[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] wire spider ready!

To: <atm@atmlist.net>
Subject: Re: [ATM] wire spider ready!
From: "Don Clement" <clement.focuser@verizon.net>
Date: Sat, 05 Aug 2006 14:35:07 -0700
Delivered-to: atm_arc@astro.umsystem.edu
List-archive: <http://www.atmlist.net/pipermail/atm>
List-help: <mailto:atm-request@atmlist.net?subject=help>
List-id: The Amateur Telescope Makers List <atm.atmlist.net>
List-post: <mailto:atm@atmlist.net>
List-subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=subscribe>
List-unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>, <mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <002b01c6b8ca$39f9e1e0$63012001@bbad>
Sender: atm-bounces@atmlist.net

>  So we have wire spiders and wire trusses - how far can we go?


I go one step further in reducing moving mass; focusing by moving the
primary mirror, thus shifting the mass of the focuser to underneath the
primary mirror to further reduce the moving mass at the far end of the
truss.



Don Clement

Running Springs, California

_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] wire spider ready!
  - From: "Mel Bartels" <mbartels@bbastrodesigns.com>

References:
- Re: [ATM] wire spider ready!
  - From: "Mel Bartels" <mbartels@bbastrodesigns.com>

Prev by Author: Re: [ATM] Need source for large Timing Belt
Next by Author: Re: [ATM] wire spider ready!
Previous by thread: Re: [ATM] wire spider ready!
Next by thread: Re: [ATM] wire spider ready!
Index(es):
- Author
- Thread