[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder

To: <atm@atmlist.net>
Subject: Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
From: "Martin Cibulski" <martin.cibulski@t-online.de>
Date: Sun, 27 Aug 2006 21:18:07 +0200
Delivered-to: atm_arc@astro.umsystem.edu
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <mailman.1.1156647600.24156.atm@atmlist.net>
Sender: atm-bounces@atmlist.net

Ulhas,

my page isn't down but I moved it to new domain
two years ago.

The link is:
http://martin-cibulski.de/atm/pregeneration/index.htm

I wouldn't recommend my procedure today. There
are others who used a wooden template having
the correct radius.
The grinder has to be mounted on the template which
moves on wheels over the mirror.

Regards,
Martin Cibulski


_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  - From: Guy Brandenburg <gfbrandenburg@yahoo.com>

Prev by Author: Re: [ATM] Inverse Ronchi program
Next by Author: Re: [ATM] undercorrecting?
Previous by thread: Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
Next by thread: Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
Index(es):
- Author
- Thread