Amateur Telescope Makers (ATM) Archive for APR06 - by author

• Thread Index

• [ATM] New 16" ultralight telescope
  • From: "Alan Scott" <alanne1956@hotmail.com>
• Re: [ATM] New 16" ultralight telescope
  • From: "Alan Scott" <alanne1956@hotmail.com>
• Re: [ATM] New 16" ultralight telescope
  • From: "Alan Scott" <alanne1956@hotmail.com>
• [ATM] LTW to Focault
  • From: "Alfredo Rainho Neves" <aneves@snowsoft.biz>
• Re: [ATM] start...tool....
  • From: "Alt Blank" <alt.blank@gmail.com>
• [ATM] Foucault Test Analysis 2.0B
  • From: Andreas Reifke <Andreas.Reifke@web.de>
• Re: [ATM] Newtonian Alt-Az with Level Focuser Position
  • From: Andy Saulietis <iss@pvtnetworks.net>
• [ATM] Lateral Wire Test
  • From: aneves <aneves@snowsoft.biz>
• [ATM] Filter help needed
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] Filter help needed
  • From: Anthony Stillman <atmer@flash.net>
• [ATM] Wratten Filter Transmission Curves
  • From: Anthony Stillman <atmer@flash.net>
• Re: [ATM] ATM Digest, Vol 28, Issue 20
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] Electronics help needed - temperature control
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• Re: [ATM] How to Reduce Bearing Friction
  • From: "Arjan te Marvelde" <arjan.te.marvelde@hetnet.nl>
• [ATM] Optical Mouse for shaft encoders.
  • From: "Bill Hollenbach" <wjh1@absamail.co.za>
• Re: [ATM] First Timer Polishing Questions
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Book Review.... sort of
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] Fkex Mirror.
  • From: "Bill Kelley" <flex@commspeed.net>
• Re: [ATM] First Timer Polishing Questions
  • From: Bill Prewitt <bprewitt@neo.rr.com>
• Re: [ATM] wedge in lenses
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Newtonian Alt-Az with Level Focuser Position
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Amateurish question regarding a CP for a parabola
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Newtonian Alt-Az with Level Focuser Position
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] How to make clean(er) html for web pages in MS Word
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] start...tool....
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] First Timer Polishing Questions
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] First Timer Polishing Questions
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Electronics help needed - temperature control
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] TDE (That Darned Edge)
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] Figuring Methods
  • From: "Bob May" <bobmay@nethere.com>
• Re: [ATM] start...tool....
  • From: "Bob P. Sumitro" <bsumitro@mandirisek.co.id>
• Re: [ATM] Rodenstock Heligons
  • From: "Bruce MacDonald" <brumac@gmail.com>
• Re: [ATM] start...tool....
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• Re: [ATM] start...tool....
  • From: Charles Mitchard <charlesmitchard@iinet.net.au>
• Re: [ATM] Electronics help needed - temperature control
  • From: Chris Welsh <chris.welsh@rogers.com>
• Re: [ATM] How to Reduce Bearing Friction
  • From: "Christopher Todd" <christopher.todd@gmail.com>
• Re: [ATM] Newtonian Alt-Az with Level Focuser Position
  • From: Dale Eason <atmpob@yahoo.com>
• [ATM] Hi resolution interferometry of mirror surface
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Hi resolution interferometry of mirror surface
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Hi resolution interferometry of mirror surface
  • From: Dale Eason <atmpob@yahoo.com>
• Re: [ATM] Newtonian Alt-Az with Level Focuser Position
  • From: Dan Newman <dan.newman+atm@mtbaldy.us>
• Re: [ATM] Lasix and better viewing
  • From: Daniel Fundo <fundo@bellsouth.net>
• Re: [ATM] Electronics help needed - temperature control
  • From: Dave Smith <smithersscope@yahoo.com>
• [ATM] Large Schmidt Camera?
  • From: "David Sleeter" <d.sleeter@adelphia.net>
• Re: [ATM] Dominic-Luc Webb's Question about Big Spheical Mirror
  • From: "David Sleeter" <d.sleeter@adelphia.net>
• [ATM] variable names in 1800's optical schematics
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Large Schmidt Camera?
