.net>
- Re: ATM Grinding machine ratios
- From: Hermit <klowther@concentric.net>
- Re: ATM Grinding machine ratios
- From: Hermit <klowther@concentric.net>
- Re: ATM important?
- From: Hermit <klowther@concentric.net>
- Re: ATM Quick questions
- From: Hermit <klowther@concentric.net>
- Re: ATM Seeking the secrets of life or at least mirror polishing
- From: Hermit <klowther@concentric.net>
- Re: Dentistry and ATMing
- From: Hermit <klowther@concentric.net>
- Re: ATM here's another pulsar idea...
- From: Hermit <klowther@concentric.net>
- ATM Oscope
- From: Hermit <klowther@concentric.net>
- Re: ATM Focal plane strobe
- From: "Howard Banich" <hbanich@teleport.com>
- Re: ATM Ross null-test
- From: "Howard Banich" <hbanich@teleport.com>
- ATM Vacation
- From: Howard Clausing <hclaus@clausing.com>
- ATM Couder postscript files - help
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- ATM Moving source tester
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- ATM Pitch scouring vs figuring
- From: "Hugh J. Masterson" <mastersonh@dcu.ie>
- ATM OT: AAS/AIAA conf.
- From: Hugues_Laroche@ses-astra.com
- Re: ATM epoxy mirrors
- From: Hugues_Laroche@ses-astra.com
- ATM Coronograph
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Scratches during fine grinding
- From: Hugues_Laroche@ses-astra.com
- ATM OT: GPS rollover
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Making the tool
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Tool bottom-flatness
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Too close to blow it now
- From: Hugues_Laroche@ses-astra.com
- Re: ATM RA drive has slop...
- From: iss@pvtnetworks.net
- Re: ATM RA drive has slop...
- From: iss@pvtnetworks.net
- Re: AW: ATM TV projection lenses/any use?
- From: iss@pvtnetworks.net
- Re: ATM Adhesives
- From: iss@pvtnetworks.net
- Re: ATM Focal plane strobe
- From: iss@pvtnetworks.net
- RE: ATM Tube currents?
- From: iss@pvtnetworks.net
- Re: ATM RFT References Sought
- From: iss@pvtnetworks.net
- Re: ATM Gear ratio of reduction gear in the byers starmaster drive
- From: iss@pvtnetworks.net
- Re: ATM silly questions
- From: iss@pvtnetworks.net
- Re: ATM silly questions
- From: iss@pvtnetworks.net
- Re: ATM Stepper motor control
- From: iss@pvtnetworks.net
- ATM Advice on Sourcing a high quality 12.5" cell for a 2" thick flat
- From: "J. Christopher Westland" <westland@ust.hk>
- ATM Test
- Re: ATM "more normal" scope pix
- From: "James O'Malley" <omalleyj@eclipse.net>
- RE: ATM - a 'scope for the classroom
- From: "James O'Malley" <omalleyj@eclipse.net>
- Re: ATM (no subject)
- From: "James O'Malley" <omalleyj@eclipse.net>
- Re: ATM Herschelian, was (no subject)
- From: "James O'Malley" <omalleyj@eclipse.net>
- Re: ATM Herschelian, was (no subject)
- From: "James O'Malley" <omalleyj@eclipse.net>
- Re: ATM tube or struts
- From: "James O'Malley" <omalleyj@eclipse.net>
- Re: ATM tube or struts
- From: "James O'Malley" <omalleyj@eclipse.net>
- ATM Sattelite tracking
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM re; Telerad dewheater
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM Re; Mold cores
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM Tee Nuts and Berry style Mirror Cell
- From: "James Reid" <jimsci@bellsouth.net>
- Re: ATM Moving source tester
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Lowest power for splitting Epsilon Lyrae with a 6"
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Ritchey-Chrétien
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM How many zones?
