Amateur Telescope Makers (ATM) Archive for AUG02 - by author

• Thread Index

• Re: ATM Spider Advice
  • From: u.suessenberger@t-online.de ("Uwe Süßenberger")
• ATM asteroid
  • From: "Aidan Schurr" <Aidan.Schurr@hvh.co.nz>
• ATM Caustic Tester
  • From: "Alfredo Neves" <aneves@novared.cl>
• ATM Encoder shaft diameter?
  • From: AMaroney@sptimes.com
• ATM Foucault tester
  • From: Andrew Melville <a.melville@mailbox.gu.edu.au>
• ATM Fixed vs Moving source
  • From: Andrew Melville <a.melville@mailbox.gu.edu.au>
• RE: ATM Foucault tester
  • From: Andrew Melville <a.melville@mailbox.gu.edu.au>
• ATM First Ronchi test
  • From: Andrew Melville <a.melville@mailbox.gu.edu.au>
• RE: ATM First Ronchi test
  • From: Andrew Melville <a.melville@mailbox.gu.edu.au>
• ATM Stellarfane web page
  • From: Andrew Melville <a.melville@mailbox.gu.edu.au>
• RE: ATM Simulating stroke affects
  • From: Andrew Melville <a.melville@mailbox.gu.edu.au>
• RE: ATM Light colour vs effect on night vision
  • From: Andrew Melville <a.melville@mailbox.gu.edu.au>
• RE: ATM Light colour vs effect on night vision
  • From: Andrew Melville <a.melville@mailbox.gu.edu.au>
• ATM Which colour
  • From: Andrew Melville <a.melville@mailbox.gu.edu.au>
• ATM spider focuser positions
  • From: Andrew Melville <a.melville@mailbox.gu.edu.au>
• ATM Remove
  • From: "Andy" <andy73@cox.net>
• RE: ATM Why?
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM self contained vibration damper....
  • From: Andy Saulietis <iss@pvtnetworks.net>
• Re: ATM Hogging Out -making flats????
  • From: Anthony Stillman <atmer@flash.net>
• ATM Generalized Caustic
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Generalized Caustic
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM Generalized Caustic
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM SiC or AlO
  • From: Anthony Stillman <atmer@flash.net>
• RE: ATM Generalized Caustic, Simple Algebraic Formula NOCALCULUS!!!
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM SiC or AlO
  • From: Anthony Stillman <atmer@flash.net>
• Re: ATM self contained vibration damper....
  • From: Anthony Stillman <atmer@flash.net>
• ATM back I think
  • From: "Arjan te Marvelde (ELN)" <Arjan.te.Marvelde@eln.ericsson.se>
• ATM Restoring an old Coude refractor
  • From: Assaf Berwald <meshoamam@yahoo.com>
• Re: ATM Restoring an old Coude refractor
  • From: Assaf Berwald <meshoamam@yahoo.com>
• Re: ATM Restoring an old Coude refractor
  • From: Assaf Berwald <meshoamam@yahoo.com>
• ATM Restoring a 6"coude- Another question
  • From: Assaf Berwald <meshoamam@yahoo.com>
• Re: ATM Restoring a 6"coude- Another question
  • From: Assaf Berwald <meshoamam@yahoo.com>
• ATM 32" observing reports, close to the end
  • From: "at making" <atmaking@hotmail.com>
• Re: [bigdob] Re: ATM 32" observing reports, close to the end
  • From: "at making" <atmaking@hotmail.com>
• ATM Removable bearings for a dob
  • From: "at making" <atmaking@hotmail.com>
• ATM Re: [bigdob] Removable bearings for a dob
  • From: "at making" <atmaking@hotmail.com>
• ATM Re: [bigdob] Removable bearings for a dob
  • From: "at making" <atmaking@hotmail.com>
• Re: ATM Website update on other telescopes
  • From: "at making" <atmaking@hotmail.com>
• Re: ATM Removable bearings for a dob
  • From: "at making" <atmaking@hotmail.com>
• Re: [bigdob] Re: ATM Removable bearings for a dob
  • From: "at making" <atmaking@hotmail.com>
• ATM clearance in cell for small objective
  • From: ATM@antiquaries.com
• Re: ATM Hogging Out
  • From: "B. Bainbridge" <brianb@u.washington.edu>
• Re: ATM Hogging Out -making flats????
  • From: "B. Bainbridge" <brianb@u.washington.edu>
• RE: ATM First Light (sort of) with my 10" F-6 Dob.
  • From: "Banich, Howard" <Howard.Banich@nike.com>
• RE: ATM Round Two
  • From: "Banich, Howard" <Howard.Banich@nike.com>
• ATM Real Time Automated Foucault Tester
  • From: "Bawden, Michael" <Michael.Bawden@spr.gases.boc.com>
• RE: ATM Spider Advice
  • From: "Bawden, Michael" <Michael.Bawden@spr.gases.boc.com>
• ATM did I miss something, where are the archives...
  • From: "benoit schillings" <benoit_schillings@hotmail.com>
• ATM self contained vibration damper....
  • From: "benoit schillings" <benoit_schillings@hotmail.com>
• Re: ATM self contained vibration damper....
  • From: "benoit schillings" <benoit_schillings@hotmail.com>
• Re: ATM self contained vibration damper....
  • From: "benoit schillings" <benoit_schillings@hotmail.com>
• Re: ATM self contained vibration damper....
  • From: "benoit schillings" <benoit_schillings@hotmail.com>
• Re: ATM self contained vibration damper....
  • From: "benoit schillings" <benoit_schillings@hotmail.com>
• Re: ATM self contained vibration damper....
  • From: "benoit schillings" <benoit_schillings@hotmail.com>
• ATM Hogging Out
  • From: "Bill Kelley" <flex@commspeed.net>
• ATM Hogging Out
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: ATM Re: Why?
  • From: Bill Marriott <btk@pacbell.net>
• Re: ATM Restoring an old Coude refractor
  • From: Bill Marriott <btk@pacbell.net>
• Re: ATM BVC Glass
  • From: "Bill Prewitt" <bprewitt@neo.rr.com>
• Re: ATM "Tuning" a wire spider?
  • From: "Bill Prewitt" <bprewitt@neo.rr.com>
• Re: ATM pitch hardness
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM Dented squares
  • From: "Bill T." <twentiethwave@hotmail.com>
• RE: ATM Exit Pupil Question
  • From: "Bill T." <twentiethwave@hotmail.com>
• Re: ATM Foucault tester
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM OT, Hiding scratches in plate class windows?
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Foucault tester
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Foucault tester
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Fixed vs Moving source
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Fixed vs Moving source
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Foucault tester - Expanding the Thread
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM pitch hardness
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Hogging Out
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Majic reapperang pits
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Cassegrain as second telescope project.
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Hogging Out -making flats????
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM First Ronchi test
  • From: "Bob May" <bobmay@nethere.com>
• Re: Re:ATM Cassegrain as second telescope project.
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM First Ronchi test
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Hogging Out -making flats????
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Foucault failure at F/4 : Why?
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Power Supply
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Hogging Out -making flats????
