[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Clock drives and Tracking systems

To: "Mel Bartels" <mbartels@bbastrodesigns.com>, <Atm@atmlist.net>
Subject: Re: [ATM] Clock drives and Tracking systems
From: "Don D'Egidio" <djd521@comcast.net>
Date: Sun, 29 Aug 2004 18:34:27 -0400
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
References: <4131CCB6.11454.15B5FA3@localhost><002901c48de6$7118c620$63012001@bbad>
Sender: atm-bounces@atmlist.net

Mel,

Wasn't that the article where he used an Apple computer for control of the motors?

Don

----- Original Message ----- 
From: "Mel Bartels" <mbartels@bbastrodesigns.com>
To: <Atm@atmlist.net>
Sent: Sunday, August 29, 2004 12:37
Subject: Re: [ATM] Clock drives and Tracking systems


> 
> If you go back a few years, you'll find a pic or two in a Sky&Tel article
> describing a French (?) scope where two drive wheels manipulated the curved
> surface to produce tracking at any pointing position.
> 
> Mel


_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] Clock drives and Tracking systems
  - From: "Mel Bartels" <mbartels@bbastrodesigns.com>

References:
- [ATM] Clock drives and Tracking systems
  - From: artbianconi@blast.net
- Re: [ATM] Clock drives and Tracking systems
  - From: "Mel Bartels" <mbartels@bbastrodesigns.com>

Prev by Author: Re: [ATM] mobsby null test
Next by Author: RE: [ATM] re: Slotting steel
Prev by thread: Re: [ATM] Clock drives and Tracking systems
Next by thread: Re: [ATM] Clock drives and Tracking systems
Index(es):
- Author
- Thread