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Too close to blow it now
- From: "James W. Burrows" <burrjaw@halcyon.com>
- ATM Waineo null test
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- Re: ATM glue and glass
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- ATM epoxy mirrors
- From: Jeremy Palmer <w6cwj@earthlink.net>
- Re: ATM Cradle
- From: Jeremy Palmer <w6cwj@earthlink.net>
- ATM chandra
- From: Jeremy Palmer <w6cwj@earthlink.net>
- ATM monster eye mirrors
- From: Jerremy Baterson <jdbaterson@usa.net>
- ATM Monster Eye endreply
- From: Jerremy Baterson <jdbaterson@usa.net>
- ATM Sagitta
- From: jdo348@airmail.net (Jerry Dove)
- ATM RE:Sagitta
- From: jdo348@airmail.net (Jerry Dove)
- Re: ATM RE:Sagitta
- From: jdo348@airmail.net (Jerry Dove)
- ATM Rough Grinding
- From: jdo348@airmail.net (Jerry Dove)
- ATM Adhesives
- From: jdo348@airmail.net (Jerry Dove)
- Re: ATM Wood circle cutting
- From: jdo348@airmail.net (Jerry Dove)
- Re: ATM Tile grinding tool- gaps? & metal tools
- From: jdo348@airmail.net (Jerry Dove)
- ATM Multiple post
- From: jdo348@airmail.net (Jerry Dove)
- Re: ATM Grinding machine ratios
- From: jdo348@airmail.net (Jerry Dove)
- Re: ATM Tube Holder
- From: jdo348@airmail.net (Jerry Dove)
- Re: ATM Scratches during fine grinding
- From: jdo348@airmail.net (Jerry Dove)
- Re: ATM rubylithe
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM Determining focuser placement
- From: "Jim Fly" <flyj@iol-12.net>
- ATM Un-cementing Prisms
- From: "Jim Sapp" <stars@integrityonline.com>
- ATM time estimate for polishing
- From: "Jim Warner" <warners@bgcc.com>
- ATM cas. secondary holders
- From: "Jim Warner" <warners@bgcc.com>
- ATM Seeking the secrets of life or at least mirror polishing
- From: "Jim Warner" <warners@bgcc.com>
- ATM Seeking the secrets of life or at least mirror polishing
- From: "Jim Warner" <warners@bgcc.com>
- ATM Rubber maid observatory
- From: "Jim Warner" <warners@bgcc.com>
- ATM Grinding backs of mirrors
- From: Jimmy LaFountain <lafountainj@sprintmail.com>
- ATM Teflon, Beral Coating and MagicGliders
- From: Jimmy LaFountain <lafountainj@sprintmail.com>
- ATM Daisy Sight
- From: Jimmy LaFountain <lafountainj@sprintmail.com>
- ATM James Nasmyth
- From: Jmkasunich@ra.rockwell.com
- Re: ATM Stepper motor control
- From: Jmkasunich@ra.rockwell.com
- Re: ATM Really, really turned?!
- From: JoAnn Nanof <jnanof@javanet.com>
- Re: ATM New Pics - New Scope
- From: JoAnn Nanof <jnanof@javanet.com>
- Re: ATM Glue Pads
- From: Joe campbell <joe@esper.com>
- Re: ATM stepper motor?
- From: "Joe Goins" <jgoins@cedex.com>
- Re: ATM Daisy Finder-Removing coating
- From: "Joe Goins" <jgoins@cedex.com>
- Re: ATM (Fwd) Copier Lenses and mirrors
- From: "johan" <johan@feronyl.com>
- Re: ATM Better solar filter material
- From: Johan Vanbeselaere <jvb@digilife.be>
- Re: ATM Tee Nuts and Berry style Mirror Cell
- From: John.D.Gallagher@Hitchcock.ORG (John D. Gallagher)
- Re: ATM OSLO question ...
- From: "John D. Upton" <upton@austin.ibm.com>
- Re: ATM here's another pulsar idea...
- From: John Price <jmprice@cbvcp.com>
- Re: ATM Making the tool
- From: John Veazey <veazey@ridgenet.net>
- ATM (no subject)
- From: joseph dalessandro <jdman@magpage.com>
- [Fwd: ATM chemical/physical properties of different mirror materials]
- From: jroweapp@swbell.net
- Re: ATM Celestron plossl's
- From: jroweapp@swbell.net
- Re: ATM Celestron plossl's
- From: jroweapp@swbell.net
- Re: ATM Porthole Glass
- From: jroweapp@swbell.net
- ATM Is TheSky in stock any where ?
- From: jherrero@inexpress.net (Juan Herrero)
- Re: ATM my cheap optical find! SKY INSTRUMENTS
- From: jherrero@inexpress.net (Juan Herrero)
- ATM help upgrading slewing scope to GOTO capability
- From: jherrero@inexpress.net (Juan Herrero)
- Re: ATM here's another pulsar idea...
- From: jherrero@inexpress.net (Juan Herrero)
- Re: ATM stepper motor controller
- From: jherrero@inexpress.net (Juan Herrero)
- ATM lost url
- From: "k.honders" <k.honders@worldonline.nl>
- ATM Ross null-test
- From: "k.honders" <k.honders@worldonline.nl>
- Re: ATM Ross null-test
- From: "k.honders" <k.honders@worldonline.nl>
- ATM glue and glass
- From: karen vanderhule <nitesite@lgcy.com>
- ATM cementing glass
- From: karen vanderhule <nitesite@lgcy.com>
- Re: ATM Moving source tester
- Re: ATM Moving source tester
- Re: ATM Mirror silvering
- ATM Very thin mirrors
- Re: ATM A question, if I may?
- ATM Brown Glass
- Re: Re: ATM here's another pulsar idea...
- Re: Re: ATM here's another pulsar idea...
- ATM Aluminum Oxide
- From: Ken Hunter <kb7h@cei.net>
- Re: ATM Panasonic Printer Motors
- From: Ken Hunter <kb7h@cei.net>
- Re: ATM Glue Pads
- From: Ken Hunter <kb7h@cei.net>
- Re: ATM A question, if I may?