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Fine Grinding/Polishing an F4.7
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Cassegrain as 2nd project / optics calculations
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Dented squares
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Astigmatic zone
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Power Supply
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Digital Caliper
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Real Time Automated Foucault Tester
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Real Time Automated Foucault Tester
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Why?
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Why?
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Light colour vs effect on night vision
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Chris Tennant
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Polishing & TDE
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Almost done polishing
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Question to the list members: Re best use of polishing pads
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Question to the list members: Re best use of polishing pads
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM polishing question
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM First Light (sort of) with my 10" F-6 Dob.
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM PLOP question
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM taper talk
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Star diagonal alignment
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Round Two
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Exit Pupil Question
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Restoring an old Coude refractor
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Building a clutch
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM self contained vibration damper....
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM self contained vibration damper....
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Restoring an old Coude refractor
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM RE: ATN Diffraction ring and TDE
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Fine Grinding (lenses)
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM going too darker skies
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM self contained vibration damper....
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Restoring a 6"coude- Another question
  • From: "Bob May" <bobmay@nethere.com>
• Re: ATM Adhesion of Flocked Paper
  • From: "Bob May" <bobmay@nethere.com>
• Subject: ATM Is the list working?
  • From: "Bob Walker" <tac@i1.net>
• Subject: ATM Dented squares
  • From: "Bob Walker" <tac@i1.net>
• Subject: ATM Hogging Out -making flats????
  • From: "Bob Walker" <tac@i1.net>
• Re:ATM Grinding machine with sliding turntable
  • From: "Bob Walker" <tac@i1.net>
• ATM Re: wire spider tuning
  • From: "Bob Walker" <tac@i1.net>
• ATM Star diagonal alignment
  • From: "Bob Walker" <tac@i1.net>
• ATM Foucault tester - Expanding the Thread
  • From: Brad <brad@escapees.com>
• Re: ATM OT but...
  • From: Brad <brad@escapees.com>
• Re: ATM tester dial jpeg
  • From: Brad <brad@escapees.com>
• Re: ATM Restoring an old Coude refractor
  • From: Brad <brad@escapees.com>
• Re: ATM Polishing & TDE
  • From: Brad Davy <bdavy@fred.net>
• Re: ATM Welding, TIG and MIG (was rolling a tube)
  • From: Brian <blast@aloha.net>
• Re: ATM Hogging Out -making flats - Marshmellows
  • From: "Cary@SciTech" <Cary@SciTechAstro.com>
• Re: ATM Why? Thinking - AHHHHH!!!
  • From: "Cary@SciTech" <Cary@SciTechAstro.com>
• Re: ATM Sunspot test: A cruel joke?
  • From: "Cary@SciTech" <Cary@SciTechAstro.com>
• Re: ATM Which colour
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM Removable bearings for a dob
  • From: Chuck Dethloff <telmor@teleport.com>
• Re: ATM Re: Low Profile Focuser
  • From: "clement.focuser" <clement.focuser@verizon.net>
• ATM NPR Stellafane
  • From: "clement.focuser" <clement.focuser@verizon.net>
• Re: ATM Spider Advice
  • From: "clement.focuser" <clement.focuser@verizon.net>
• Re: ATM "Tuning" a wire spider?
  • From: "clement.focuser" <clement.focuser@verizon.net>
• Re: ATM Almost done polishing
  • From: "clement.focuser" <clement.focuser@verizon.net>
• Re: ATM Building a clutch
  • From: "clement.focuser" <clement.focuser@verizon.net>
• ATM Re: Sky baffle concept for folded scope
  • From: Clive Milne <milnecd@yahoo.com>
• Re: ATM Spider Advice
  • From: Clive Milne <milnecd@yahoo.com>
• ATM Re: Tuning a wire spider.
  • From: Clive Milne <milnecd@yahoo.com>
• ATM Re: did I miss something, where are the archives...
  • From: Clive Milne <milnecd@yahoo.com>
• ATM Re: Dall-Kirkham: Baffles and Secondary Magnification
  • From: Clive Milne <milnecd@yahoo.com>
• RE: ATM Magic reappearing pits
  • From: "CSC" <optic@gwi.net>
• RE: ATM First Ronchi test
  • From: "CSC" <optic@gwi.net>
• ATM FW: correcting your doublet
  • From: "CSC" <optic@gwi.net>
• RE: ATM astigmic mirror.
  • From: "CSC" <optic@gwi.net>
• ATM testing a flat for autocollimation
  • From: "CSC" <optic@gwi.net>
• RE: ATM SiC or AlO
  • From: "CSC" <optic@gwi.net>
• RE: ATM How small a secondary is useful
  • From: "CSC" <optic@gwi.net>
• RE: ATM testing a flat for autocollimation
  • From: "CSC" <optic@gwi.net>
• FW: ATM testing a flat for autocollimation
  • From: "CSC" <optic@gwi.net>
• ATM RE: testing flats
  • From: "CSC" <optic@gwi.net>
• RE: ATM astigmic mirror.
  • From: "CSC" <optic@gwi.net>
• RE: ATM Autocollimation Testing via Flats
  • From: "CSC" <optic@gwi.net>
• RE: ATM Another Update
  • From: "CSC" <optic@gwi.net>
• RE: ATM rough grinding 16"x1" plate
  • From: "CSC" <optic@gwi.net>
• RE: ATM Naked Eye Visibility of Turned Edge?
  • From: "CSC" <optic@gwi.net>
• FW: ATM Naked Eye Visibility of Turned Edge?
  • From: "CSC" <optic@gwi.net>
• RE: ATM Exit Pupil Question
  • From: "CSC" <optic@gwi.net>
• RE: ATM Restoring an old Coude refractor
  • From: "CSC" <optic@gwi.net>
• RE: ATM Effective contrast aperture
  • From: "CSC" <optic@gwi.net>
• RE: ATM Round Two
  • From: "CSC" <optic@gwi.net>
• RE: ATM Diffraction ring and TDE
  • From: "CSC" <optic@gwi.net>
• RE: ATM Picking up where I left off on 12.5" plate mirror
  • From: "CSC" <optic@gwi.net>
• RE: Oversize lap (was: Re: ATM Picking up where I left off on 12.5" plate mirror)
  • From: "CSC" <optic@gwi.net>
• ATM Power Supply
  • From: CT <chucktaylor@speakeasy.net>
• ATM Micrometer Head
  • From: "D. Ray East" <dr.east@usa.net>
• Re: ATM self contained vibration damper....
  • From: "Dale Campbell" <campbeld@advion.com>
• Re: ATM Treaded inserts.
  • From: "Damian Kruger" <djkruger@mpx.com.au>
• ATM Re: Threaded inserts.
