Amateur Telescope Makers (ATM) Archive for AUG06 - by author

• Thread Index

• [ATM] Advice for shipping a 16" mirror
  • From: "Alan K. Henderson" <alankh@ev1.net>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: "Alan K. Henderson" <alankh@ev1.net>
• Re: [ATM] The standard aluminium coating: How much scatter?
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] The standard aluminium coating: How much scatter?
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] 20" f/4 - f/23 spherical Mangin Cassegrain
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] undercorrecting?
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• [ATM] Thermal mirror deformation
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Draw Tube Length
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] my first RONCHI test, with video of it
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Thermal mirror deformation -fan on both sides
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Thermal mirror deformation -fan on both sides
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Thermal mirror deformation
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: <atm@hudler.org>
• Re: [ATM] undercorrecting?
  • From: "B. Bainbridge" <brianb@u.washington.edu>
• [ATM] (no subject)
  • From: Bob Liesenfeld <wb0poq@visi.com>
• Re: [ATM] Newbie needs help getting to sphere...
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] EQ Platform drive
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] ATM Suppliers, etc..
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] undercorrecting?
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Making blanks round
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Making blanks round
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Making Blanks Round
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] next mirror .. hand grind or build a grinding machine??
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] my first Foucault look-see-semi-test
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Inverse Ronchi program
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] I got this blank...
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Making a trepanning biscuit cutter
  • From: "Bob May" <bobmay@nethere.com>
• [ATM] Polishing/figuring not going anywhere.
  • From: "Bob May" <bobmay@nethere.com>
• [ATM] Making a trepanning biscuit cutter
  • From: "Christopher Dalla Piazza" <dalchri@hotmail.com>
• Re: [ATM] Mirror back from coaters with scratches
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Thermal mirror deformation -fan on both sides
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] undercorrecting?
  • From: "Dan Lago" <dlago@roinc.com>
• Re: [ATM] webcam and foucault test?
  • From: "David Bevel" <dhcb@bellsouth.net>
• Re: [ATM] USB stepper controller
  • From: "David Bevel" <dhcb@bellsouth.net>
• [ATM] Stubborn TDE
  • From: David Steinhauer <desteinhauer@verizon.net>
• [ATM] Stubborn TDE
  • From: David Steinhauer <desteinhauer@verizon.net>
• Re: [ATM] Stubborn TDE
  • From: David Steinhauer <desteinhauer@verizon.net>
• [ATM] How's this mirror look?
  • From: davidtrumble@comcast.net
• Re: [ATM] Stubborn TDE
  • From: <desteinhauer@verizon.net>
• Re: [ATM] USB stepper controller
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Mirror back from coaters with scratches
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] EQ Platform drive
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Need source for large Timing Belt
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] wire spider ready!
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] wire spider ready!
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] wire spider ready!
  • From: "Don Clement" <clement.focuser@verizon.net>
• [ATM] Bearing smoothness limit
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Bearing smoothness limit
  • From: "Don Clement" <don_clement@charter.net>
• Re: [ATM] Draw Tube Length
  • From: "Don Clement" <don_clement@charter.net>
• [ATM] Draw Tube Length
  • From: "Doug Williams" <salguod@minbaritm.com>
• Re: [ATM] undercorrecting?
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• Re: [ATM] undercorrecting?
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• Re: [ATM] Thermal mirror deformation
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• [ATM] Inverse Ronchi program
  • From: "eheiny" <eheiny@yahoo.com>
• Re: [ATM] Strain testing - was Inverse Ronchi program
  • From: GARY FUCHS <gary@rcn.com>
• [ATM] OT: Death in the family
  • From: GF <gary@rcn.com>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: GF <gary@rcn.com>
• [ATM] The standard aluminium coating: How much scatter?
  • From: "Guntram Lampert" <glampert@aon.at>
• Re: [ATM] The standard aluminium coating: How much scatter?
  • From: "Guntram Lampert" <glampert@aon.at>
• [ATM] The standard aluminium coating: How much scatter?
  • From: Guntram Lampert <glampert@aon.at>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] undercorrecting?
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] the list
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: hermit <hermit@outofoptions.org>
• [ATM] Inverse Ronchi program
  • From: hermit <hermit@outofoptions.org>
• [ATM] Mirror back from coaters with scratches
  • From: Hiroyuki HIKITA <hikita@tkb.att.ne.jp>
• Re: [ATM] Mirror back from coaters with scratches
  • From: Hiroyuki HIKITA <hikita@tkb.att.ne.jp>
• Re: [ATM] Scratches on a primary back from the coaters...
