Amateur Telescope Makers (ATM) Archive for AUG07 - by author

• Thread Index

• [ATM] Scratches keep forming on edge of mirror
  • From: Adam Krause <krausea34@yahoo.com>
• Re: [ATM] Scratches keep forming on edge of mirror
  • From: Adam Krause <krausea34@yahoo.com>
• Re: [ATM] Time for a "new standard" ATM telescope project?
  • From: Adam Krause <krausea34@yahoo.com>
• Re: [ATM] Scratches keep forming on edge of mirror
  • From: Adam Krause <krausea34@yahoo.com>
• Re: [ATM] Gluing aluminium to Wood
  • From: Adam Perkins <scopeguru@yahoo.com>
• [ATM] Aplanatic Beamsplitter Foucault
  • From: "aneves" <aneves@snowsoft.biz>
• Re: [ATM] Aplanatic Beamsplitter Foucault
  • From: "aneves" <aneves@snowsoft.biz>
• Re: [ATM] Aplanatic Beamsplitter Foucault
  • From: "aneves" <aneves@snowsoft.biz>
• [ATM] Klaas Honders Astrograph
  • From: "aneves" <aneves@snowsoft.biz>
• [ATM] Klaas Honders Astrograph
  • From: "aneves" <aneves@snowsoft.biz>
• Re: [ATM] Scratches keep forming on edge of mirror
  • From: "Anthony Anconetani" <Anthony.Anconetani@genband.com>
• Re: [ATM] 16in tridob rebuild 1st light (long)
  • From: "Anthony Anconetani" <Anthony.Anconetani@genband.com>
• Re: [ATM] Day and Night Foucault
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] need help with an altitude bearing problem
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Quartz test
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] HOW TO TEST THE SECONDARY MIRROR OF GREGORIAN
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• [ATM] Day and Night Foucault
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] pressing and glueing a wooden disk
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] pressing and glueing a wooden disk
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Plans
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] A powered alt-az ground-board
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Wavelengths of light
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Need help w/18" Stabilite mirror
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Multicoatings
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] HELP ME FOR GREGORIAN TELESCOPE
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] refractive index of air
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] first light on a Lurie-Houghton
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Starlight Optical MakNewt page
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] refractive index of air
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Gluing aluminium to Wood
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Stellafane
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Day and Night Foucault
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] pressing and glueing a wooden disk
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] first light on a Lurie-Houghton
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Dental Stone Tile Tool
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] refractive index of air
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] first light on a Lurie-Houghton
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] first light on a Lurie-Houghton
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] [atm] secondary mirror of gregorian
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Aplanatic Beamsplitter Foucault
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Scratches keep forming on edge of mirror
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Scratches keep forming on edge of mirror
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Klaas Honders Astrograph
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] [atm] how to test flat secondary mirror
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] A powered alt-az ground-board
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Klaas Honders Astrograph
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] A powered alt-az ground-board
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Klaas Honders Astrograph
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Klaas Honders Astrograph
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] broken hands mirror making
  • From: "Bob May" <rmay@nethere.com>
• [ATM] The Norman Test
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] The Norman Test
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] How to find Centre of Gravity of an existing telescope
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] The Norman Test
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] You Are a Smart Person...
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] The Norman Test
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Looking for information on a telescope design
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Looking for information on a telescope design
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Front aperature size on 20" RC
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] [atm] how to test flat secondary mirror
  • From: "Bob May" <rmay@nethere.com>
• Re: [ATM] Looking for information on a telescope design
  • From: "Bob May" <rmay@nethere.com>
• [ATM] Need help w/18" Stabilite mirror
  • From: Bob Reynolds <reynoldsbp@yahoo.com>
• Re: [ATM] Plans
  • From: brianb@u.washington.edu
• Re: [ATM] Ghost Critter!!!