  • From: "Damian Kruger" <djkruger@mpx.com.au>
• ATM Re: Yet another design
  • From: "Dan Chaffee" <dchaffee@blitz-it.net>
• ATM Re: Fine Grinding (lenses)
  • From: "Dan Chaffee" <dchaffee@blitz-it.net>
• Re: ATMer airport story
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM Spider Advice
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM Spider Advice
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM Adhesion of Flocked Paper
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: ATM First lap poured
  • From: "Dave McCarter" <dmccarter@sympatico.ca>
• Re: ATM BVC Glass
  • From: "Dave McCarter" <dmccarter@sympatico.ca>
• Re: ATM Building a clutch
  • From: "Dave Pitou" <dpitou@ix.netcom.com>
• ATM Diagonal sizing program
  • From: "Dave Richardson" <yickityoptorus@hotmail.com>
• Re: ATM Diagonal sizing program
  • From: "Dave Richardson" <yickityoptorus@hotmail.com>
• Re: ATM Diagonal sizing program
  • From: "Dave Richardson" <yickityoptorus@hotmail.com>
• ATM Picking up where I left off on 12.5" plate mirror
  • From: Dave Strout <dstrout@linuxfoundary.com>
• Re: ATM Low Profile Focuser
  • From: "David H. Bevel" <davebevel@mindspring.com>
• ATM Real Time Automated Foucault Test
  • From: "David H. Bevel" <davebevel@mindspring.com>
• Re: ATM Real Time Automated Foucault Test
  • From: "David H. Bevel" <davebevel@mindspring.com>
• ATM Real Time Automated Foucault Test
  • From: "David H. Bevel" <davebevel@mindspring.com>
• Re: ATM Spherometer Formula
  • From: "David H. Bevel" <davebevel@mindspring.com>
• Re: ATM Real Time Automated Foucault Tester
  • From: "David H. Bevel" <davebevel@mindspring.com>
• Re: ATM Why?
  • From: "David H. Bevel" <davebevel@mindspring.com>
• Re: ATM Real Time Automated Foucault Tester
  • From: "David H. Bevel" <davebevel@mindspring.com>
• Re: ATM Real Time Automated Foucault Tester
  • From: "David H. Bevel" <davebevel@mindspring.com>
• Re: ATM Real Time Automated Foucault Tester
  • From: "David H. Bevel" <davebevel@mindspring.com>
• Re: ATM PLOP question
  • From: david lewis <lewis@eecg.toronto.edu>
• Re: ATM Hogging Out
  • From: "David M . Bourgeois" <dbourgeo@thezone.net>
• Re: ATM Hogging Out -making flats????
  • From: "David M . Bourgeois" <dbourgeo@thezone.net>
• Re: ATM Hogging Out -making flats????
  • From: "David M . Bourgeois" <dbourgeo@thezone.net>
• Re: ATM Hogging Out -making flats????
  • From: "David M . Bourgeois" <dbourgeo@thezone.net>
• ATM Welding, TIG and MIG (was rolling a tube)
  • From: Del Stanton <sd20@earthlink.net>
• Re: ATM rolling a tube
  • From: Del Stanton <sd20@earthlink.net>
• Re: ATM OT, Hiding scratches in plate class windows?
  • From: Dennis Rech <dennisrech@mirror-o-matic.com>
• ATM Spider Advice
  • From: Dennis Woos <wooscons@sover.net>
• Re: ATM Mirr-O-Matic
  • From: "Deon Engelmann" <engelmannd@icon.co.za>
• Re: ATM Why?
  • From: Dominic-Luc Webb <Dominic.Luc-Webb@molmed.ki.se>
• RE: ATM Why?
  • From: Dominic-Luc Webb <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Why?
  • From: Dominic-Luc Webb <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Why?
  • From: Dominic-Luc Webb <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM SiC or AlO
  • From: Dominic-Luc Webb <Dominic.Luc-Webb@molmed.ki.se>
• Re: ATM Which colour
  • From: Dominic-Luc Webb <Dominic.Luc-Webb@molmed.ki.se>
• ATM Low Profile Focuser
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: ATM Building a clutch
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: ATM self contained vibration damper....
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: ATM self contained vibration damper....
  • From: "Don Clement" <clement.focuser@verizon.net>
• ATM Chemical Silvering Cost?
  • From: Douglas Braun <doug@dougbraun.com>
• RE: ATM Foucault tester
  • From: Douglas Braun <doug@dougbraun.com>
• Re: ATM Digital Caliper
  • From: Douglas Braun <doug@dougbraun.com>
• Re: ATM Foucault tester
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• Re: ATM Foucault tester
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• RE: ATM Foucault tester
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• RE: ATM Foucault tester
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• RE: ATM Foucault tester
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• Re: ATM Trying out the lateral wire test
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• Re: ATM Foucault failure at F/4 : Why?
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• Re: ATM Hogging Out - making flats???
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• Re: ATM Spider Advice
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• Re: ATM "Tuning" a wire spider?
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• Re: ATM Which colour
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• Re: ATM Which colour
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• Re: ATM Encoder shaft diameter?
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• Re: ATM Naked Eye Visibility of Turned Edge?
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• Re: ATM Star diagonal alignment
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• RE: ATM Naked Eye Visibility of Turned Edge?
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• RE: ATM Star diagonal alignment, A possible explanation.....
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• Re: ATM self contained vibration damper....
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• Re: ATM Exit Pupil Question
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• Re: ATM Exit Pupil Question
  • From: "Dwight K. Elvey" <dwightk.elvey@amd.com>
• ATM Sky baffle concept for folded scope (and carbon fiber notes.)
  • From: Ed Taychert <elt@irony.com>
• ATM Re: Sky baffle concept for folded scope (and carbon fiber notes.)
  • From: Ed Taychert <elt@irony.com>
• Re: ATM Spider Advice
  • From: Ed Taychert <elt@irony.com>
• ATM I had some luck with "clampless clamps"
  • From: Ed Taychert <elt@irony.com>
• ATM Treaded inserts.
  • From: "Eddie" <roca5@bigpond.com>
• ATM Astigmatic zone
  • From: "francis milsom" <francis@milsom.clara.co.uk>
• Re:ATM Cassegrain as second telescope project.
  • From: Frank Henriquez <frank@ucla.edu>
• ATM pitch hardness
  • From: "Frans Franssen" <fjfstars@brunssum.net>
• RE: ATM pitch hardness
  • From: "Frans Franssen" <fjfstars@brunssum.net>
• Re: ATM Chemical Silvering Cost?
  • From: "Galogaza" <elizabeta.galogaza@siol.net>
• Re: ATM Hogging Out -making flats????
  • From: "Galogaza" <elizabeta.galogaza@siol.net>
• ATM Chris Tennant
  • From: "Galogaza" <elizabeta.galogaza@siol.net>
• Re: ATM Almost done polishing
  • From: "Galogaza" <elizabeta.galogaza@siol.net>
• Re: ATM Almost done polishing
  • From: "Galogaza" <elizabeta.galogaza@siol.net>
• Re: ATM Almost done polishing
  • From: "Galogaza" <elizabeta.galogaza@siol.net>
• ATM SiC or AlO
  • From: "Galogaza" <elizabeta.galogaza@siol.net>
• Re: ATM Caustic Tester
  • From: "Galogaza" <elizabeta.galogaza@siol.net>
• ATM MOT or TOT for polishing
  • From: GGnSG1@aol.com
• ATM Content sought for Flexmirror web site
  • From: Gil McFarlane <gilboastro@yahoo.com>
• RE: ATM Rotational Damper
  • From: "Good, Donald" <dgood@aha.org>
• : Re: ATM Cassegrain as 2nd project / optics calculations
  • From: GregJ888@aol.com
• ATM Fwd: Why?
  • From: GregJ888@aol.com
• ATM Re: Why?
