[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] aluminum mesh tube

To: <atm@atmlist.net>
Subject: Re: [ATM] aluminum mesh tube
From: "Bob May" <bobmay@nethere.com>
Date: Fri, 12 Aug 2005 11:20:53 -0700
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <WorldClient-F200508121351.AA51262633@ipm.ir>
Sender: atm-bounces@atmlist.net

The only reason that I'd do such a process is that I've got some
mesh floating around and some fiberglass epoxy that just needs to
be used up.
Process would be the same as doing it with standard fiberglass
cloth.  I would probably want to have the mesh freshly
sandblasted just to insure that there would be enough tooth for
the epoxy to hold to the mesh.
Bob May
bobmay@nethere.com
http://nav.to/bobmay
http://bobmay.astronomy.net

_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- [ATM] aluminum mesh tube
  - From: "Ali Shojai Baghini" <Shojai@ipm.ir>

Prev by Author: Re: [ATM] Mirror Cell support ---PLOP?
Next by Author: Re: [ATM] Using a weight during polishing
Prev by thread: [ATM] aluminum mesh tube
Next by thread: Re: [ATM] aluminum mesh tube
Index(es):
- Author
- Thread