  • From: brianb@u.washington.edu
• [ATM] How to find Centre of Gravity of an existing telescope
  • From: "Bruce MacDonald" <brumac@gmail.com>
• Re: [ATM] How to find Centre of Gravity of an existing telescope
  • From: "Bruce MacDonald" <brumac@gmail.com>
• [ATM] re gluing aluminium to woodre
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• [ATM] Multicoatings
  • From: "Chris Dalla Piazza" <dalchri@hotmail.com>
• Re: [ATM] Multicoatings
  • From: "Chris Dalla Piazza" <dalchri@hotmail.com>
• [ATM] Collimating a Lurie-Houghton Newtonian
  • From: "Chris Dalla Piazza" <dalchri@hotmail.com>
• Re: [ATM] first light on a Lurie-Houghton
  • From: "Chris Dalla Piazza" <dalchri@hotmail.com>
• [ATM] Lurie-Houghton real word picture
  • From: "Chris Dalla Piazza" <dalchri@hotmail.com>
• Re: [ATM] Lurie-Houghton real word picture
  • From: "Chris Dalla Piazza" <dalchri@hotmail.com>
• Re: [ATM] Looking for information on a telescope design
  • From: "Clyde Bone" <clydebone@zipnet.us>
• Re: [ATM] Looking for information on a telescope design
  • From: "Clyde Bone" <clydebone@zipnet.us>
• Re: [ATM] Looking for informationon a telescope design
  • From: "Clyde Bone" <clydebone@zipnet.us>
• Re: [ATM] need help with an altitude bearing problem
  • From: Curt Diggs <mokiman_210@yahoo.com>
• Re: [ATM] Wavelengths of light
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] need help with an altitude bearing problem
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Quartz test
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] My scope
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] How to find Centre of Gravity of an existing telescope
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] How to find Centre of Gravity of an existing telescope
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] My scope
  • From: Dan Harriman <kc5gxl@sbcglobal.net>
• Re: [ATM] Hercules v2.0
  • From: "Daniel Bakken" <deepsky4565@comcast.net>
• Re: [ATM] Multicoatings
  • From: "Dan Lago" <dlago@roinc.com>
• Re: [ATM] need help with an altitude bearing problem
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Gluing aluminium to Wood
  • From: Dave Smith <smithersscope@yahoo.com>
• [ATM] 16in tridob rebuild 1st light (long)
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] 16in tridob rebuild 1st light (flex rocker issues)
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] 16in tridob rebuild 1st light (ball sockets)
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] 16in tridob rebuild 1st light (long)
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] Fwd: [Fwd: [atm_free] Effect of pH on polishing fused silica was Re. Session 24...]
  • From: Dave Smith <smithersscope@yahoo.com>
• Re: [ATM] How to find Centre of Gravity of an existing telescope
  • From: dave w <daze39@earthlink.net>
• Re: [ATM] How to find Centre of Gravity of an existing telescope
  • From: dave w <daze39@earthlink.net>
• Re: [ATM] Looking for information on a telescope design
  • From: dave w <daze39@earthlink.net>
• [ATM] Edmund Optics "Techspec" brand achromat: suitable lens for small refractor?
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Time for a "new standard" ATM telescope project?
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Time for a "new standard" ATM telescope project?
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Edmund Optics "Techspec" brand achromat: suitable lensfor small refractor?
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Edmund Optics "Techspec" brand achromat: suitable lensfor small refractor?
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Effect of pH (etc.) on polishing...
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] broken hands mirror making
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Fwd: [Fwd: [atm_free] Effect of pH on polishingfused silica was Re. Session 24...]
  • From: David Weinshenker <daze39@earthlink.net>
• Re: [ATM] Plastic Lenses (POLYCARBONATE)
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Plastic Lenses (POLYCARBONITE)
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] A challenging 28" project
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] A challenging 28" project
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] A challenging 28" project
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] A challenging 28" project
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] A challenging 28" project
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Wavelengths of light
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Wavelengths of light
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Wavelengths of light
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Wavelengths of light
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] need help with an altitude bearing problem
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• [ATM] refractive index of air
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] refractive index of air
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] refractive index of air
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] refractive index of air
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Auto Collimation Flat - not cored
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] refractive index of air
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Gluing aluminium to Wood
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Gluing aluminium to Wood
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• [ATM] pressing and glueing a wooden disk
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Gluing aluminium to Wood
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] refractive index of air
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Gluing aluminium to Wood
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] pressing and glueing a wooden disk
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Ghost Critter!!!
