[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[ATM] scatterplate

To: "The Amateur Telescope Makers List" <atm@atmlist.net>
Subject: [ATM] scatterplate
From: "Bill Kelley" <flex@commspeed.net>
Date: Tue, 26 Apr 2005 14:42:04 -0700
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

ATMers,
My recently deceased friend and TM, Howard Moore, left me with a small , 
unopened package marked in pen," scatterplate for laser interferometry ".
The reverse side says " manufactured by CLAY-ADAMS Inc. N.Y.
 No.A-1630". It is not my intention to construct an interferometer and have 
only a rudimentary understanding as to its purpose. Advice needed.
Thanks,
Bill Kelley 


_______________________________________________
ATM mailing list http://www.atmlist.net/

Follow-Ups:
- Re: [ATM] scatterplate
  - From: "Bob May" <bobmay@nethere.com>

Prev by Author: Re: [ATM] Intentional astigmatism
Next by Author: [ATM] scatterplate
Prev by thread: Re: [ATM] RossNullXP, a new program based on an old program
Next by thread: Re: [ATM] scatterplate
Index(es):
- Author
- Thread