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] {Spam?} Re: Large Schmidt Camera?
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Wratten Filter Transmission Curves
  • From: Dominic-Luc Webb <dlwebb@canit.se>
• Re: [ATM] Electronics help needed - temperature control
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Electronics help needed - temperature control
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Electronics help needed - temperature control
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Electronics help needed - temperature control
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Conical mirror question
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Electronics help needed - temperature control
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Electronics help needed - temperature control
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Electronics help needed - temperature control
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Electronics help needed - temperature control
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Electronics help needed - temperature control
  • From: "Don Clement" <clement.focuser@verizon.net>
• Re: [ATM] Newtonian Alt-Az with Level Focuser Position
  • From: "Donald Good" <donald.good@comcast.net>
• Re: [ATM] How to Reduce Bearing Friction
  • From: "Donald Good" <donald.good@comcast.net>
• [ATM] Coma Corrector / Corrected Newtonian
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• Re: [ATM] Conical mirror question
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• Re: [ATM] Filter help needed
  • From: "Dream - Telescopes & Accessories, Inc." <shane@dreamscopes.com>
• Re: [ATM] Rodenstock Heligons
  • From: "Ellen Mackenzie" <mackenzieconsulting@sympatico.ca>
• Re: [ATM] ATM re: large Schmidt camera?
  • From: George Anderson <tillerman1@videotron.ca>
• Re: [ATM] Atlast
  • From: GF <gary@rcn.com>
• Re: [ATM] start...tool....
  • From: GF <gary@rcn.com>
• [ATM] Flex mirror - have you made one, any failures, any successes,any hints?
  • From: Gil McFarlane <gilboastro@yahoo.com>
• [ATM] Electronics help needed - temperature control
  • From: Gil McFarlane <gilboastro@yahoo.com>
• [ATM] Electronics help needed - temperature control
  • From: Gil McFarlane <gilboastro@yahoo.com>
• Re: [ATM] How to Reduce Bearing Friction
  • From: Gilbert Gagne <ggagne@clearwire.net>
• Re: [ATM] Amateurish question regarding a CP for a parabola
  • From: "Greg Jones" <gregj888@comcast.net>
• Re: [ATM] Lasix and better viewing
  • From: Grumpa1 <jjdubois@insightbb.com>
• Re: [ATM] First Timer Polishing Questions
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] First Timer Polishing Questions
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Book Review.... sort of
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] TDE (That Darned Edge)
  • From: Guy Brandenburg <gfbrandenburg@yahoo.com>
• Re: [ATM] Atlast
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Atlast
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] start...tool....
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Test
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] foucault/Tex question
  • From: hermit <hermit@outofoptions.org>
• [ATM] Any one interested in speaking in PA?
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Conical mirror question
  • From: hermit <hermit@outofoptions.org>
• Re: [ATM] Filter help needed
  • From: hermit <hermit@outofoptions.org>
• [ATM] What They Say and What They Really Mean in Astronomy
  • From: James P Crombie <jpcrombie@pei.eastlink.ca>
• Re: [ATM] Optical Mouse for shaft encoders.
  • From: "Jan Grecner" <jan.grecner@telecom.cz>
• Re: [ATM] Rodenstock Heligons
  • From: Jay LeBlanc <jaleblan@dakotacom.net>
• Re: [ATM] TDE (That Darned Edge)
  • From: "jcmulherin" <jcmulherin@opticalmechanics.com>
• Re: [ATM] TDE (That Darned Edge)
  • From: "jcmulherin" <jcmulherin@opticalmechanics.com>
• Re: [ATM] TDE (That Darned Edge)
  • From: "jcmulherin" <jcmulherin@opticalmechanics.com>
• [ATM] ATM: mirror blanks and micrometers
  • From: "Jeff Baldwin" <bald@centurytel.net>
• Re: [ATM] Stellafane website
  • From: Jeff Lowe <lowe@nanotechsys.com>
• [ATM] foucault/Tex question
  • From: jeff newsom <triolian@earthlink.net>
• Re: [ATM] Ronchi interpretation and corrective action for high zoneat edge
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Ronchi interpretation and corrective action for highzoneatedge
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Ronchi interpretation and corrective action for highzoneatedge
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Test
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] A much belated update on various projects! Glasscastingandother things.
