[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [ATM] Figuring Methods

To: "'Jerry'" <wa4guu@verizon.net>, "'Mike Lockwood'" <melockwo@uiuc.edu>, <atm@atmlist.net>
Subject: Re: [ATM] Figuring Methods
From: "Jerry" <wa4guu@verizon.net>
Date: Fri, 28 Apr 2006 20:20:18 -0400
Importance: Normal
In-reply-to: <000901c66b1e$b7cc0570$0100a8c0@D85SJB21>
List-Archive: <http://www.atmlist.net/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

Regarding the previous post...


I realize a poor choice of words that may have confused my meaning

There is a maximum pressure that I would use to apply accented pressure.

But if I say to work a zone start with slight.... and increase to maximum, I
mean the maximum that you are going to use for this session.  That can be
much less than the maximum ever used on that size mirror.

Jerry

_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] Figuring Methods
  - From: "Jerry" <wa4guu@verizon.net>

References:
- [ATM] Figuring Methods
  - From: "Jerry" <wa4guu@verizon.net>

Prev by Author: [ATM] Figuring Methods
Next by Author: Re: [ATM] Figuring Methods
Prev by thread: [ATM] Figuring Methods
Next by thread: Re: [ATM] Figuring Methods
Index(es):
- Author
- Thread