Amateur Telescope Makers (ATM) Archive for AUG00 - by author
- ATM FOCAL PLANE QUESTIONS
- From: "(RIA) Durkin, Kenneth M" <k.durkin@state.gov>
- ATM FOCAL PLANE FOUND - THANKS
- From: "(RIA) Durkin, Kenneth M" <k.durkin@state.gov>
- RE: ATM Re: FOCAL PLANE FOUND - THANKS
- From: "(RIA) Durkin, Kenneth M" <k.durkin@state.gov>
- RE: ATM FOCAL PLANE FOUND - THANKS
- From: "(RIA) Durkin, Kenneth M" <k.durkin@state.gov>
- Re: ATM mirrorbox not exactly square
- From: "Frédéric Géa" <GEAF@CSI.COM>
- Re: ATM Catch a Wave
- From: "Frédéric Géa" <GEAF@CSI.COM>
- Re: ATM Thin aluminium tube in Frnace
- From: "Frédéric Géa" <GEAF@CSI.COM>
- Re: ATM Thin aluminium tube in Frnace
- From: "Frédéric Géa" <GEAF@CSI.COM>
- Re: ATM Optical manufacturer
- From: "Frédéric Géa" <GEAF@CSI.COM>
- Re: ATM problem with mirror cell
- From: "A. Suykerbuyk" <asuyker@wxs.nl>
- Re: ATM drillling stainless steel
- From: "A. Suykerbuyk" <asuyker@wxs.nl>
- Re: ATM lathe and mill
- From: "A. Suykerbuyk" <asuyker@wxs.nl>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: "A. Suykerbuyk" <asuyker@wxs.nl>
- Re: ATM shroud weight
- From: "A. Suykerbuyk" <asuyker@wxs.nl>
- Re: ATM reducing the weight
- From: "A. Suykerbuyk" <asuyker@wxs.nl>
- Re: ATM cheap glass sources
- From: "A.G. Ruud" <mrsruud@hotmail.com>
- ATM Gigabit & Myrinet
- From: "Aaron Taylor" <Taylor@Integrityol.com>
- ATM Gigabit & Myrinet Mistake
- From: "Aaron Taylor" <Taylor@Integrityol.com>
- ATM Metal Mirrors
- From: "Adam Old" <jamcorp@lycos.com>
- Re: ATM Help with University Optics mirror cell
- From: Adam Perkins <scopeguru@yahoo.com>
- Re: ATM Side bearing on dobsonian
- From: Adam Perkins <scopeguru@yahoo.com>
- Re: ATM Need for cheap/used worm gear
- From: Adam Perkins <scopeguru@yahoo.com>
- ATM: Modified Stroke Length for Undersized Tool?
- From: Adam Rosenberg <adamr@synopsys.COM>
- ATM: Continue Polishing or Back to Fine Grinding?
- From: Adam Rosenberg <adamr@synopsys.COM>
- ATM still waiting
- From: Aditya Hermawan <aditya-h@mitra.net.id>
- Re: ATM problem with mirror cell
- Re: ATM HELP! Damp garage and sonotube...
- ATM Re: 25" scope
- ATM Interferometry analysis of 25"
- Fwd: ATM Interferometry analysis of 25"
- Re: ATM Interferometry analysis of 25"
- Re: ATM Marking center of mirror
- From: "Albert Highe" <ahighe@ix.netcom.com>
- Re: ATM REALLY BIG elavation bearings....
- From: "Albert Highe" <ahighe@ix.netcom.com>
- Re: ATM Eyepieces
- From: "Albert Highe" <ahighe@ix.netcom.com>
- Re: ATM 16" "sling"?
- From: "Albert Highe" <ahighe@ix.netcom.com>
- Re: ATM Center of gravity of semicircular elevation bearings
- From: "Albert Highe" <ahighe@ix.netcom.com>
- Re: ATM Center of gravity of semicircular elevation bearings
- From: "Albert Highe" <ahighe@ix.netcom.com>
- ATM Re:
- From: "Albert Highe" <ahighe@ix.netcom.com>
- Re: ATM A three tube scope like Alice
- From: "Albert Highe" <ahighe@ix.netcom.com>
- RE: ATM woods
- From: "Alsing, Paul" <palsing@harris.com>
- Re: Re: ATM Portable power...
- From: anderiii@mindspring.com
- Re: ATM Help! What Metal Lathe Size?
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM size DOES matter
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM buying a lathe II
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM size DOES matter
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM size DOES matter
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM laser pointers
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM : Anamorphism?
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM mirror sides and back, how smooth
- From: Andy Saulietis <iss@pvtnetworks.net>
- RE: ATM more binoviewer nonsense
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM sharpie test
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM : Additional Secondary for guiding ( was offcenter secondary)
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM : Additional Secondary for guiding ( was offcenter secondary)
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM : Additional Secondary for guiding ( was offcenter secondary)
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM magnetic altitude bearings
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM magnetic altitude bearings
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Metal Mirrors
- From: Andy Saulietis <iss@pvtnetworks.net>
- Re: ATM Pics from Stellafane
- From: Anthony Stillman <atmer@flash.net>
- ATM Ranker
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Marking center of mirror
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Focus dept
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Roughing Out
- From: Anthony Stillman <atmer@flash.net>
- ATM Rotten Weekend
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM: Dang hard speculum metal
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Mirror cell thoughts
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Eyepieces
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM turret telescope
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM board layout programs
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM turret telescope
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM board layout, what resist?
- From: Anthony Stillman <atmer@flash.net>
- ATM Curious Observation
- From: Anthony Stillman <atmer@flash.net>
- ATM New Chabot Science Center
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Combine Newton/MX916 CCD ?
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM more binoviewer nonsense
- From: Anthony Stillman <atmer@flash.net>
- ATM Obsidian
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM low cost secondarys
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM FOCAL PLANE FOUND - THANKS
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Interferometry analysis of 25"
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Interferometry analysis of 25"
- From: Anthony Stillman <atmer@flash.net>
- Re: ATM Re: Catch a Wave
- Re: ATM Major Catastrophe!
- Re: ATM 21" f/6 - Rough Grinding
- ATM Blobs [was Mirror cell thoughts]
- Re: ATM 21" f/6 - Rough Grinding
- Re: ATM Mirror cell thoughts
- Re: ATM astigmatism update
- Re: ATM Cooling fans - blow sideways like the pro's
- Re: ATM P-V vs. RMS
- Re: ATM P-V vs. RMS
- Re: ATM P-V vs. RMS
- ATM OT (approved) Help needed in Panama...
- From: Archer Sully <archer@meer.net>
- RE: ATM 14.5 internet scope...update
- From: "Arjan te Marvelde (EMN)" <Arjan.te.Marvelde@emn.ericsson.se>
- ATM: Stress
- From: "Arjan te Marvelde (EMN)" <Arjan.te.Marvelde@emn.ericsson.se>
- FW: ATM Primary mirror support in the horizontal plane (Nastran plots)
- From: "Arjan te Marvelde (EMN)" <Arjan.te.Marvelde@emn.ericsson.se>
- ATM Re: atm-digest V1 #2240
- From: "Art DeBrito" <ionheavens@hotmail.com>
- Re: ATM Field De-rotator Question, and an Important Alternate Scope Design
- ATM RC Cass secondaries, anyone had luck making?
- Re: ATM : Additional Secondary for guiding
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Refractor objective; oil spacing
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM magnetic altitude bearings
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Interferometry analysis of 25"
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Interferometry analysis of 25"
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- ATM Interferometry vs. Legacy Testing
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- ATM Re: was Interferometry vs. Legacy Testing
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: was ATM Interferometry vs. Legacy Testing
- From: "B. Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Re: Metric versus Imperial (Was Comet LINEAR)
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- Re: ATM dismantled name-brand scope.
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- Re: ATM dismantled name-brand scope.
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- Re: Re ATM eyepiece storage box
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Stepper motor from old ????? drive
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- Re: ATM stepper motors from old 5 1/4" drives
- From: "Barlow Pepin" <atmjedit@conceptsnet.com>
- Re: ATM Eyepieces
- From: Barry Keeney <barryk@chaoscon.com>
- Re: ATM Center of gravity of semicircular elevation bearings
- From: "Bell, Andrew" <AMB2@pge.com>
- ATM Center of gravity, redux
- From: "Bell, Andrew" <AMB2@pge.com>
- ATM Finders and FOV
- From: "Bell, Andrew" <AMB2@pge.com>
- ATM Off-Axis Masks? Bino-Viewing?
- From: "Bell, Andrew" <AMB2@pge.com>
- ATM RE: DSCs vs Bartel's Scopedrive
- From: "Bell, Andrew" <AMB2@pge.com>
- RE: ATM LASIK anyone?
- From: "Bielinski, Wesley (Consultant)" <WBielinski@ACNielsen.com>
- ATM Re: End rings
- From: "Bill Cook" <atmj1@conceptsnet.com>
- An ATM on COMMERCIAL Telescopes
- From: "Bill Cook" <atmj1@conceptsnet.com>
- ATM Central Obstructions
- From: "Bill Cook" <atmj1@conceptsnet.com>
- ATM Re: 55 gal drum
- From: "Bill Cook" <atmj1@conceptsnet.com>
- Re: ATM Portable power...
- From: Bill Lee <wlee@ix.netcom.com>
- Re: ATM Travel Scope size restrictions
- From: Bill Lee <wlee@ix.netcom.com>
- ATM re:Hydrometer/Baume
- From: Bill Marriott <btk@pacbell.net>
- Re: ATM re:Hydrometer/Baume
- From: Bill Marriott <btk@pacbell.net>
- FW: ATM Help with University Optics mirror cell
- From: "Bill Milner" <wdmilner@uswest.net>
- ATM Re: Modified Stroke Length for Undersized Tool?
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Large mirror blanks
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Help! What Metal Lathe Size?
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Major Catastrophe!
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM crystal ball polisher
- From: "Bill T." <twentiethwave@hotmail.com>
- ATM Super Simple Side Bearings
- From: "Bill T." <twentiethwave@hotmail.com>
- ATM Simpe Side Bearings More Info
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM 21" f/6 - Rough Grinding
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Solid-state tilt sensor
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Solid-state tilt sensor
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM woods
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Diamond tile cutter curve generator - low tech
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Newt for baffling arangements
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Newt for baffling arangements
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Dental Stone
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Re: 25" scope
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM board layout programs
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Star testing question?
- From: "Bill T." <twentiethwave@hotmail.com>
- Re:ATM Mirrors and Dust
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Preparing a 55 gallon drum for a grinding platform
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM sharpie test
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM FOCAL PLANE QUESTIONS
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Grit advice needed
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM FOCAL PLANE QUESTIONS
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM reducing the weight
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: Serious over correction (was ATM)
- From: "Bill T." <twentiethwave@hotmail.com>
- ATM Tilt-A-Foucault
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Polishing pad questions
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Metal Mirrors
- From: "Bill T." <twentiethwave@hotmail.com>
- ATM Plastic Mirrors (was Metal Mirrors)
- From: "Bill T." <twentiethwave@hotmail.com>
- Re: ATM Reflector attached to a barn door drive
- From: "Bob Prabowo" <bob@bahana.co.id>
- Focuser position (was RE: ATM Re: In defense of blah, blah, blah...)
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- RE: ATM wood tips
- From: Bob Prabowo <BOB@BAHANA.CO.ID>
- Re: ATM What to use to hold tube in tube box?
- From: "Bob Scholtz" <rscholtz01@sprynet.com>
- Re: ATM Question for Hockey Puck Users
- From: "Bob Scholtz" <rscholtz01@sprynet.com>
- ATM Annealing questions
- From: Bratislav Curcic <Bratislav.Curcic@ericsson.com.au>
- Re: ATM more binoviewer nonsense
- From: Bratislav Curcic <Bratislav.Curcic@ericsson.com.au>
- ATM Curious Observation
- From: Bratislav Curcic <Bratislav.Curcic@ericsson.com.au>
- ATM Mak-Newt sets - any finished ?
- From: Bratislav Curcic <Bratislav.Curcic@ericsson.com.au>
- Re: ATM NEWT2.5
- From: Brian Nestel <blast@aloha.net>
- Re: ATM problem with mirror cell
- From: "Brian S. Boothman" <bboothman@unitedmold.com>
- ATM Wide field camera.
- From: "Brian S. Boothman" <bboothman@unitedmold.com>
- ATM Mak Cass.
- From: "Brian S. Boothman" <bboothman@unitedmold.com>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: "Bryan Greer" <bgreer@fpi-protostar.com>
- Re: ATM: Gugolz 55 pitch
- Re: ATM Splitting a 1.5" *1" blank
- ATM re: removing gold coating
- ATM cutting Stainless Steel?
- From: "Buddy In NY" <maxwebhead@mindspring.com>
- Re: ATM cutting Stainless Steel?
- From: "Buddy In NY" <maxwebhead@mindspring.com>
- Re: ATM cutting Stainless Steel?
- From: "Buddy In NY" <maxwebhead@mindspring.com>
- ATM S&T article on geodesic dome project
- From: "callum potter" <callumpotter@hotmail.com>
- Re: ATM Best Counterweight Material
- From: "Cary W. Chleborad" <Cary@SciTechAstro.com>
- ATM spider effects?
- From: Charles Broward <broward@afn.org>
- ATM Help!!!!
- From: "Charles E. Comer" <cecomer@lynchburg.net>
- ATM: Where is Clausing?
- From: "Charles O'Donnell" <kozmickid@mindspring.com>
- ATM Re: Where is Clausing?
- From: "Charles O'Donnell" <kozmickid@mindspring.com>
- Re: ATM Need info on telescope workshops
- From: "Charles O'Donnell" <kozmickid@mindspring.com>
- ATM: Dang hard speculum metal
- From: "Charles O'Donnell" <kozmickid@mindspring.com>
- Re: ATM: Dang hard speculum metal
- From: "Charles O'Donnell" <kozmickid@mindspring.com>
- Re: ATM Mak-Newt sets - any finished ?
