[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: ATM buying a lathe II

To: atm@shore.net
Subject: Re: ATM buying a lathe II
From: Andy Saulietis <iss@pvtnetworks.net>
Date: Sun, 06 Aug 2000 09:40:58 -0600
In-Reply-To: <3.0.1.32.20000806084512.01bb2f08@pop.together.net>
Reply-To: Andy Saulietis <iss@pvtnetworks.net>
Sender: owner-atm@shore.net


Ron writes

>   Unless you plan on doing work on the side, anything bigger then a floor
>model 13X36 cc is getting large. It may require 220V 3PH for one thing.

1 phase > 3 phase  converters can be obtained for ~$100-200, with ratings
up to 5hp. They waste a little power in the conversion process
but you can use otherwise useless motors.





  



Andy Saulietis
ISS Enterprises
39 Silver Fox Trail
Mayhill NM 88339
505-687-3067 voice
505-687-3021 fax, call voice or e-mail to set up
e-mail: iss@pvtnetworks.net

References:
- ATM buying a lathe II
  - From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>

Prev by Author: Re: ATM size DOES matter
Next by Author: Re: ATM size DOES matter
Prev by thread: ATM buying a lathe II
Next by thread: ATM c-8 drive upgrades...?
Index(es):
- Author
- Thread