Re: [ATM] Tile Tools

[Guy Brandenburg <gfbrandenburg@yahoo.com>]

There might be something said for melting some
paraffin wax or beeswax and filling in the channels to
make absolutely certain that none of the grit comes
out, after you clean the channels out as well as
possible with a toothbrush. The only problem is that
you then have to find a safe way to remove the wax
when you go onto the next grit after that; that will
probably require putting the entire lap in an oven for
a while.
Guy

--- Mel Bartels <mbartels@bbastrodesigns.com> wrote:

> > He has cleaned the channels with a brush but still
> has grit in there.
> 
> Have him try again, using a toothbrush.  Most likely
> he didn't try very hard 
> or very carefully first time.  If the grit can't be
> pulled from the tool, 
> then it won't fall off the tool either.
> 
> Mel Bartels 
> 
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
> 


Guy  Brandenburg
Washington, DC
My home page:
http://home.earthlink.net/~gfbranden/GFB_Home_Page.html
_______________________________________________
ATM mailing list http://www.atmlist.net/