- From: "Charles Taylor" <Chucktaylor3@Integrityol.Com>
- Re: ATM Off topic and American pride
- From: "Charles Taylor" <Chucktaylor3@Integrityol.Com>
- Re: ATM Mirror Grinding Machine
- From: "Charles Taylor" <Chucktaylor3@Integrityol.Com>
- Re: ATM OT: Astronomical dividing head
- From: "Chris Heapy" <Chrish@easynet.co.uk>
- Re: ATM Re: working Sainless Steel
- From: "Chris Heapy" <Chrish@easynet.co.uk>
- ATM Hill around a hole
- From: Chris Mansfield <atmvega@yahoo.com>
- ATM Cutting circles in plywood
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- Re: ATM Need for cheap/used worm gear
- From: "Chris Rowland" <chris@sapiens.nildram.co.uk>
- Re: ATM Re: Catch a Wave
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Travel Scope size restrictions
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Travel Scope size restrictions
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Mirror cell thoughts
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Mirror cell thoughts
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Mirror cell thoughts
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Mirror cell thoughts
- From: "Chuck Hards" <chuckh@companionsystems.com>
- RE: ATM Mirror cell thoughts
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Mirror cell thoughts
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Mirror cell thoughts
- From: "Chuck Hards" <chuckh@companionsystems.com>
- RE: ATM Mirror cell thoughts
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Mirror Cell Thoughts
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Mirror cell thoughts
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Woven Teflon (was REALLY BIG elevation bearings)
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Circulating fan - air flow direction
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Removing gold coatings
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Removing gold coatings
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM Removing gold coatings
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Refractor question
- From: "Chuck Hards" <chuckh@companionsystems.com>
- Re: ATM 55 gal. drum
- From: "Chuck Hards" <chuckh@companionsystems.com>
- ATM Effects of an Off Center Secondary
- From: "Chuck Shaw" <cshaw@ghg.net>
- Re: ATM size DOES matter
- From: "Clayton Kessler" <ckessler@gatecom.com>
- No Subject
- From: Clive Milne <milnecd@yahoo.com>
- ATM Re: American pride ?celestron is a joke
- From: Clive Milne <milnecd@yahoo.com>
- Re: ATM Re: American pride ?c-------- is a joke
- From: Clive Milne <milnecd@yahoo.com>
- ATM Primary mirror support in the horizontal plane (Nastran plots)
- From: Clive Milne <milnecd@yahoo.com>
- ATM Re- Nastran plots
- From: Clive Milne <milnecd@yahoo.com>
- ATM Source for mounting ring hinges
- From: <comegys_greg@si.com>
- ATM Has anyone experimented with alternative methods?
- From: "Craig Gibson" <craiggib@icon.co.za>
- ATM Attaching and/or bending Ebony Star
- From: Curt Wittenberg <curtw@scripps.edu>
- Re: ATM Attaching and/or bending Ebony Star
- From: Curt Wittenberg <curtw@scripps.edu>
- Re: ATM balance
- From: Curt Wittenberg <curtw@scripps.edu>
- ATM Help interpreting star test
- From: Curt Wittenberg <curtw@scripps.edu>
- ATM Re: [Telescopes] Help interpreting star test
- From: Curt Wittenberg <curtw@scripps.edu>
- ATM DSCs vs Bartel's Scopedrive
- From: Curt Wittenberg <curtw@scripps.edu>
- Re: ATM DSCs vs Bartel's Scopedrive
- From: Curt Wittenberg <curtw@scripps.edu>
- Re: ATM problem with mirror cell
- From: "Dale Campbell" <campbeld@abs-lcms.com>
- Re: ATM Circulating fan - air flow direction
- From: "Dale Campbell" <campbeld@abs-lcms.com>
- Re: ATM Removing gold coatings
- From: "Dale Campbell" <campbeld@abs-lcms.com>
- Re: ATM A three tube scope like Alice
- From: "Dale Campbell" <campbeld@abs-lcms.com>
- ATM lister in News
- From: "Dale Campbell" <campbeld@abs-lcms.com>
- ATM Help OT Buying a Lathe
- From: "Damian Kruger" <djkruger@mpx.com.au>
- Re: Finding optical center. Was:ATM Marking center of mirror
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Best Counterweight Material ?
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM astigmatism update
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM sharpie test
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Removing gold coatings
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Cassegrain, Without Plug
- From: Dan Cassaro <dcass@mediaone.net>
- Re: ATM Mirror Problem Update
- From: "Dan Chaffee" <dchaffee@gvi.net>
- Re:ATM Making a Replica of Galileo's Telescope
- From: "Dan Chaffee" <dchaffee@gvi.net>
- ATM teflon source
- From: "Dave Bevel" <davebevel@mindspring.com>
- Re: ATM board layout, what resist?
- From: "Dave Bevel" <davebevel@mindspring.com>
- Re: ATM Help! What Metal Lathe Size
- From: Dave Gault <daveg@tpg.com.au>
- ATM Grinding Tools of a Professional Optician
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM Dew heater
- From: Dave Gault <daveg@tpg.com.au>
- ATM a new beamsplitter? was ATM more binoviewer nonsense
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM a new beamsplitter? was ATM more binoviewer nonsense
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM a new beamsplitter? was ATM more binoviewer nonsense
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM Focuser position
- From: Dave Gault <daveg@tpg.com.au>
- Re: ATM balance
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM sharp pencils
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM Marking center of mirror
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM: Continue Polishing or Back to Fine Grinding?
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM nesting aluminum tubes?
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM source of porthole glass?
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM source of porthole glass?
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM Ultra-Light Planning
- From: Dave Smith <smithers@ucla.edu>
- Re: ATM Travel Scope size restrictions
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Teflon?
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Removing gold coatings
- From: Dave Sopchak <das@po.cwru.edu>
- Re: ATM Has anyone experimented with alternative methods?
- From: Dave Sopchak <das@po.cwru.edu>
- RE: ATM OT: Astronomical dividing head
- From: "Dave Stott" <dstott@acm.org>
- ATM help
- From: david <david@computan.on.ca>
- ATM A three tube scope like Alice
- From: David Eisert <deisert@src.wisc.edu>
- Re: ATM A three tube scope like Alice
- From: David Eisert <deisert@src.wisc.edu>
- ATM Ek encoder interface updated schematic
- From: "David Ek" <ekdave@earthlink.net>
- Re: ATM cutting Stainless Steel?
- From: "David J. File" <davefile@usa.net>
- Re: ATM Mirror Cell Thoughts
- From: david lewis <lewis@eecg.toronto.edu>
- Re: ATM sharp pencils
- From: David Smith <smithers@ucla.edu>
- Re: ATM balance
- From: David Smith <smithers@ucla.edu>
- Re: ATM Source for mounting ring hinges
- From: David Smith <smithers@ucla.edu>
- No Subject
- From: "david thomas" <badsun23@hotmail.com>
- ATM Reflector attached to a barn door drive
- From: "david thomas" <badsun23@hotmail.com>
- ATM Silicone glue?
- From: "david thomas" <badsun23@hotmail.com>
- ATM thanks
- From: "david thomas" <badsun23@hotmail.com>
- ATM How do I attach it??
- From: "Davidson, Phil" <pdavidson@europe.dg.com>
- RE: ATM Marking center of mirror
- From: "Day, Jack" <jday@clinitech.net>
- RE: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: "Day, Jack" <jday@clinitech.net>
- RE: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: "Day, Jack" <jday@clinitech.net>
- ATM Preparing a 55 gallon drum for a grinding platform
- From: "Day, Jack" <jday@clinitech.net>
- RE: ATM 8.5" Candle Holder Mirror
- From: "Day, Jack" <jday@clinitech.net>
- ATM RE: Interferometer
- From: Dean Ketelsen <ketelsen@as.arizona.edu>
- ATM Side bearing on dobsonian
- From: "DeBusk" <talkalot@intplsrv.net>
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: "DeBusk" <talkalot@intplsrv.net>
- Re: ATM Need info on telescope workshops
- From: "DeBusk" <talkalot@intplsrv.net>
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: "DeBusk" <talkalot@intplsrv.net>
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: "DeBusk" <talkalot@intplsrv.net>
- ATM Re: 4.25" richfield
- From: "DeBusk" <talkalot@intplsrv.net>
- Re: ATM nesting aluminum tubes?
- From: "DeBusk" <talkalot@intplsrv.net>
- ATM tube painting recommendation
- From: "DeBusk" <talkalot@intplsrv.net>
- Re: ATM Ultra-Light Planning
- From: deepsky <deepsky@usmo.com>
- Re: ATM Perferating Cassegrain (slightly off topic)
- From: Del Stanton <sd20@earthlink.net>
- ATM Re:
- From: Del Stanton <sd20@earthlink.net>
- ATM mirror sides and back, how smooth
- From: "designsdavis" <designsdavis@home.com>
- ATM mirror sides and back, how smooth
- From: "designsdavis" <designsdavis@home.com>
- ATM 16" "sling" ??
- From: "designsdavis" <designsdavis@home.com>
- Re: ATM dismantled name-brand scope.
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM LASIK anyone? (fwd)
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Mol Sieve Vacuum Pump and aluminizing?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- RE: ATM Mol Sieve Vacuum Pump and aluminizing?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM ultracentrifuge for aluminizing
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- RE: ATM Mol Sieve Vacuum Pump and aluminizing?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM 130 line slide
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- RE: ATM Re: 17 1/4 quartz blank on eBay
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM A f-2 CASS!
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM OT: Astronomical dividing head
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM OT: Astronomical dividing head
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM My Oslo rendering of a Siglar
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM Brian about Siglar design
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- RE: ATM Scratch during initial polishing...question
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- RE: ATM Scratch during initial polishing...question
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM source of porthole glass?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM source of porthole glass?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Primary mirror made of 2 pieces of glass
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM Has anyone experimented with alternative methods?
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM f/6 21" Status & Questions
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: SV: ATM f/6 21" Status & Questions
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM f/6 21" Status & Questions
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- ATM 21" F/6: response about sagitta equations
- From: Dominic-Luc Webb molmed <Dominic.Luc-Webb@molmed.ki.se>
- Re: ATM size DOES matter
- From: "Don Clement" <clement@san.rr.com>
- Re: ATM size DOES matter
- From: "Don Clement" <clement@san.rr.com>
- Re: ATM Dew heater
- From: "Don Clement" <clement@san.rr.com>
- Re: ATM Dew heater, more questions!!!!
- From: "Don Clement" <clement@san.rr.com>
- Re: ATM cutting Stainless Steel?
- From: "Don Clement" <clement@san.rr.com>
- ATM Central obstruction definition
- From: "Don Clement" <clement@san.rr.com>
- Re: ATM Central Obstructions
- From: "Don Clement" <clement@san.rr.com>
- ATM RETE's Take on the Astronomical dividing head
- From: "Donn Starkey" <starkey@fwi.com>
- Re: ATM Cutting circles of aluminum
- From: Donovan Buck <donovan@bravoz.com>
- ATM Roughing Out
- From: "Doug Arion" <ariond1@carthage.edu>
- Re: [ATM newt]
- From: Doug B <dougbr@usa.net>
- Re: ATM S&T article on geodesic dome project
- From: doug kniffen <dk@usmo.com>
- Re: ATM S&T article on geodesic dome project
- From: doug kniffen <dk@usmo.com>
- RE: ATM S&T article on geodesic dome project
- From: doug kniffen <dk@usmo.com>
- Re: ATM Finder fov calculation???
- From: doug kniffen <dk@usmo.com>
- Re: ATM New Feather Touch Focuser?
- From: doug kniffen <dk@usmo.com>
- ATM RE: More Wood Tips
- From: Doug Tanaka <dtanaka@seanet.com>
- ATM A Question To My Peers Ref Grinding
- From: "Duncan Radbourne" <duncan.radbourne@tesco.net>
- ATM Fw: Glass thickness
- From: "Duncan Radbourne" <duncan.radbourne@tesco.net>
- Re: ATM re: aligning finders with main scope
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM question about star testing?
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Solid-state tilt sensor
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Does Adding Barlow Change Focus?
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Newt for baffling arangements
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Re: Maksutov Collimation
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM more binoviewer nonsense
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Removing gold coatings
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM FOCAL PLANE QUESTIONS
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Newt...
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM more binoviewer nonsense
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Date: Thu, 17 Aug 2000 21:16:16 -0400
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM more binoviewer nonsense
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM more binoviewer nonsense
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM more binoviewer nonsense
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM a new beamsplitter? was ATM more binoviewer nonsense
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Re: FOCAL PLANE FOUND - THANKS
- From: Dwight Elvey <elvey@hal.com>
- Re[2]: ATM Re: FOCAL PLANE FOUND - THANKS
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM a new beamsplitter? was ATM more binoviewer nonsense
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM a new beamsplitter? was ATM more binoviewer nonsense
- From: Dwight Elvey <elvey@hal.com>
- Re[3]: ATM Re: FOCAL PLANE FOUND - THANKS
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Effects of an Off Center Secondary
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Using an Interferometer on mirror
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM newt
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Date: Mon, 28 Aug 2000 22:29:32 +0200
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Primary mirror support in the horizontal plane (Nastran plots)
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM 21" F/6: response about sagitta equations
- From: Dwight Elvey <elvey@hal.com>
- Re: ATM Attaching and/or bending Ebony Star
- From: "Ed Erbeck Jr." <ed@crazyedoptical.com>
- Re: ATM Attaching and/or bending Ebony Star
- From: "Ed Erbeck Jr." <ed@crazyedoptical.com>
- Re: ATM What to use to hold tube in tube box?
- From: "Ed Erbeck Jr." <ed@crazyedoptical.com>
- Re: ATM Altitude bearing smoothness?
- From: "Ed Erbeck Jr." <ed@crazyedoptical.com>
- ATM Teflon?
- ATM OT unsubscribe for vacation?
- ATM LASIK anyone?