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Scratches keep forming on edge of mirror
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• [ATM] polishing tool: Smartply vs plywood
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] polishing tool: Smartply vs plywood
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] polishing tool: Smartply vs plywood
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Klaas Honders Astrograph
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] 2 moons
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Klaas Honders Astrograph
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] 2 moons
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] 2 moons
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] The Norman Test
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] You Are a Smart Person...
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] The Norman Test
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Holographic Foucault Null Test - moving site?
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Fwd: [Fwd: [atm_free] Effect of pH on polishing fused silica was Re. Session 24...]
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] A powered alt-az ground-board
  • From: "Donald Good" <donald.good@comcast.net>
• Re: [ATM] How to find Centre of Gravity of an existing telescope
  • From: "Donald Good" <donald.good@comcast.net>
• Re: [ATM] Aplanatic Beamsplitter Foucault
  • From: don clement <donald_clement@yahoo.com>
• Re: [ATM] A powered alt-az ground-board
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] A powered alt-az ground-board
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] A powered alt-az ground-board
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] A powered alt-az ground-board
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] A powered alt-az ground-board
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Gluing Aluminum to wood
  • From: "Don D'Egidio" <djd521@comcast.net>
• [ATM] Fw: Scratches keep forming on edge of mirror
  • From: Don R Surles <Don.R.Surles-1@usa.dupont.com>
• Re: [ATM] Time for a "new standard" ATM telescope project?
  • From: "Eric S. Johansson" <esj@harvee.org>
• Re: [ATM] Time for a "new standard" ATM telescope project?
  • From: "Eric S. Johansson" <esj@harvee.org>
• Re: [ATM] First telescope
  • From: "Eric S. Johansson" <esj@harvee.org>
• Re: [ATM] Time for a "new standard" ATM telescope project?
  • From: "Eric S. Johansson" <esj@harvee.org>
• Re: [ATM] A powered alt-az ground-board
  • From: "Eric S. Johansson" <esj@harvee.org>
• Re: [ATM] My scope
  • From: "Eric S. Johansson" <esj@harvee.org>
• [ATM] broken hands mirror making
  • From: "Eric S. Johansson" <esj@harvee.org>
• Re: [ATM] My scope
  • From: "Eric S. Johansson" <esj@harvee.org>
• Re: [ATM] broken hands mirror making
  • From: "Eric S. Johansson" <esj@harvee.org>
• Re: [ATM] Where to get mirror coated?
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• [ATM] Wavelengths of light
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• [ATM] Auto Collimation Flat - not cored
  • From: "Francis J. O'Reilly" <foreilly@bestweb.net>
• [ATM] Plans
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• [ATM] Stellafane
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] [atm] how to test flat secondary mirror
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] [atm] how to test flat secondary mirror
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] Mersenne (was : Looking for information on a telescopedesign)
  • From: "Francis J. O'Reilly" <foreilly@verizon.net>
• Re: [ATM] HOW TO TEST THE SECONDARY MIRROR OF GREGORIAN
  • From: "franck griere" <franck.griere@orange.fr>
• Re: [ATM] [atm] how to test flat secondary mirror
  • From: "franck griere" <franck.griere@orange.fr>
• [ATM] Looking for information on a telescope design
  • From: <fundo@bellsouth.net>
• Re: [ATM] Quartz test
  • From: GARY FUCHS <gary@rcn.com>
• Re: [ATM] Quartz test
  • From: GARY FUCHS <gary@rcn.com>
• [ATM] 2 moons
  • From: Gerald Clay <gclay9999@yahoo.ca>
• [ATM] Cam attached to scopes
  • From: Gerald Clay <gclay9999@yahoo.ca>
• [ATM] My scope
  • From: Gerald Clay <gclay9999@yahoo.ca>
• Re: [ATM] need help with an altitude bearing problem
  • From: Gil McFarlane <gilboastro@yahoo.com>
• Re: [ATM] 64 pound single-pole 18" f/4.3
  • From: Gil McFarlane <gilboastro@yahoo.com>
• Re: [ATM] Lurie-Houghton real word picture
  • From: Gil McFarlane <gilboastro@yahoo.com>
• [ATM] Time for a "new standard" ATM telescope project?
