Re: [ATM] Fixing Tom's oblate sphere

["Polk, Tom" <TPolk@decatur-al.gov>]

)

-----Original Message-----
From: atm-bounces@atmlist.net [mailto:atm-bounces@atmlist.net] On Behalf
Of Mike Lockwood
>>SNIPPED a lot of good information, but not relative to my reply.<<

The center came down.  I wouldn't be surprised if the polish is much
better there too.  That is probably from the MOT work.

**** Yes, it is. It surprised me how close it came to polishing out the
center.

What you really want to get rid of is the rolled edge.  That will just
take time.  Comparing with your old photo, it didn't change.

**** Yeah, that was my thoughts too. Bummer.

>>SNIP<<

How much weight are you pressing with?


**** Cold Pressing? Just the weight of the tool, say ~10 lbs. During
polishing nothing other than the accented pressure of my hands for TOT,
just enough to hang on for MOT.

>>SNIP<<

	Mike L.

***** Thanks Mike. *****

Tom Polk
_______________________________________________
ATM mailing list http://www.atmlist.net/