  • From: GregJ888@aol.com
• ATM Stepper Motor
  • From: "Grzegorz Koralewski" <eeeeeeee@interia.pl>
• Re: ATM Hogging Out
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• Re: ATM Foucault tester - Expanding the Thread
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• ATM progress at NCA scope-making group
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• ATM Re: [capitalastronomers] progress at NCA scope-making group
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• Re: ATM Restoring an old Coude refractor
  • From: Guy Brandenburg <gfbranden@earthlink.net>
• Re: ATM pitch hardness
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Hogging Out
  • From: Hermit <klowther@cisnet.com>
• Re: ATMer airport story
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Hogging Out -making flats????
  • From: Hermit <klowther@cisnet.com>
• Re: ATM Spherometer Formula
  • From: Hermit <klowther@cisnet.com>
• ATM stiffening for cardboard
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• ATM taper talk
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• ATM more in the clutches
  • From: Ina Ron Lippard Renaissance Reproductions <renrepro@surfglobal.net>
• Re: ATM LED questions
  • From: "J&S" <jsstars@worldnet.att.net>
• Re: ATM Dall Kirkham
  • From: "J&S" <jsstars@worldnet.att.net>
• ATM new e-mail address
  • From: jamaury@space.com
• Re: ATM Real Time Automated Foucault Test
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM Real Time Automated Foucault Test
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM Real Time Automated Foucault Tester
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM Real Time Automated Foucault Tester
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM Recent Glass Pushing
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM rough grinding 16"x1" plate
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• Re: ATM Diffraction ring and TDE
  • From: "James Lerch" <jlerch1@tampabay.rr.com>
• ATM Mirror grinder update
  • From: James P Crombie <jpcrombie@pei.eastlink.ca>
• ATM Re: Low Profile Focuser
  • From: James P Crombie <jpcrombie@pei.eastlink.ca>
• Re: ATMer Airport story
  • From: James P Crombie <jpcrombie@pei.eastlink.ca>
• RE: ATM Foucault tester
  • From: "James Taylor" <u2pilot@satx.rr.com>
• RE: ATM Foucault tester
  • From: "James Taylor" <u2pilot@satx.rr.com>
• ATMer airport story
  • From: "James Taylor" <u2pilot@satx.rr.com>
• ATM PLOP result question
  • From: "James Taylor" <u2pilot@satx.rr.com>
• RE: ATM Spider Advice
  • From: "James Taylor" <u2pilot@satx.rr.com>
• RE: ATM Spider Advice
  • From: "James Taylor" <u2pilot@satx.rr.com>
• Re: ATM Trying out the lateral wire test
  • From: "James W. Burrows" <burrjaw@earthlink.net>
• Re: ATM Why?
  • From: "James W. Burrows" <burrjaw@earthlink.net>
• Re: ATM Simulating stroke affects
  • From: "James W. Burrows" <burrjaw@earthlink.net>
• Re: ATM Generalized Caustic
  • From: "James W. Burrows" <burrjaw@earthlink.net>
• Re: ATM Naked Eye Visibility of Turned Edge?
  • From: "James W. Burrows" <burrjaw@earthlink.net>
• Re: ATM Caustic Tester
  • From: "James W. Burrows" <burrjaw@earthlink.net>
• Re: ATM Hogging Out
  • From: Jan Bentz <jbentz@inreach.com>
• Re: ATM Dall Kirkham
  • From: Jan Bentz <jbentz@inreach.com>
• ATM Dall Kirkham
  • From: "Jana Jooste" <finalcut@icon.co.za>
• ATM Re: atm-digest V1 #3194, Dall-Kirkham
  • From: Jarvis Krumbein <jkoptic@juno.com>
• RE: ATM Light colour vs effect on night vision
  • From: Jay LeBlanc <jaleblan@dakotacom.net>
• Re: ATM Autocollimation Testing via Flats
  • From: "Jean-Guy Moreau" <jgmoreau@lino.com>
• Re: ATM Hogging Out -making flats????
  • From: "Jerald F. Wright" <wa4guu@bellatlantic.net>
• Re: ATM Dented squares
  • From: "Jerald F. Wright" <wa4guu@bellatlantic.net>
• Re: ATM Spider Advice
  • From: "Jerald F. Wright" <wa4guu@bellatlantic.net>
• Re: ATM Spider Advice
  • From: "Jerald F. Wright" <wa4guu@bellatlantic.net>
• Re: ATM Spider Advice
  • From: "Jerald F. Wright" <wa4guu@bellatlantic.net>
• Re: ATM Need Advice?
  • From: "Jerald F. Wright" <wa4guu@bellatlantic.net>
• Re: ATM Need Advice?
  • From: "Jerald F. Wright" <wa4guu@bellatlantic.net>
• Re: ATM Exit Pupil Question
  • From: "Jerald F. Wright" <wa4guu@bellatlantic.net>
• Re: ATM Exit Pupil Question
  • From: "Jerald F. Wright" <wa4guu@bellatlantic.net>
• Re: ATM Exit Pupil Question
  • From: "Jerald F. Wright" <wa4guu@bellatlantic.net>
• Re: ATM Restoring a 6"coude- Another question
  • From: "Jerald F. Wright" <wa4guu@bellatlantic.net>
• Re: ATM First lap poured
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• ATM enough is enough
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• ATM mirror
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• ATM astigmic mirror.
  • From: "Jerry B. Hillman" <JBHillman@ev1.net>
• ATM Secondary 4pt support dimensions
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM Secondary 4pt support dimensions
  • From: "Jim Miller" <jim@jtmiller.com>
• Fw: ATM Treaded inserts.
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM PLOP result question
  • From: "Jim Miller" <jim@jtmiller.com>
• Fw: ATM Light colour vs effect on night vision
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM Light colour vs effect on night vision
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM Spider Advice
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM mirror
  • From: "Jim Miller" <jim@jtmiller.com>
• ATM Secondary Heater Idea
  • From: "Jim Miller" <jim@jtmiller.com>
• ATM "Tuning" a wire spider?
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM "Tuning" a wire spider?
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM "Tuning" a wire spider?
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM "Tuning" a wire spider?
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM How small a secondary is useful
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM How small a secondary is useful
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM Encoder shaft diameter?
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM self contained vibration damper....
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM self contained vibration damper....
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM self contained vibration damper....
  • From: "Jim Miller" <jim@jtmiller.com>
• Re: ATM Adhesion of Flocked Paper
  • From: "Jim Miller" <jim@jtmiller.com>
• ATM Is the list working?
  • From: Joe Campbell <joe@esper.com>
• ATM 19 scopes in 3 hours (Update)
  • From: Joe Campbell <joe@esper.com>
• Re: ATM Almost done polishing
  • From: Joe Mayenschein <mayen1@mwt.net>
• ATM Where is our moderator?
  • From: Joe Mayenschein <mayen1@mwt.net>
• ATM Size differences txt vs html
  • From: Joe Mayenschein <mayen1@mwt.net>
• ATM oblate ellipsoid - not speroid - not parabola
  • From: "Johanne Roy" <joan@axeinformatique.com>
• Re: ATM Detailed Smoothing Operation
  • From: "John D. Upton" <jd-upton@texas.net>
• Re: ATM Question to the list members: Re best use of polishing pads
  • From: "John D. Upton" <jd-upton@texas.net>
• ATM Naked Eye Visibility of Turned Edge?
