[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

RE: [ATM] Use of bearings in (static) mirror cells

To: "'James Lerch'" <jlerch1@tampabay.rr.com>, "'ATM'" <atm@atmlist.net>
Subject: RE: [ATM] Use of bearings in (static) mirror cells
From: "Jerry" <wa4guu@verizon.net>
Date: Sat, 23 Apr 2005 12:17:38 -0400
Importance: Normal
In-reply-to: <044501c54815$03d793e0$6502a8c0@NewToy>
List-Archive: <http://home.simoivanov.com/pipermail/atm>
List-Help: <mailto:atm-request@atmlist.net?subject=help>
List-Id: The Amateur Telescope Makers List <atm.atmlist.net>
List-Post: <mailto:atm@atmlist.net>
List-Subscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=subscribe>
List-Unsubscribe: <http://www.atmlist.net/mailman/listinfo.cgi/atm>,<mailto:atm-request@atmlist.net?subject=unsubscribe>
Sender: atm-bounces@atmlist.net

That is what I was unsure of, if we where talking no edge support at all or
both with and without edge support. There is a difference between gluing to
prevent mirror and cell disengagement and gluing for support. Arjan is
saying don't glue. And while I am not a proponent gluing the comments about
the stictionsess flex bearings/hinges by Don Clement has brought me around
somewhat.


Jerry



_______________________________________________
ATM mailing list http://www.atmlist.net/

References:
- Re: [ATM] Use of bearings in (static) mirror cells
  - From: "James Lerch" <jlerch1@tampabay.rr.com>

Prev by Author: RE: [ATM] Use of bearings in (static) mirror cells
Next by Author: RE: [ATM] Use of bearings in (static) mirror cells
Prev by thread: Re: [ATM] Use of bearings in (static) mirror cells
Next by thread: Re: [ATM] Use of bearings in (static) mirror cells
Index(es):
- Author
- Thread