[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

ATM Fusing pyrex blanks

To: "'atm@shore.net'" <atm@shore.net>
Subject: ATM Fusing pyrex blanks
From: "Curran, Marty" <Marty.Curran@echostar.com>
Date: Fri, 3 Aug 2001 08:40:04 -0600
Reply-To: "Curran, Marty" <Marty.Curran@echostar.com>
Sender: owner-atm@shore.net


	I have access to a whole pile of 16" blanks but they are all 3/4". I
know that 3/4" is probably adequate if it is supported properly; but for my
first mirror grinding experience, I don't really want to play around with
thin glass yet. My question is this. Is there some compound that I can glue
two of these together with that will not cause distrotions when the mirror
cools down or heats up ???? Thanks in advance.

-Marty

Follow-Ups:
- Re: ATM Fusing pyrex blanks
  - From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Fusing pyrex blanks
  - From: "Ken Hunter" <kb7h@onemain.com>

Prev by Author: Re: ATM Laptop Screen Covers
Next by Author: ATM 16" Blanks
Prev by thread: Re: ATM Fringes?
Next by thread: Re: ATM Fusing pyrex blanks
Index(es):
- Author
- Thread