ATM Holding truss tubes in place

[Asaf Shtull-Trauring <astropal@yahoo.com>]

Hi,

I'm looking for a way to keep my truss tubes held on
my Alice design, and that they'll be sturdt but
removable. I didn't understand Ron Ravenberg's way. If
I would take 2 pieces of wood, and connect them in a
90 degree angle to the mirror box side, would it be
sefficant ti hold the truss tube in place? My two
concerns are that the pieces of wood might block the
mirror, and also if I need to connect wood to the
focuser board, I wont be able to make it fit into the
mirror box when the telescope is collapesed. So, does
anyone have a good simple idea?

I tried to use pipes, but it's not usefull...
===
----------------------------------------
Asaf Shtull-Trauring, Amateur Astronomer
http://www.maxnm.com/asaf/
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com