- From: Eric Uthus <eric_uthus@und.nodak.edu>
- ATM truss tube clamps
- From: "Fabio Falchi" <falchifa@tin.it>
- Re: ATM Circulating fan - air flow direction
- From: "Frank" <thewards@mindspring.com>
- Re: ATM 16 inch
- From: "Frank" <thewards@mindspring.com>
- Re: ATM glueing mirror to cell
- From: "Frank" <thewards@mindspring.com>
- Re: ATM sharpie test
- From: "Frank" <thewards@mindspring.com>
- Re: ATM made in the USA
- From: "Frank" <thewards@mindspring.com>
- Re: ATM Re: American pride ?c-------- is a joke
- From: Frank Di Marzio <frank@trinity.unimelb.edu.au>
- Re: ATM Best Counterweight Material
- From: Frank Di Marzio <frank@trinity.unimelb.edu.au>
- Re: ATM board layout programs
- From: Frank Henriquez <frank@ucla.edu>
- Re: ATM board layout, what resist?
- From: Frank Henriquez <frank@ucla.edu>
- Re: ATM is it a good idea to hot press a lap in the oven?
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM is it a good idea to hot press a lap in the oven?
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM Combine Newton/MX916 CCD ?
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- OT: ATM thanks
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- Re: ATM newt
- From: "Frank Schiralli, Jr." <schiralli@mindspring.com>
- ATM University Optics Foucault Tester for sale!
- From: "Fred Herrmann" <fherrman@hiwaay.net>
- ATM Re: Dang hard speculum metal
- From: "Fred Herrmann" <fherrman@hiwaay.net>
- ATM Finder fov calculation???
- From: "Fred Herrmann" <fherrman@hiwaay.net>
- ATM The mirror and Dob are finished.. Thanks!
- From: "Fred Herrmann" <fherrman@hiwaay.net>
- ATM Focuser Placement Problem
- From: G Moore <gmoore_1@yahoo.com>
- ATM Focuser Placement Problem
- From: G Moore <gmoore_1@yahoo.com>
- ATM Primary mirror made of 2 pieces of glass
- From: "Garth van Sittert" <garth@mediasupplies.co.za>
- ATM Using an Interferometer on mirror
- From: "Garth van Sittert" <garth@mediasupplies.co.za>
- Re: ATM Fw: VIRUS ALERT
- From: Gary Woods <gwoods@albany.net>
- Re: Re ATM eyepiece storage box
- From: Gary Woods <gwoods@albany.net>
- Re: ATM size DOES matter
- From: Gary Woods <gwoods@albany.net>
- Re: ATM Sag software
- From: George Anderson <georgea@CAM.ORG>
- Re: ATM wood bearings
- From: George Anderson <georgea@CAM.ORG>
- Re: ATM size DOES matter
- From: George Anderson <georgea@CAM.ORG>
- Re: ATM Circulating fan - air flow direction
- From: George Anderson <georgea@CAM.ORG>
- Re: ATM more wood tips
- From: George Anderson <georgea@CAM.ORG>
- ATM nesting aluminum tubes?
- From: "Glenn Forney" <gforney@erols.com>
- ATM Blast from the past- SOT, longish
- Re: ATM Rough Figure Confirmed
- From: Guy Brandenburg <gfbranden@earthlink.net>
- ATM foucault translation, from the french
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM foucault translation, from the french
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM source of porthole glass?
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM ATM on COMMERCIAL Telescopes
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Has anyone experimented with alternative methods?
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Date: Mon, 28 Aug 2000 22:29:32 +0200
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Re: In defense of blah, blah, blah...
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM magnetic altitude bearings
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Free 5.25" floppy drives for ATM projects
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM magnetic altitude bearings
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM magnetic altitude bearings
- From: Guy Brandenburg <gfbranden@earthlink.net>
- Re: ATM Number of Zones in the Couder mask
- From: "Hasan Murtaza" <murtaza@idirect.com>
- RE: ATM glueing mirror to cell
- From: Heapy Chris CG <Chris.Heapy@astrazeneca.com>
- ATM OT: Astronomical dividing head
- From: Heapy Chris CG <Chris.Heapy@astrazeneca.com>
- RE: ATM nesting aluminum tubes?
- From: Heapy Chris CG <Chris.Heapy@astrazeneca.com>
- RE: ATM Source for "OFF-The shelf" half stepping -stepper controller
- From: Heapy Chris CG <Chris.Heapy@astrazeneca.com>
- RE: ATM Help OT Buying a Lathe
- From: Heapy Chris CG <Chris.Heapy@astrazeneca.com>
- Re: ATM American pride I
- Re: ATM Field de-rotator questions
- From: "Howard Banich" <hbanich@teleport.com>
- ATM Re: Equatorial platform field rotation
- From: "Howard Banich" <hbanich@teleport.com>
- Re: ATM Re: Equatorial platform field rotation
- From: "Howard Banich" <hbanich@teleport.com>
- Re: ATM: Where is Clausing?
- From: Howard Clausing <hclaus@clausing.com>
- Re: ATM mirrorbox not exactly square
- From: Hugues_Laroche@ses-astra.com
- Re: ATM question about star testing?
- From: Hugues_Laroche@ses-astra.com
- RE: ATM Glassboard...
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Marking center of mirror
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Large mirror blanks
- From: Hugues_Laroche@ses-astra.com
- ATM Re: Rough Grinding and tile tools
- From: Hugues_Laroche@ses-astra.com
- Re: ATM 21" f/6 - Rough Grinding
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Re: [atm]
- From: Hugues_Laroche@ses-astra.com
- Re: ATM 12x12x0.8" astrositall blank
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Spherical surfaces
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Preparing a 55 gallon drum for a grinding platform
- From: Hugues_Laroche@ses-astra.com
- Re: ATM foucault translation, from the french
- From: Hugues_Laroche@ses-astra.com
- ATM Dob balancing spreadsheet
- From: Hugues_Laroche@ses-astra.com
- Re: ATM shroud weight
- From: Hugues_Laroche@ses-astra.com
- ATM Choosing wax to seal tile tool channels: soft and colored if possible
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Grit advice needed
- From: Hugues_Laroche@ses-astra.com
- Re: ATM Choosing wax to seal tile tool channels: soft and colored ifpossible
- From: Hugues_Laroche@ses-astra.com
- ATM Spider Vane repair
- From: "Ian" <timshel@escape.ca>
- Re: ATM Ranker
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM saving grit
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM OT : Radio Astronomy
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM Mol Sieve Vacuum Pump and aluminizing?
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM drillling stainless steel
- From: Ian Stirling <root@mauve.demon.co.uk>
- ATM silicone pads
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM Stepper motor from old ????? drive
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM silicone pads
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM board layout problems
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM Circulating fan - air flow direction
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM Removing gold coatings
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM Need for cheap/used worm gear
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM cooling the mirror
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM Best Counterweight Material
- From: Ian Stirling <root@mauve.demon.co.uk>
- Re: ATM magnetic altitude bearings
- From: Ian Stirling <root@mauve.demon.co.uk>
- ATM astronomy class
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM saving grit
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM the old grind
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM bearings and tubes
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM size DOES matter
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM more bearings
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM buying a lathe II
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM shooting the tubes
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM wood bearings
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM old Titans
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM bearings
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM more shop tips
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM And speaking of lathes
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM cutting Alum.part I
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM cutting alum.part II
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM counter-weight
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM cutting circles
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM annealing
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM blades and tile
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM on todays menu
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM roundness
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM eyepiece
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM tube shims
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM barrel-design
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM barrel-design
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM dividing head
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM wax,'dops'&cerro-cast
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM working stainless
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM shop tip
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM more shop tips
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM field of sterility
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM made in the USA
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM alum. tubing
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM American pride I
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM to clairify
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM off-list mail
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM visualizing
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM all ears
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM fork
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM teflon
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM wood tips
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM more wood tips
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM finishing alum.
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- ATM old glass and wisdom
- From: Ina Ron Lippard Renaissance Reproductions <renrepro@together.net>
- Re: ATM Re: Recycling Grit Grader
- From: "J.O. Williams" <jow@techbase.com>
- Re: ATM tube painting recommendation
- From: "Jack McQuaide" <Jack8662@gte.net>
- Re: ATM problem with mirror cell
- From: "James O'Malley" <omalleyj@eclipse.net>
- Re: ATM problem with mirror cell
- From: "James O'Malley" <omalleyj@eclipse.net>
- ATM Re: working Sainless Steel
- From: James P Crombie <jpcrombie@islandtelecom.com>
- ATM Hartmann Test.
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Has anyone experimented with alternative methods?
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Interferometry analysis of 25"
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM RC Cass secondaries, anyone had luck making?
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM f/6 21" Status & Questions
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Ready to take the plunge!
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM P-V vs. RMS
- From: "James W. Burrows" <burrjaw@halcyon.com>
- Re: ATM Re: Catch a Wave
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM mirrorbox not exactly square
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM balance
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM problem with mirror cell
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM balance
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM problem with mirror cell
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM drillling stainless steel
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM lathe and mill
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM baffle diameter in mirrorbox
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM Cutting circles in plywood
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM 16" "sling" ??
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM 16" "sling"?
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM Re: 25" scope
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM spider effects?
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM glueing mirror to cell
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM shroud weight
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM reducing the weight
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM Reflector attached to a barn door drive
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM cooling the mirror
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM Silicone glue?
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- Re: ATM wood tips
- From: "Jan van Gastel" <jhm.van.gastel@mdw.vu.nl>
- ATM Re: Prime Focus
- From: Jarvis Krumbein <jkoptic@juno.com>
- ATM Re: nesting aluminum tubes
- From: Jarvis Krumbein <jkoptic@juno.com>
- ATM Re:Jon & MaryAnn doing flats
- From: Jarvis Krumbein <jkoptic@juno.com>
- ATM Re: [atm]
- From: Jasper Janssen <jasper@insaneoc.com>
- Re: ATM more binoviewer nonsense
- From: Jay LeBlanc <jaleblan@dakotacom.net>
- Re: ATM more binoviewer nonsense
- From: Jay LeBlanc <jaleblan@dakotacom.net>
- Re: ATM Refractor objective; oil spacing
- From: Jay LeBlanc <jaleblan@dakotacom.net>
- Re: ATM: Stress
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- Re: ATM foucault translation, from the french
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- Re: ATM Lightweight primaries (Was Metal Mirrors)
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- ATM Fused lightweight mirrors
- From: Jean-Guy Moreau <jgmoreau@lino.com>
- Re: ATM Interferometry analysis of 25"
- From: "Jeff Arnold" <scoper10@hotmail.com>
- Re: ATM In defense of Tasco
- From: "Jerome Jooste" <jeromej@icon.co.za>
- ATM New Giant Scope for South Africa
- From: "Jerome Jooste" <jeromej@icon.co.za>
- ATM Cassegrain, Without Plug
- From: Jerremy Baterson <jdbaterson@usa.net>
- Re: [Re: ATM Cassegrain, Without Plug]
- From: Jerremy Baterson <jdbaterson@usa.net>
- ATM slightly off topic
- From: jdove1@earthlink.net (Jerry Dove)
- Re: ATM problem with mirror cell
- From: jdove1@earthlink.net (Jerry Dove)
- ATM slightly off topic
- From: jdove1@earthlink.net (Jerry Dove)
- Re: ATM Bonding Black Felt to Stained Wood
- From: jdove1@earthlink.net (Jerry Dove)
- Re: ATM A question of fit
- From: jdove1@earthlink.net (Jerry Dove)
- Re: ATM Help! What Metal Lathe Size?
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM Surface preparation for galvanized sheet metal for roller bearingmotion
- From: Jerry Palmer <w6cwj@earthlink.net>
- Re: ATM cutting Stainless Steel?
- From: JERRY PALMER <w6cwj@earthlink.net>
- Re: ATM all ears
- From: JERRY PALMER <w6cwj@earthlink.net>
- Re: ATM magnetic altitude bearings
- From: JERRY PALMER <w6cwj@earthlink.net>
- ATM dismantled name-brand scope.
- From: Jerry Reddell <JReddell@incode-inc.com>
- RE: ATM dismantled name-brand scope.
- From: Jerry Reddell <JReddell@incode-inc.com>
- RE: ATM LASIK anyone?
- From: Jerry Reddell <JReddell@incode-inc.com>
- RE: ATM more binoviewer nonsense
- From: Jerry Reddell <JReddell@incode-inc.com>
- RE: ATM Cooling fans - blow sideways like the pro's
- From: Jerry Reddell <JReddell@incode-inc.com>
- ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: "Jim Dolson" <jdolson@iserv.net>
- ATM Best Counterweight Material ?
- From: "Jim Dolson" <jdolson@iserv.net>
- ATM Bonding Black Felt to Stained Wood
- From: "Jim Dolson" <jdolson@iserv.net>
- ATM Making Non-Parafocal EP's into Parafocal EP's
- From: "Jim Dolson" <jdolson@iserv.net>
- ATM Does Adding Barlow Change Focus?
- From: "Jim Dolson" <jdolson@iserv.net>
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: "Jim Dolson" <jdolson@iserv.net>
- Re: ATM A f-2 CASS!
- From: "Jim Dolson" <jdolson@iserv.net>
- ATM Question for Hockey Puck Users
- From: "Jim Dolson" <jdolson@iserv.net>
- ATM Using Fans Smaller than Mirror
- From: "Jim Dolson" <jdolson@iserv.net>
- ATM Comments on Iowa Scientific ?
- From: "Jim Dolson" <jdolson@iserv.net>
- ATM Looking for article in TM #30
- From: "Jim Dolson" <jdolson@iserv.net>
- Re: ATM glueing mirror to cell
- From: "Jim Fitch" <jf@arn.net>
- Re: ATM Need info on telescope workshops
- From: Jim Fitch <jf@arn.net>
- Re: ATM problem with mirror cell
- From: Jim Fitch <jf@arn.net>
- Re: ATM HEX Tile bonding?
