[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: ATM Robo2 VS The Micrometer
Hi James,
If you can index from a known screw phase then you can make a test run and use these data for screw calibration. Of course, first make sure that the micrometer axis is aligned with the tester's axis. As it is, you have roughly a 1-2% error in measuring the LA. An error mechanism of this magnitude is certainly worth reducing.
Dave Rowe
> A suggested, I ran a micrometer test against the longitudinal axis of Robo2
> today. <snip>