- From: Ken Hunter <kb7h@cei.net>
- Re: ATM copy scope
- From: Ken Hunter <kb7h@cei.net>
- Re: ATM Scratches during fine grinding
- From: Ken Hunter <kb7h@cei.net>
- Re: ATM Pitch scouring vs figuring
- From: Ken Hunter <kb7h@cei.net>
- Re: ATM cookbook 245 and computer power supply
- From: Ken Hunter <kb7h@cei.net>
- Re: ATM Too close to blow it now
- From: Ken Hunter <kb7h@cei.net>
- Re: ATM What are the min requirements for the CCD Cookbook Camera's PCcontroller?
- From: Kent Cheatham <cheatham@ionet.net>
- ATM Howdy to Clive and ya'll
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM "more normal" scope
- From: Kent Cheatham <cheatham@ionet.net>
- ATM camcorder settings
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM "more normal" scope pix
- From: Kent Cheatham <cheatham@ionet.net>
- ATM Temp of mirror when set....
- From: Kent Cheatham <cheatham@ionet.net>
- ATM split ring vs CCD
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM Tube or struts
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM 12.5" binocular telescope
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM binocular scopes& focal extenders
- From: Kent Cheatham <cheatham@ionet.net>
- Re: ATM bino & focal extenders
- From: Kent Cheatham <cheatham@ionet.net>
- ATM Too close to blow it now
- From: Kozmic Kid <howdy@compuserve.com>
- ATM refractor focuser/recommendations?
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM plossl design??
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM plossl design??
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM TV projection lenses/any use?
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM TV projection lenses./Star party
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM Wood circle cutting
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM 8" Achromat
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM Richest field telescope.
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM RFT/Pluto and Charon
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM RFT/Pluto and Charon
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATMing in the October Sky & Telescope
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM castings/foundry work/patterns
- From: "Kreig McBride" <kmcbride@memes.com>
- ATM cores for castings/foundary
- From: "Kreig McBride" <kmcbride@memes.com>
- Re: ATM blanks from Newport Glass Works
- From: CELEBRON@gte.net (Larry Blair)
- ATM Optimum tube ID for this combo?
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: SV: ATM Optimum tube ID for this combo?
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Help for designing eyepieces
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM Help for designing eyepieces
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM Help for designing eyepieces
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM copy scope
- From: les <lesh@frii.com>
- Re: ATM blanks from Newport Glass Works
- From: lesh <lesh@frii.com>
- ATM standard handbook for telescope making
- From: lesh <lesh@frii.com>
- ATM copy scope
- From: lesh <lesh@frii.com>
- Re: ATM RFT/Pluto and Charon
- From: lesh <lesh@frii.com>
- Re: ATM tube or struts
- From: lesh <lesh@frii.com>
- Re: ATM vs. Daisy coating
- From: lesh <lesh@frii.com>
- Re: ATM cores for castings/foundary
- From: lesh <lesh@frii.com>
- Re: ATM: comments on Eli's site.
- From: "luis garcia" <igusus@hotmail.com>
- DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
- From: Mail System Internal Data <MAILER-DAEMON@system.umsystem.edu>
- Re: ATM Pitch substitutes
- From: Malcolm Macdonald <toliman@wave.co.nz>
- Re: ATM here's another pulsar idea...
- From: Malcolm Macdonald <toliman@wave.co.nz>
- Re: ATM here's another pulsar idea...
- From: Malcolm Macdonald <toliman@wave.co.nz>
- Re: ATM A question, if I may?
- From: "Marinus A. (Rien) van der Lugt" <rienvdlugt@cistron.nl>
- ATM 27 Point mirror support
- From: "Marinus A. (Rien) van der Lugt" <rienvdlugt@cistron.nl>
- Re: ATM RA drive has slop (long)...
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- Re: ATM cookbook 245 and computer power supply
- From: "Mark Alsing" <malsing@borg.ae.usr.com>
- ATM How much Grit?
- From: tyr2490@tyler.net (Mark Migura)
- Re: ATM Rich Field scopes
- From: "Mark St.George" <sanjo@execulink.com>
- ATM Yolo figureing
- From: "Mark Yama" <myama@novell.uidaho.edu>
- ATM Telescope Optics Workshop advance notice for 2000
- ATM electric toothbrush cleans tile tools
- Dentistry and ATMing
- ATM Modelling diffraction spikes?
- ATM OSLO question ...
- From: "Matt Considine" <mconsidine@mail.wesleyan.edu>
- Re: ATM: fork mount
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Cassegrain automation
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM - Windows CE (Palmtop Computers)
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Scratches during fine grinding
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Richest field telescope.
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Herschelian, was (no subject)
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM What kind of pitch & abrasives
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Polishing Nickel
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM RFT References Sought
- From: Mel Bartels <mbartels@efn.org>
- ATM Re: To Mel - Cookbook and Computer Control
- From: Mel Bartels <mbartels@efn.org>
- ATM [Fwd: Calulations for mirrors]
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Too close to blow it now
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Stepper motor control
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM Porthole Glass
- From: Mel Bartels <mbartels@efn.org>
- Re: ATM "more normal" scope pix
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM "more normal" scope pix
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Newport Mirrors
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Grinding backs of mirrors
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Is the edge still turned?