- From: Jim Fitch <jf@arn.net>
- Re: ATM Polishing pad questions
- From: Jim Fitch <jf@arn.net>
- ATM talkalot@intplsrv.net
- From: "Jim Reid" <jimsci@bellsouth.net>
- ATM Need info on telescope workshops
- From: Joe Campbell <joe@esper.com>
- ATM Question about secondaries
- From: Joe campbell <joe@esper.com>
- ATM Public demonstration
- From: Joe Campbell <joe@esper.com>
- ATM coring mirror
- From: Joe Campbell <joe@esper.com>
- ATM coring mirror
- From: Joe Campbell <joe@esper.com>
- ATM Re: candle holder mirror
- From: Joe Campbell <joe@esper.com>
- ATM Re: Candle holder mirrors
- From: Joe Campbell <joe@esper.com>
- RE: ATM Travel Scope size restrictions
- From: Joe Goins <joe.goins@efi.com>
- RE: ATM Perferating Cassegrain (slightly off topic)
- From: Joe Goins <joe.goins@efi.com>
- ATM 12x12x0.8" astrositall blank
- From: Joe Goins <joe.goins@efi.com>
- RE: ATM Making Non-Parafocal EP's into Parafocal EP's
- From: Joe Goins <joe.goins@efi.com>
- RE: ATM 12x12x0.8" astrositall blank
- From: Joe Goins <joe.goins@efi.com>
- FW: ATM 12x12x0.8" astrositall blank
- From: Joe Goins <joe.goins@efi.com>
- RE: ATM Choosing wax to seal tile tool channels: soft and colored if possible
- From: Joe Goins <joe.goins@efi.com>
- RE: ATM Preparing a 55 gallon drum for a grinding platform
- From: Joe Goins <joe.goins@efi.com>
- ATM Ready to take the plunge!
- From: Joe Goins <joe.goins@efi.com>
- Re: ATM Glassboard...
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM more binoviewer nonsense
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM Mirror Problem Update
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM Circulating fan - air flow direction
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM is it a good idea to hot press a lap in the oven?
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM Dental Stone
- From: Joe Mayenschein <mayen1@mwt.net>
- ATM A f-2 CASS!
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM nesting aluminum tubes?
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM nesting aluminum tubes?
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM f/6 21" Status & Questions
- From: Joe Mayenschein <mayen1@mwt.net>
- Re: ATM Mol Sieve Vacuum Pump and aluminizing?
- From: "John A. Maxwell" <jmax@toad.net>
- Re: Finding optical center. Was:ATM Marking center of mirror
- From: "John A. Maxwell" <jmax@toad.net>
- Re: ATM lathe and mill
- From: "John A. Maxwell" <jmax@toad.net>
- Re: ATM lathe and mill
- From: "John A. Maxwell" <jmax@toad.net>
- Re: ATM book
- From: "John A. Maxwell" <jmax@toad.net>
- Re: ATM Help! What Metal Lathe Size?
- From: "John Anderson" <anderiii@mindspring.com>
- Re: ATM Circulating fan - air flow direction
- From: "John Anderson" <anderiii@mindspring.com>
- Re: ATM Circulating fan - air flow direction
- From: "John Anderson" <anderiii@mindspring.com>
- ATM Worm gear question.
- From: John.D.Gallagher@Hitchcock.ORG (John D. Gallagher)
- Re: ATM eyepiece storage box
- From: "John D. Upton" <jdupton@texas.net>
- Re: ATM Preparing a 55 gallon drum for a grinding platform
- From: "John D. Upton" <upton@austin.ibm.com>
- Re: ATM Preparing a 55 gallon drum for a grinding platform
- From: "John D. Upton" <upton@austin.ibm.com>
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: John Price <jmprice@cbvcp.com>
- Re: ATM Re: atm-digest V1 #2240
- From: John Price <jmprice@cbvcp.com>
- Re: ATM Circulating fan - air flow direction
- From: John Price <jmprice@cbvcp.com>
- Re: ATM Working out the TDE
- From: John Price <jmprice@cbvcp.com>
- Re: ATM Has anyone experimented with alternative methods?
- From: John Price1 <jmprice@cbvcp.com>
- Re: ATM Pics from Stellafane
- From: John Vogt <atmer@idt.net>
- ATM question about star testing?
- From: Johnny <takmais@swbell.net>
- ATM Help with University Optics mirror cell
- From: Johnny <takmais@swbell.net>
- ATM seeking info on baffeling or baffling or baffleing????
- From: Johnny <takmais@swbell.net>
- ATM Masking off primary?
- From: Johnny <takmais@swbell.net>
- ATM Newt for baffling arangements
- From: Johnny <takmais@swbell.net>
- ATM Star testing question?
- From: Johnny <takmais@swbell.net>
- ATM What to use to hold tube in tube box?
- From: Johnny <takmais@swbell.net>
- ATM REAL first light
- From: Johnny <takmais@swbell.net>
- ATM Altitude bearing smoothness?
- From: Johnny <takmais@swbell.net>
- ATM best way to "mask" primary?
- From: Johnny <takmais@swbell.net>
- ATM Question about Teflon
- From: Johnny <takmais@swbell.net>
- ATM Beginner request help
- From: Jon & Maryann <jonmary@bellnet.ne.jp>
- RE: ATM Beginner request help
- From: Jon & Maryann <jonmary@bellnet.ne.jp>
- RE: ATM Beginner request help
- From: Jon & Maryann <jonmary@bellnet.ne.jp>
- ATM Date: Thu, 31 Aug 2000 11:52:44 -0700
- From: Jon & Maryann <jonmary@bellnet.ne.jp>
- ATM Dust Cap
- From: "Jordan" <jfeder1@netzero.net>
- ATM Fixing a Quickfinder
- From: "Jordan" <jfeder1@netzero.net>
- ATM Re: Maksutov Collimation
- From: "Jordan" <jfeder1@netzero.net>
- ATM Focal legnth and coma
- From: "Jordan" <jfeder1@netzero.net>
- Re: ATM LASIK anyone?
- From: "Joseph O'Neil" <joneil@multiboard.com>
- ATM anyone use "puck board"?
- From: "Joseph O'Neil" <joneil@multiboard.com>
- Re: ATM OT : Radio Astronomy
- From: Josh Walawender <joshw@ocf.Berkeley.EDU>
- Re: ATM OT : Radio Astronomy
- From: Josh Walawender <joshw@ocf.Berkeley.EDU>
- ATM woods
- From: Josh Walawender <joshw@ocf.Berkeley.EDU>
- ATM To offset ot not to offset?
- From: Josh Walawender <joshw@ocf.Berkeley.EDU>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: Josh Walawender <joshw@ocf.Berkeley.EDU>
- RE: ATM 14.5...internet scope mirror (KEN)
- From: "jw" <ntent@win.bright.net>
- RE: ATM OTA Setup
- From: "jw" <ntent@win.bright.net>
- Re: ATM Flat black paint
- From: "jw" <ntent@win.bright.net>
- Re: ATM ronchi set up
- From: "jw" <ntent@win.bright.net>
- ATM Re: slightly off topic
- From: "jw" <ntent@win.bright.net>
- Re; ATM Thank you again
- From: "jw" <ntent@win.bright.net>
- Re ATM HELP! Damp garage and sonotube...
- From: "jw" <ntent@win.bright.net>
- ATM Final Polishing
- From: "jw" <ntent@win.bright.net>
- ATM Fw: VIRUS ALERT
- From: "jw" <ntent@win.bright.net>
- Re: ATM Virus Alert
- From: "jw" <ntent@win.bright.net>
- Re: ATM Fw. VIRUS ALERT
- From: "jw" <ntent@win.bright.net>
- ATM Virus Alert -- attn: Mel
- From: "jw" <ntent@win.bright.net>
- ATM chipped 6"
- From: "jw" <ntent@win.bright.net>
- Re: ATM drilling stainless steel
- From: "jw" <ntent@win.bright.net>
- Re: ATM chipped 6"
- From: "jw" <ntent@win.bright.net>
- ATM laser pointers
- From: "jw" <ntent@win.bright.net>
- Re: ATM laser pointers
- From: "jw" <ntent@win.bright.net>
- Re: ATM mofor Catastrophe 2 Back to the Grind
- From: "jw" <ntent@win.bright.net>
- Re: ATM 6" mirror
- From: "jw" <ntent@win.bright.net>
- Re: ATM Side bearings on dobsonian
- From: "jw" <ntent@win.bright.net>
- Re: ATM Best Counterweight Material
- From: "jw" <ntent@win.bright.net>
- Re: ATM 6" mirror
- From: "jw" <ntent@win.bright.net>
- ATM Mirror thoughts
- From: "jw" <ntent@win.bright.net>
- Re: ATM astigmatism update
- From: "jw" <ntent@win.bright.net>
- ATM 130 line slide
- From: "jw" <ntent@win.bright.net>
- ATM Eyepieces
- From: "jw" <ntent@win.bright.net>
- Re: ATM Thanks to all contributors \ Ken
- From: "jw" <ntent@win.bright.net>
- Re: ATM REALLY BIG elavation bearings....
- From: "jw" <ntent@win.bright.net>
- Re: ATM REALLY BIG elevation bearings
- From: "jw" <ntent@win.bright.net>
- Re: ATM Anamorphism?
- From: "jw" <ntent@win.bright.net>
- Re: ATM board layout problems
- From: "jw" <ntent@win.bright.net>
- Re: ATM Mirror Problem Update
- From: "jw" <ntent@win.bright.net>
- Re: ATM more binoviewer nonsense
- From: "jw" <ntent@win.bright.net>
- Re: ATM Eyepieces
- From: "jw" <ntent@win.bright.net>
- Re: ATM board layout problems
- From: "jw" <ntent@win.bright.net>
- Re: ATM Mirror Problem Update
- From: "jw" <ntent@win.bright.net>
- Re: ATM Mounts Page
- From: "jw" <ntent@win.bright.net>
- Re: ATM Eyepieces
- From: "jw" <ntent@win.bright.net>
- Re: ATM 16" "sling"?
- From: "jw" <ntent@win.bright.net>
- Re: ATM 130 line slide
- From: "jw" <ntent@win.bright.net>
- Re: ATM Anamorphism?
- From: "jw" <ntent@win.bright.net>
- Re: ATM 16" "sling"?
- From: "jw" <ntent@win.bright.net>
- Re: ATM Date Wed. 16, 2000
- From: "jw" <ntent@win.bright.net>
- ATM Fw:
- From: "jw" <ntent@win.bright.net>
- ATM Re: Ebay and the atm list
- From: "jw" <ntent@win.bright.net>
- ATM polishing bench
- From: "jw" <ntent@win.bright.net>
- ATM attn: Viper
- From: "jw" <ntent@win.bright.net>
- Re: ATM polishing bench
- From: "jw" <ntent@win.bright.net>
- Re: ATM New Feather Touch Focuser
- From: "jw" <ntent@win.bright.net>
- Re:ATM ATM on COMMERCIAL Telescopes
- From: "jw" <ntent@win.bright.net>
- Re: ATM Observing Night
- From: "jw" <ntent@win.bright.net>
- Re: Re ATM eyepiece storage box
- From: karen vanderhule <nitesite@lgcy.com>
- Re: ATM Re: End rings
- From: karen vanderhule <nitesite@lgcy.com>
- Re: ATM crystal ball polisher
- From: karen vanderhule <nitesite@lgcy.com>
- ATM turret telescope
- From: "kathleen adams" <adams@rmci.net>
- ATM atm need lost address.
- From: "kathleen adams" <adams@rmci.net>
- Re: ATM more binoviewer nonsense
- From: "kbarnes@excite.com" <kbarnes@excite.com>
- Re: ATM Reflector attached to a barn door drive
- From: "kbarnes@excite.com" <kbarnes@excite.com>
- Re: ATM 14.5... internet scope mirror
- From: Ken <lowther@worldnet.att.net>
- Re: ATM 14.5 internet scope...update
- From: Ken <lowther@worldnet.att.net>
- Re: ATM dismantled name-brand scope.
- From: Ken <lowther@worldnet.att.net>
- Re: ATM astronomy class
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Attaching and/or bending Ebony Star
- From: Ken <lowther@worldnet.att.net>
- ATM Sag software
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Need info on telescope workshops
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Apologies to all
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Catch a Wave
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Sag software
- From: Ken <lowther@worldnet.att.net>
- Re: ATM 14.5...internet scope mirror (KEN)
- From: Ken <lowther@worldnet.att.net>
- Re: ATM OT : Radio Astronomy
- From: Ken <lowther@worldnet.att.net>
- ATM Alex Dean's red flashlight project
- From: Ken <lowther@worldnet.att.net>
- ATM sharp pencils
- From: Ken <lowther@worldnet.att.net>
- Re: ATM sharp pencils
- From: Ken <lowther@worldnet.att.net>
- Re: ATM sharp pencils
- From: Ken <lowther@worldnet.att.net>
- Re: Re ATM eyepiece storage box
- From: Ken <lowther@worldnet.att.net>
- Re: ATM sharp pencils
- From: Ken <lowther@worldnet.att.net>
- Re: ATM tile tool thickness
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Virus Alert
- From: Ken <lowther@worldnet.att.net>
- Re: ATM 14.5 i.s.........polished.........
- From: Ken <lowther@worldnet.att.net>
- ATM New Mac Software page
- From: Ken <lowther@worldnet.att.net>
- ATM walk through
- From: Ken <lowther@worldnet.att.net>
- Re: ATM size DOES matter
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Harbor Freight
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Major Catastrophe!
- From: Ken <lowther@worldnet.att.net>
- Re: ATM What is easyier for beginer?
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Major Catastrophe 2: Back to the Grind
- From: Ken <lowther@worldnet.att.net>
- Re: ATM size DOES matter
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Catostrophy...
- From: Ken <lowther@worldnet.att.net>
- Re: ATM anyone use "puck board"?