  • From: Gil McFarlane <gilboastro@yahoo.com>
• Re: [ATM] First telescope
  • From: Gil McFarlane <gilboastro@yahoo.com>
• Re: [ATM] First telescope
  • From: Gil McFarlane <gilboastro@yahoo.com>
• Re: [ATM] Time for a "new standard" ATM telescope project?
  • From: Gil McFarlane <gilboastro@yahoo.com>
• Re: [ATM] 16in tridob rebuild 1st light (long)
  • From: Gil McFarlane <gilboastro@yahoo.com>
• Re: [ATM] 16in tridob rebuild 1st light (long)
  • From: Gil McFarlane <gilboastro@yahoo.com>
• Re: [ATM] Two Moons
  • From: glen youman <gyouman@sbcglobal.net>
• [ATM] Time for a "new standard" ATM telescope project?
  • From: Goo <vorblesnak@peak.org>
• Re: [ATM] Quartz test
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] first light on a Lurie-Houghton
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] first light on a Lurie-Houghton
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] first light on a Lurie-Houghton
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Plans
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] first light on a Lurie-Houghton
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] first light on a Lurie-Houghton
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Ghost Critter!!!
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] Fwd: CONGRESO DE ASTRONOM?A
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Scratches keep forming on edge of mirror
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• [ATM] Fwd: [Fwd: [atm_free] Effect of pH on polishing fused silica was Re. Session 24...]
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Fwd: [Fwd: [atm_free] Effect of pH on polishing fused silica was Re. Session 24...]
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] MakNewt webpage Starlight Optical
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Scratches keep forming on edge of mirror
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] First telescope
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] HELP ME FOR GREGORIAN TELESCOPE
  • From: Hugues.Laroche@ses-astra.com
• [ATM] First telescope
  • From: Jean-François B. <rainbsoft@hotmail.com>
• Re: [ATM] First telescope
  • From: Jean-François B. <rainbsoft@hotmail.com>
• Re: [ATM] Gluing aluminium to Wood
  • From: "James Sturtevant" <jhsturte@hotmail.com>
• Re: [ATM] Plans
  • From: "James Sturtevant" <jhsturte@hotmail.com>
• Re: [ATM] polishing tool: Smartply vs plywood
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] polishing tool: Smartply vs plywood
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] First telescope
  • From: Jarvis Krumbein <jkoptic@juno.com>
• Re: [ATM] Klaas Honders Astrograph
  • From: Jeff Lowe <lowe@nanotechsys.com>
• Re: [ATM] Lurie-Houghton real word picture
  • From: Jeff Rowe <jeffrowe@austin.rr.com>
• Re: [ATM] Edmund Optics "Techspec" brand achromat: suitable lens for small refractor?
  • From: Jeff Rowe <jeffrowe@austin.rr.com>
• Re: [ATM] First telescope
  • From: Jeff Rowe <jeffrowe@austin.rr.com>
• Re: [ATM] Looking for information on a telescope design
  • From: Jeff Rowe <jeffrowe@austin.rr.com>
• [ATM] [Fwd: [atm_free] Effect of pH on polishing fused silica was Re. Session 24...]
  • From: Jeff Rowe <jeffrowe@austin.rr.com>
• Re: [ATM] Fwd: [Fwd: [atm_free] Effect of pH on polishing fused silica was Re. Session 24...]