  • From: "John D. Upton" <jd-upton@texas.net>
• Re: ATM Naked Eye Visibility of Turned Edge?
  • From: "John D. Upton" <jd-upton@texas.net>
• RE: ATM Naked Eye Visibility of Turned Edge?
  • From: "John D. Upton" <jd-upton@texas.net>
• Re: ATM Naked Eye Visibility of Turned Edge?
  • From: "John D. Upton" <jd-upton@texas.net>
• RE: ATM Naked Eye Visibility of Turned Edge?
  • From: "John D. Upton" <jd-upton@texas.net>
• Re: ATM SiC or AlO
  • From: "John Lynch" <john_p_lynch@hotmail.com>
• Re: ATM Is the list working?
  • From: "John Sherman" <shermj@netzero.net>
• Re: ATM Almost done polishing
  • From: Joseph Goins <jb_goins@yahoo.com>
• Re: ATM Foucault tester - Expanding the Thread
  • From: jsgrmfg@gracemfg.com
• ATM First Ronchi test
  • From: jsgrmfg@gracemfg.com
• ATM Trying out the lateral wire test
  • From: jsgrmfg@gracemfg.com
• Re: ATM Hogging Out - making flats???
  • From: jsgrmfg@gracemfg.com
• ATM Diffraction ring and TDE
  • From: jsgrmfg@gracemfg.com
• RE: ATM Diffraction ring and TDE
  • From: jsgrmfg@gracemfg.com
• ATM RE: ATN Diffraction ring and TDE
  • From: jsgrmfg@gracemfg.com
• Re: ATM Diffraction ring and TDE
  • From: jsgrmfg@gracemfg.com
• ATM Remove
  • From: "Justin Anderson - SAS(EDS)" <Janderson@SAS.Samsung.com>
• Re: ATM Foucault tester
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Hogging Out
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Hogging Out
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM First Ronchi test
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Hogging Out -making flats????
  • From: "Ken Hunter" <kb7h@onemain.com>
• ATM Pits and Sharpie test
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Stellarfane web page
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Hogging Out -making flats????
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: Re:ATM Cassegrain as second telescope project.
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Power Supply
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Hogging Out -making flats????
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Hogging Out -making flats????
  • From: "Ken Hunter"<kb7h@onemain.com>
• Re: ATM Hogging Out -making flats????
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Hogging Out -making flats????
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Hogging Out - making flats???
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM PLOP result question
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Temperatures of mirror when aluminizing
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Spider Advice
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Generalized Caustic
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM mirror
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Almost done polishing
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Detailed Smoothing Operation
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Question to the list members: Re best use of polishing pads
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Size differences txt vs html
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM testing a flat for autocollimation
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM polishing question
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM rough grinding 16"x1" plate
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM Encoder shaft diameter?
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM self contained vibration damper....
  • From: "Ken Hunter" <kb7h@onemain.com>
• Re: ATM gooey pitch
  • From: "Ken Hunter"<kb7h@onemain.com>
• ATM Fine Grinding/Polishing an F4.7
  • From: kenneth durkin <kennethdurkin@yahoo.com>
• Re: ATM Fine Grinding/Polishing an F4.7
  • From: kenneth durkin <kennethdurkin@yahoo.com>
• ATM Robo Foucault under Windows NT
  • From: martin.cibulski@t-online.de (Kerstin Cibulski)
• Re: ATM Cassegrain as 2nd project / optics calculations
  • From: Kevin McEnhill <mcenhillk@mac.com>
• Re:ATM Cassegrain as second telescope project.
  • From: kwhitefire@juno.com
• Re:ATM Majic reapperang pits
  • From: kwhitefire@juno.com
• RE: ATM Restoring an old Coude refractor
  • From: "Launie, Kenneth J" <LAUNIEK@polaroid.com>
• ATM Foucault failure at F/4 : Why?
  • From: Lawrence Sayre <lsayre@apk.net>
• ATM Temperatures of mirror when aluminizing
  • From: Leftfieldstar@aol.com
• Re: ATM Temperatures of mirror when aluminizing
  • From: Leftfieldstar@aol.com
• ATM CONTOUR image
  • From: Leftfieldstar@aol.com
• ATM auroral show
  • From: Leftfieldstar@aol.com
• Re: ATM Re: did I miss something, where are the archives...
  • From: Leftfieldstar@aol.com
• Re: ATM Effective contrast aperture
  • From: Leftfieldstar@aol.com
• ATM TEST ONLY NO CONTENT
  • From: Leftfieldstar@aol.com
• Re: ATM Foucault tester - Expanding the Thread
  • From: lifedata@vol.com
• Re: ATM Hogging Out
  • From: lifedata@vol.com
• Re: ATM 9 point cell
  • From: lifedata@vol.com
• Re: ATM Dented squares
  • From: lifedata@vol.com
• Re: ATM Diagonal sizing program
  • From: lifedata@vol.com
• ATM Crazy hogging idea.
  • From: lifedata@vol.com
• Re: ATM Temperatures of mirror when aluminizing
  • From: lifedata@vol.com
• Re: ATM focal ratio costs/effects
  • From: lifedata@vol.com
• Re: ATM Almost done polishing
  • From: lifedata@vol.com
• Re: ATM Almost done polishing
  • From: lifedata@vol.com
• Re: ATM Almost done polishing
  • From: lifedata@vol.com
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• Re: ATM Spider Advice
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: ATM Spider Advice
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: ATM Spider Advice
  • From: Mark Cowan <toolontop@yahoo.com>
• RE: ATM SiC or AlO
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: ATM Diffraction ring and TDE
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: ATM gooey pitch
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: ATM Sunspot test: A cruel joke?
  • From: Mark Cowan <toolontop@yahoo.com>
• Re: ATM 9 point cell
  • From: Mark Holm <mdholm@telerama.com>
• Re: ATM PLOP result question
  • From: Mark Holm <mdholm@telerama.com>
• Re: ATM mirror
  • From: Mark Holm <mdholm@telerama.com>
• ATM Re: [bigdob] Removable bearings for a dob
  • From: Mark Holm <mdholm@telerama.com>
• Re: ATM PLOP question
  • From: Mark Holm <mdholm@telerama.com>
• Re: ATM PLOP question
  • From: Mark Holm <mdholm@telerama.com>
• Re: ATM PLOP question
  • From: Mark Holm <mdholm@telerama.com>
• ATM divided truss tubes: did I see them here?
  • From: Mark Holm <mdholm@telerama.com>
• Re: ATM PLOP result question
  • From: Mark Suchting <masuch@cia.com.au>
• ATM Grinding machine with sliding turntable
  • From: martin.cibulski@t-online.de (Martin Cibulski)
• ATM Grinding Machine with sliding turntable, corrected URL
  • From: martin.cibulski@t-online.de (Martin Cibulski)
• Re: ATM Lateral wire test question
  • From: Marty.T@t-online.de (Martin Trittelvitz)
• Re: ATM testing a flat for autocollimation
  • From: Marty.T@t-online.de (Martin Trittelvitz)
• RE: ATM How small a secondary is useful
  • From: "Martyn, Andrew" <martyn@rlmsystems.com.au>
• ATM Pages updated
  • From: "Matt Considine" <matt@considine.net>
• RE: ATM Light colour vs effect on night vision
  • From: "Matt Marulla" <matt@astronomydaily.com>
• Re: ATM PLOP result question
  • From: mdholm@telerama.com
• Re: ATM PLOP result question
  • From: mdholm@telerama.com
• Re: ATM newbie way forward
  • From: "Mel Bartels" <mbartels@efn.org>
• Re: ATM Sky baffle concept for folded scope (and carbon fiber notes.)