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Mirror cell thoughts
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Mirror cell thoughts
- From: Ken <lowther@worldnet.att.net>
- Re: ATM 6" mirror
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Mirror cell thoughts
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Mirror cell thoughts
- From: Ken <lowther@worldnet.att.net>
- Re: ATM size DOES matter
- From: Ken <lowther@worldnet.att.net>
- Re: ATM 6" mirror
- From: Ken <lowther@worldnet.att.net>
- Re: ATM blades and tile
- From: Ken <lowther@worldnet.att.net>
- Re: ATM astigmatism update
- From: Ken <lowther@worldnet.att.net>
- ATM update to Oslo files
- From: Ken <lowther@worldnet.att.net>
- Re: ATM 16 inch blank
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Re: 17 1/4 quartz blank on eBay
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Eyepiece design - efl 60 mm - AFOV 60 deg
- From: Ken <lowther@worldnet.att.net>
- ATM Thanks to all contributers
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Thanks to all contributers
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Re: 17 1/4 quartz blank on eBay
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Thanks to all contributers
- From: Ken <lowther@worldnet.att.net>
- ATM pupil dilation
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Splitting a 1.5" *1" blank
- From: Ken <lowther@worldnet.att.net>
- Re: ATM seeking info on baffeling or baffling or baffleing????
- From: Ken <lowther@worldnet.att.net>
- ATM new page
- From: Ken <lowther@worldnet.att.net>
- ATM NEWT2.5
- From: Ken <lowther@worldnet.att.net>
- ATM David Rowe's Figure Program
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Thanks to all contributors \ Ken
- From: Ken <lowther@worldnet.att.net>
- Re: ATM is it a good idea to hot press a lap in the oven?
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Dew heater
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Mirror Problem Update
- From: Ken <lowther@worldnet.att.net>
- Re: ATM REALLY BIG elavation bearings....
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Circulating fan - air flow direction
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Mirror Problem Update
- From: Ken <lowther@worldnet.att.net>
- ATM board layout programs
- From: Ken <lowther@worldnet.att.net>
- Re: ATM mirror sides and back, how smooth
- From: Ken <lowther@worldnet.att.net>
- Re: ATM mirror sides and back, how smooth
- From: Ken <lowther@worldnet.att.net>
- Re: ATM is it a good idea to hot press a lap in the oven?
- From: Ken <lowther@worldnet.att.net>
- Re: ATM 16" "sling" ??
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Rough Figure Confirmed
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Dental Stone
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Mounts Page
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Mounts Page
- From: Ken <lowther@worldnet.att.net>
- Re: ATM 16" "sling" ??
- From: Ken <lowther@worldnet.att.net>
- Re: ATM board layout programs - why?
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Star testing question?
- From: Ken <lowther@worldnet.att.net>
- ATM Re:
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Curious Observation
- From: Ken <lowther@worldnet.att.net>
- ATM Re: Addition to the archive
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Mirror cell thoughts
- From: Ken <lowther@worldnet.att.net>
- Re: ATM atm
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Number of Zones in the Couder mask
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Grit advice needed
- From: Ken <lowther@worldnet.att.net>
- Re: ATM wave front/surface error confusion
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Testing 13.25" f/3.09 mirror
- From: Ken <lowther@worldnet.att.net>
- Re: ATM polishing bench
- From: Ken <lowther@worldnet.att.net>
- Re: ATM OT unsubscribe for vacation?
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Need for cheap/used worm gear
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Preliminary test results on 4.25 F4.9
- From: Ken <lowther@worldnet.att.net>
- ATM New page and 'request'
- From: Ken <lowther@worldnet.att.net>
- ATM Zemax files
- From: Ken <lowther@worldnet.att.net>
- ATM New online calculator
- From: Ken <lowther@worldnet.att.net>
- Re: ATM cheap glass sources
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Re: FOCAL PLANE FOUND - THANKS
- From: Ken <lowther@worldnet.att.net>
- Re: ATM field of sterility
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Central obstruction definition
- From: Ken <lowther@worldnet.att.net>
- Re: ATM Has anyone experimented with alternative methods?
- From: Ken <lowther@worldnet.att.net>
- Re: ATM newt
- From: Ken <lowther@worldnet.att.net>
- Re: ATM re:Hydrometer/Baume
- From: Ken <lowther@worldnet.att.net>
- Re: ATM In defense of Tasco
- From: Ken <lowther@worldnet.att.net>
- Re: ATM In defense of Tasco
- From: Ken <lowther@worldnet.att.net>
- Re: ATM f/6 21" Status & Questions
- From: Ken <lowther@worldnet.att.net>
- Re: ATM f/6 21" Status & Questions
- From: Ken <lowther@worldnet.att.net>
- Re: ATM magnetic altitude bearings
- From: Ken <lowther@worldnet.att.net>
- Re: ATM P-V vs. RMS
- From: Ken <lowther@worldnet.att.net>
- Re: ATM sharpie test
- From: Ken & Teresa Lilja <klilja@atl.mediaone.net>
- RE: ATM Glassboard...
- From: "Ken Bertapelle" <kenb@cqg.com>
- Finding optical center. Was:ATM Marking center of mirror
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM Large mirror blanks
- From: "Ken Bertapelle" <kenb@cqg.com>
- ATM 21" f/6 - Rough Grinding
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM Thanks to all contributers
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM Bonding Black Felt to Stained Wood
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM Preparing a 55 gallon drum for a grinding platform
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM polishing bench
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM Scratch during initial polishing...question
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM cementing glass.......? 14.5 i.s.
- From: "Ken Bertapelle" <kenb@cqg.com>
- RE: ATM Interferometry analysis of 25"
- From: "Ken Bertapelle" <kenb@cqg.com>
- ATM f/6 21" Status & Questions
- From: "Ken Bertapelle" <kenb@cqg.com>
- Re: ATM 14.5..internet scope..test equipment
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM: Where is Clausing?
- From: Ken Hunter <kb7h@ccaonline.com>
- ATM Apologies to all
- From: Ken Hunter <kb7h@ccaonline.com>
- ATM Harbor Freight
- From: Ken Hunter <kb7h@ccaonline.com>
- Re: ATM Harbor Freight
- From: Ken Hunter <kb7h@ccaonline.com>
- ATM Catostrophy...
- From: Ken Hunter <kb7h@ccaonline.com>
- ATM mirror cell
- From: Ken Hunter <kb7h@ccaonline.com>
- ATM Major Catastrophe 2: Back to the Grind
- From: Kenneth Scharf <scharkalvin@yahoo.com>
- No Subject
- From: Kenneth Scharf <scharkalvin@yahoo.com>
- ATM removing coating
- From: Kenneth Scharf <scharkalvin@yahoo.com>
- Re: ATM Field De-rotator Question, and an Important Alternate Scope Design
- From: Kevin McCarthy <sigma@mediaone.net>
- ATM Zemax files in Oslo
- From: "Klaas Honders" <k.honders@worldonline.nl>
- ATM Date: Mon, 28 Aug 2000 22:29:32 +0200
- From: "Klaas Honders" <k.honders@worldonline.nl>
- ATM hydrometer/Baumé
- From: "Klaas Honders" <k.honders@worldonline.nl>
- RE: ATM Catch a Wave
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM Catch a Wave
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM Stellafane Report; Computer Assisted Digital Figure Analysis
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM Portable power...
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM balance
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATMs in Maine
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM ronchi set up
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- ATM Surface preparation for galvanized sheet metal for roller bearing motion
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: Off Topic (was: ATM Mirror cell thoughts)
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM Mirror cell thoughts
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM Mirror cell thoughts
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM Best Counterweight Material ?
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM Mirror cell thoughts
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM Mirror cell thoughts
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM woods
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM To offset or not to offset?
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM silicone pads
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM more binoviewer nonsense
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM more binoviewer nonsense
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- ATM Woven Teflon (was REALLY BIG elevation bearings...)
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM 16" "sling"?
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM Cooling fans - blow sideways like the pro's
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM more binoviewer nonsense
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM Mirrors and dust.....
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM more binoviewer nonsense
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM more binoviewer nonsense
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- RE: ATM more binoviewer nonsense
- From: Krajci Tom J Maj 27 OSS/IN <Tom.Krajci@cannon.af.mil>
- ATM New way to pour a pitch lap
- Re: ATM size DOES matter
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- Re: ATM is it a good idea to hot press a lap in the oven?
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- ATM Spherical surfaces
- Re: ATM Question for Hockey Puck Users
- ATM Number of Zones in the Couder mask
- Re: ATM Number of Zones in the Couder mask
- ATM Testing 13.25" f/3.09 mirror
- Re: SV: ATM Number of Zones in the Couder mask
- Re: ATM Portable power...
- From: Larry Arnold <larry19@home.com>
- Re: ATM Marking center of mirror
- From: Larry Arnold <larry19@home.com>
- Re: ATM Cutting Circles of Aluminum 2: Controversy!
- From: Larry Arnold <larry19@home.com>
- Re: ATM : Anamorphism?
- From: Larry Arnold <larry19@home.com>
- Re: ATM cheap glass sources
- From: Larry Arnold <larry19@home.com>
- ATM Woodshop eyepiece success!!!
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM A question of fit
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM Finder fov calculation???
- From: Lawrence Sayre <lsayre@stratos.net>
- ATM Candle Holder Mirror question
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM Candle Holder Mirror question
- From: Lawrence Sayre <lsayre@stratos.net>
- Re: ATM best way to "mask" primary?
- From: "Leonard Tramiel" <leonard@tramiel.org>
- ATM: Gugolz 55 pitch
- From: lindberg <lindberg@olywa.net>
- ATM: Gulolz 55 pitch
- From: lindberg <lindberg@olywa.net>
- Re: ATM more binoviewer nonsense
- From: lindberg <lindberg@olywa.net>
- Re: ATM Preparing a 55 gallon drum for a grinding platform
- From: lindberg <lindberg@olywa.net>
- Re: ATM Preparing a 55 gallon drum for a grinding platform
- From: lindberg <lindberg@olywa.net>
- ATM tile tool thickness
- ATM strokes
- ATM sharpie test
- ATM sharpie test
- ATM Thanks Rocky
- ATM grit size
- ATM a few queries
- ATM off axis guiding
- ATM Focus dept
- From: Lorenzi Marco <mka@sicon-ups.com>
- ATM Optical manufacturer
- From: Lorenzi Marco <mka@sicon-ups.com>
- DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
- From: Mail System Internal Data <MAILER-DAEMON@system.umsystem.edu>
- Re: ATM a new beamsplitter? was ATM more binoviewer nonsense
- From: Malcolm Macdonald <toliman@wave.co.nz>
- Re: ATM OT : Radio Astronomy
- From: "Mark Alsing" <malsing@borg.csocsg.net>
- Re: ATM question about star testing?
- From: mark cowan <cowanm@open.org>
- Re: ATM: Continue Polishing or Back to Fine Grinding?
- From: mark cowan <cowanm@open.org>
- Re: ATM Primary mirror support in the horizontal plane (Nastran plots
- From: "Mark D. Holm" <mdholm@telerama.com>
- Re: ATM Travel Scope size restrictions
- From: "Mark E. Miller" <memiller@net-link.net>
- Re: ATM: Continue Polishing or Back to Fine Grinding?
- From: "Mark E. Miller" <memiller@net-link.net>
- Re: ATM Homegrown milling machine(?)
- From: "Mark E. Miller" <memiller@net-link.net>
- ATM Laser Pointers
- From: "Mark Rice" <mark@codewayb.demon.co.uk>
- Re: ATM astigmatism update
- From: "Mark Rice" <mark@codewayb.demon.co.uk>
- ATM Not commercial microstepping driver
- From: "Mark Rice" <mark@codewayb.demon.co.uk>
- RE: ATM Not commercial microstepping driver
- From: "Mark Rice" <mark@codewayb.demon.co.uk>
- Re: ATM 14.5..internet scope..test equipment
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM 14.5 update
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM 14.5.I.S..........secondary
- From: Marty.T@t-online.de (Martin Trittelvitz)
- [Fwd: ATM 14.5........focal legnth..72 .312]
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM 14.5........focal legnth..72 .312
- From: Marty.T@t-online.de (Martin Trittelvitz)
- Re: ATM 14.5........focal legnth..72 .312
- From: Marty.T@t-online.de (Martin Trittelvitz)
- ATM The accuracy of PLOP
- From: "Martti Koskimo" <marakos@saunalahti.fi>
- ATM RE: Interferometer
- From: "Martti Koskimo" <marakos@saunalahti.fi>
- Re: ATM RE: Interferometer
- From: "Martti Koskimo" <marakos@saunalahti.fi>
- ATM Info about stepping motor
- ATM Not commercial microstepping driver
- Re: ATM HELP! Damp garage and sonotube...
- Re: ATM Side bearing on dobsonian
- Re: ATM Source for mounting ring hinges
- Re: ATM Super Simple Side Bearings
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob
- Re: ATM astigmatism update
- Re: ATM astigmatism update
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob
- Re: ATM What to use to hold tube in tube box?
- Re: ATM Worm gear question
- Re: ATM more binoviewer nonsense
- Re: ATM sharpie test
- Re: ATM Observing Night
- ATM ultra thin mirror
- From: "Mathai, John" <MathaiJ@msx.dept-med.pitt.edu>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: Mauritz Andersson <mauritz.andersson@Kvac.UU.SE>
- RE: ATM a new beamsplitter? was ATM more binoviewer nonsense
- From: "McHatten, Shawn" <Shawn.McHatten@aliant.ca>
- ATM RE: Where is Clausing?
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM ronchi set up
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATMs in Maine
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Travel Scope size restrictions
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM A Question To My Peers Ref Grinding
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Final Polishing
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Fw. VIRUS ALERT
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Fw: VIRUS ALERT
- From: "Mel Bartels" <mbartels@efn.org>
- ATM crystal ball polisher
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Mirror cell thoughts
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM S&T article on geodesic dome project
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Info about stepping motor
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Mirror cell thoughts
- From: "Mel Bartels" <mbartels@efn.org>
- ATM Fred Veio
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Mirror Problem Update
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM book
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM found.
- From: "Mel Bartels" <mbartels@efn.org>
- ATM FW: Proto circuit boards for projects
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Not commercial microstepping driver
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Combine Newton/MX916 CCD ?
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM A f-2 CASS!