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Daisy Finder
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Daisy Finder
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Tile grinding tool- gaps? & metal tools
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Tile grinding tool- gaps? & metal tools
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Black Vitrified Ceramic
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Hold Downs
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM A question, if I may?
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Making a Pitch Lap
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Making a Pitch Lap
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Scratches during fine grinding
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Tube or struts
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM tube or struts
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Polishing Teflon (R)
- From: Michael Coslo <mjc5@psu.edu>
- RE: ATM Daisy Finder-Removing coating
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Dental Stone
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Pitch substitutes
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM vs. Daisy coating
- From: Michael Coslo <mjc5@psu.edu>
- ATM Warming up my Telrad
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Brown Glass: Budweiserscope
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Too close to blow it now
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Too close to blow it now
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM "more normal" scope pix
- From: Michael Davis <mdavis19@ix.netcom.com>
- Re: ATM "more normal" scope pix
- From: Michael Davis <mdavis19@ix.netcom.com>
- Re: ATM Woodshop Telescope plans
- From: Michael Lindner <mikel@att.net>
- Re: ATM classes on the East Coast?
- From: Michael Lindner <mikel@att.net>
- Re: Nice Cradle: was ATM classes on the East Coast?
- From: Michael Lindner <mikel@att.net>
- Re: ATM starting atm
- From: Michael Lindner <mikel@att.net>
- ATM Archives and parentheses
- From: Michael Lindner <mikel@att.net>
- Re: ATM How to remove silicone glue?
- From: Michael Lindner <mikel@att.net>
- Re: ATM Fiber optic eyepiece extension
- From: Michael Lindner <mikel@att.net>
- Re: ATM "more normal" scope pix
- From: Michael Lindner <mikel@att.net>
- Re: ATM
- From: Michael Lindner <mikel@att.net>
- Re: ATM
- From: Michael Lindner <mikel@att.net>
- Re: ATM Wood circle cutting
- From: Michael Lindner <mikel@att.net>
- Re: ATM Couder postscript files - help
- From: Michael Lindner <mikel@att.net>
- Re: ATM Moving source tester
- From: Michael Lindner <mikel@att.net>
- Re: ATM Wheelchair telescope access
- From: Michael Lindner <mikel@att.net>
- Re: ATM Lowest power for splitting Epsilon Lyrae
- From: Michael Lindner <mikel@att.net>
- Re: ATM Black Vitrified Ceramic
- From: Michael Lindner <mikel@att.net>
- Re: ATM another attempt at silvering mirror
- From: Michael Lindner <mikel@att.net>
- Re: ATM Teflon, Beral Coating and MagicGliders
- From: Michael Lindner <mikel@att.net>
- Re: ATM mirror
- From: Michael Lindner <mikel@att.net>
- Re: ATM mirror
- From: Michael Lindner <mikel@att.net>
- Re: ATM books
- From: Michael Lindner <mikel@att.net>
- Re: ATM Celestron plossl's
- From: Michael Lindner <mikel@att.net>
- Re: ATM New ( ? ) telescope design
- From: Michael Pankratz <papilio1@juno.com>
- Re: ATM Focal plane strobe
- From: Michael Pankratz <papilio1@juno.com>
- Re: ATM Rich Field scopes.
- From: Michael Pankratz <papilio1@juno.com>
- ATM Porthole Glass
- From: Michael Pankratz <papilio1@juno.com>
- ATM Re: Folded Gregorian Chant
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM R-C questions
- From: Michael Peck <mpeck1@ix.netcom.com>
- ATM position measurement
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM stepper motor controller
- From: spooner@page.az.net (Michael Spooner)
- ATM Pitch substitutes
- From: "Mick & Sal" <clements@cairns.net.au>
- Nice Cradle: was ATM classes on the East Coast?
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Decementing Achromats (was silicone glue)
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM film
- From: Mike Coslo <mjc5@psu.edu>
- ATM another attempt at silvering mirror
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Desert
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Making the tool
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Polishing Teflon (R)
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Tube or struts
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Daisy Finder-Removing coating
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM Pitch substitutes
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM castings/foundry work/patterns
- From: Mike Coslo <mjc5@psu.edu>
- Re: ATM MR eyepieces
- From: "Mike Marchand" <bmarchan@mnsi.net>
- Re: ATM Active mirror figure correction?
- From: "Mike Marchand" <bmarchan@mnsi.net>
- Re: ATM Mass of Pyrex?
- From: Mike Reed <mreed@eai.com>
- Re: ATM Daisy Finder
- From: Mike Reed <mreed@eai.com>
- Re: ATMing in the October Sky & Telescope
- From: Mike Reed <mreed@eai.com>
- Re: ATM Mirror silvering
- Re: ATM Tee Nuts and Berry style Mirror Cell
- ATM Base died
- Re: ATM Un-cementing Prisms
- From: more than meets the eye <meeteye@yahoo.com>
- ATM How to remove silicone glue?