  • From: "Mel Bartels" <mbartels@efn.org>
• Re: ATM Star Test - How good is good enough?
  • From: "Mel Bartels" <mbartels@efn.org>
• Re: ATM Sky baffle concept for folded scope (and carbon fiber notes.)
  • From: "Mel Bartels" <mbartels@efn.org>
• Re: ATM Is the list working?
  • From: "Mel Bartels" <mbartels@efn.org>
• Re: ATM First Ronchi test
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM 9 point cell
  • From: "Mel Bartels" <mbartels@efn.org>
• Re: ATM Foucault failure at F/4 : Why?
  • From: "Mel Bartels" <mbartels@efn.org>
• Re: ATM focal ratio costs/effects
  • From: "Mel Bartels" <mbartels@efn.org>
• Re: ATM Spider Advice
  • From: "Mel Bartels" <mbartels@efn.org>
• Re: ATM focal ratio costs/effects
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM How small a secondary is useful
  • From: "Mel Bartels" <mbartels@efn.org>
• Re: ATM Which colour
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Which colour
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Removable bearings for a dob
  • From: Mel Bartels <mbartels@efn.org>
• Re: ATM Exit Pupil Question
  • From: "Mel Bartels" <mbartels@efn.org>
• Re: ATM self contained vibration damper....
  • From: "Mel Bartels" <mbartels@efn.org>
• Re: ATM Effective contrast aperture
  • From: "Mel Bartels" <mbartels@efn.org>
• Re: ATM Dall Kirkham
  • From: "Mel Bartels" <mbartels@efn.org>
• Re: ATM self contained vibration damper....
  • From: "Mel Bartels" <mbartels@efn.org>
• ATM First lap poured
  • From: "Michael Burr" <mtburr@msn.com>
• ATM Dented squares
  • From: "Michael Burr" <mtburr@msn.com>
• ATM Update-First Lap OK!
  • From: "Michael Burr" <mtburr@msn.com>
• ATM tester dial jpeg
  • From: "Michael Burr" <mtburr@msn.com>
• New Minnesota ATM group
  • From: "Michael Burr" <mtburr@msn.com>
• ATM Almost done polishing
  • From: "Michael Burr" <mtburr@msn.com>
• ATM Another Update
  • From: "Michael Burr" <mtburr@msn.com>
• ATM gooey pitch
  • From: "Michael Burr" <mtburr@msn.com>
• ATM more gooey pitch
  • From: "Michael Burr" <mtburr@msn.com>
• Re: ATM more gooey pitch
  • From: "Michael Burr" <mtburr@msn.com>
• ATM Sunspot test: A cruel joke?
  • From: "Michael Burr" <mtburr@msn.com>
• ATM Spherometer Formula
  • From: Michael Lindner <mikell@optonline.net>
• Re: ATM Spherometer Formula
  • From: Michael Lindner <mikell@optonline.net>
• Re: ATM Spherometer Formula
  • From: Michael Lindner <mikell@optonline.net>
• Re: ATM Removable bearings for a dob
  • From: Michael Lindner <mikell@optonline.net>
• Re: ATM Cassegrain as second telescope project.
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re:ATM Cassegrain as second telescope project.
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: ATM Why?
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: ATM Why?
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: ATM Why?
  • From: Michael Peck <mpeck1@ix.netcom.com>
• Re: ATM Re: Why?
  • From: Michael Peck <mpeck1@ix.netcom.com>
• ATM OSLO LT works under wine on linux
  • From: Michael Peck <mpeck1@ix.netcom.com>
• ATM Star Test - How good is good enough?
  • From: "Mike and Sara" <maheald@octa4.net.au>
• ATM Dall Kirkham
  • From: "Mike and Sara" <maheald@octa4.net.au>
• Re: ATM mirror
  • From: "Mike Spooner" <spoon@PageAmerica.net>
• Re: ATM Foucault tester
  • From: Mike Warne <warne@lava.net>
• Re: ATM Atming in a movie!!!! -- and on Zoom
  • From: Mike Warne <warne@lava.net>
• Re: ATM divided truss tubes: did I see them here?
  • From: Mike Warne <warne@lava.net>
• ATM Real Time Automated Foucault Tester
  • From: Mimas@aol.com
• Re: ATM Real Time Automated Foucault Tester
  • From: Mimas@aol.com
• Re: ATM Real Time Automated Foucault Tester
  • From: Mimas@aol.com
• Re: ATM Hogging Out -making flats????
  • From: MLThiebaux <mlt@ns.sympatico.ca>
• ATM Hogging Out -making flats????
  • From: MLThiebaux <mlt@ns.sympatico.ca>
• Re: ATM Spherometer Formula
  • From: MLThiebaux <mlt@ns.sympatico.ca>
• Re: ATM Spherometer Formula
  • From: MLThiebaux <mlt@ns.sympatico.ca>
• Re: ATM Generalized Caustic
  • From: MLThiebaux <mlt@ns.sympatico.ca>
• Re: ATM Generalized Caustic
  • From: MLThiebaux <mlt@ns.sympatico.ca>
• Re: ATM "Tuning" a wire spider?
  • From: MLThiebaux <mlt@ns.sympatico.ca>
• Re: ATM Exit Pupil Question
  • From: MLThiebaux <mlt@ns.sympatico.ca>
• Re: ATM Restoring an old Coude refractor
  • From: MPSeiler@aol.com
• ATM Polishing & TDE
  • From: mtburr@msn.com
• Re: ATM Hogging Out
  • From: "Mutalib Abdallah" <omegatroid@hotmail.com>
• ATM Comatose Free Field
  • From: "Mutalib Abdallah" <omegatroid@hotmail.com>
• Re: ATM WARNING to group re AOL
  • From: Myosin@aol.com
• Re: ATM please help re-connect
  • From: Myosin@aol.com
• ATM Atming in a movie!!!!
  • From: "Nathan D. Spaulding" <scopemaker@surfglobal.net>
• Re: ATM Atming in a movie!!!!
  • From: "Nathan D. Spaulding" <scopemaker@surfglobal.net>
• Re: ATM How make a cardboard tube stiffer ?
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM Spider Advice
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM Which colour
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM Which colour
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM Exit Pupil Question
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM Effective contrast aperture
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: ATM Welding, TIG and MIG (was rolling a tube)
  • From: "Patrik Henriksson" <dixieswede@adelphia.net>
• Re: ATM Hogging Out -making flats????
  • From: Paul Cousoulis <paulcsouls@worldnet.att.net>
• Re: ATM Hogging Out -making flats????