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Beginner request help
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Beginner request help
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Cooling fans - blow sideways like the pro's
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Uneven tiles
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Not commercial microstepping driver
- From: "Mel Bartels" <mbartels@efn.org>
- ATM ImageTheSky conference Nov 2000 in Salem Oregon
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Cooling fans - blow sideways like the pro's
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM OT unsubscribe for vacation?
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM DSCs vs Bartel's Scopedrive
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM DSCs vs Bartel's Scopedrive
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM DSCs vs Bartel's Scopedrive
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Field de-rotator questions
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM RE: DSCs vs Bartel's Scopedrive
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM grit size
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Field de-rotator questions
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Effects of an Off Center Secondary
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM Scratch during initial polishing...question
- From: "Mel Bartels" <mbartels@efn.org>
- comment from list owner, was RE: ATM made in the USA
- From: "Mel Bartels" <mbartels@efn.org>
- msg from list owner, was RE: ATM New Feather Touch Focuser
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM newt
- From: "Mel Bartels" <mbartels@efn.org>
- RE: ATM newt
- From: "Mel Bartels" <mbartels@efn.org>
- ATM flat making and the atm list
- From: "Mel Bartels" <mbartels@efn.org>
- Re: ATM mirrorbox not exactly square
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Tim Reports 1: first spastic Foucault tests
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM slightly off topic
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM HELP! Damp garage and sonotube...
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM problem with mirror cell
- From: Michael Coslo <mjc5@psu.edu>
- ATM Bino viewers
- From: Michael Coslo <mjc5@psu.edu>
- ATM Spider Vane repair, Scope balance and second first light
- From: Michael Coslo <mjc5@psu.edu>
- Re: Finding optical center. Was:ATM Marking center of mirror
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Side bearing on dobsonian
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Cutting circles of aluminum
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Mirror cell thoughts
- From: Michael Coslo <mjc5@psu.edu>
- RE: ATM Mirror cell thoughts
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Mirror Cell
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM 6" mirror
- From: Michael Coslo <mjc5@psu.edu>
- RE: ATM Cutting Circles of Aluminum 2: Controversy!
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Best Counterweight Material ?
- From: Michael Coslo <mjc5@psu.edu>
- RE: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM: Gugolz 55 pitch
- From: Michael Coslo <mjc5@psu.edu>
- RE: ATM Circulating fan for primary
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Circulating fan - air flow direction
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM more binoviewer nonsense
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Eyepieces
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM board layout, what resist?
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Star testing question?
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM more binoviewer nonsense
- From: Michael Coslo <mjc5@psu.edu>
- RE: ATM Cooling fans - blow sideways like the pro's
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM 16 inch
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Do I have TDE?
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Cassegrain, Without Plug
- From: Michael Coslo <mjc5@psu.edu>
- Re: Focuser position (was RE: ATM Re: In defense of blah, blah,blah. ..)
- From: Michael Coslo <mjc5@psu.edu>
- Re: ATM Cleaning aluminum
- From: Michael Coslo <mjc5@psu.edu>
- ATMs in Maine?
- From: "Michael D. Crawford" <crawford@goingware.com>
- Re: ATMs in Maine
- From: "Michael D. Crawford" <crawford@goingware.com>
- Re: ATM Fw: VIRUS ALERT
- From: "Michael D. Crawford" <crawford@goingware.com>
- Re: ATM Combine Newton/MX916 CCD ?
- From: Michael Gregory <mikeg@airmail.net>
- RE: ATM Combine Newton/MX916 CCD ?
- From: Michael Gregory <mikeg@airmail.net>
- Re: ATM Thin aluminium tube in Frnace
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM size DOES matter
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM: Stress
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM Center of gravity of semicircular elevation bearings
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM Cooling fans - blow sideways like the pro's
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM Cooling fans - blow sideways like the pro's
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM Cooling fans - blow sideways like the pro's
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM Removing gold coatings
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM DSCs vs Bartel's Scopedrive
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM DSCs vs Bartel's Scopedrive
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM Field de-rotator questions
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM Field de-rotator questions
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM a new beamsplitter? was ATM more binoviewer nonsense
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM Re: Equatorial platform field rotation
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM a new beamsplitter? was ATM more binoviewer nonsense
- From: astro.electronic@t-online.de (Michael Koch)
- Re: Re[2]: ATM a new beamsplitter? was ATM more binoviewer nonsense
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM Primary mirror support in the horizontal plane (Nastran plots)
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM 21" F/6: response about sagitta equations
- From: astro.electronic@t-online.de (Michael Koch)
- Re: ATM Center of gravity of semicircular elevation bearings
- From: Michael Koloski <mkoloski@OregonVOS.net>
- Re: ATM sharp pencils
- From: Michael Lindner <mikel@att.net>
- Re: ATM sharp pencils
- From: Michael Lindner <mikel@att.net>
- Re: ATM 14.5...internet scope mirror (KEN)
- From: Michael Lindner <mikel@att.net>
- Re: ATM Cell design: 6 points better than 9 ???
- From: Michael Lindner <mikel@att.net>
- ATM SW for Linux
- From: Michael Lindner <mikel@att.net>
- Re: ATM ultra thin mirror
- From: Michael Lindner <mikel@att.net>
- Re: ATM Mirror Newbie...
- From: Michael Lindner <mikel@att.net>
- Re: ATM Re: atm-digest V1 #2240
- From: Michael Lindner <mikel@att.net>
- Re: ATM What to use to hold tube in tube box?
- From: Michael Lindner <mikel@att.net>
- Re: ATM more binoviewer nonsense
- From: Michael Lindner <mikel@att.net>
- Re: ATM more binoviewer nonsense
- From: Michael Lindner <mikel@att.net>
- Re: ATM New Feather Touch Focuser?
- From: Michael Lindner <mikel@att.net>
- Re: ATM New Feather Touch Focuser?
- From: Michael Lindner <mikel@att.net>
- Re: ATM made in the USA
- From: Michael Peck <mpeck1@ix.netcom.com>
- Re: ATM Glassboard...
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM Cassegrain, Without Plug
- From: spooner@page.az.net (Michael Spooner)
- Re: ATM Question for Hockey Puck Users
- From: Mike <lx50@videotron.ca>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: Mike Barrs <mbarrs@nightviewer.com>
- Re: ATM Interferometry analysis of 25"
- From: Mike Barrs <mbarrs@nightviewer.com>
- Re: ATM Interferometry analysis of 25"
- From: Mike Barrs <mbarrs@nightviewer.com>
- Re: ATM Interferometry analysis of 25"
- From: Mike Barrs <mbarrs@nightviewer.com>
- Wilson's "Reflecting Telescope Optics" (Was: Re: ATM Interferometry)
- From: Mike Barrs <mbarrs@nightviewer.com>
- Re: ATM Metal Mirrors
- From: Mike Barrs <mbarrs@nightviewer.com>
- Re: ATM Metal Mirrors
- From: Mike Barrs <mbarrs@nightviewer.com>
- RE: ATM Mol Sieve Vacuum Pump and aluminizing?
- From: Mike Gerfen <mgerfen@caltech.edu>
- Re: ATM Need info on telescope workshops
- From: mjc5 <mjc5@psu.edu>
- Re: ATM sharp pencils
- From: mjc5 <mjc5@psu.edu>
- Re: ATM more bearings
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Side bearing on dobsonian
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Focuser Placement Problem
- From: mjc5 <mjc5@psu.edu>
- ATM more binoviewer nonsense
- From: mjc5 <mjc5@psu.edu>
- Re: ATM is it a good idea to hot press a lap in the oven?
- From: mjc5 <mjc5@psu.edu>
- ATM Dew heater
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Circulating fan - air flow direction
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Newt for baffling arangements
- From: mjc5 <mjc5@psu.edu>
- Re: ATM atm
- From: mjc5 <mjc5@psu.edu>
- ATM Re:
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Question for Hockey Puck Users
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Removing gold coatings
- From: mjc5 <mjc5@psu.edu>
- Re: ATM more shop tips
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Question about Teflon
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Re: American pride ?c-------- is a joke
- From: mjc5 <mjc5@psu.edu>
- In defense of people who make their own telescopes- was Re: ATM In defense of Tasco
- From: mjc5 <mjc5@psu.edu>
- Re: ATM Re: In defense of blah, blah, blah...
- From: mjc5 <mjc5@psu.edu>
- ATM New Feather Touch Focuser?
- From: "N. Foldager" <nf@dadlnet.dk>
- ATM Length of draw tube?
- From: "N. Foldager" <nf@dadlnet.dk>
- ATM 14.5 internet scope...update
- From: "natsp" <natsp@alltel.net>
- ATM Hello Ken Hunter, From Paula
- From: "natsp" <natsp@alltel.net>
- ATM 14.5 update
- From: "natsp" <natsp@alltel.net>
- ATM simplified beginer foucalt tester & theory
- From: "natsp" <natsp@alltel.net>
- ATM 14.5 I.S.............back to #1000
- From: "natsp" <natsp@alltel.net>
- ATM 14.5 i.s.........polished.........
- From: "natsp" <natsp@alltel.net>
- ATM 14.5........focal legnth..72 .312
- From: "natsp" <natsp@alltel.net>
- ATM 14.5.I.S..........secondary
- From: "natsp" <natsp@alltel.net>
- Re: ATM shooting the tubes
- From: "natsp" <natsp@alltel.net>
- ATM mirror box
- From: "natsp" <natsp@alltel.net>
- ATM 14.5 i.s. back to #3
- From: "natsp" <natsp@alltel.net>
- Re: ATM Need for cheap/used worm gear
- From: "natsp" <natsp@alltel.net>
- ATM mels stepper circut
- From: "natsp" <natsp@alltel.net>
- ATM atm,,,,,,,,,,,,,,,mail
- From: "natsp" <natsp@alltel.net>
- ATM low cost secondarys
- From: "natsp" <natsp@alltel.net>
- Re: ATM Removing gold coatings
- From: "natsp" <natsp@alltel.net>
- ATM 14.5 internet scope update possable conclusion...
- From: "natsp" <natsp@alltel.net>
- ATM porthole glass
- From: "natsp" <natsp@alltel.net>
- ATM cementing glass.......? 14.5 i.s.
- From: "natsp" <natsp@alltel.net>
- ATM Re: American pride ?celestron is a joke
- From: "natsp" <natsp@alltel.net>
- Re: ATM cementing glass.......? 14.5 i.s.
- From: "natsp" <natsp@alltel.net>
- ATM inexpencive ccd and focus moters
- From: "natsp" <natsp@alltel.net>
- Re: ATM In defense of Tasco
- From: "natsp" <natsp@alltel.net>
- Re: ATM Re: American pride ?c-------- is a joke
- From: "natsp" <natsp@alltel.net>
- Re: An ATM on COMMERCIAL Telescopes
- From: "natsp" <natsp@alltel.net>
- Re: ATM I've cracked it ! - help please
- From: "natsp" <natsp@alltel.net>
- Re: ATM Re: American pride ?c-------- is a joke
- From: "natsp" <natsp@alltel.net>
- ATM re; american pride-comercial telescopes
- From: "natsp" <natsp@alltel.net>
- ATM c-8 drive upgrades...?
- From: "natsp" <natsp@alltel.net>
- Re: ATM magnetic altitude bearings
- From: "natsp" <natsp@alltel.net>
- Re: ATM Re: In defense of *Teflon*
- ATM Ultra-Light Planning
- ATM ronchi set up
- From: Nick Cain <nick.cain@navisworks.com>
- ATM: Rosco flat black paint update
- From: nickz@floodcity.net
- Re: ATM board layout programs - why?
- From: nickz@floodcity.net
- ATM Experiments with PLOP [long]
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: Finding optical center. Was:ATM Marking center of mirror
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Cell design: 6 points better than 9 ???
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- RE: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Mirror cell thoughts
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Newt for baffling arangements
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Eyepieces
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Re: 25" scope
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Finder fov calculation???
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Number of Zones in the Couder mask
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Cooling fans - blow sideways like the pro's
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Cooling fans - blow sideways like the pro's
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM reducing the weight
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM more binoviewer nonsense
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re[2]: ATM Re: FOCAL PLANE FOUND - THANKS
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM f/6 21" Status & Questions
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Interferometry analysis of 25"
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- SV: ATM Interferometry vs. Legacy Testing
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM P-V vs. RMS
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- Re: ATM 21" F/6: response about sagitta equations
- From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
- ATM Circulating fan for primary
- ATM Circulating fan - air flow direction
- Re: ATM What to use to hold tube in tube box?
- From: Paul Cousoulis <paulcsouls@worldnet.att.net>
- Re: ATM board layout programs
- From: "Paul Hettrick" <P.Hettrick@bom.gov.au>
- RE: ATM Travel Scope size restrictions
- From: "Paul LeFevre" <lefevre@midway.com>
- RE: ATM Travel Scope size restrictions
- From: "Paul LeFevre" <lefevre@midway.com>
- RE: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: "Paul LeFevre" <lefevre@midway.com>
- RE: ATM Circulating fan for primary
- From: "Paul LeFevre" <lefevre@midway.com>
- RE: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: "Paul LeFevre" <lefevre@midway.com>
- RE: ATM 16" "sling"?
- From: "Paul LeFevre" <lefevre@midway.com>
- RE: ATM Question for Hockey Puck Users
- From: "Paul LeFevre" <lefevre@midway.com>
- Re: ATM eyepiece storage box
- From: "Paul Stock" <comabereni@earthlink.net>
- ATM JMI focuser
- From: Paul&Kim Weiler <kwpw@earthlink.net>
- ATM JMI focuser
- From: Paul&Kim Weiler <kwpw@earthlink.net>
- ATM
- From: "pbal" <pbal@powercom.net>
- Re: Serious over correction (was ATM)
- From: "pbal" <pbal@powercom.net>
- ATM index to Sci Am amateur science columns
- From: Peter Abrahams <telscope@europa.com>
- Re: ATM source of porthole glass?
- From: Peter Chen <chen@stars.gsfc.nasa.gov>
- ATM magnetic altitude bearings
- From: Peter Chen <chen@stars.gsfc.nasa.gov>
- Re: ATM magnetic altitude bearings
- From: Peter Chen <chen@stars.gsfc.nasa.gov>
- Re: ATM Ranker
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Mol Sieve Vacuum Pump and aluminizing?