- ATM Caustic Tester
- From: CNDW30A@prodigy.com (MR WILBER W BANDEMER)
- ATM Caustic Tester
- From: CNDW30A@prodigy.com (MR WILBER W BANDEMER)
- ATM Computer
- From: CNDW30A@prodigy.com (MR WILBER W BANDEMER)
- Re: ATM epoxy mirrors
- Re: ATM here's another pulsar idea...
- RE: ATM - a 'scope for the classroom
- Re: ATM How to remove silicone glue?
- Re: ATM Daisy Finder
- Re: ATM epoxy mirrors
- From: Nick Martin <bonnyton@ednet.co.uk>
- Re: ATM Re Sonotube in the UK
- From: Nick Martin <bonnyton@ednet.co.uk>
- Re: ATM Night Vision - Of Toads And Man
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Laser Collimation
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM How many zones?
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Optimum tube ID for this combo?
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Anti-reflection coatings
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM tube or struts
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Optimum tube ID for this combo?
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATMing in the October Sky & Telescope
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM How many zones? - a follow-up
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM tube or struts
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Modelling diffraction spikes?
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM How many zones? - errata
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- ATM dictionary (new update)
- From: Olivier Biot <olivier@zeus.rug.ac.be>
- ATM mirror cell resources on teh net?
- From: Olivier Biot <olivier@zeus.rug.ac.be>
- Re: ATM Modelling diffraction spikes?
- From: Olivier Guyon <oguyon@clipper.ens.fr>
- Re: ATM Modelling diffraction spikes?
- From: Olivier Guyon <oguyon@clipper.ens.fr>
- Re: ATM my cheap optical find! SKY INSTRUMENTS
- From: "P. Malone" <patmalone@earthlink.net>
- ATM Please email OSLO files to me...
- From: "P.K. Ferrick" <ferrick@zebulon.telenet.net>
- ATM OSLO files for Stellafane
- From: "P.K. Ferrick" <ferrick@zebulon.telenet.net>
- ATM here's another pulsar idea...
- From: "P.K. Ferrick" <ferrick@zebulon.telenet.net>
- RE: ATM My 10" Dob completed
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM "more normal" scope pix
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM Lowest power for splitting Epsilon Lyrae with a 6"
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM Glue Pads
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM Teflon, Beral Coating and MagicGliders
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM another attempt at silvering mirror
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM film
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM - Windows CE (Palmtop Computers)
- From: Paul LeFevre <paull@lucasarts.com>
- RE: Sources of ATM parts in the Bay area
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM tube or struts
- From: Paul LeFevre <paull@lucasarts.com>
- RE: ATM tube or struts
- From: Paul LeFevre <paull@lucasarts.com>
- ATM Re: atm-digest V1 #1761
- From: Paul Shankland <pshankland@flakeysol.com>
- ATM Inverted Fork Mount
- From: "Peach" <glea@sover.net>
- ATM just like glass ashtrays but better
- From: Pete Koziar <Pete_Koziar@compuserve.com>
- ATM Progress on 5 incher OTA
- From: Pete Koziar <Pete_Koziar@compuserve.com>
- ATM reply: Frank Sczcepanski Binocs
- From: Peter Abrahams <telscope@europa.com>
- ATM epoxy mirrors
- From: Peter C Chen <chen@stars.gsfc.nasa.gov>
- ATM Dot matrix printhead
- From: Peter C Chen <chen@stars.gsfc.nasa.gov>
- Re: ATM rubylithe
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM How to remove silicone glue?
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- ATM: re silicone glue removal
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM cookbook 245 and computer power supply
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Monster Eye endreply
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Stepper Motor?
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM here's another pulsar idea...
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM castings/foundry work/patterns
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM cores for castings/foundary
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM cores for castings/foundary
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM here's another pulsar idea...
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM plossl design??
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM plossl design??
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM How to remove silicone glue?
