[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Advice for shipping a 16" mirror

To: <atm@atmlist.net>
Subject: Re: [ATM] Advice for shipping a 16" mirror
From: "Alan K. Henderson" <alankh@ev1.net>
Date: Fri, 11 Aug 2006 22:00:27 -0500
Delivered-to: atm_arc@astro.umsystem.edu
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
Reply-to: "Alan K. Henderson" <alankh@ev1.net>
Sender: atm-bounces@atmlist.net

Correction: Home Depot sells 3/4-inch Owens-Corning Foamular foam insulation. I would have to buy at least two sheets of the stuff to pack the mirror (it's 3.5" thick) - was hoping I wouldn't have to spend $20 on styrofoam. Is the Owens-Corning foam good enough for the task?
  ----- Original Message ----- 
  From: Alan K. Henderson 
  To: atm@atmlist.net 
  Sent: Tuesday, August 08, 2006 3:39 PM
  Subject: Advice for shipping a 16" mirror

  The Home Depot in my neighborhood sells 1" pink foam. Lowe's doesn't even have that. Who sells the 2-inch foam?
_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] Advice for shipping a 16" mirror
  - From: <atm@hudler.org>

Prev by Author: [ATM] Advice for shipping a 16" mirror
Next by Author: Re: [ATM] The standard aluminium coating: How much scatter?
Previous by thread: Re: [ATM] Advice for shipping a 16" mirror
Next by thread: Re: [ATM] Advice for shipping a 16" mirror
Index(es):
- Author
- Thread