  • From: "Jerry" <wa4guu@verizon.net>
• [ATM] Stellafane website
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] First Timer Polishing Questions
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] First Timer Polishing Questions
  • From: "Jerry" <wa4guu@verizon.net>
• [ATM] Book Review.... sort of
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] [atm_free] Book Review.... sort of
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Book Review.... sort of
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Book Review.... sort of
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] TDE (That Darned Edge)
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] TDE (That Darned Edge)
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] TDE (That Darned Edge)
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] TDE (That Darned Edge)
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] TDE (That Darned Edge)
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] TDE (That Darned Edge)
  • From: "Jerry" <wa4guu@verizon.net>
• [ATM] Figuring Methods
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Figuring Methods
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Figuring Methods
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Figuring Methods
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Figuring Methods
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Figuring Methods
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Figuring Methods
  • From: "Jerry" <wa4guu@verizon.net>
• Re: [ATM] Figuring Methods
  • From: "Jerry" <wa4guu@verizon.net>
• [ATM] Amateurish question regarding a CP for a parabola
  • From: "Jim" <jim@idexer.com>
• Re: [ATM] Amateurish question regarding a CP for a parabola
  • From: "Jim" <jim@idexer.com>
• Re: [ATM] start...tool....
  • From: "Jim" <jim@idexer.com>
• Re: [ATM] New 16" ultralight telescope
  • From: "Jim" <jim@idexer.com>
• Re: [ATM] New 16" ultralight telescope
  • From: "Jim" <jim@idexer.com>
• Re: [ATM] Large Schmidt Camera?
  • From: "Jim" <jim@idexer.com>
• Re: [ATM] Large Schmidt Camera?
  • From: Joe <nss@mwt.net>
• [ATM] Fkex Mirror.
  • From: Joe <nss@mwt.net>
• Re: [ATM] Lasix and better viewing
  • From: Joe <nss@mwt.net>
• [ATM] Newtonian Alt-Az with Level Focuser Position
  • From: John Downie <johnny999_99@yahoo.com>
• Re: [ATM] Newtonian Alt-Az with Level Focuser Position
  • From: John Downie <johnny999_99@yahoo.com>
• Re: [ATM] Newtonian Alt-Az with Level Focuser Position
  • From: John Downie <johnny999_99@yahoo.com>
• Re: [ATM] start...tool....
  • From: John Lynch <john_lynch2006@yahoo.com>
• Re: [ATM] Newtonian Alt-Az with Level Focuser Position
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] New 16" ultralight telescope
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] How to Reduce Bearing Friction
  • From: "John Sherman" <atm@johnspics.com>
• Re: [ATM] good news
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] good news
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] good news
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] good news
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] good news
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Electronics help needed - temperature control
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] New 16" ultralight telescope
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] New 16" ultralight telescope
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] TDE (That Darned Edge)
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Lasix and better viewing
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] How to Reduce Bearing Friction
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] TDE (That Darned Edge)
  • From: Ken Hunter <atm_ken_hunter@yahoo.com>
• Re: [ATM] Electronics help needed - temperature control
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Electronics help needed - temperature control
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Electronics help needed - temperature control
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Electronics help needed - temperature control
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] How to Reduce Bearing Friction
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Figuring Methods
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Figuring Methods
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Figuring Methods
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• Re: [ATM] Figuring Methods
  • From: Kevin MIchael Zabbo <chaosopher23@yahoo.com>
• DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA
  • From: Mail System Internal Data <MAILER-DAEMON@astro.umsystem.edu>
• Re: [ATM] Optical Mouse for shaft encoders.
  • From: marinus van der Lugt <lugt@xs4all.nl>
• [ATM] How to make clean(er) html for web pages in MS Word
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] How to make clean(er) html for web pages in MS Word
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] start...tool....
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] start...tool....
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] start...tool....
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] start...tool....