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- ATM Decementing Achromats (was silicone glue)
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM Pitch substitutes
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- Re: ATM Help for designing eyepieces
- From: "PETER JOHN SMITH" <pjifl@bigpond.com>
- ATM MacDobs
- From: Petr Malon <malon@marilyn.uochb.cas.cz>
- Re: ATM (Fwd) Copier Lenses and mirrors
- From: "Phillip Smith" <hapchap@bigpond.com>
- ATM MR eyepieces
- From: "Phillip Smith" <hapchap@bigpond.com>
- ATM binocular scopes
- From: "Phillip Smith" <hapchap@bigpond.com>
- ATM Scratches during fine grinding
- From: "Poul Linnet" <kam1842@vip.cybercity.dk>
- Re: ATM Grinding/Polishing Question
- From: "Poul Linnet" <kam1842@vip.cybercity.dk>
- Re: ATM Scratches during fine grinding
- From: "Poul Linnet" <kam1842@vip.cybercity.dk>
- RE: ATM vs. Daisy coating
- From: Randy Johnson <RJohnson@radarinc.com>
- ATM (no subject)
- From: Reed Alan Spaulding <shellac@together.net>
- Re: ATM time estimate for polishing
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Re: Unusual Mirror Materials
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM RFT References Sought
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Pitch substitutes
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- ATM :Hartman software "free"
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Help for designing eyepieces
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Moving source tester
- From: Ricardo Dunna <rdunna@infolink.com.br>
- Re: ATM Moving source tester
- From: Ricardo Dunna <rdunna@infolink.com.br>
- ATM Using polishing machines as turntable only
- From: Ricardo Dunna <rdunna@infolink.com.br>
- ATM C5+
- From: riccardo ballerini <riballe@tiscalinet.it>
- Re: ATM "more normal" scope pix
- From: "Richard Rovelstad" <Richard.Rovelstad@worldnet.att.net>
- Re: ATM Lowest power for splitting Epsilon Lyrae
- From: Richard Schwartz <richas@idt.net>
- ATM Re: Unusual Mirror Materials
- From: Richard Schwartz <richas@idt.net>
- ATM What are the min requirements for the CCD Cookbook Camera's PCcontroller?
- ATM Mounts and drives....
- From: "Rob Simmons" <biofish@cdc.net>
- ATM Broken Tighting Pin
- From: "Rob Simmons" <biofish@cdc.net>
- ATM Re: atm-digest V1 #1748
- From: "Rob Simmons" <biofish@cdc.net>
- ATM my cheap optical find! SKY INSTRUMENTS
- From: "Rob Simmons" <biofish@cdc.net>
- ATM my great optical find. SKY INSTRUMENTS
- From: "Rob Simmons" <biofish@cdc.net>
- ATM Motor control
- From: "Rob Simmons" <biofish@cdc.net>
- Re: Nice Cradle: was ATM classes on the East Coast?
- From: Rob Teeter <webuser@thecore.com>
- ATM Stellafane Plate
- From: Rob Teeter <webuser@thecore.com>
- Re: ATM Tube Holder
- From: Rob Teeter <webuser@thecore.com>
- ATM Copyscope Completion
- From: Rob Teeter <webuser@thecore.com>
- ATM Yolo Figuring
- From: Rod Brackenridge <rjb@netconnect.com.au>
- Re: ATM Using polishing machines as turntable only
- From: Rod Brackenridge <rjb@netconnect.com.au>
- Re: ATM How to remove silicone glue?
- From: "Roger A. Phillips" <mailman@localline.com>
- Re: ATM Wheelchair telescope access
- From: "Roger A. Phillips" <mailman@localline.com>
- ATM Chuck Hard's home-made "Buena Vista" Plossl Eyepieces
- From: "Roger A. Phillips" <mailman@localline.com>
- ATM Chuck Hard's home-made "Buena Vista" Plossl Eyepieces
- From: "Roger A. Phillips" <mailman@localline.com>
- ATM 24" NASA Cass
- From: "Roger A. Phillips" <mailman@localline.com>
- Re: ATM Panasonic Printer Motors
- From: Roger Groom <rog@omen.com.au>
- ATM Solar Telescope Design
- From: "Roger Herzler" <rherzler@cts.com>
- ATM classes on the East Coast?
- From: "Roger Herzler" <rherzler@cts.com>
- Re: ATM epoxy mirrors
- From: "Roger Herzler" <rherzler@cts.com>
- Re: ATM Tile grinding tool- gaps? & metal tools
- From: "Roger Herzler" <rherzler@cts.com>
- RE: ATM Daisy Finder
- From: "Rovelstad, Peder" <Peder.Rovelstad@standardregister.com>
- ATM Tube currents?
- From: "Rovelstad, Peder" <Peder.Rovelstad@standardregister.com>
- AW: ATM Copier Lenses and mirrors
- From: "Royston, Jeremy" <jroyston@europe.dg.com>
- AW: ATM TV projection lenses/any use?
- From: "Royston, Jeremy" <jroyston@europe.dg.com>
- AW: ATM Coronograph
- From: "Royston, Jeremy" <jroyston@europe.dg.com>
- ATM Removing Silicone rubber safely
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM Removing Silicone rubber safely
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM Grinding machine ratios
- From: "Sam Michael" <samm@idcomm.com>
- Re: ATM Grinding machine ratios
- From: "Sam Michael" <samm@idcomm.com>
- ATM Mass of Pyrex?
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Mass of Pyrex?
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Mass of Pyrex?
- From: ScifiGuy <scifiguy@pacbell.net>
- ATM Need Source Recommendation for Matched 6" f/4-f/5 Achromats
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM stepper motor controller
- From: ScifiGuy <scifiguy@pacbell.net>
- Re: ATM Warming up my Telrad
- From: scott.barrie@cimtegration.com (Scott Barrie)
- ATM Odd piece of glass to identify
- From: "Scott Marsh" <smarsh@geocities.com>
- Re: ATM How to remove silicone glue?