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Help! What Metal Lathe Size?
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM size DOES matter
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM more bearings
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM size DOES matter
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Harbor Freight
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM lathe and mill
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM lathe and mill
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM wax,'dops'&cerro-cast
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Re: working Sainless Steel
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Re: American pride ?c-------- is a joke
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Preparing a 55 gallon drum for a grinding platform
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Cleaning aluminum
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Re: 55 gal drum
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Date: Thu, 31 Aug 2000 11:52:44 -0700
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM finishing alum.
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Metal Mirrors
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM 21" F/6: response about sagitta equations
- From: "Peter D. Brooks" <pdbrooks@pacbell.net>
- Re: ATM Stellafane Report; Computer Assisted Digital Figure Analysis
- From: "Peter John Smith" <pjifl@bigpond.com>
- Re: ATM lathe and mill
- From: "Peter John Smith" <pjifl@bigpond.com>
- Re: ATM Help! What Metal Lathe Size
- From: "Peter John Smith" <pjifl@bigpond.com>
- ATM Eyepiece design - efl 60 mm - AFOV 60 deg
- From: "Peter John Smith" <pjifl@bigpond.com>
- Re: ATM Eyepiece design - efl 60 mm - AFOV 70 deg
- From: "Peter John Smith" <pjifl@bigpond.com>
- Re: ATM OT: Astronomical dividing head
- From: "Peter John Smith" <pjifl@bigpond.com>
- ATM 70 mm Extreme field eyepiece - 80 deg.
- From: "Peter John Smith" <pjifl@bigpond.com>
- Re: ATM cutting Stainless Steel?
- From: "Peter John Smith" <pjifl@bigpond.com>
- ATM Cheap Glass options and tolerances
- From: "Peter John Smith" <pjifl@bigpond.com>
- ATM OHara Glass Equivalents for recent eyepieces
- From: "Peter John Smith" <pjifl@bigpond.com>
- Re: ATM RE: Cheap Glass options and tolerances
- From: "Peter John Smith" <pjifl@bigpond.com>
- Re: ATM Re:Jon & MaryAnn doing flats
- From: "Peter John Smith" <pjifl@bigpond.com>
- Re ATM Aligning finders with main scope
- From: "Peter Jones" <pmjco@email.msn.com>
- Re ATM eyepiece storage box
- From: "Peter Jones" <pmjco@email.msn.com>
- Re ATM Storage Boxes and Aligning Finders with Main Scope
- From: "Peter Jones" <pmjco@email.msn.com>
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: "Peter Jones" <pmjco@email.msn.com>
- ATM Refractor objective mounting; oil spacing
- From: "Philip J. Tramdack" <tramdack@TCNJ.EDU>
- Re: ATM Spacing Achromatic Lenses
- From: "Philip J. Tramdack" <tramdack@TCNJ.EDU>
- Re: ATM Best Counterweight Material
- From: "Philip J. Tramdack" <tramdack@TCNJ.EDU>
- Re: ATM aluminizing mirror
- From: "Philip J. Tramdack" <tramdack@TCNJ.EDU>
- Re: ATM Refractor objective mounting; oil spacing
- From: Philip Tramdack <tramdack@TCNJ.EDU>
- ATM Focusers
- From: Philip Tramdack <tramdack@TCNJ.EDU>
- Fwd: Re: ATM Refractor objective mounting; oil spacing
- From: Philip Tramdack <tramdack@TCNJ.EDU>
- Fwd: Re: ATM Refractor objective mounting; oil spacing
- From: Philip Tramdack <tramdack@TCNJ.EDU>
- ATM coude optical path
- From: "Phillip Smith" <hapchap@bigpond.com>
- ATM First Light Report - or - 2dayirnatm
- From: PK6811S@ACAD.DRAKE.EDU
- Re: ATM more binoviewer nonsense
- From: PK6811S@ACAD.DRAKE.EDU
- Re: ATM a new beamsplitter? was ATM more binoviewer nonsense
- From: PK6811S@ACAD.DRAKE.EDU
- ATM Paracorr at F2.8 ?
- From: "Poul Linnet" <kam1842@vip.cybercity.dk>
- ATM re: aligning finders with main scope
- From: "Reed Spaulding" <shellac@together.net>
- Re: ATM annealing
- From: "Reed Spaulding" <shellac@together.net>
- ATM Large mirror question
- From: "Reed Spaulding" <shellac@together.net>
- Re: ATM atm
- From: Regis Krug <regis_krug@mentorg.com>
- Re: ATM Question for Hockey Puck Users
- From: Regis Krug <regis_krug@mentorg.com>
- ATM Problem with cell.exe
- From: "rguinamard" <rguinamard@infonie.fr>
- ATM Thin aluminium tube in Frnace
- From: "rguinamard" <rguinamard@infonie.fr>
- Re: ATM Glassboard...
- From: "rguinamard" <rguinamard@infonie.fr>
- Re: ATM Thin aluminium tube in Frnace
- From: "rguinamard" <rguinamard@infonie.fr>
- ATM Cell design: 6 points better than 9 ???
- From: "rguinamard" <rguinamard@infonie.fr>
- Re: ATM Cell design: 6 points better than 9 ???
- From: "rguinamard" <rguinamard@infonie.fr>
- Re: ATM Mirror cell thoughts
- From: "rguinamard" <rguinamard@infonie.fr>
- Re: ATM Mirror cell thoughts
- From: "rguinamard" <rguinamard@infonie.fr>
- Re: ATM Primary mirror support in the horizontal plane (Nastran plots)
- From: "rguinamard" <rguinamard@infonie.fr>
- Re: ATM RE: Interferometer
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Primary mirror support in the horizontal plane (Nastran plots)
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Interferometry analysis of 25"
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Interferometry analysis of 25"
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Lightweight primaries
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Lightweight primaries (Was Metal Mirrors)
- From: Ric Rokosz <bz737@freenet.toronto.on.ca>
- Re: ATM Travel Scope size restrictions
- From: Richard Chalfan <rchalfan@yahoo.com>
- Re: ATM Eyepieces
- From: Richard Chalfan <rchalfan@yahoo.com>
- RE: Re ATM eyepiece storage box
- From: "Richard L. Klappal" <klappal@xnet.com>
- RE: ATM Rotten Weekend
- From: Richard Ozer <rozer@ois-online.com>
- RE: ATM Question for Hockey Puck Users
- From: Richard Ozer <rozer@ois-online.com>
- RE: ATM DSCs vs Bartel's Scopedrive
- From: Richard Ozer <rozer@ois-online.com>
- RE: ATM Preparing a 55 gallon drum for a grinding platform
- From: Richard Ozer <rozer@ois-online.com>
- Re: ATM mirrorbox not exactly square
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM Problem with cell.exe
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM Re: Catch a Wave
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM Ranker
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM LASIK anyone?
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM sharp pencils
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM Marking center of mirror
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM Harbor Freight
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM 14.5.I.S..........secondary
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM Major Catastrophe!
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM What is easyier for beginer?
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM Mirror cell thoughts
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM: Stress
- From: "Richard Schwartz" <richas@idt.net>
- ATM Re: Dang hard speculum metal
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM Mirror cell thoughts
- From: "Richard Schwartz" <richas@idt.net>
- ATM Rock Shop in Utah
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM S&T article on geodesic dome project
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM 6" Mirror
- From: "Richard Schwartz" <richas@idt.net>
- ATM Re: Anamorphism?
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM Mirror Problem Update
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM A question of fit
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM glueing mirror to cell
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM Finder fov calculation???
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM low cost secondarys
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM Scratch during initial polishing...question
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM 21" F/6: response about sagitta equations
- From: "Richard Schwartz" <richas@idt.net>
- Re: ATM New Feather Touch Focuser?
- From: "Rick Overgaard" <raover@flash.net>
- Re: ATM Help! What Metal Lathe Size?
- From: Rick Scott <rmscott@home.com>
- Re: ATM found.
- From: Rick Scott <rmscott@home.com>
- ATM John Gregory's Houghton Scope?
- From: Rick Scott <rmscott@home.com>
- Re: ATM FOCAL PLANE QUESTIONS
- From: Rick Scott <rmscott@home.com>
- ATM 16 inch blank
- From: "Rob" <tequila@cdc.net>
- ATM found.
- From: "Rob" <tequila@cdc.net>
- ATM 16 inch
- From: "Rob" <tequila@cdc.net>
- ATM opps
- From: "Rob" <tequila@cdc.net>
- ATM Date: Wed, 16 Aug 2000 02:27:31 -0400
- From: "Rob" <tequila@cdc.net>
- ATM atm
- From: "Rob" <tequila@cdc.net>
- ATM atm
- From: "Rob" <tequila@cdc.net>
- ATM Date: Thu, 17 Aug 2000 21:16:16 -0400
- From: "Robert Perkins" <divemd@ifreedom.com>
- ATM Re: FOCAL PLANE FOUND - THANKS
- From: Rocky <wb5ftr@mvpisp.com>
- ATM Grinding Machine Questions
- From: Rod Brackenridge <rjb@netconnect.com.au>
- ATM Making a Replica of Galileo's Telescope
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM RE: Cheap Glass options and tolerances
- From: Roger Ceragioli <rogerc@dakotacom.net>
- ATM Spacing Achromatic Lenses
- From: Roger Ceragioli <rogerc@dakotacom.net>
- Re: ATM Perferating Cassegrain (slightly off topic)
- From: "Ron Dyvig" <rondyv@gwtc.net>
- Re: ATM coring mirror
- From: "Ron Dyvig" <rondyv@gwtc.net>
- ATM newt
- From: Ron Forrester <rjf@zero-ping.com>
- Re: [ATM newt]
- From: Ron Forrester <rjf@zero-ping.com>
- Re: ATM newt
- From: Ron Forrester <rjf@zero-ping.com>
- Re: ATM newt
- From: Ron Forrester <rjf@zero-ping.com>
- Re: ATM RE: Where is Clausing?
- From: Ron Gubbins <scubadude@mediaone.net>
- Re: ATM New Feather Touch Focuser?
- From: "Ron Newman" <ronaldn@ptd.net>
- Re: testing crayfords was--ATM New Feather Touch Focuser?
- From: Ronald Newman <ronaldn@ptd.net>
- Re: ATM REALLY BIG altitude bearings
- From: "Roy Diffrient" <diffrent@bcpl.net>
- Re: ATM Center of gravity of semicircular elevation bearings
- From: "Roy Diffrient" <diffrent@bcpl.net>
- Re: ATM Woven Teflon (was REALLY BIG elevation bearings...)
- From: "Roy Diffrient" <diffrent@bcpl.net>
- Re: ATM Center of gravity of semicircular elevation bearings
- From: "Roy Diffrient" <diffrent@bcpl.net>
- Re: ATM cutting Stainless Steel?
- From: "Roy Diffrient" <diffrent@bcpl.net>
- Re: ATM cutting Stainless Steel?
- From: "Roy Diffrient" <diffrent@bcpl.net>
- Re: ATM New Feather Touch Focuser?
- From: "Roy Diffrient" <diffrent@bcpl.net>
- Re: ATM New Feather Touch Focuser?
- From: "Roy Diffrient" <diffrent@bcpl.net>
- ATM Stepping motor controller
- From: "Royston, Jeremy" <jroyston@europe.dg.com>
- ATM Machining a 16 incher
- From: Ryan Hess <atmryan@excite.com>
- Re: ATM A question of fit
- From: Ryan Hess <atmryan@excite.com>
- ATM Uneven tiles
- From: Ryan Hess <atmryan@excite.com>
- Re: ATM Uneven tiles
- From: Ryan Hess <atmryan@excite.com>
- ATM wave front/surface error confusion
- From: Ryan Hess <atmryan@excite.com>
- ATM cheap glass sources
- From: Ryan Hess <atmryan@excite.com>
- Re: ATM Removing gold coatings
- From: Ryan Hess <atmryan@excite.com>
- Re: ATM Primary mirror made of 2 pieces of glass
- From: Ryan Hess <atmryan@excite.com>
- ATM Polishing pad questions
- From: Ryan Hess <atmryan@excite.com>
- ATM Asteroid [OT]
- From: Ryan Hess <atmryan@excite.com>
- RE: ATM figuring woes
- From: "Sam Michael" <samm@idcomm.com>
- ATM Maksutov Rear Cell Design
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM Cutting Circles of Aluminum 2: Controversy!
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM Cutting Circles of Aluminum 2: Controversy!
- From: "Sam Michael" <samm@idcomm.com>
- RE: ATM Re: 17 1/4 quartz blank on eBay
- From: "Sam Michael" <samm@idcomm.com>
- ATM Maksutov Collimation.
- From: "Sam Michael" <samm@idcomm.com>
- ATM Need for cheap/used worm gear
- From: "Samuel T. Packard" <pack0028@tc.umn.edu>
- ATM book
- From: "Scott Hahn" <hahnst@home.com>
- Re: ATM Removing gold coatings
- From: Scott Milligan <starzkey@banet.net>
- ATM source of porthole glass?
- From: "Scott Neuman" <scott_neuman@hotmail.com>
- ATM magnetic altitude bearings
- From: "Scott Neuman" <scott_neuman@hotmail.com>
- Re: ATM magnetic altitude bearings
- From: "Scott Neuman" <scott_neuman@hotmail.com>
- Re: ATM Attaching and/or bending Ebony Star
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM Travel Scope size restrictions
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM Re: 17 1/4 quartz blank on eBay
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- ATM Waineo Null test Images
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- ATM P-V vs. RMS
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM P-V vs. RMS
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM Re : P-V vs. RMS
- From: Scott Rychnovsky <srychnov@chem.ps.uci.edu>
- Re: ATM REALLY BIG elavation bearings....