  • From: Jeff Rowe <jeffrowe@austin.rr.com>
• Re: [ATM] A powered alt-az ground-board
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] My scope
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] My scope
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] TOT and Oblate Spheroids
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] TOT and Oblate Spheroids
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] TOT and Oblate Spheroids
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] TOT and Oblate Spheroids
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Wavelengths of light
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] refractive index of air
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] refractive index of air
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] refractive index of air
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] TOT and Oblate Spheroids
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] TOT and Oblate Spheroids
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Where to get mirror coated?
  • From: Jim McPherson <jim@eflightproducts.com>
• [ATM] Wavelenghts of Light
  • From: johncdeitz@comcast.net
• Re: [ATM] Where to get mirror coated?
  • From: John Levreault <jlevro@comcast.net>
• Re: [ATM] 2 moons
  • From: John Lynch <john_lynch2007@yahoo.com>
• Re: [ATM] A powered alt-az ground-board
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] A powered alt-az ground-board
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] My scope
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• [ATM] sigh
  • From: klowther <klowther@cisnet.com>
• Re: [ATM] need help with an altitude bearing problem
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: [ATM] Gluing Aluminum to wood
  • From: "Lawrence D. Lopez" <lopez@mv.mv.com>
• Re: [ATM] Multicoatings
  • From: <lenses@adelphia.net>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• Re: [ATM] pressing and glueing a wooden disk
  • From: "Malcolm McDonald" <toliman@wave.co.nz>
• Re: [ATM] [atm] secondary mirror of gregorian
  • From: "Malcolm McDonald" <toliman@wave.co.nz>
• Re: [ATM] 2 moons
  • From: "Marco" <marco.miglionico@btinternet.com>
• Re: [ATM] Two Moons
  • From: "Marco" <marco.miglionico@btinternet.com>
• [ATM] TOT and Oblate Spheroids
  • From: "Mark Clement" <maclement@email.com>
• Re: [ATM] [Fwd: [atm_free] Effect of pH on polishing fused silica was Re. Session 24...]
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: [ATM] Fwd: [Fwd: [atm_free] Effect of pH on polishing fused silica was Re. Session 24...]
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: [ATM] Plastic Lenses (POLYCARBONITE)
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] My scope
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] My scope
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] TOT and Oblate Spheroids
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] 2 moons
  • From: "Matthew Fuchs" <matthew.fuchs@gmail.com>
• [ATM] Holographic Foucault Null Test - moving site?
  • From: "mauritz andersson" <ztiruam@gmail.com>
• Re: [ATM] 2 moons
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• [ATM] Oregon Star Party telescope walkabout
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Need help w/18" Stabilite mirror
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] polishing tool: Smartply vs plywood
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] A powered alt-az ground-board
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] A challenging 28" project
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] A challenging 28" project
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] A challenging 28" project
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] NA, Quartz test
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Quartz test
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Bearing
  • From: Mike Rock <mikerock@mhtc.net>
• Re: [ATM] Bearing
  • From: Mike Rock <mikerock@mhtc.net>
• Re: [ATM] Stellafane
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Auto Collimation Flat - not cored
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] First telescope
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Looking for information on a telescope design
  • From: "Mitchell R" <funnybone101@embarqmail.com>
• Re: [ATM] Plastic Lenses (POLYCARBONATE)
  • From: Nils Olof Carlin <nilsolof.carlin@telia.com>
• Re: [ATM] How to find Centre of Gravity of an existing telescope
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] How to find Centre of Gravity of an existing telescope
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] My scope
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] Gluing aluminium to Wood
  • From: "Norm Prince" <princenorman@bellsouth.net>
• [ATM] Ghost Critter!!!
  • From: "Norm Prince" <princenorman@bellsouth.net>
• Re: [ATM] Ghost Critter!!!