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM How to remove silicone glue?
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- ATM Daisy Finder
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATMing in the October Sky & Telescope
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- ATM : Checking DSC accuracy via skymap
- From: "Shahrin Ahmad" <shahgazer@iname.com>
- RE: ATM - a 'scope for the classroom
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- Re: ATM rubylithe
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- Re: ATM I did it!
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- ATM New scope
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- ATM Frank Sczcepanski Binocs
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- Re: ATM reply: Frank Sczcepanski Binocs
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- ATM New Pics - New Scope
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- Re: ATM New Pics - New Scope
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- ATM CCD & Alt-Az Drive System Question
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- ATM To Mel - Cookbook and Computer Control
- From: Shane_Lapierre@aici.com (Shane Lapierre)
- Re: ATM classes on the East Coast?
- From: Shannon Hughes <sr.hughes@worldnet.att.net>
- ATM RE: Odd Glass, SN38
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM Aluminum Oxide
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM Grinding/Polishing Question
- From: "Sidor . Kurt" <KSidor@drc.com>
- Re: ATM classes on the East Coast?
- From: "Slater, Ken" <Ken.Slater@compaq.com>
- ATM glue
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Testing Temps
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Off Topic
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Glue Pads
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Desert
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Hold Downs
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM A question, if I may?
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Forward Messages
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Tube Holder
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Off Topic:Borax
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Need Updating
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Guy need Help
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM 8in project report
- From: starlord@qnet.com (Slc.Dennis Bishop)
- ATM Re: [Astronomy-net] Astronomy Net List Check In
- From: starlord@qnet.com (Slc.Dennis Bishop)
- Re: ATM Re: whoops! got any more bearings?
- From: "Spencer Roedder" <roedder@roedder.com>
- Re: ATM Fiber optic eyepiece extension
- From: Spencer Roedder <roedder@roedder.com>
- ATM [Fwd: ADMIN COMMENT: ASTRO is down -- do not post u]
- From: spinney@pwshift.com
- ATM [Fwd: ADMIN COMMENT: ASTRO is down -- do not post u]
- From: spinney@pwshift.com
- Re: ATM Web site
- From: spinney@pwshift.com
- ATM Archives update for July 99
- From: "Steere, Andy" <SteereL@umsystem.edu>
- ATM FW: TELESCOPE CONSTRUCTION
- From: "Steere, Andy" <SteereL@umsystem.edu>
- ATM Re: atm-digest V1 #1761
- From: Stephen Russell <smr@cse.unsw.edu.au>
- Re: ATM "more normal" scope pix
- From: Stephen Vegos <yovw@cdsnet.net>
- Re: ATM "more normal" scope pix
- From: Stephen Vegos <yovw@cdsnet.net>
- Re: ATM Eli's telescope site
- From: Stephen Vegos <yovw@cdsnet.net>
- Re: ATM Rough Grinding
- Re: ATM Telescope redesign
- Re: ATM rubylithe
- Re: ATM "Buena Vista" home-made Plossls- Report -
- Re: ATM Moving source tester
- Re: ATM Scratches during fine grinding
- ATM RFT Objective Lenses: error in URL
- Re: ATM Pictures of a Shiefspiegler (Dall-Kirkham)
- Re: ATM Pictures of a Dall-Kirkham
- Re: ATM SDI Mirror
- From: Steve Schear <schear@lvcm.com>
- Re: ATM Loaded questions about mirror cells
- From: Steve Schear <schear@lvcm.com>
- Re: ATM epoxy mirrors
- From: Steve Schear <schear@lvcm.com>
- Re: ATM epoxy mirrors
- From: Steve Schear <schear@lvcm.com>
- Re: ATM epoxy mirrors
- From: Steve Schear <schear@lvcm.com>
- Re: ATM epoxy mirrors
- From: Steve Schear <schear@lvcm.com>
- Re: ATM Pitch substitutes & TV News Story
- From: "Steve Thompson" <sjt@ewt.com>
- ATM Determining focuser placement
- From: Talbert Malone <TM85010@UAFSYSB.UARK.EDU>
- ATM Upgrading GM8 mount with Byers gear
- From: "Tan Wei Leong" <weileong@singnet.com.sg>
- ATM Upgrading GM8 mount with Byers gear
- From: "Tan Wei Leong" <weileong@singnet.com.sg>
- ATM Gear ratio of reduction gear in the byers starmaster drive
- From: "Tan Wei Leong" <weileong@singnet.com.sg>
- Re: ATM Wood circle cutting
- From: Terrance G Bondy <bondys@netrover.com>
- ATM Celestron plossl's
- From: "The Lowry's" <wayne_rebecca@iname.com>
- ATM Celestron plossl's
- From: "The Lowry's" <wayne_rebecca@iname.com>
- ATM Mirror silvering
- From: "The Lowry's" <wayne_rebecca@iname.com>
- ATM binocular scopes
- From: "The Lowry's" <wayne_rebecca@iname.com>
- ATM Binocular Scope
- From: "The Lowry's" <wayne_rebecca@iname.com>
- ATM Binocular Scope
- From: "The Lowry's" <wayne_rebecca@iname.com>
- ATM silly questions
- From: "The Lowry's" <wayne_rebecca@iname.com>
- Re: ATM silly questions
- From: "The Lowry's" <wayne_rebecca@iname.com>
- Re: ATM New ( ? ) telescope design
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM RA drive has slop...