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] First Timer Polishing Questions
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Electronics help needed - temperature control
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Electronics help needed - temperature control
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] First Timer Polishing Questions
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Electronics help needed - temperature control
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Electronics help needed - temperature control
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] First Timer Polishing Questions
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] ATM Digest, Vol 28, Issue 20
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] First Timer Polishing Questions
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Electronics help needed - temperature control
  • From: Mark Holm <mdholm@telerama.com>
• Re: [ATM] Electronics help needed - temperature control
  • From: "matt" <electro_optic@bellsouth.net>
• [ATM] First Timer Polishing Questions
  • From: "Meeks Robert-PT1784" <bob.meeks@motorola.com>
• Re: [ATM] First Timer Polishing Questions
  • From: "Meeks Robert-PT1784" <bob.meeks@motorola.com>
• Re: [ATM] First Timer Polishing Questions
  • From: "Meeks Robert-PT1784" <bob.meeks@motorola.com>
• [ATM] TDE (That Darned Edge)
  • From: "Meeks Robert-PT1784" <bob.meeks@motorola.com>
• Re: [ATM] Figuring Methods
  • From: "Mel Bartels" <mbartels@bbastrodesigns.com>
• Re: [ATM] Figuring Methods
  • From: Michael Lindner <mikell@optonline.net>
• Re: [ATM] Large Schmidt Camera?
  • From: Michael Peck <mlpeck@hughes.net>
• [ATM] A much belated update on various projects! Glass
  • From: "Miguel" <emiliarodriguez@bellsouth.net>
• Re: [ATM] Ronchi interpretation and corrective action for high zoneat edge
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Fixing Tom's oblate sphere
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] First Timer Polishing Questions
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Electronics help needed - temperature control
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] 9" scope photos
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] New 16" ultralight telescope
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] Book Review.... sort of
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] TDE (That Darned Edge)
  • From: Mike Lockwood <melockwo@uiuc.edu>
• Re: [ATM] TDE (That Darned Edge)
  • From: Mike Lockwood <melockwo@uiuc.edu>
• [ATM] Conical mirror question
  • From: Mike Shuken <mikeshuken@value.net>
• [ATM] Lasix and better viewing
  • From: Mike Shuken <mikeshuken@value.net>
• Re: [ATM] How to Reduce Bearing Friction
  • From: Milton Waddam <milton_waddam@yahoo.com>
• Re: [ATM] Figuring Methods (Kevin MIchael Zabbo)
  • From: "Mutalib Abdallah" <omegatroid@hotmail.com>
• Re: [ATM] New 16" ultralight telescope
  • From: NGC704@aol.com
• Re: [ATM] 9" scope photos
  • From: NGC704@aol.com
• Re: [ATM] Lateral Wire Test
  • From: Nils Olof Carlin <nilsolof.carlin@telia.com>
• Re: [ATM] LTW to Focault
  • From: "Nils Olof Carlin" <nilsolof.carlin@telia.com>
• Re: [ATM] How to make cleaner HTML
  • From: ntent <ntent@pctcnet.net>
• [ATM] Lap stored over winter
  • From: "Paul Bradley" <paul@paul-bradley.com>
• Re: [ATM] Lap stored over winter
  • From: "Paul Bradley" <paul@paul-bradley.com>
• Re: [ATM] How to make clean(er) html for web pages in MS Word
  • From: Pete <lenses@adelphia.net>
• [ATM] How to Reduce Bearing Friction
  • From: "Peter" <peter@kitgear.com>
• [ATM] wedge in lenses
  • From: Peter Abrahams <telscope@europa.com>
• [ATM] Subject: Building 2 mirror RACI for bi-refractor
  • From: Peter Abrahams <telscope@europa.com>
• [ATM] Ronchi interpretation and corrective action for high zone atedge
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] Ronchi interpretation and corrective action for high zoneat edge
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] Ronchi interpretation and corrective action for high zoneatedge
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] Fixing Tom's oblate sphere
  • From: "Polk, Tom" <TPolk@decatur-al.gov>
• Re: [ATM] First Timer Polishing Questions
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Figuring Methods
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] How to Reduce Bearing Friction
  • From: Richard <cnc@cncservo.co.uk>
• Re: [ATM] Amateurish question regarding a CP for a parabola
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] Amateurish question regarding a CP for a parabola
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• [ATM] 125 mm f/12 Apochromatic Triplet
  • From: "Richard F.L.R. Snashall" <rflrs@rcn.com>
• Re: [ATM] start...tool....
