[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: ATM 6" mirror

To: Viper71049@aol.com
Subject: Re: ATM 6" mirror
From: Ken <lowther@worldnet.att.net>
Date: Wed, 09 Aug 2000 17:51:29 -0400
CC: atmer@flash.net, atm@shore.net
References: <3a.8d9aec7.26c2ec51@aol.com>
Reply-To: Ken <lowther@worldnet.att.net>
Sender: owner-atm@shore.net

Viper71049@aol.com wrote:
> 
> To All who replied.
> 
  The support system uses a three point cell and is
> held on with wooden supporters. I remounted the mirror last night and nothing
> seemed to work!  

I don't remember if you said what f ratio your mirror is.  Sounds  as if
you could have some mounting problems if nothing worked after
remounting.  Patience.

-- 
Ken Lowther
Youngstown, Ohio
http://www.atmsite.org
ATM FAQ and more
Good starting place for amateur telescope makers

References:
- Re: ATM 6" mirror
  - From: Viper71049@aol.com

Prev by Author: Re: ATM size DOES matter
Next by Author: Re: ATM blades and tile
Prev by thread: Re: ATM 6" mirror
Next by thread: Re: ATM 6" mirror
Index(es):
- Author
- Thread