  • From: "Norm Prince" <princenorman@bellsouth.net>
• Re: [ATM] Plans
  • From: "RC Stargazer \(Dave\)" <david@tabor.com>
• Re: [ATM] Plastic Lenses (POLYCARBONATE)
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Plastic Lenses (POLYCARBONATE)
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] A challenging 28" project
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] A challenging 28" project
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Wavelengths of light
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Wavelengths of light
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Optical flat part II
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] A challenging 28" project
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] refractive index of air
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] refractive index of air
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] refractive index of air
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] refractive index of air
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] refractive index of air
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Aplanatic Beamsplitter Foucault
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Another Solution
  • From: Richard <cnc@cncservo.co.uk>
• [ATM] Lurie Houghton Calculator new version
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] [atm] how to test flat secondary mirror
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] First telescope
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Edmund Optics "Techspec" brand achromat: suitable lens for small refractor?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] polishing tool: Smartply vs plywood
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Edmund Optics "Techspec" brand achromat: suitable lensfor small refractor?
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Front aperature size on 20" RC
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Mersenne (was : Looking for information on a telescope design)
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Effect of pH (etc.) on polishing...
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Aplanatic Beamsplitter Foucault
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Another Solution
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Another Solution
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] OSLO Tools
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Klaas Honders Astrograph
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Klaas Honders Astrograph
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] OSLO Tools
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] OSLO Tools
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Giving a Dam
  • From: "Richard Schwartz" <richard1941@gmail.com>
• [ATM] Give a Dam
  • From: "Richard Schwartz" <richard1941@gmail.com>
• Re: [ATM] A challenging 28" project
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] Need help w/18" Stabilite mirror
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] Gluing Aluminum to wood
  • From: "RodShea" <RodShea@comcast.net>
• [ATM] polishing tool: Smartply vs plywood
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• Re: [ATM] need help with an altitude bearing problem
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: [ATM] need help with an altitude bearing problem
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: [ATM] need help with an altitude bearing problem
  • From: Ross Sackett <rsackett00@yahoo.com>
• [ATM] 64 pound single-pole 18" f/4.3
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: [ATM] 64 pound single-pole 18" f/4.3
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: [ATM] 64 pound single-pole 18" f/4.3
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: [ATM] 64 pound single-pole 18" f/4.3
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: [ATM] First telescope
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: [ATM] First telescope
  • From: Ross Sackett <rsackett00@yahoo.com>
• Re: [ATM] A powered alt-az ground-board
  • From: Ross Sackett <rsackett00@yahoo.com>
• [ATM] need help with an altitude bearing problem
  • From: RP <rp@suttonsonline.us>
• [ATM] Gluing Aluminum to wood
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• Re: [ATM] First telescope
  • From: "Scott Ewart" <scotte@frontiernet.net>
• Re: [ATM] Looking for information on a telescope design
  • From: "Scott Milligan" <starzkey@charter.net>
• Re: [ATM] Looking for information on a telescope design
  • From: "Scott Milligan" <starzkey@charter.net>
• [ATM] HELP ME FOR GREGORIAN TELESCOPE
  • From: seyyed mahmoud ghasemi <modeler72@yahoo.com>
• [ATM] HOW TO TEST THE SECONDARY MIRROR OF GREGORIAN
  • From: seyyed mahmoud ghasemi <modeler72@yahoo.com>
• [ATM] [atm] secondary mirror of gregorian
  • From: seyyed mahmoud ghasemi <modeler72@yahoo.com>
• [ATM] [atm] how to test flat secondary mirror
  • From: seyyed mahmoud ghasemi <modeler72@yahoo.com>
• [ATM] Auto Collimation Flat - not cored
  • From: "Shane LaPierre" <shane@ct-astronomer.com>
• [ATM] A powered alt-az ground-board
  • From: "Shane LaPierre" <shane@ct-astronomer.com>
• Re: [ATM] A powered alt-az ground-board
  • From: "Shane LaPierre" <shane@ct-astronomer.com>
• Re: [ATM] A powered alt-az ground-board
  • From: "Shane LaPierre" <shane@ct-astronomer.com>
• Re: [ATM] Hercules v2.0
  • From: "Shane LaPierre" <shane@ct-astronomer.com>
• Re: [ATM] Holographic Foucault Null Test - moving site?