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] start...tool....
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] start...tool....
  • From: "Richard Ozer" <rozer@pacbell.net>
• Re: [ATM] Lasix and better viewing
  • From: "RodShea" <RodShea@comcast.net>
• [ATM] Atlast
  • From: Saqib Sajjad <saqibsajjad@yahoo.com>
• Re: [ATM] Atlast
  • From: Saqib Sajjad <saqibsajjad@yahoo.com>
• Re: [ATM] good news
  • From: Saqib Sajjad <saqibsajjad@yahoo.com>
• Re: [ATM] At Last
  • From: Saqib Sajjad <saqibsajjad@yahoo.com>
• Re: [ATM] good news
  • From: Saqib Sajjad <saqibsajjad@yahoo.com>
• Re: [ATM] good news
  • From: Saqib Sajjad <saqibsajjad@yahoo.com>
• Re: [ATM] good news
  • From: Saqib Sajjad <saqibsajjad@yahoo.com>
• [ATM] start...tool....
  • From: Saqib Sajjad <saqibsajjad@yahoo.com>
• Re: [ATM] start...tool....
  • From: Saqib Sajjad <saqibsajjad@yahoo.com>
• [ATM] test
  • From: "Scott Ewart" <scotte@frontiernet.net>
• Re: [ATM] How to Reduce Bearing Friction
  • From: "Scott Ewart" <scotte@frontiernet.net>
• [ATM] 25x100 binoculars are f/4.5 achromats. Hmmmn?
  • From: "stU" <stu@aaronj.com>
• [ATM] Building 2 mirror RACI for bi-refractor
  • From: "stU" <stu@aaronj.com>
• Re: [ATM] Newtonian Alt-Az with Level Focuser Position
  • From: "The Alarm Co." <tac@i1.net>
• [ATM] ATM re: large Schmidt camera?
  • From: "The Alarm Co." <tac@i1.net>
• Re: [ATM] Stellafane website
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] First Timer Polishing Questions
  • From: "Thomas A. Moulton" <tom@moulton.us>
• Re: [ATM] start...tool....
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] start...tool....
  • From: "Thomas Janstrom" <thomas@moiler.com>
• [ATM] A much belated update on various projects! Glass casting andother things.
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] A much belated update on various projects! Glass castingandother things.
  • From: "Thomas Janstrom" <thomas@moiler.com>
• Re: [ATM] Conical mirror question
  • From: "Thomas Janstrom" <thomas@moiler.com>
• [ATM] Test
  • From: Thomas Rutherford <rutherfordt@earthlink.net>
• Re: [ATM] Lasix and better viewing
  • From: Tom Conlin <tomc@cs.uoregon.edu>
• Re: [ATM] Large Schmidt Camera?
  • From: "tony gondola" <acgna@comcast.net>
• Re: [ATM] At Last
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• [ATM] Re :My GermanEquatorial Mount
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• Re: [ATM] How to make clean(er) html for web pages in MS Word
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• Re: [ATM] Grinding tool for Saqib
  • From: Ulhas Deshpande <ulhas_ngp@sancharnet.in>
• Re: [ATM] Amateurish question regarding a CP for a parabola
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] good news
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] start...tool....
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] start...tool....
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] Lap stored over winter
  • From: "Vladimir Galogaza" <vladimir.galogaza@zg.htnet.hr>
• Re: [ATM] wedge in lenses
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] wedge in lenses
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] wedge in lenses
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] wedge in lenses
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] Large Schmidt Camera?
  • From: "vladimir sacek" <vla@toast.net>
• Re: [ATM] Large Schmidt Camera?
  • From: "vladimir sacek" <vla@toast.net>
• [ATM] The ultrathin projects
  • From: vorblesnak@peak.org
• Re: [ATM] How to make clean(er) html for web pages in MS Word
  • From: Woodchuck <djv@bedford.net>