  • From: Hiroyuki HIKITA <hikita@tkb.att.ne.jp>
• [ATM] Making blanks round
  • From: IAPDK@ADMIN.DRAKE.EDU
• Re: [ATM] Making Blanks Round
  • From: IAPDK@ADMIN.DRAKE.EDU
• Re: [ATM] Making blanks round
  • From: IAPDK@ADMIN.DRAKE.EDU
• Re: [ATM] Advice for shipping a 16" mirror
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] starfest anybody?
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: James Crombie <jamescrombie@jamescrombie.com>
• Re: [ATM] undercorrecting?
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] undercorrecting?
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• [ATM] wire spider ready!
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Thermal mirror deformation
  • From: "Jan van Gastel" <jhm.vangastel@wanadoo.nl>
• Re: [ATM] Thermal mirror deformation
  • From: Jarvis Krumbein <jkoptic@juno.com>
• [ATM] 20" f/4 - f/23 spherical Mangin Cassegrain
  • From: Jean Fejes <JsFejes@Swva.net>
• [ATM] 20" f/4 - f/23 spherical Mangin Cassegrain
  • From: Jean Fejes <JsFejes@Swva.net>
• Re: [ATM] undercorrecting?
  • From: "Jean-Guy Moreau" <jgmoreau@cablevision.qc.ca>
• [ATM] Modified Offner Null
  • From: Jeff Lowe <lowe@nanotechsys.com>
• Re: [ATM] Bob Fies
  • From: jeff newsom <triolian@earthlink.net>
• [ATM] stubborn tde
  • From: jeff newsom <triolian@earthlink.net>
• Re: [ATM] Mirror back from coaters with scratches
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Stubborn TDE
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Stubborn TDE
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Stubborn TDE
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Polishing/figuring not going anywhere.
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Stubborn TDE
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] The standard aluminium coating: How much scatter?
  • From: "Jerry Reddell" <jerry.p.reddell63@sbcglobal.net>
• [ATM] undercorrecting?
  • From: J H M Gastel <jhm.vangastel@wanadoo.nl>
• Re: [ATM] undercorrecting?
  • From: J H M Gastel <jhm.vangastel@wanadoo.nl>
• Re: [ATM] undercorrecting?
  • From: J H M Gastel <jhm.vangastel@wanadoo.nl>
• [ATM] Eyepiece testing.
  • From: Jim Burrows <burrjaw@earthlink.net>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: Joe <nss@mwt.net>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: John Lynch <john_lynch2006@yahoo.com>
• Re: [ATM] Newbie needs help getting to sphere...
  • From: John Lynch <john_lynch2006@yahoo.com>
• [ATM] Newtonian Notes
  • From: John Lynch <john_lynch2006@yahoo.com>
• Re: [ATM] undercorrecting?
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] The standard aluminium coating: How much scatter?
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] Stubborn TDE
  • From: Jonathan Bsihop <jonathan_bishop@sbcglobal.net>
• Re: [ATM] Source for mirror mount etc.
  • From: "Julio Sanchez" <jsanchez@skipanon.com>
• Re: [ATM] How's this mirror look?
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Draw Tube Length
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Newbie needs help getting to sphere...
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• [ATM] starfest anybody?
  • From: "lance clarke" <alaskawolfjoe@hotmail.com>
• Re: [ATM] undercorrecting?
  • From: "laurence vincent" <laurence.vincent@club-internet.fr>
• Re: [ATM] Eyepiece testing.
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Newtonian Notes
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Inverse Ronchi program
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: "Martin Cibulski" <martin.cibulski@t-online.de>
• Re: [ATM] undercorrecting?
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] wire spider ready!
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] undercorrecting?
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] next mirror .. hand grind or build a grinding machine??
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] wire spider ready!
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] wire spider ready!
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] wire spider ready!
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] wire spider ready!
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] wire spider ready!
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] The standard aluminium coating: How much scatter?
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• [ATM] Truss analysis software
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Misc. topics
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] undercorrecting?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] undercorrecting?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] undercorrecting?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Draw Tube Length
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Thermal mirror deformation
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Inverse Ronchi program
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Stubborn TDE
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Strain testing - was Inverse Ronchi program
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Stubborn TDE
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] undercorrecting?
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: Mike Rock <mikerock@mhtc.net>
• Re: [ATM] Draw Tube Length
  • From: "Mitch" <funnybone101@earthlink.net>
• [ATM] the list
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] the list
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Mirror back from coaters with scratches
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] my first RONCHI test, with video of it
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Thermal mirror deformation -fan on both sides
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Stubborn TDE
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Stubborn TDE
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Rocker/Mirror Box lateral shift
  • From: "Mitch" <funnybone101@earthlink.net>
• Re: [ATM] Making blanks round
  • From: "Mutalib Abdallah" <omegatroid@hotmail.com>
• Re: [ATM] undercorrecting?
