[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re[2]: [ATM] Use of bearings in (static) mirror cells

Hi Jerry,

Has anybody tried a compliant edge support, such as a short
section of tube fixed to the telescope, say 10mm bigger radius
than the mirror, with that 10mm gap filled all round with a high
compliance silicone RTV ?. I can't think of a more gentle edge
support which both spreads the load and is fairly easy and cheap
to build.

-- 

Best regards,
 Richard



_______________________________________________
ATM mailing list http://www.atmlist.net/