Mirror Cells

MMARULLA@mailgw.sanders.lockheed.com
Wed, 19 Apr 1995 11:34:56 -0400

>You don't tighten anything. The mirror rests on three ball bearings
>and is held in place by three blobs of silicone glue. In other words:
>
>1. Place your three ball bearings down. (I probably would drill
> little divets for them to rest in.) Bob actually may have
> suggested using BBs. You want them to be small.
>2. Cover 'em with silicone glue.
>3. Place the mirror on top and let dry.

>This is similar to the nails that Berry uses as spacers, but you
>never remove 'em.

Then you don't have a floatation system at all, your mirror is resting on three hard, immobile points.

- Matt http://www.webcom.com/~atm/