Re: ATM Hello

[andydtg@alpha1.phoenix.net]

Gord Seifert wrote:

>   Has anyone seen eyecups available separately that might be usable
>on an eyepiece of 33 to 34 mm. outside diameter? I suppose another option
>would be to carefully paint a ring of the rubber tool handle grip material
>around the very outer edge of the eyepiece or use a short section of the
>appropriate diameter rubber tubing just to enforce a small separation between
>the glasses and the metal.
>
>   Suggestions?

You might try finding a rubber 'o' ring that fits on top of eyepiece
& attach it with RTV (silicone rubber). It would protect your glasses
& not take up much room.


Andy Saulietis / DTG Alt-Az-Fp Drive Systems
12617 Harriet Ln
Santa Fe, TX 77510 USA
409-925-8854 Voice/Fax