- From: "Sean's Box" <seantrost@mindspring.com>
- Re: ATM Carbon Composite Tube Question
- From: "Sean's Box" <seantrost@mindspring.com>
- Re: ATM Pics from Stellafane
- From: "Shane LaPierre" <shanelapierre@dellnet.com>
- Re: ATM 14.5 update
- From: Shane_Lapierre@aici.com
- ATM Geared Stepper Motors
- From: Shane_Lapierre@aici.com
- Re: ATM 14.5 update
- From: Shane_Lapierre@aici.com
- Re: ATM problem with mirror cell
- From: Shane_Lapierre@aici.com
- RE: ATM Glassboard...
- From: Shane_Lapierre@aici.com
- ATM Large mirror blanks
- From: Shane_Lapierre@aici.com
- ATM Report on new scope
- From: Shane_Lapierre@aici.com
- Re: ATM Mirror Newbie...
- From: Shane_Lapierre@aici.com
- Re: ATM 21" f/6 - Rough Grinding
- From: Shane_Lapierre@aici.com
- Re: ATM 6" mirror
- From: Shane_Lapierre@aici.com
- Re: ATM nesting aluminum tubes?
- From: Shane_Lapierre@aici.com
- Re: ATM Newt...
- From: Shane_Lapierre@aici.com
- ATM RE: Stellafane Report; Computer Assisted Digital Figure Analysis
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM PCB Layout software and manufacture for Windows
- From: "Sidor . Kurt" <KSidor@drc.com>
- ATM Source for "OFF-The shelf" half stepping -stepper controller
- From: "Simon Mander" <compulsion@btinternet.com>
- Re: ATM Source for "OFF-The shelf" half stepping -stepper controller
- From: "Simon Mander" <compulsion@btinternet.com>
- ATM Carbon Composite Tube Question
- From: "SixEastMain" <SixEastMain@worldnet.att.net>
- Re: ATM a few queries
- From: "Slater, Ken" <Ken.Slater@compaq.com>
- Re: ATM Travel Scope size restrictions
- From: "Spencer Roedder" <roedder@roedder.com>
- Re: ATM: Dang hard speculum metal
- From: Stan Truitt <truitt@maui.net>
- Re: ATM book
- From: Stan Truitt <truitt@maui.net>
- Re: Re ATM eyepiece storage box
- Re: Re ATM eyepiece storage box
- ATM Help! What Metal Lathe Size?
- ATM What is easyier for beginer?
- Re: ATM lathe and mill
- Re: ATM What is easyier for beginer?
- Re: ATM Perferating Cassegrain (slightly off topic)
- Re: ATM 16 inch blank
- ATM Re: 17 1/4 quartz blank on eBay
- Re: ATM S&T article on geodesic dome project
- Re: ATM Dew heater, more questions!!!!
- Re: ATM Spherical surfaces
- Re: ATM coring mirror
- Re: ATM 14.5 internet scope update possable conclusion...
- Re: ATM Refractor objective mounting; oil spacing
- Re: ATM on COMMERCIAL Telescopes (mildy off topic)
- Re: ATM Observing Night
- ATM Mirror Cell
- From: "Starlord" <starlord@QNET.COM>
- ATM Down with cold/flu
- From: "Starlord" <starlord@QNET.COM>
- ATM Marking center of mirror
- From: "Starman Dan" <charlesdoyle@hotmail.com>
- ATM Diamond tile cutter curve generator - low tech
- From: stephen chambers <smunch@clara.co.uk>
- Re: ATM Solid-state tilt sensor
- From: "Stephen F. Murray" <sfm@home.net>
- Re: ATM S&T article on geodesic dome project
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Cooling fans - blow sideways like the pro's
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM foucault translation, from the french
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Curious Observation
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Choosing wax to seal tile tool channels: soft and colored if possible
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM a new beamsplitter? was ATM more binoviewer nonsense
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Silicone glue?
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- Re: ATM Refractor objective mounting; oil spacing
- From: Stephen Tonkin <sft@aegis1.demon.co.uk>
- ATM Field de-rotator questions
- From: "steve" <smunch@clara.co.uk>
- RE: ATM Field De-rotator Question, and an Important Alternate Scope Design
- From: "steve" <smunch@clara.co.uk>
- ATM I've cracked it ! - help please
- From: "Steve Chambers" <smunch@clara.co.uk>
- Subject: RE: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: "The Ratcliff's" <ratcliff@golden.net>
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: "The Ratcliff's" <ratcliff@golden.net>
- Re: ATM Sag software
- From: The Silent Observer <silent1@ix.netcom.com>
- ATM Re: Recycling Grit Grader
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Portable power...
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: Re ATM Aligning finders with main scope
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM : My Cass'a'grin Project
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Marking center of mirror
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM tile tool thickness
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Re: [Telescopes] Help interpreting star test
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Re : My Cass'a'grin Project
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM size DOES matter
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM size DOES matter
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Side bearing on dobsonian
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Side bearing on dobsonian
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM 6" mirror
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Best Counterweight Material ?
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM annealing
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Thanks to all contributers
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Stepper motor from old ????? drive
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Does Adding Barlow Change Focus?
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM REALLY BIG elavation bearings....
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Mirror Problem Update
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Mirror Problem Update
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Mirror Problem Update
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Rough Figure Confirmed
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM more binoviewer nonsense
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM more binoviewer nonsense
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM more binoviewer nonsense
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM more binoviewer nonsense
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM more binoviewer nonsense
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM more binoviewer nonsense
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM more binoviewer nonsense
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM FOCAL PLANE QUESTIONS
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Removing gold coatings
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM more binoviewer nonsense
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Re: FOCAL PLANE FOUND - THANKS
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM a new beamsplitter? was ATM more binoviewer nonsense
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Re: FOCAL PLANE FOUND - THANKS
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM New Feather Touch Focuser
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM HEX Tile bonding?
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM HEX Tile bonding?
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Date: Mon, 28 Aug 2000 22:29:32 +0200
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM Candle Holder Mirror question
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM magnetic altitude bearings
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM magnetic altitude bearings
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM magnetic altitude bearings
- From: The Silent Observer <silent1@ix.netcom.com>
- Re: ATM magnetic altitude bearings
- From: The Silent Observer <silent1@ix.netcom.com>
- ATM Grit advice needed
- From: "The Wenz Family" <wenzfamily@hotmail.com>
- ATM Scratch during initial polishing...question
- From: "The Wenz Family" <wenzfamily@hotmail.com>
- Re: ATM Portable power..
- From: "Thomas A Simmons" <tasimmons@west.raytheon.com>
- Re: ATM size DOES matter
- From: "Thomas A Simmons" <tasimmons@west.raytheon.com>
- ATM 21" f/6 - Rough Grinding
- From: "Thomas A Simmons" <tasimmons@west.raytheon.com>
- ATM: Master level
- From: "Thomas A Simmons" <tasimmons@west.raytheon.com>
- Re: ATM: Where is Clausing?
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- Re: ATM grit size
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- Re: ATM Re: FOCAL PLANE FOUND - THANKS
- From: "Thomas A. Moulton" <w2vy@xanthus.net>
- Re: ATM Help! What Metal Lathe Size?
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- ATM Perferating Cassegrain primary
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- Re: ATM Perferating Cassegrain (slightly off topic)
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- ATM Gogolz #73
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- Re: ATM Gogolz #73
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- ATM Splitting a 1.5" *1" blank
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- Re: ATM astigmatism update
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- Re: ATM Splitting a 1.5" *1" blank
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- ATM is it a good idea to hot press a lap in the oven?
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- Re: ATM is it a good idea to hot press a lap in the oven?
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- Re: ATM is it a good idea to hot press a lap in the oven?
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- Re: ATM is it a good idea to hot press a lap in the oven?
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- Re: ATM board layout, what resist?
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- ATM New site.
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- ATM Preliminary test results on 4.25 F4.9
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- Re: ATM Fw: Glass thickness
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- Re: ATM reducing the weight
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- ATM Prelim test on 4.25" F4.5
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- ATM I've updated my site
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- Re: ATM I've updated my site
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- ATM Interferometers
- From: "Thomas Janstrom" <tomjan@ozemail.com.au>
- ATM Mirror Newbie...
- From: "Thomas Lawrence" <TomL@wnycs.com>
- RE: ATM Bonding Black Felt to Stained Wood
- From: "Thomas Lawrence" <TomL@wnycs.com>
- Re: ATM Cutting Circles of Aluminum 2: Controversy!
- From: Tim Walters <trwalters@mindspring.com>
- ATM Solid-state tilt sensor
- From: Tim Walters <trwalters@mindspring.com>
- ATM Combine Newton/MX916 CCD ?
- From: Timo Nordberg <mybrightstar@usa.net>
- ATM Flipmirror/filterwheel f. Newtonians
- From: Timo Nordberg <mybrightstar@usa.net>
- ATM Tim Reports 1: first spastic Foucault tests
- From: "Timothy M. Huntington" <tmh@world.std.com>
- ATM Thank you again
- From: "Timothy M. Huntington" <tmh@world.std.com>
- ATM Major Catastrophe!
- From: "Timothy M. Huntington" <tmh@world.std.com>
- ATM Major Catastrophe 2: Back to the Grind
- From: "Timothy M. Huntington" <tmh@world.std.com>
- ATM Catastrophe UPDATE
- From: "Timothy M. Huntington" <tmh@world.std.com>
- ATM Cutting circles of aluminum
- From: "Timothy M. Huntington" <tmh@world.std.com>
- ATM Cutting Circles of Aluminum 2: Controversy!
- From: "Timothy M. Huntington" <tmh@WORLD.STD.COM>
- ATM Cutting Circles of Aluminum 2: Controversy!
- From: "Timothy M. Huntington" <tmh@world.std.com>
- ATM Homegrown milling machine(?)
- From: "Timothy M. Huntington" <tmh@world.std.com>
- ATM Do I have TDE?
- From: "Timothy M. Huntington" <tmh@world.std.com>
- ATM Working out the TDE
- From: "Timothy M. Huntington" <tmh@world.std.com>
- ATM In defense of Tasco
- From: "Timothy M. Huntington" <tmh@world.std.com>
- ATM Aluminum split ring: Southern support necessary?
- From: "Timothy M. Huntington" <tmh@world.std.com>
- Re: ATM Aluminum split ring: Southern support necessary?
- From: "Timothy M. Huntington" <tmh@world.std.com>
- ATM Cleaning aluminum
- From: "Timothy M. Huntington" <tmh@world.std.com>
- ATM Thank you Scott and Michael
- From: "Timothy M. Huntington" <tmh@world.std.com>
- Re: ATM Cleaning aluminum
- From: "Timothy M. Huntington" <tmh@world.std.com>
- Re: ATM balance
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Bino viewers
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Eyepieces
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM more binoviewer nonsense
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Masking off primary?
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Center of gravity of semicircular elevation bearings
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM Cooling fans - blow sideways like the pro's
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Center of gravity of semicircular elevation bearings
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM more binoviewer nonsense
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM more binoviewer nonsense
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM glueing mirror to cell
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Need for cheap/used worm gear
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM more binoviewer nonsense
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Need for cheap/used worm gear
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM Testing 13.25" f/3.09 mirror
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- Re: ATM more binoviewer nonsense
- From: "Tom & Lou Krajci" <krajcit@3lefties.com>
- ATM pin outs for astromaster
- From: "Tom Glinos" <tg@utstat.toronto.edu>
- ATM Stellafane Report; Computer Assisted Digital Figure Analysis
- From: "Tony Cecce" <tonycc@exotrope.net>
- ATM OT : Radio Astronomy
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM : My Cass'a'grin Project
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM Re : OT Radio Astronomy
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM Re : My Cass'a'grin Project
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM My Cass'a'grin Project : Polishing continues
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM My Cass'a'grin Project
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM : My Cass'a'grin Project: Ronchi Test Results
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM OOPS
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM:Ronchi Slide
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM : Anamorphism?
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM: My Cass'a'grin Project : End of the tunnel?
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM : Additional Secondary for guiding ( was offcenter secondary)
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- Re: ATM Has anyone experimented with alternative methods?
- From: "Ulhas Deshpande" <ulhas@nagpur.dot.net.in>
- ATM Mol Sieve Vacuum Pump and aluminizing?
- From: Vance S Burnham <vburnham@juno.com>
- ATM HEX Tile bonding?
- From: vance s burnham <vburnham@juno.com>
- Re: ATM Focuser Placement Problem
- From: Vegos <yovw@rvi.net>
- Re: ATM How do I attach it??
- From: "Vero and Lisa Joseph" <joseph@interact.net.au>
- ATM 6" mirror
- Re: ATM 6" Mirror
- Re: ATM 6" mirror
- ATM astigmatism update
- ATM Mirror Problem Update
- Re: ATM Mirror Problem Update
- Re: ATM Mirror Problem Update
- Re: ATM Mirror Problem Update
- ATM Rough Figure Confirmed
- Re: ATM Mirror Problem Update
- ATM mirror update
- ATM 8.5" Candle Holder Mirror
- ATM Observing Night
- ATM aluminizing mirror
- ATM Mirror Grinding Machine
- Re: ATM Uneven tiles
- Re: ATM sharpie test
- Re: ATM Large mirror question
- Re: ATM Sharpie Test
- Re: ATM OT: Astronomical dividing head
- From: "Wallace, John B." <jbwallace@mail.arc.nasa.gov>
- ATM Mirrors and dust.....
- From: "Warren, Arnold" <arnold.warren@anl.gov>
- Re: ATM board layout, what resist?
- From: Wayne Topa <wtopa@dmcom.net>
- ATM Refractor Objective Lens
- From: "wayne_rebecca" <wayne_rebecca@iname.com>
- ATM Measuring distance from focuser to secondary...
- ATM Portable power...
- ATM Glassboard...
- ATM Kydex Kydex Kydex...
- ATM HELP! Damp garage and sonotube...
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- ATM Kleerdex Co. (Kydex) Strange experience...
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- Re: ATM REALLY BIG elevation bearings for 6 inch Dob ?
- ATM Eyepieces interfering w/light path?
- ATM Newt...
- Re: ATM Newt...
- ATM Re: In defense of blah, blah, blah...
- ATM Air circulation through a solid tube...
Mail converted by MHonArc 2.1.0