  • From: "Stephen Koehler" <s.c.koehler@gmail.com>
• [ATM] Looking for information on a telescope design
  • From: "Steve Chambers" <Steve@pmdo.com>
• Re: [ATM] Looking for information on a telescope design
  • From: "Steve Chambers" <Steve@pmdo.com>
• Re: [ATM] Ghost Critter!!!
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] broken hands mirror making
  • From: "Thomas Janstrom" <thomas@moiler.com>
• [ATM] Gluing aluminium to Wood
  • From: "Tim Nott" <timothy.nott@ims.sa.edu.au>
• Re: [ATM] Gluing aluminium to Wood
  • From: "Tim Nott" <timothy.nott@ims.sa.edu.au>
• [ATM] Luceal
  • From: Tom Conlin <tomc@cs.uoregon.edu>
• Re: [ATM] Time for a "new standard" ATM telescope project?
  • From: Tom Conlin <tomc@cs.uoregon.edu>
• [ATM] Magdalena Ridge Observatory - photos
  • From: "Tom Krajci" <tom_krajci@tularosa.net>
• Re: [ATM] Multicoatings
  • From: "Tony Owens" <towens@shibumi-consulting.net>
• Re: [ATM] Plans
  • From: "Virgil.Johnson" <virgilaj@charter.net>
• Re: [ATM] Wavelengths of light
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] Wavelengths of light
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] first light on a Lurie-Houghton
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] Looking for information on a telescope design
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] Looking for information on a telescope design
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] Looking for information on a telescope design
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] 2 moons
  • From: waldo kitty <wkitty42@alltel.net>
• Re: [ATM] Two Moons
  • From: waldo kitty <wkitty42@alltel.net>
• Re: [ATM] 64 pound single-pole 18" f/4.3
  • From: William Lee <wjl12@comcast.net>
• Re: [ATM] 64 pound single-pole 18" f/4.3
  • From: William Lee <wjl12@comcast.net>
• Re: [ATM] MakNewt webpage Starlight Optical
  • From: William Lee <wjl12@comcast.net>
• Re: [ATM] Gluing aluminium to Wood
  • From: William Lee <wjl12@comcast.net>
• Re: [ATM] Auto Collimation Flat - not cored
  • From: William Marriott <bmarriott@pacbell.net>
• Re: [ATM] Auto Collimation Flat - not cored
  • From: William Marriott <bmarriott@pacbell.net>
• Re: [ATM] Auto Collimation Flat - not cored
  • From: William Marriott <bmarriott@pacbell.net>
• Re: [ATM] MakNewt webpage Starlight Optical
  • From: William Marriott <bmarriott@pacbell.net>
• [ATM] Starlight Optical MakNewt page
  • From: William Marriott <bmarriott@pacbell.net>
• [ATM] Dental Stone Tile Tool
  • From: William Marriott <bmarriott@pacbell.net>
• Re: [ATM] Scratches keep forming on edge of mirror
  • From: William Marriott <bmarriott@pacbell.net>
• Re: [ATM] Scratches keep forming on edge of mirror
  • From: William Marriott <bmarriott@pacbell.net>
• [ATM] Front aperature size on 20" RC
  • From: William Marriott <bmarriott@pacbell.net>
• Re: [ATM] TOT and Oblate Spheroids
  • From: William Marriott <bmarriott@pacbell.net>
• [ATM] Fwd: [atm_free] Effect of pH on polishing fused silica was Re. Session 24...]
  • From: William Marriott <bmarriott@pacbell.net>
• Re: [ATM] Holographic Foucault Null Test - moving site?
  • From: wjl12@comcast.net
• Re: [ATM] Looking for information on a telescope design
  • From: wjl12@comcast.net