  • From: Nils Olof Carlin <nilsolof.carlin@telia.com>
• [ATM] Rocker/Mirror Box lateral shift
  • From: "Patrick Hudelot" <hudelot.patrick@googlemail.com>
• [ATM] Guiding on 17.5 dobson
  • From: "Patrick Hudelot" <hudelot.patrick@googlemail.com>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: Pete <lenses@adelphia.net>
• Re: [ATM] Polishing/figuring not going anywhere.
  • From: Pete <lenses@adelphia.net>
• Re: [ATM] starfest anybody?
  • From: "Peter" <peter@kitgear.com>
• Re: [ATM] Bearing smoothness limit
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Modified Offner Null
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Inverse Ronchi program
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Alternative Petzval Design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Alternative Petzval Design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] Matched Radii Design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Newtonian Notes
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] 125 mm f/4 Littrow-Lurie-Houghton Refractor
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] New Glass Type
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] 150 mm f/7 Refractor
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] New Glass Type
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Aluminum Coating Company
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] Cassegrain Calculator -error corrected.
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] Thermal mirror deformation -fan on both sides
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] Thermal mirror deformation -fan on both sides
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: [ATM] Thermal mirror deformation
  • From: Ric Rokosz <radicell2@yahoo.com>
• [ATM] next mirror .. hand grind or build a grinding machine??
  • From: "Robert OToole" <polaris@gsinet.net>
• [ATM] Making blanks round
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] wire spider ready!
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] wire spider ready!
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] wire spider ready!
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] my first Foucault look-see-semi-test
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] the list
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] my first RONCHI test, with video of it
  • From: Roman Toledo <rtoledo2002@yahoo.com>
• [ATM] someone to observe with in the Orlando, FL area next week
  • From: RP Sutton <rp@suttonsonline.us>
• [ATM] Light scatter on a mirror surface
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• [ATM] Scratches on a primary back from the coaters...
  • From: "Russell Jocoy" <russjocoy@hotmail.com>
• Re: [ATM] Or over-correction?
  • From: "Scott Ewart" <scotte@frontiernet.net>
• Re: [ATM] the list
  • From: "Scott Ewart" <scotte@frontiernet.net>
• Re: [ATM] The standard aluminium coating: How much scatter?
  • From: "Scott Milligan" <starzkey@charter.net>
• Re: [ATM] Thermal mirror deformation
  • From: "Scott Milligan" <starzkey@charter.net>
• [ATM] I got this blank...
  • From: "Shane LaPierre" <shane@ct-astronomer.com>
• Re: [ATM] USB stepper controller
  • From: Sonya Gaskell <sonya@ggms.com>
• Re: [ATM] undercorrecting?
  • From: spoon@pageamerica.net
• Re: [ATM] Or over-correction?
  • From: spoon@pageamerica.net
• Re: [ATM] Thermal mirror deformation
  • From: <starzkey@charter.net>
• Re: [ATM] next mirror .. hand grind or build a grinding machine??
  • From: Steve Beccue <lsteve@beccue.com>
• Re: [ATM] Mirror back from coaters with scratches
  • From: "Thomas Janstrom" <thomas@moiler.com>
• [ATM] Curve generating machine
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Newtonian Notes
  • From: Thomas Rutherford <rutherfordt@earthlink.net>
• Re: [ATM] Newtonian Notes
  • From: Thomas Rutherford <rutherfordt@earthlink.net>
• Re: [ATM] The standard aluminium coating: How much scatter?
  • From: "tom bouthillier" <athenabout@hotmail.com>
• Re: [ATM] Stubborn TDE
  • From: "tom bouthillier" <athenabout@hotmail.com>
• Re: [ATM] undercorrecting?
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] undercorrecting?
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] undercorrecting?
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] next mirror .. hand grind or build a grinding machine??
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] next mirror .. hand grind or build a grinding machine??
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Advice for shipping a 16" mirror
  • From: "tony gondola" <acgna@comcast.net>
• [ATM] Aluminum Coating Company
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Aluminum Coating Company
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] The standard aluminium coating: How much scatter?
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Mirror back from coaters with scratches
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Thermal mirror deformation -fan on both sides
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Thermal mirror deformation -fan on both sides
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Thermal mirror deformation -fan on both sides
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] Guiding on 17.5 dobson
  • From: "Treur, Harro" <harro.treur@waternet.nl>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• [ATM] Or over-correction?
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] Or over-correction?
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] The standard aluminium coating: How much scatter?
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] ATM Mirror Curve Generation with an Angle Grinder
  • From: William Lee <wjl12@comcast.net>