Re: ATM Advice re: tube rings

[Paul Gonzalez <pgonzalez@monmouth.com>]

> get the right size.  My tube is 6.5" OD while my router's base is 6" in
> diameter.  I have so far succeeded in cutting rings with inside diameters
> that are too small, or too large, but the base interferes with placing a
> nail to pivot at a 3.25" radius.
> 
> Kyle Barger                      


HI Kyle 

 you can usually take a routers base off and make your own base out of
wood. it doesn't have to be anything fancy just put your pivot nail at the
proper distance (remember measure from the outside edge of your bit) and
cut your circles.

hope this helps

paul