  • From: Paul Cousoulis <paulcsouls@worldnet.att.net>
• Re: ATM Hogging Out -making flats????
  • From: Paul Cousoulis <paulcsouls@worldnet.att.net>
• Re: ATM Hogging Out
  • From: "pdk" <pdk@tampabay.rr.com>
• Re: ATM Hogging Out -making flats????
  • From: "pdk" <pdk@tampabay.rr.com>
• ATM Simulating stroke affects
  • From: "PDK" <pdk@tampabay.rr.com>
• ATM remove
  • From: "Peter" <kitgears@kitgear.com>
• ATM Adhesion of Flocked Paper
  • From: "Peter" <peter@kitgear.com>
• RE: ATM Adhesion of Flocked Paper
  • From: "Peter" <peter@kitgear.com>
• Re: ATM Naked Eye Visibility of Turned Edge?
  • From: "Peter John Smith" <pjifl@bigpond.com.au>
• Re: ATM First Light (sort of) with my 10" F-6 Dob.
  • From: Phil Marcus <pmarcus@swbell.net>
• ATM polishing question
  • From: "Pieter Meyer" <pmeyer@postillion.up.ac.za>
• Re: ATM testing a flat for autocollimation
  • From: Ric Rokosz <radicell2@yahoo.com>
• Re: ATM Recent Glass Pushing
  • From: Ric Rokosz <radicell2@yahoo.com>
• ATM Looking for pirex glass in South America
  • From: Ricardo Dunna <rdunna@infolink.com.br>
• ATM Remove
  • From: "Rice, Michael" <mrice@deltagen.com>
• ATM Yet another design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: ATM Re: Yet another design
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: ATM Spherometer Formula
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: ATM Almost done polishing
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• ATM PLOP question
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: ATM PLOP question
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: ATM PLOP question
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: ATM PLOP question
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: ATM PLOP question
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• ATM Fine Grinding (lenses)
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: ATM Fine Grinding (lenses)
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re:ATM Cassegrain as second telescope project.
  • From: Richard Foulk <richard@skydive1.com>
• Re:ATM Cassegrain as second telescope project.
  • From: Richard Foulk <richard@skydive1.com>
• Re: ATM Hogging Out -making flats???? - composites?
  • From: Richard Foulk <richard@skydive1.com>
• Re: ATM Spider Advice
  • From: Richard Foulk <richard@skydive1.com>
• RE: ATM self contained vibration damper....
  • From: "Richard Klappal" <klappal@xnet.com>
• RE: ATM Treaded inserts.
  • From: "Richard Ozer" <rozer@ois-online.com>
• Re: ATM BVC Glass
  • From: "Richard Ozer" <rozer@ois-online.com>
• Re: ATM oblate ellipsoid - not speroid - not parabola
  • From: "Richard Ozer" <rozer@ois-online.com>
• ATM Why?
  • From: "Richard Schwartz" <richas@earthlink.net>
• RE: ATM Why?
  • From: "Richard Schwartz" <richas@earthlink.net>
• RE: ATM Naked Eye Visibility of Turned Edge?
  • From: "Richard Schwartz" <richas@earthlink.net>
• Re: ATM MOT or TOT for polishing
  • From: Rick Maillet <bucko_62@yahoo.com>
• Re: Subject: ATM Is the list working?
  • From: Rick Maillet <bucko_62@yahoo.com>
• Re: ATM Stellarfane web page
  • From: Rick Maillet <bucko_62@yahoo.com>
• Re: ATM Almost done polishing
  • From: Rick Maillet <bucko_62@yahoo.com>
• Re: ATM Spider Advice
  • From: Rick Maillet <bucko_62@yahoo.com>
• ATM Sorry about the hotmail tags.
  • From: Rick Maillet <bucko_62@yahoo.com>
• ATM First Light (sort of) with my 10" F-6 Dob.
  • From: Rick Maillet <bucko_62@yahoo.com>
• ATM Round Two
  • From: Rick Maillet <bucko_62@yahoo.com>
• ATM going too darker skies
  • From: Rick Maillet <bucko_62@yahoo.com>
• Re: ATM more gooey pitch
  • From: Rick Maillet <bucko_62@yahoo.com>
• ATM Majic reapperang pits
  • From: Robert Fifarek <robojun@juno.com>
• ATM Detailed Smoothing Operation
  • From: Robert Fifarek <robojun@juno.com>
• ATM RE: Polishing Pads and Fast Polishing
  • From: Roger Ceragioli <rogerc@as.arizona.edu>
• ATM Autocollimation Testing via Flats
  • From: Roger Ceragioli <rogerc@as.arizona.edu>
• [Fwd: Re: ATM Autocollimation Testing via Flats]
  • From: Roger Ceragioli <rogerc@as.arizona.edu>
• ATM Recent Glass Pushing
  • From: Roger Ceragioli <rogerc@as.arizona.edu>
• RE: ATM Autocollimation Testing via Flats
  • From: Roger Ceragioli <rogerc@as.arizona.edu>
• ATM rough grinding 16"x1" plate
  • From: Ron forrester <rjf@theforrest.org>
• Re: ATM OSLO LT works under wine on linux
  • From: Ron Standage <ron.standage@asml.com>
• ATM Date: Sun, 4 Aug 2002 10:09:40 -0400
  • From: "Sam" <samorawski@3web.net>
• Re: ATM Spider Advice
  • From: "Sam" <samorawski@3web.net>
• ATM BVC Glass
  • From: "Sam" <samorawski@3web.net>
• RE: ATM Temperatures of mirror when aluminizing
  • From: "Sam Michael" <samm@idcomm.com>
• RE: ATM Temperatures of mirror when aluminizing
  • From: "Sam Michael" <samm@idcomm.com>
• ATM Building a clutch
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: ATM Building a clutch
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• Re: ATM Building a clutch
  • From: "Scott Ewart" <scott.e@quicksurfer.com>
• ATM Question to the list members: Re best use of polishing pads
  • From: "Scott Milligan" <starzkey@110.net>
• ATM Response to "best use of polishing pads"
  • From: "Scott Milligan" <starzkey@110.net>
• ATM Introducing myself....again ;)
  • From: "scott rainwater" <funkycrzyshiet@hotmail.com>
• Re: ATM Dall Kirkham
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• ATM Dall Kirkham design and tube
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• Re: ATM Dall Kirkham
  • From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
• ATM newbie way forward
  • From: Scott.Tucker@foodstandards.gsi.gov.uk
• Re: ATM Sky baffle concept for folded scope (and carbon fiber notes.)
  • From: "Shane LaPierre" <shanelapierre@hotmail.com>
• ATM Stellafane: Who's bringing what?
  • From: "Shane LaPierre" <shanelapierre@hotmail.com>
• Re: ATM Stellarfane web page
  • From: "Shane LaPierre" <shanelapierre@hotmail.com>
• ATM Exit Pupil Question
  • From: "Shane LaPierre" <shanelapierre@hotmail.com>
• ATM focal ratio costs/effects
  • From: Shannon Hughes <skhughes98@yahoo.com>
• RE: ATM Generalized Caustic, Simple Algebraic Formula NO CALCULUS!!!
  • From: "Sidor . Kurt" <KSidor@drc.com>
• RE: ATM Generalized Caustic, Simple Algebraic Formula NO CALCULUS!!!