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM epoxy mirrors
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM epoxy mirrors
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM How to remove silicone glue?
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM epoxy mirrors
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM How much Grit?
- From: The Silent Observer <silent1@ix.netcom.com>
- ATM Is the edge still turned?
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Is the edge still turned?
- From: The Silent Observer <silent1@ix.netcom.com>
- ATM Really, really turned?!
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Tile grinding tool- gaps? & metal tools
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Lowest power for splitting Epsilon Lyrae
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM books
- From: The Silent Observer <silent1@ix.netcom.com>
- ATM It's done -- I think.
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Motor control
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Seeking the secrets of life or at least mirror polishing
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Tool bottom-flatness
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: Dentistry and ATMing
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Sizes
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM How Bad?
- From: The Silent Observer <silent1@ix.netcom.com>
- ATM Sizes
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- ATM How Bad?
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- Re: ATM Bino pix
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Book Now In Paperback!
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Seeking Info on Concentric Schmidts
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Seeking Info on Concentric Schmidts
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Seeking Info on Concentric Schmidts
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Seeking Info on Concentric Schmidts
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- Tonkin's [ed.] ATM Book Compared to Kriege's
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Rich Field scopes.
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM OT: Stunning Photo: Eclipse From Mir
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM OT: Stunning Photo: Eclipse From Mir
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- Re: ATM Rich Field scopes.
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Rich Field Scopes: The Hydra!
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM RFT References Sought
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM RFT References Sought
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- Re: ATM RFT References Sought
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Brown Glass: Budweiserscope
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Sources of RFT Objective Lenses
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Help for designing eyepieces
- From: "Thomas O'Hara PhD" <thomasohara@yahoo.com>
- ATM Pitch substitutes & TV News Story
- ATM Blanks
- From: Tim Walters <trwalters@mindspring.com>
- Re: ATM Lowest power for splitting Epsilon Lyrae with a 6"
- From: "Todd C. Stevens" <todd@airnet.net>
- ATM aluminium cage design
- ATM Stepper Motor?
- ATM stepper motor?
- ATM:CCD focal plane
- Re: ATM Caustic Tester
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM refractor focuser/recommendations?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM - a 'scope for the classroom
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Fiber optic eyepiece extension
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM glue
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Better solar filter material
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Lowest power for splitting Epsilon Lyrae
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM How many zones?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Tube or struts
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Teflon sheet from HIX corporation (ref: October Sky & Telescope)
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Chuck's projects on the Web
- From: "Tomas Maruska" <maruska@posam.sk>
- Re: ATM Guy need Help
- From: "Tomas Maruska" <maruska@posam.sk>
- ATM film
- From: "Tony Dunlap" <banjo2@bright.net>
- ATM Perseids
- From: "Tony Dunlap" <banjo2@bright.net>
- ATM atm perseids
- From: "Tony Dunlap" <banjo2@bright.net>
- ATM atm repeats
- From: "Tony Dunlap" <banjo2@bright.net>
- ATM Cradle
- From: "Tony Dunlap" <banjo2@bright.net>
- ATM Wheelchair telescope access
- From: "Vero and Lisa Joseph" <joseph@interact.net.au>
- Re: ATM Wheelchair telescope access
- From: "Vero and Lisa Joseph" <joseph@interact.net.au>
- ATM Fiber optic eyepiece extension
- From: "Victor Lange" <victor@promodel.com>
- ATM Black Vitrified Ceramic
- From: "Victor Lange" <victor@promodel.com>
- ATM Polishing Optics With 'smart Fluid'
- From: "Villarreal, Edward" <Edward.Villarreal@rehab.state.tx.us>
- Re: ATM Aluminum Oxide
- ATM New ( ? ) telescope design
- ATM Telescope redesign
- ATM Coude Cassegrainian Spider Alignment
- Re: ATM Brown Glass
- RE: ATM Daisy Finder-Removing coating
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: ATM Daisy Finder-Removing coating
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: ATM vs. Daisy coating
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: ATM here's another pulsar idea...
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- RE: ATM Using polishing machines as turntable only
- From: "Wagner,Rick [CIS-ISB]" <Rick.Wagner@EC.GC.CA>
- Re: ATM Copier Lenses and mirrors
- From: Walter Banks <walter@bytecraft.com>
- RE: ATM Help for designing eyepieces
- From: Wilfred Swinkels <wswinkels@otb.nl>
Mail converted by MHonArc 2.1.0