[ATM] Making Composite Parts and Telescope Tubes

["Peter" <peter@kitgear.com>]

Hi,

I've been away for a short while but I see that over the past week there are
some questions regarding how to make fiberglass / carbon fiber tubes and
parts. Here are some web sites which I've found to be very insighful on this
topic.

X-Scope 12.5" - Making a Carbon Fiber Tube Newtonian:
http://www.berfield.com/X-Scope.html

Composite tube reinforcement for model rockets:
http://www.info-central.org/construction_composites.shtml

Vacuum Bagging your tubes:
http://www.info-central.org/construction_vacuumbagging.shtml

Vacuum Bagging Basics:
http://bertram31.com/proj/tips/vaccuum.htm

http://www.fibreglast.com/contentpages-vacuum+bagging+equipment+and+techniqu
es+for+room-temp+applications-230.html

http://www.pilotsguide.com/rc/vacbag.shtml

Composite Basics:
http://members.eaa.org/home/homebuilders/authors/alexander/index.html



Composite Scopes on the Net:
============================

Cord's 24" f/4 scope.
http://www.geocities.com/ultralight24f4/

German ATM built 20" scope. Ok not an all composite scope but it sure is
a cool looking scope!
http://people.freenet.de/atmpw/bildergalerie.html

Dan Gray's 28" String and composite scope:
http://www.siderealtechnology.com/28inch/

Hope this helps,

Peter

_______________________________________________
ATM mailing list http://www.atmlist.net/