  • From: "Sidor . Kurt" <KSidor@drc.com>
• RE: ATM Star diagonal alignment
  • From: "Sidor . Kurt" <KSidor@drc.com>
• RE: ATM Star diagonal alignment, A possible explanation.....
  • From: "Sidor . Kurt" <KSidor@drc.com>
• Re: ATM self contained vibration damper....Magnesium Alloys?
  • From: "Sidor . Kurt" <KSidor@drc.com>
• ATM OT, Hiding scratches in plate class windows?
  • From: Simon Fourstar <sfourstar@earthlink.net>
• ATM Enhanced coating question
  • From: Simon Fourstar <sfourstar@earthlink.net>
• Re: ATM rolling a tube
  • From: "Stan Kohut" <nutsp@alltel.net>
• Re: ATM Building a clutch
  • From: "Stan Kohut" <nutsp@alltel.net>
• Re: ATM Enhanced coating question
  • From: StarHoper@aol.com
• Re: ATMer airport story
  • From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
• Re: ATM 32" observing reports, close to the end
  • From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
• ATM Re: [bigdob] Removable bearings for a dob
  • From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
• ATM Re: [bigdob] Removable bearings for a dob
  • From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
• ATM Website update on other telescopes
  • From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
• ATM Effective contrast aperture
  • From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
• Re: ATM divided truss tubes: did I see them here?
  • From: "Stathis Kafalis" <dobsonstathis@planet-interkom.de>
• Re:ATM Cassegrain as second telescope project.
  • From: Steve Beccue <lsteve@daffodil.beccue.org>
• Re: ATM Spherometer Formula
  • From: Steve Beccue <lsteve@daffodil.beccue.org>
• Re: ATM BVC Glass
  • From: Steve Beccue <lsteve@daffodil.beccue.org>
• ATM OT but...
  • From: "Steve Davis" <designsdavis@mchsi.com>
• Re: ATM Spider Advice
  • From: Steve Fejes <jsfejes@swva.net>
• ATM Curved Spiders
  • From: Steve Fejes <jsfejes@swva.net>
• ATM Cassegrain as second telescope project.
  • From: "Suzy Jackson" <suzyj@bigpond.com>
• Re: ATM Cassegrain as second telescope project.
  • From: "Suzy Jackson" <suzyj@bigpond.com>
• Re: ATM Re: Why?
  • From: "Suzy Jackson" <suzyj@bigpond.com>
• Fw: ATM Re: Why?
  • From: "Suzy Jackson" <suzyj@bigpond.com>
• ATM OT: Interesting article regarding planet finding telescope
  • From: "Thomas A Simmons" <tasimmons@raytheon.com>
• Re: ATM self contained vibration damper..
  • From: "Thomas A Simmons" <tasimmons@raytheon.com>
• Re: ATM Hogging Out -making flats????
  • From: "Tim Rickard" <trickar1@san.rr.com>
• Re: ATM Hogging Out -making flats????
  • From: "Tim Rickard" <trickar1@san.rr.com>
• Re: ATM Hogging Out -making flats????
  • From: "Tim Rickard" <trickar1@san.rr.com>
• Re: ATM Hogging Out -making flats????
  • From: "Tim Rickard" <trickar1@san.rr.com>
• Re: ATM Hogging Out -making flats????
  • From: "Tim Rickard" <trickar1@san.rr.com>
• Re: ATM Hogging Out -making flats????
  • From: "Tim Rickard" <trickar1@san.rr.com>
• Re: ATM Hogging Out -making flats????
  • From: "Tim Rickard" <trickar1@san.rr.com>
• Re: ATM Hogging Out -making flats????
  • From: "Tim Rickard" <trickar1@san.rr.com>
• Re: ATM Hogging Out -making flats????
  • From: "Tim Rickard" <trickar1@san.rr.com>
• Re: ATM Hogging Out -making flats????
  • From: "Tim Rickard" <trickar1@san.rr.com>
• Re: ATM Hogging Out -making flats????
  • From: "Tim Rickard" <trickar1@san.rr.com>
• Re: ATM Exit Pupil Question
  • From: "Tim Rickard" <trickar1@san.rr.com>
• Re: ATM Exit Pupil Question
  • From: "Tim Rickard" <trickar1@san.rr.com>
• ATM How make a cardboard tube stiffer ?
  • From: "Timo Nordberg" <mybrightstar@mail.com>
• Re: ATM Hogging Out
  • From: Tom Stokes <tstokes@pacbell.net>
• ATM Request for assistance from ETX-105, 125 owners
  • From: tttt ccccc <k3hx@juno.com>
• ATM Solar Powered Observatory, again.
  • From: tttt ccccc <k3hx@juno.com>
• ATM Light colour vs effect on night vision
  • From: tttt ccccc <k3hx@juno.com>
• Re: ATM Light colour vs effect on night vision
  • From: tttt ccccc <k3hx@juno.com>
• ATM Aluminum "stick" welding
  • From: tttt ccccc <k3hx@juno.com>
• Re:ATM 19 scopes in 3 hours
  • From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
• ATM 9 point cell
  • From: "Vegos" <astro@rvi.net>
• Re: ATM 9 point cell
  • From: "Vegos" <astro@rvi.net>
• Re: ATM 9 point cell
  • From: "Vegos" <astro@rvi.net>
• Re: ATM Temperatures of mirror when aluminizing
  • From: watery marmot <waterymarmot@yahoo.com>
• Re: ATM Temperatures of mirror when aluminizing
  • From: watery marmot <waterymarmot@yahoo.com>
• RE: ATM Real Time Automated Foucault Tester
  • From: "Wesley Bielinski" <wbielinski@telocity.com>
• RE: ATM Temperatures of mirror when aluminizing
  • From: "Wesley Bielinski" <wbielinski@telocity.com>
• Re:ATM Cassegrain as second telescope project.
  • From: William Mc Hale <wmchal1@umbc.edu>
• Re:ATM Cassegrain as second telescope project.
  • From: William Mc Hale <wmchal1@umbc.edu>
• Re: Re:ATM Cassegrain as second telescope project.
  • From: William Mc Hale <wmchal1@umbc.edu>
• Re:ATM Cassegrain as second telescope project.
  • From: William Mc Hale <wmchal1@umbc.edu>
• Re: ATM Cassegrain as 2nd project / optics calculations
  • From: William Mc Hale <wmchal1@umbc.edu>
• Re: ATM Why?
  • From: William Mc Hale <wmchal1@umbc.edu>
• Re: ATM Why?
  • From: William Mc Hale <wmchal1@umbc.edu>
• Re: ATM Why?
  • From: William Mc Hale <wmchal1@umbc.edu>
• Re: ATM Why?
  • From: William Mc Hale <wmchal1@umbc.edu>
• ATM How small a secondary is useful
  • From: William Mc Hale <wmchal1@umbc.edu>
• Re: ATM How small a secondary is useful
  • From: William Mc Hale <wmchal1@umbc.edu>
• Re: ATM Which colour
  • From: William Mc Hale <wmchal1@umbc.edu>
• Re: ATM Treaded inserts.
  • From: "William Thornley" <billt051@hotmail.com>